diff mbox series

[v2,5/5] arm64: dts: qcom: sa8775p-ride: enable remoteprocs

Message ID 20240527-topic-lemans-iot-remoteproc-v2-5-8d24e3409daf@linaro.org (mailing list archive)
State Superseded
Headers show
Series arm64: qcom: sa8775p: enable remoteprocs - ADSP, CDSP and GPDSP | expand

Commit Message

Bartosz Golaszewski May 27, 2024, 8:43 a.m. UTC 
From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Enable all remoteproc nodes on the sa8775p-ride board and point to the
appropriate firmware files.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
---
 arch/arm64/boot/dts/qcom/sa8775p-ride.dts | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

Comments

Dmitry Baryshkov May 27, 2024, 9:31 a.m. UTC | #1 
On Mon, May 27, 2024 at 10:43:52AM +0200, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> 
> Enable all remoteproc nodes on the sa8775p-ride board and point to the
> appropriate firmware files.
> 
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> ---
>  arch/arm64/boot/dts/qcom/sa8775p-ride.dts | 25 +++++++++++++++++++++++++
>  1 file changed, 25 insertions(+)
> 

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
index 26ad05bd3b3f..071fcaf09364 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
+++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
@@ -727,6 +727,31 @@  &pcie1_phy {
 	status = "okay";
 };
 
+&remoteproc_adsp {
+	firmware-name = "qcom/sa8775p/adsp.mbn";
+	status = "okay";
+};
+
+&remoteproc_cdsp0 {
+	firmware-name = "qcom/sa8775p/cdsp0.mbn";
+	status = "okay";
+};
+
+&remoteproc_cdsp1 {
+	firmware-name = "qcom/sa8775p/cdsp1.mbn";
+	status = "okay";
+};
+
+&remoteproc_gpdsp0 {
+	firmware-name = "qcom/sa8775p/gpdsp0.mbn";
+	status = "okay";
+};
+
+&remoteproc_gpdsp1 {
+	firmware-name = "qcom/sa8775p/gpdsp1.mbn";
+	status = "okay";
+};
+
 &uart10 {
 	compatible = "qcom,geni-debug-uart";
 	pinctrl-0 = <&qup_uart10_default>;