@@ -126,6 +126,7 @@
/git-rebase
/git-receive-pack
/git-reflog
+/git-refs
/git-remote
/git-remote-http
/git-remote-https
new file mode 100644
@@ -0,0 +1,62 @@
+git-refs(1)
+===========
+
+NAME
+----
+
+git-refs - Low-level access to refs
+
+SYNOPSIS
+--------
+
+[verse]
+'git refs migrate' --ref-format=<format> [--dry-run]
+
+DESCRIPTION
+-----------
+
+This command provides low-level access to refs.
+
+COMMANDS
+--------
+
+migrate::
+ Migrate ref store between different formats.
+
+OPTIONS
+-------
+
+The following options are specific to 'git refs migrate':
+
+--ref-format=<format>::
+ The ref format to migrate the ref store to. Can be one of:
++
+include::ref-storage-format.txt[]
+
+--dry-run::
+ Perform the migration, but do not modify the repository. The migrated
+ refs will be written into a separate directory that can be inspected
+ separately. The name of the directory will be reported on stdout. This
+ can be used to double check that the migration works as expected doing
+ performing the actual migration.
+
+KNOWN LIMITATIONS
+-----------------
+
+The ref format migration has several known limitations in its current form:
+
+* It is not possible to migrate repositories that have reflogs.
+
+* It is not possible to migrate repositories that have worktrees.
+
+* There is no way to block concurrent writes to the repository during an
+ ongoing migration. Concurrent writes can lead to an inconsistent migrated
+ state. Users are expected to block writes on a higher level. If your
+ repository is registered for scheduled maintenance, it is recommended to
+ unregister it first with git-maintenance(1).
+
+These limitations may eventually be lifted.
+
+GIT
+---
+Part of the linkgit:git[1] suite
@@ -1283,6 +1283,7 @@ BUILTIN_OBJS += builtin/read-tree.o
BUILTIN_OBJS += builtin/rebase.o
BUILTIN_OBJS += builtin/receive-pack.o
BUILTIN_OBJS += builtin/reflog.o
+BUILTIN_OBJS += builtin/refs.o
BUILTIN_OBJS += builtin/remote-ext.o
BUILTIN_OBJS += builtin/remote-fd.o
BUILTIN_OBJS += builtin/remote.o
@@ -207,6 +207,7 @@ int cmd_rebase(int argc, const char **argv, const char *prefix);
int cmd_rebase__interactive(int argc, const char **argv, const char *prefix);
int cmd_receive_pack(int argc, const char **argv, const char *prefix);
int cmd_reflog(int argc, const char **argv, const char *prefix);
+int cmd_refs(int argc, const char **argv, const char *prefix);
int cmd_remote(int argc, const char **argv, const char *prefix);
int cmd_remote_ext(int argc, const char **argv, const char *prefix);
int cmd_remote_fd(int argc, const char **argv, const char *prefix);
new file mode 100644
@@ -0,0 +1,75 @@
+#include "builtin.h"
+#include "parse-options.h"
+#include "refs.h"
+#include "repository.h"
+#include "strbuf.h"
+
+#define REFS_MIGRATE_USAGE \
+ N_("git refs migrate --ref-format=<format> [--dry-run]")
+
+static int cmd_refs_migrate(int argc, const char **argv, const char *prefix)
+{
+ const char * const migrate_usage[] = {
+ REFS_MIGRATE_USAGE,
+ NULL
+ };
+ const char *format_str = NULL;
+ enum ref_storage_format format;
+ unsigned int flags = 0;
+ struct option options[] = {
+ OPT_STRING_F(0, "ref-format", &format_str, N_("format"),
+ N_("specify the reference format to convert to"),
+ PARSE_OPT_NONEG),
+ OPT_BIT(0, "dry-run", &flags,
+ N_("perform a non-destructive dry-run"),
+ REPO_MIGRATE_REF_STORAGE_FORMAT_DRYRUN),
+ OPT_END(),
+ };
+ struct strbuf errbuf = STRBUF_INIT;
+ int err;
+
+ argc = parse_options(argc, argv, prefix, options, migrate_usage, 0);
