diff mbox series

[RISU,v2,06/13] risugen: Add sparc64 support

Message ID 20240526193637.459064-7-richard.henderson@linaro.org (mailing list archive)
State New, archived
Headers show
Series ELF and Sparc64 support | expand

Commit Message

Richard Henderson May 26, 2024, 7:36 p.m. UTC
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
 risugen            |  10 +-
 risugen_common.pm  |  50 +++++-
 risugen_sparc64.pm | 385 +++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 443 insertions(+), 2 deletions(-)
 create mode 100644 risugen_sparc64.pm

Comments

Peter Maydell May 30, 2024, 1:23 p.m. UTC | #1
On Sun, 26 May 2024 at 20:38, Richard Henderson
<richard.henderson@linaro.org> wrote:
>
> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
> ---
>  risugen            |  10 +-
>  risugen_common.pm  |  50 +++++-
>  risugen_sparc64.pm | 385 +++++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 443 insertions(+), 2 deletions(-)
>  create mode 100644 risugen_sparc64.pm

I'm not super-enthusiastic about making running risugen now
require an appropriate cross-toolchain for the target.
Since almost all of what risugen is doing is "write
these exact values to the test binary" we don't really
need an assembler to do that.

At any rate, an explanation in the commit message of the
advantages of doing it this way would be helpful in
deciding, I think.

> +sub open_asm($)
> +{
> +    my ($basename) = @_;
> +    my $fname = $basename . ".s";
> +    open(ASM, ">", $fname) or die "can't open $fname: $!";
> +    select ASM;

I think that using Perl select like this is liable to be
rather confusing, because it has "action at a distance"
effects on every other print statement. I would prefer it
if we passed in the filehandle to the print statements
explicitly. (We can use a global if handing the filehandle
around to all the functions is annoying.)

> +}
> +

> +sub gen_one_insn($)

(One day we should see if we can move most of gen_one_insn and
write_test_code to common code, because an awful lot of these
functions is identical across architectures. But that day
doesn't need to be today :-))

-- PMM
Richard Henderson May 30, 2024, 5:44 p.m. UTC | #2
On 5/30/24 06:23, Peter Maydell wrote:
>> +sub open_asm($)
>> +{
>> +    my ($basename) = @_;
>> +    my $fname = $basename . ".s";
>> +    open(ASM, ">", $fname) or die "can't open $fname: $!";
>> +    select ASM;
> 
> I think that using Perl select like this is liable to be
> rather confusing, because it has "action at a distance"
> effects on every other print statement. I would prefer it
> if we passed in the filehandle to the print statements
> explicitly. (We can use a global if handing the filehandle
> around to all the functions is annoying.)

I think I tried that and something didn't work exporting or importing the variable.  My 
perl fu is weak, so I probably made some trivial error.


r~
diff mbox series

Patch

diff --git a/risugen b/risugen
index 2800b8b..830dfd3 100755
--- a/risugen
+++ b/risugen
@@ -310,6 +310,8 @@  Valid options:
                    Useful to test before support for FP is available.
     --sve        : enable sve floating point
     --be         : generate instructions in Big-Endian byte order (ppc64 only).
+    --cross prefix : prefix for the assembler and linker
+    --keep       : do not remove intermediate files
     --help       : print this message
 EOT
 }
@@ -322,6 +324,8 @@  sub main()
     my $fp_enabled = 1;
     my $sve_enabled = 0;
     my $big_endian = 0;
+    my $cross_prefix = "";
+    my $keep = 0;
     my ($infile, $outfile);
 
