@@ -15,24 +15,27 @@ description: |
single, dual, quad or octal wire transmission modes for
read/write access to slaves such as SPI-NOR flash.
-allOf:
- - $ref: spi-controller.yaml#
-
properties:
compatible:
- const: cdns,xspi-nor
+ enum:
+ - cdns,xspi-nor
+ - marvell,cn10-xspi-nor
reg:
items:
- description: address and length of the controller register set
- description: address and length of the Slave DMA data port
- description: address and length of the auxiliary registers
+ - description: address and length of the xfer registers
+ minItems: 3
reg-names:
items:
- const: io
- const: sdma
- const: aux
+ - const: xferbase
+ minItems: 3
interrupts:
maxItems: 1
@@ -42,6 +45,27 @@ required:
- reg
- interrupts
+allOf:
+ - $ref: spi-controller.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - marvell,cn10-xspi-nor
+ then:
+ properties:
+ reg:
+ minItems: 4
+ reg-names:
+ minItems: 4
+ else:
+ properties:
+ reg:
+ maxItems: 3
+ reg-names:
+ maxItems: 3
+
unevaluatedProperties: false
examples:
Add new bindings for the v2 Marvell xSPI overlay: marvell,cn10-xspi-nor compatible string. This new compatible string distinguishes between the original and modified xSPI block. Also add an optional base for the xfer register set with an additional reg field to allocate the xSPI Marvell overlay XFER block. Signed-off-by: Witold Sadowski <wsadowski@marvell.com> --- .../devicetree/bindings/spi/cdns,xspi.yaml | 32 ++++++++++++++++--- 1 file changed, 28 insertions(+), 4 deletions(-)