+ if (argc)
+ usage(_("too many arguments"));
+ if (!format_str)
+ usage(_("missing --ref-format=<format>"));
+
+ format = ref_storage_format_by_name(format_str);
+ if (format == REF_STORAGE_FORMAT_UNKNOWN) {
+ err = error(_("unknown ref storage format '%s'"), format_str);
+ goto out;
+ }
+
+ if (the_repository->ref_storage_format == format) {
+ err = error(_("repository already uses '%s' format"),
+ ref_storage_format_to_name(format));
+ goto out;
+ }
+
+ if (repo_migrate_ref_storage_format(the_repository, format, flags, &errbuf) < 0) {
+ err = error("%s", errbuf.buf);
+ goto out;
+ }
+
+ err = 0;
+
+out:
+ strbuf_release(&errbuf);
+ return err;
+}
+
+int cmd_refs(int argc, const char **argv, const char *prefix)
+{
+ const char * const refs_usage[] = {
+ REFS_MIGRATE_USAGE,
+ NULL,
+ };
+ parse_opt_subcommand_fn *fn = NULL;
+ struct option opts[] = {
+ OPT_SUBCOMMAND("migrate", &fn, cmd_refs_migrate),
+ OPT_END(),
+ };
+
+ argc = parse_options(argc, argv, prefix, opts, refs_usage, 0);
+ return fn(argc, argv, prefix);
+}
@@ -594,6 +594,7 @@ static struct cmd_struct commands[] = {
{ "rebase", cmd_rebase, RUN_SETUP | NEED_WORK_TREE },
{ "receive-pack", cmd_receive_pack },
{ "reflog", cmd_reflog, RUN_SETUP },
+ { "refs", cmd_refs, RUN_SETUP },
{ "remote", cmd_remote, RUN_SETUP },
{ "remote-ext", cmd_remote_ext, NO_PARSEOPT },
{ "remote-fd", cmd_remote_fd, NO_PARSEOPT },
new file mode 100755
@@ -0,0 +1,243 @@
+#!/bin/sh
+
+test_description='migration of ref storage backends'
+
+GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main
+export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME
+
+TEST_PASSES_SANITIZE_LEAK=true
+. ./test-lib.sh
+
+test_migration () {
+ git -C "$1" for-each-ref --include-root-refs \
+ --format='%(refname) %(objectname) %(symref)' >expect &&
+ git -C "$1" refs migrate --ref-format="$2" &&
+ git -C "$1" for-each-ref --include-root-refs \
+ --format='%(refname) %(objectname) %(symref)' >actual &&
+ test_cmp expect actual &&
+
+ git -C "$1" rev-parse --show-ref-format >actual &&
+ echo "$2" >expect &&
+ test_cmp expect actual
+}
+
+test_expect_success 'setup' '
+ rm -rf .git &&
+ # The migration does not yet support reflogs.
+ git config --global core.logAllRefUpdates false
+'
+
+test_expect_success "superfluous arguments" '
+ test_when_finished "rm -rf repo" &&
+ git init repo &&
+ test_must_fail git -C repo refs migrate foo 2>err &&
+ cat >expect <<-EOF &&
+ usage: too many arguments
+ EOF
+ test_cmp expect err
+'
+
+test_expect_success "missing ref storage format" '
+ test_when_finished "rm -rf repo" &&
+ git init repo &&
+ test_must_fail git -C repo refs migrate 2>err &&
+ cat >expect <<-EOF &&
+ usage: missing --ref-format=<format>
+ EOF
+ test_cmp expect err
+'
+
+test_expect_success "unknown ref storage format" '
+ test_when_finished "rm -rf repo" &&
+ git init repo &&
+ test_must_fail git -C repo refs migrate \
+ --ref-format=unknown 2>err &&
+ cat >expect <<-EOF &&
+ error: unknown ref storage format ${SQ}unknown${SQ}
+ EOF
+ test_cmp expect err
+'
+
+ref_formats="files reftable"
+for from_format in $ref_formats
+do
+ for to_format in $ref_formats
+ do
+ if test "$from_format" = "$to_format"
+ then
+ continue
+ fi
+
+ test_expect_success "$from_format: migration to same format fails" '
+ test_when_finished "rm -rf repo" &&
+ git init --ref-format=$from_format repo &&
+ test_must_fail git -C repo refs migrate \
+ --ref-format=$from_format 2>err &&
