diff mbox series

[v3,4/9] media: platform: microchip: use for_each_endpoint_of_node()

Message ID 87fru0oxyq.wl-kuninori.morimoto.gx@renesas.com (mailing list archive)
State Not Applicable
Headers show
Series use for_each_endpoint_of_node() | expand

Commit Message

Kuninori Morimoto May 30, 2024, 2:06 a.m. UTC 
We already have for_each_endpoint_of_node(), don't use
of_graph_get_next_endpoint() directly. Replace it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 .../microchip/microchip-sama5d2-isc.c         | 21 +++++++------------
 .../microchip/microchip-sama7g5-isc.c         | 21 +++++++------------
 2 files changed, 16 insertions(+), 26 deletions(-)

Comments

Dan Carpenter May 30, 2024, 6:37 a.m. UTC | #1 
On Thu, May 30, 2024 at 02:06:05AM +0000, Kuninori Morimoto wrote:
> diff --git a/drivers/media/platform/microchip/microchip-sama5d2-isc.c b/drivers/media/platform/microchip/microchip-sama5d2-isc.c
> index 5ac149cf3647f..60b6d922d764e 100644
> --- a/drivers/media/platform/microchip/microchip-sama5d2-isc.c
> +++ b/drivers/media/platform/microchip/microchip-sama5d2-isc.c
> @@ -353,33 +353,29 @@ static const u32 isc_sama5d2_gamma_table[][GAMMA_ENTRIES] = {
>  static int isc_parse_dt(struct device *dev, struct isc_device *isc)
>  {
>  	struct device_node *np = dev->of_node;
> -	struct device_node *epn = NULL;
> +	struct device_node *epn;
>  	struct isc_subdev_entity *subdev_entity;
>  	unsigned int flags;
> -	int ret;
>  
>  	INIT_LIST_HEAD(&isc->subdev_entities);
>  
> -	while (1) {
> +	for_each_endpoint_of_node(np, epn) {
>  		struct v4l2_fwnode_endpoint v4l2_epn = { .bus_type = 0 };
> -
> -		epn = of_graph_get_next_endpoint(np, epn);
> -		if (!epn)
> -			return 0;
> +		int ret;
>  
>  		ret = v4l2_fwnode_endpoint_parse(of_fwnode_handle(epn),
>  						 &v4l2_epn);
>  		if (ret) {
> -			ret = -EINVAL;
> +			of_node_put(epn);
>  			dev_err(dev, "Could not parse the endpoint\n");
> -			break;
> +			return -EINVAL;
>  		}
>  
>  		subdev_entity = devm_kzalloc(dev, sizeof(*subdev_entity),
>  					     GFP_KERNEL);
>  		if (!subdev_entity) {
> -			ret = -ENOMEM;
> -			break;
> +			of_node_put(epn);
> +			return -ENOMEM;
>  		}
>  		subdev_entity->epn = epn;

This code is an example of what Laurent was talking about.  We're taking
storing "subdev_entity->epn = epn" but then not incrementing the
refcount.  Perhaps it's not necessary?

The difference between this and _scoped() would be if we stored epn and
then returned.  I feel like that's less common.  We could detect that
sort of thing using static analysis if it turned out to be an issue.

regards,
dan carpenter
Kuninori Morimoto May 30, 2024, 11:52 p.m. UTC | #2 
Hi Dan, Rob, Helge

> > -	while (1) {
> > +	for_each_endpoint_of_node(np, epn) {
> >  		struct v4l2_fwnode_endpoint v4l2_epn = { .bus_type = 0 };
> > -
> > -		epn = of_graph_get_next_endpoint(np, epn);
> > -		if (!epn)
> > -			return 0;
> > +		int ret;
> >  
> >  		ret = v4l2_fwnode_endpoint_parse(of_fwnode_handle(epn),
> >  						 &v4l2_epn);
> >  		if (ret) {
> > -			ret = -EINVAL;
> > +			of_node_put(epn);
> >  			dev_err(dev, "Could not parse the endpoint\n");
> > -			break;
> > +			return -EINVAL;
> >  		}
> >  
> >  		subdev_entity = devm_kzalloc(dev, sizeof(*subdev_entity),
> >  					     GFP_KERNEL);
> >  		if (!subdev_entity) {
> > -			ret = -ENOMEM;
> > -			break;
> > +			of_node_put(epn);
> > +			return -ENOMEM;
> >  		}
> >  		subdev_entity->epn = epn;
> 
> This code is an example of what Laurent was talking about.  We're taking
> storing "subdev_entity->epn = epn" but then not incrementing the
> refcount.  Perhaps it's not necessary?
> 
> The difference between this and _scoped() would be if we stored epn and
> then returned.  I feel like that's less common.  We could detect that
> sort of thing using static analysis if it turned out to be an issue.