     GetOptions( "help" => sub { usage(); exit(0); },
@@ -339,6 +343,8 @@  sub main()
                 "be" => sub { $big_endian = 1; },
                 "no-fp" => sub { $fp_enabled = 0; },
                 "sve" => sub { $sve_enabled = 1; },
+                "cross-prefix=s" => \$cross_prefix,
+                "keep" => sub { $keep = 1; },
         ) or return 1;
     # allow "--pattern re,re" and "--pattern re --pattern re"
     @pattern_re = split(/,/,join(',',@pattern_re));
@@ -372,7 +378,9 @@  sub main()
         'keys' => \@insn_keys,
         'arch' => $full_arch[0],
         'subarch' => $full_arch[1] || '',
-        'bigendian' => $big_endian
+        'bigendian' => $big_endian,
+        'cross_prefix' => $cross_prefix,
+        'keep' => $keep,
     );
 
     write_test_code(\%params);
diff --git a/risugen_common.pm b/risugen_common.pm
index 5207c0e..228082f 100644
--- a/risugen_common.pm
+++ b/risugen_common.pm
@@ -26,7 +26,8 @@  BEGIN {
     our @EXPORT = qw(open_bin close_bin set_endian insn32 insn16 $bytecount
                    progress_start progress_update progress_end
                    eval_with_fields is_pow_of_2 sextract ctz
-                   dump_insn_details);
+                   dump_insn_details
+                   open_asm close_asm assemble_and_link);
 }
 