+ cat >expect <<-EOF &&
+ error: repository already uses ${SQ}$from_format${SQ} format
+ EOF
+ test_cmp expect err
+ '
+
+ test_expect_success "$from_format -> $to_format: migration with reflog fails" '
+ test_when_finished "rm -rf repo" &&
+ git init --ref-format=$from_format repo &&
+ test_config -C repo core.logAllRefUpdates true &&
+ test_commit -C repo logged &&
+ test_must_fail git -C repo refs migrate \
+ --ref-format=$to_format 2>err &&
+ cat >expect <<-EOF &&
+ error: migrating reflogs is not supported yet
+ EOF
+ test_cmp expect err
+ '
+
+ test_expect_success "$from_format -> $to_format: migration with worktree fails" '
+ test_when_finished "rm -rf repo" &&
+ git init --ref-format=$from_format repo &&
+ git -C repo worktree add wt &&
+ test_must_fail git -C repo refs migrate \
+ --ref-format=$to_format 2>err &&
+ cat >expect <<-EOF &&
+ error: migrating repositories with worktrees is not supported yet
+ EOF
+ test_cmp expect err
+ '
+
+ test_expect_success "$from_format -> $to_format: unborn HEAD" '
+ test_when_finished "rm -rf repo" &&
+ git init --ref-format=$from_format repo &&
+ test_migration repo "$to_format"
+ '
+
+ test_expect_success "$from_format -> $to_format: single ref" '
+ test_when_finished "rm -rf repo" &&
+ git init --ref-format=$from_format repo &&
+ test_commit -C repo initial &&
+ test_migration repo "$to_format"
+ '
+
+ test_expect_success "$from_format -> $to_format: bare repository" '
+ test_when_finished "rm -rf repo repo.git" &&
+ git init --ref-format=$from_format repo &&
+ test_commit -C repo initial &&
+ git clone --ref-format=$from_format --mirror repo repo.git &&
+ test_migration repo.git "$to_format"
+ '
+
+ test_expect_success "$from_format -> $to_format: dangling symref" '
+ test_when_finished "rm -rf repo" &&
+ git init --ref-format=$from_format repo &&
+ test_commit -C repo initial &&
+ git -C repo symbolic-ref BROKEN_HEAD refs/heads/nonexistent &&
+ test_migration repo "$to_format" &&
+ echo refs/heads/nonexistent >expect &&
+ git -C repo symbolic-ref BROKEN_HEAD >actual &&
+ test_cmp expect actual
+ '
+
+ test_expect_success "$from_format -> $to_format: broken ref" '
+ test_when_finished "rm -rf repo" &&
+ git init --ref-format=$from_format repo &&
+ test_commit -C repo initial &&
+ test-tool -C repo ref-store main update-ref "" refs/heads/broken \
+ "$(test_oid 001)" "$ZERO_OID" REF_SKIP_CREATE_REFLOG,REF_SKIP_OID_VERIFICATION &&
+ test_migration repo "$to_format" &&
+ test_oid 001 >expect &&
+ git -C repo rev-parse refs/heads/broken >actual &&
+ test_cmp expect actual
+ '
+
+ test_expect_success "$from_format -> $to_format: pseudo-refs" '
+ test_when_finished "rm -rf repo" &&
+ git init --ref-format=$from_format repo &&
+ test_commit -C repo initial &&
+ git -C repo update-ref FOO_HEAD HEAD &&
+ test_migration repo "$to_format"
+ '
+
+ test_expect_success "$from_format -> $to_format: special refs are left alone" '
+ test_when_finished "rm -rf repo" &&
+ git init --ref-format=$from_format repo &&
+ test_commit -C repo initial &&
+ git -C repo rev-parse HEAD >repo/.git/MERGE_HEAD &&
+ git -C repo rev-parse MERGE_HEAD &&
+ test_migration repo "$to_format" &&
+ test_path_is_file repo/.git/MERGE_HEAD
+ '
+
+ test_expect_success "$from_format -> $to_format: a bunch of refs" '
+ test_when_finished "rm -rf repo" &&
+ git init --ref-format=$from_format repo &&
+
+ test_commit -C repo initial &&
+ cat >input <<-EOF &&
+ create FOO_HEAD HEAD
+ create refs/heads/branch-1 HEAD
