| Message ID | 20240530-x1e80100-dts-fix-usb-phy-supplies-v1-1-6eb72a546227@linaro.org (mailing list archive) |
|---|---|
| State | Accepted |
| Headers | show |
| Series | arm64: dts: qcom: x1e80100: Fix the supplies to the USB1 SS[0-2] PHYs | expand |
On Thu, May 30, 2024 at 07:35:45PM +0300, Abel Vesa wrote: > The 1.2v HS PHY shared regulator is actually LDO2 from PM8550ve id J. > Also add the missing supplies to QMP PHYs. > > Fixes: d7e03cce0400 ("arm64: dts: qcom: x1e80100-crd: Enable more support") > Signed-off-by: Abel Vesa <abel.vesa@linaro.org> > --- > arch/arm64/boot/dts/qcom/x1e80100-crd.dts | 15 ++++++++++++--- > 1 file changed, 12 insertions(+), 3 deletions(-) > Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
On Thu, May 30, 2024 at 07:35:45PM +0300, Abel Vesa wrote: > The 1.2v HS PHY shared regulator is actually LDO2 from PM8550ve id J. > Also add the missing supplies to QMP PHYs. > > Fixes: d7e03cce0400 ("arm64: dts: qcom: x1e80100-crd: Enable more support") Same here, the CC stable tag is missing: Cc: stable@vger.kernel.org # 6.9 > Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Johan
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts index ed8b80627534..173a88b6b8b8 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts @@ -841,7 +841,7 @@ &uart21 { &usb_1_ss0_hsphy { vdd-supply = <&vreg_l2e_0p8>; - vdda12-supply = <&vreg_l3e_1p2>; + vdda12-supply = <&vreg_l2j_1p2>; phys = <&smb2360_0_eusb2_repeater>; @@ -849,6 +849,9 @@ &usb_1_ss0_hsphy { }; &usb_1_ss0_qmpphy { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l1j_0p8>; + status = "okay"; }; @@ -862,7 +865,7 @@ &usb_1_ss0_dwc3 { &usb_1_ss1_hsphy { vdd-supply = <&vreg_l2e_0p8>; - vdda12-supply = <&vreg_l3e_1p2>; + vdda12-supply = <&vreg_l2j_1p2>; phys = <&smb2360_1_eusb2_repeater>; @@ -870,6 +873,9 @@ &usb_1_ss1_hsphy { }; &usb_1_ss1_qmpphy { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l2d_0p9>; + status = "okay"; }; @@ -883,7 +889,7 @@ &usb_1_ss1_dwc3 { &usb_1_ss2_hsphy { vdd-supply = <&vreg_l2e_0p8>; - vdda12-supply = <&vreg_l3e_1p2>; + vdda12-supply = <&vreg_l2j_1p2>; phys = <&smb2360_2_eusb2_repeater>; @@ -891,6 +897,9 @@ &usb_1_ss2_hsphy { }; &usb_1_ss2_qmpphy { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l2d_0p9>; + status = "okay"; };
The 1.2v HS PHY shared regulator is actually LDO2 from PM8550ve id J. Also add the missing supplies to QMP PHYs. Fixes: d7e03cce0400 ("arm64: dts: qcom: x1e80100-crd: Enable more support") Signed-off-by: Abel Vesa <abel.vesa@linaro.org> --- arch/arm64/boot/dts/qcom/x1e80100-crd.dts | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-)