 our $bytecount;
@@ -66,6 +67,53 @@  sub insn16($)
     $bytecount += 2;
 }
 
+sub open_asm($)
+{
+    my ($basename) = @_;
+    my $fname = $basename . ".s";
+    open(ASM, ">", $fname) or die "can't open $fname: $!";
+    select ASM;
+}
+
+sub close_asm
+{
+    close(ASM) or die "can't close asm file: $!";
+    select STDOUT;
+}
+
+sub assemble_and_link($$$@)
+{
+    my ($basename, $cross_prefix, $keep, @asflags) = @_;
+    my $asmfile = $basename . ".s";
+    my $ldfile = $basename . ".ld";
+    my $objfile = $basename . ".o";
+
+    open(LD, ">", $ldfile) or die "can't open $ldfile: $!";
+    print LD '
+        ENTRY(start)
+        PHDRS { text PT_LOAD FILEHDR PHDRS; }
+        SECTIONS {
+            . = SIZEOF_HEADERS;
+            PROVIDE(start = .);
+            .text : { *(.text) } :text
+            .data : { *(.data) } :text
+        }
+    ';
+    close(LD);
+
+    my @as = ($cross_prefix . "as", @asflags, "-o", $objfile, $asmfile);
+    system(@as) == 0 or die "system @as failed: $?";
+
+    my @ld = ($cross_prefix . "ld", "-o", $basename, "-T", $ldfile, $objfile);
+    system(@ld) == 0 or die "system @ld failed: $?";
+
+    if (!$keep) {
+        unlink $asmfile;
+        unlink $ldfile;
+        unlink $objfile;
+    }
+}
+
 # Progress bar implementation
 my $lastprog;
 my $proglen;
diff --git a/risugen_sparc64.pm b/risugen_sparc64.pm
new file mode 100644
index 0000000..c9f2ede
--- /dev/null
+++ b/risugen_sparc64.pm
@@ -0,0 +1,385 @@ 
+#!/usr/bin/perl -w
+###############################################################################
+# Copyright (c) 2024 Linaro Limited
+# All rights reserved. This program and the accompanying materials
+# are made available under the terms of the Eclipse Public License v1.0
+# which accompanies this distribution, and is available at
+# http://www.eclipse.org/legal/epl-v10.html
+###############################################################################
+
+# risugen -- generate a test binary file for use with risu
+# See 'risugen --help' for usage information.
+package risugen_sparc64;
+
+use strict;
+use warnings;
+
+use risugen_common;
+
+require Exporter;
+
+our @ISA    = qw(Exporter);
+our @EXPORT = qw(write_test_code);
+
+my $periodic_reg_random = 1;
+
+# Maximum alignment restriction permitted for a memory op.
+my $MAXALIGN = 64;
+my $MAXBLOCK = 2048;
+my $PARAMREG = 15;         # %o7
+
+my $OP_COMPARE = 0;        # compare registers
+my $OP_TESTEND = 1;        # end of test, stop
+my $OP_SETMEMBLOCK = 2;    # g1 is address of memory block (8192 bytes)
+my $OP_GETMEMBLOCK = 3;    # add the address of memory block to g1
+my $OP_COMPAREMEM = 4;     # compare memory block
+
+my @GREGS = ( "%g0", "%g1", "%g2", "%g3", "%g4", "%g5", "%g6", "%g7",
+              "%o0", "%o1", "%o2", "%o3", "%o4", "%o5", "%o6", "%o7",
+              "%l0", "%l1", "%l2", "%l3", "%l4", "%l5", "%l6", "%l7",
+              "%i0", "%i1", "%i2", "%i3", "%i4", "%i5", "%i6", "%i7" );
+
+sub write_data32($)
+{
+    my ($val) = @_;
+    printf "\t.word\t%#x\n", $val;
+}
+
+sub write_data64($)
+{
+    my ($val) = @_;
+    printf "\t.quad\t%#x\n", $val;
+}
+
+sub write_risuop($)
+{
+    my ($op) = @_;
+    printf "\tilltrap\t%#x\n", 0xdead0 + $op;
+}
+
+sub write_mov_rr($$)
+{
+    my ($rd, $rs) = @_;
+    printf "\tmov\t%s,%s\n", $GREGS[$rs], $GREGS[$rd];
+}
+
+sub write_mov_ri($$)
+{
+    my ($rd, $imm) = @_;
+
+    if (-0x1000 <= $imm < 0x1000) {
+        printf "\tmov\t%d,%s\n", $imm, $GREGS[$rd];
+    } else {
+        my $immhi = $imm & 0xfffff000;
+        my $immlo = $imm & 0x00000fff;
+
+        if ($imm < 0) {
+            $immhi ^= 0xfffff000;
+            $immlo |= -0x1000;
+        }
+        printf "\tsethi\t%%hi(%d),%s\n", $immhi, $GREGS[$rd];
+        if ($immlo != 0) {
+            printf "\txor\t%s,%d,%s\n", $GREGS[$rd], $immlo, $GREGS[$rd];
+        }
+    }
+}
+
+sub write_add_rri($$$)
+{
+    my ($rd, $rs, $imm) = @_;
+    die "bad imm!" if ($imm < -0x1000 || $imm >= 0x1000);
+
+    printf "\txor\t%s,%d,%s\n", $GREGS[$rs], $imm, $GREGS[$rd];
+}
+
+sub write_sub_rrr($$$)
+{
+    my ($rd, $rs1, $rs2) = @_;
+