+ create refs/heads/branch-2 HEAD
+ create refs/heads/branch-3 HEAD
+ create refs/heads/branch-4 HEAD
+ create refs/tags/tag-1 HEAD
+ create refs/tags/tag-2 HEAD
+ EOF
+ git -C repo update-ref --stdin <input &&
+ test_migration repo "$to_format"
+ '
+
+ test_expect_success "$from_format -> $to_format: dry-run migration does not modify repository" '
+ test_when_finished "rm -rf repo" &&
+ git init --ref-format=$from_format repo &&
+ test_commit -C repo initial &&
+ git -C repo refs migrate --dry-run \
+ --ref-format=$to_format >output &&
+ grep "Finished dry-run migration of refs" output &&
+ test_path_is_dir repo/.git/ref_migration.* &&
+ echo $from_format >expect &&
+ git -C repo rev-parse --show-ref-format >actual &&
+ test_cmp expect actual
+ '
+ done
+done
+
+test_expect_success 'migrating from files format deletes backend files' '
+ test_when_finished "rm -rf repo" &&
+ git init --ref-format=files repo &&
+ test_commit -C repo first &&
+ git -C repo pack-refs --all &&
+ test_commit -C repo second &&
+ git -C repo update-ref ORIG_HEAD HEAD &&
+ git -C repo rev-parse HEAD >repo/.git/FETCH_HEAD &&
+
+ test_path_is_file repo/.git/HEAD &&
+ test_path_is_file repo/.git/ORIG_HEAD &&
+ test_path_is_file repo/.git/refs/heads/main &&
+ test_path_is_file repo/.git/packed-refs &&
+
+ test_migration repo reftable &&
+
+ echo "ref: refs/heads/.invalid" >expect &&
+ test_cmp expect repo/.git/HEAD &&
+ echo "this repository uses the reftable format" >expect &&
+ test_cmp expect repo/.git/refs/heads &&
+ test_path_is_file repo/.git/FETCH_HEAD &&
+ test_path_is_missing repo/.git/ORIG_HEAD &&
+ test_path_is_missing repo/.git/refs/heads/main &&
+ test_path_is_missing repo/.git/logs &&
+ test_path_is_missing repo/.git/packed-refs
+'
+
+test_expect_success 'migrating from reftable format deletes backend files' '
+ test_when_finished "rm -rf repo" &&
+ git init --ref-format=reftable repo &&
+ test_commit -C repo first &&
+
+ test_path_is_dir repo/.git/reftable &&
+ test_migration repo files &&
+
+ test_path_is_missing repo/.git/reftable &&
+ echo "ref: refs/heads/main" >expect &&
+ test_cmp expect repo/.git/HEAD &&
+ test_path_is_file repo/.git/refs/heads/main
+'
+
+test_done
Introduce a new command that allows the user to migrate a repository between ref storage formats. This new command is implemented as part of a new git-refs(1) executable. This is due to two reasons: - There is no good place to put the migration logic in existing commands. git-maintenance(1) felt unwieldy, and git-pack-refs(1) is not the correct place to put it, either. - I had it in my mind to create a new low-level command for accessing refs for quite a while already. git-refs(1) is that command and can over time grow more functionality relating to refs. This should help discoverability by consolidating low-level access to refs into a single executable. As mentioned in the preceding commit that introduces the ref storage format migration logic, the new `git refs migrate` command still has a bunch of restrictions. These restrictions are documented accordingly. Signed-off-by: Patrick Steinhardt <ps@pks.im> --- .gitignore | 1 + Documentation/git-refs.txt | 62 ++++++++++ Makefile | 1 + builtin.h | 1 + builtin/refs.c | 75 ++++++++++++ git.c | 1 + t/t1460-refs-migrate.sh | 243 +++++++++++++++++++++++++++++++++++++ 7 files changed, 384 insertions(+) create mode 100644 Documentation/git-refs.txt create mode 100644 builtin/refs.c create mode 100755 t/t1460-refs-migrate.sh