+    printf "\tsub\t%s,%s,%s\n", $GREGS[$rs1], $GREGS[$rs2], $GREGS[$rd];
+}
+
+sub begin_datablock($$)
+{
+    my ($align, $label) = @_;
+    die "bad align!" if ($align < 4 || $align > 255 || !is_pow_of_2($align));
+
+    printf ".data\n";
+    printf "\t.balign %d\n", $align;
+    printf "%s:\n", $label;
+}
+
+sub end_datablock()
+{
+    printf ".text\n"
+}
+
+sub write_ref_datablock($$$$)
+{
+    my ($rd, $offset, $scratch, $label) = @_;
+
+    printf "\trd\t%%pc,%s\n", $GREGS[$rd];
+    printf "\tsethi\t%%pc22(%s+%d),%s\n",
+           $label, $offset + 4, $GREGS[$scratch];
+    printf "\tor\t%s,%%pc10(%s+%d),%s\n",
+           $GREGS[$scratch], $label, $offset + 8, $GREGS[$scratch];
+    printf "\tadd\t%s,%s,%s\n", $GREGS[$scratch], $GREGS[$rd], $GREGS[$rd];
+}
+
+sub write_random_register_data($$)
+{
+    my ($fp_enabled, $fsr) = @_;
+    my $size = 32 * 8;
+
+    if ($fp_enabled) {
+        # random data for 32 double-precision regs plus %gsr
+        $size += $fp_enabled ? 33 * 8 : 0;
+    }
+
+    begin_datablock(8, "1");
+    for (my $i = 0; $i < $size; $i += 4) {
+        write_data32(rand(0xffffffff));
+    }
+    if ($fp_enabled) {
+        # %fsr gets constant data
+        write_data64($fsr);
+    }
+    end_datablock();
+
+    write_ref_datablock(1, 0, 2, "1b");
+
+    # Load floating point / SIMD registers
+    if ($fp_enabled) {
+        for (my $rt = 0; $rt < 64; $rt += 2) {
+            printf "\tldd\t[%s+%d],%%f%d\n", $GREGS[1], 32 * 8 + $rt * 4, $rt;
+        }
+        printf "\tldx\t[%s+%d],%s\n", $GREGS[1], 64 * 8, $GREGS[2];
+        printf "\twr\t%s,0,%%gsr\n", $GREGS[2];
+        printf "\tldx\t[%s+%d],%%fsr\n", $GREGS[1], 65 * 8;
+    }
+
+    # Load Y
+    printf "\tldx\t[%s],%s\n", $GREGS[1], $GREGS[2];
+    printf "\twr\t%s,0,%%y\n", $GREGS[2];
+
+    # Clear flags
+    printf "\twr\t%%g0,0,%%ccr\n";
+
+    # Load general purpose registers
+    for (my $i = 31; $i >= 1; --$i) {
+        if (reg_ok($i)) {
+            printf "\tldx\t[%s+%d],%s\n", $GREGS[1], $i * 8, $GREGS[$i];
+        }
+    }
+
+    write_risuop($OP_COMPARE);
+}
+
+sub write_memblock_setup()
+{
+    begin_datablock($MAXALIGN, "2");
+
+    for (my $i = 0; $i < $MAXBLOCK; $i += 4) {
+        write_data32(rand(0xffffffff));
+    }
+
+    end_datablock();
+    write_ref_datablock($PARAMREG, 0, 1, "2b");
+    write_risuop($OP_SETMEMBLOCK);
+}
+
+# Functions used in memory blocks to handle addressing modes.
+# These all have the same basic API: they get called with parameters
+# corresponding to the interesting fields of the instruction,
+# and should generate code to set up the base register to be
+# valid. They must return the register number of the base register.
+# The last (array) parameter lists the registers which are trashed
+# by the instruction (ie which are the targets of the load).
+# This is used to avoid problems when the base reg is a load target.
+
+# Global used to communicate between align(x) and reg() etc.
+my $alignment_restriction;
+
+sub align($)
+{
+    my ($a) = @_;
+    if (!is_pow_of_2($a) || !(0 < $a <= $MAXALIGN)) {
+        die "bad align() value $a\n";
+    }
+    $alignment_restriction = $a;
+}
+
+sub gen_memblock_offset()
+{
+    # Generate a random offset within the memory block, of the correct
+    # alignment. We require the offset to not be within 16 bytes of either
+    # end, to (more than) allow for the worst case data transfer.
+    return (rand($MAXBLOCK - 32) + 16) & ~($alignment_restriction - 1);
+}
+
+sub reg_ok($)
+{
+    my ($r) = @_;
+
+    # Avoid special registers %g7 (tp), %o6 (sp), %i6 (fp).
+    return $r != 7 && $r != 14 && $r != 30;
+}
+
+sub reg_plus_imm($$@)
+{
+    # Handle reg + immediate addressing mode
+    my ($base, $imm, @trashed) = @_;
+    my $offset = gen_memblock_offset();
+    my $scratch = $base != 1 ? 1 : 2;
+
+    write_ref_datablock($base, $offset - $imm, $scratch, "2b");
+    write_mov_ri($scratch, 0);
+
+    if (grep $_ == $base, @trashed) {
+        return -1;
+    }
+    return $base;
+}
+
+sub reg($@)
+{
+    my ($base, @trashed) = @_;
+    return reg_plus_imm($base, 0, @trashed);
+}
+
+sub reg_plus_reg($$@)
+{
+    # Handle reg + reg addressing mode
+    my ($base, $idx, @trashed) = @_;
+    my $offset = gen_memblock_offset();
+    my $scratch = 1;
+
+    if ($base == $idx) {
+        return -1;
+    }
+
+    while ($base == $scratch || $idx == $scratch) {
+        ++$scratch;
+    }
+
+    write_ref_datablock($base, $offset, $scratch, "2b");
+    write_mov_ri($scratch, 0);
+    write_sub_rrr($base, $base, $idx);
+
+    if (grep $_ == $base, @trashed) {
+        return -1;
+    }
+    return $base;
+}
+
+sub gen_one_insn($)
+{
+    my ($rec) = @_;
+    my $insnname = $rec->{name};
+    my $insnwidth = $rec->{width};
+    my $fixedbits = $rec->{fixedbits};
+    my $fixedbitmask = $rec->{fixedbitmask};
+    my $constraint = $rec->{blocks}{"constraints"};
+    my $memblock = $rec->{blocks}{"memory"};
+
+    # Given an instruction-details array, generate an instruction
+    my $constraintfailures = 0;
+
+    INSN: while(1) {
+        my $insn = int(rand(0xffffffff));
+
+        $insn &= ~$fixedbitmask;
+        $insn |= $fixedbits;
+
+        if (defined $constraint) {
+            # User-specified constraint: evaluate in an environment
+            # with variables set corresponding to the variable fields.
+            my $v = eval_with_fields($insnname, $insn, $rec, "constraints", $constraint);
+            if (!$v) {
+                $constraintfailures++;
+                if ($constraintfailures > 10000) {
+                    print "10000 consecutive constraint failures for $insnname constraints string:\n$constraint\n";
+                    exit (1);
+                }
+                next INSN;
+            }
+        }
+
+        # OK, we got a good one
+        $constraintfailures = 0;
+
+        my $basereg;
+
+        if (defined $memblock) {
+            # This is a load or store. We simply evaluate the block,
+            # which is expected to be a call to a function which emits
+            # the code to set up the base register and returns the
+            # number of the base register.
+            align(16);
+            $basereg = eval_with_fields($insnname, $insn, $rec, "memory", $memblock);
+        }
+
+	write_data32($insn);
+
+        if (defined $memblock) {
+            # Clean up following a memory access instruction:
+            # we need to turn the (possibly written-back) basereg
+            # into an offset from the base of the memory block,
+            # to avoid making register values depend on memory layout.
+            # $basereg -1 means the basereg was a target of a load
+            # (and so it doesn't contain a memory address after the op)
+            if ($basereg != -1) {
+                write_mov_ri($basereg, 0);
+            }
+            write_risuop($OP_COMPAREMEM);
+        }
+        return;
+    }
+}
+
+sub write_test_code($)
+{
+    my ($params) = @_;
+
+    my $fp_enabled = $params->{ 'fp_enabled' };
+    my $fsr = $params->{ 'fpscr' };
+    my $numinsns = $params->{ 'numinsns' };
+    my $outfile = $params->{ 'outfile' };
+
+    my %insn_details = %{ $params->{ 'details' } };
+    my @keys = @{ $params->{ 'keys' } };
+
+    open_asm($outfile);
+
+    # TODO better random number generator?
+    srand(0);
+
+    print STDOUT "Generating code using patterns: @keys...\n";
+    progress_start(78, $numinsns);
+
+    if (grep { defined($insn_details{$_}->{blocks}->{"memory"}) } @keys) {
+        write_memblock_setup();
+    }
+
+    # memblock setup doesn't clean its registers, so this must come afterwards.
+    write_random_register_data($fp_enabled, $fsr);
+
+    for my $i (1..$numinsns) {
+        my $insn_enc = $keys[int rand (@keys)];
+        gen_one_insn($insn_details{$insn_enc});
+        write_risuop($OP_COMPARE);
+        # Rewrite the registers periodically.
+        if ($periodic_reg_random && ($i % 100) == 0) {
+            write_random_register_data($fp_enabled, $fsr);
+        }
+        progress_update($i);
+    }
+    write_risuop($OP_TESTEND);
+    progress_end();
+
+    close_asm();
+    assemble_and_link($outfile, $params->{ 'cross_prefix' },
+                      $params->{ 'keep' }, "-Av9a");
+}
+
+1;