Thank you for pointing good sample, Dan.

But I wonder should this patch-set include and use _scoped() macro ?
If above is just a comment, _scoped() macro will be separate patch-set.
If above is pointing the issue, v4 need to have _scoped() macro.

Thank you for your help !!
Best regards
---
Kuninori Morimoto
diff mbox series

Patch

diff --git a/drivers/media/platform/microchip/microchip-sama5d2-isc.c b/drivers/media/platform/microchip/microchip-sama5d2-isc.c
index 5ac149cf3647f..60b6d922d764e 100644
--- a/drivers/media/platform/microchip/microchip-sama5d2-isc.c
+++ b/drivers/media/platform/microchip/microchip-sama5d2-isc.c
@@ -353,33 +353,29 @@  static const u32 isc_sama5d2_gamma_table[][GAMMA_ENTRIES] = {
 static int isc_parse_dt(struct device *dev, struct isc_device *isc)
 {
 	struct device_node *np = dev->of_node;
-	struct device_node *epn = NULL;
+	struct device_node *epn;
 	struct isc_subdev_entity *subdev_entity;
 	unsigned int flags;
-	int ret;
 
 	INIT_LIST_HEAD(&isc->subdev_entities);
 
-	while (1) {
+	for_each_endpoint_of_node(np, epn) {
 		struct v4l2_fwnode_endpoint v4l2_epn = { .bus_type = 0 };
-
-		epn = of_graph_get_next_endpoint(np, epn);
-		if (!epn)
-			return 0;
+		int ret;
 
 		ret = v4l2_fwnode_endpoint_parse(of_fwnode_handle(epn),
 						 &v4l2_epn);
 		if (ret) {
-			ret = -EINVAL;
+			of_node_put(epn);
 			dev_err(dev, "Could not parse the endpoint\n");
-			break;
+			return -EINVAL;
 		}
 
 		subdev_entity = devm_kzalloc(dev, sizeof(*subdev_entity),
 					     GFP_KERNEL);
 		if (!subdev_entity) {
-			ret = -ENOMEM;
-			break;
+			of_node_put(epn);
+			return -ENOMEM;
 		}
 		subdev_entity->epn = epn;
 
@@ -400,9 +396,8 @@  static int isc_parse_dt(struct device *dev, struct isc_device *isc)
 
 		list_add_tail(&subdev_entity->list, &isc->subdev_entities);
 	}
-	of_node_put(epn);
 
-	return ret;
+	return 0;
 }
 
 static int microchip_isc_probe(struct platform_device *pdev)
diff --git a/drivers/media/platform/microchip/microchip-sama7g5-isc.c b/drivers/media/platform/microchip/microchip-sama7g5-isc.c
index 73445f33d26ba..e97abe3e35af0 100644
--- a/drivers/media/platform/microchip/microchip-sama7g5-isc.c
+++ b/drivers/media/platform/microchip/microchip-sama7g5-isc.c
@@ -336,36 +336,32 @@  static const u32 isc_sama7g5_gamma_table[][GAMMA_ENTRIES] = {
 static int xisc_parse_dt(struct device *dev, struct isc_device *isc)
 {
 	struct device_node *np = dev->of_node;
-	struct device_node *epn = NULL;
+	struct device_node *epn;
 	struct isc_subdev_entity *subdev_entity;
 	unsigned int flags;
-	int ret;
 	bool mipi_mode;
 
 	INIT_LIST_HEAD(&isc->subdev_entities);
 
 	mipi_mode = of_property_read_bool(np, "microchip,mipi-mode");
 
-	while (1) {
+	for_each_endpoint_of_node(np, epn) {
 		struct v4l2_fwnode_endpoint v4l2_epn = { .bus_type = 0 };
-
-		epn = of_graph_get_next_endpoint(np, epn);
-		if (!epn)
-			return 0;
+		int ret;
 
 		ret = v4l2_fwnode_endpoint_parse(of_fwnode_handle(epn),
 						 &v4l2_epn);
 		if (ret) {
-			ret = -EINVAL;
+			of_node_put(epn);
 			dev_err(dev, "Could not parse the endpoint\n");
-			break;
+			return -EINVAL;
 		}
 
 		subdev_entity = devm_kzalloc(dev, sizeof(*subdev_entity),
 					     GFP_KERNEL);
 		if (!subdev_entity) {
-			ret = -ENOMEM;
-			break;
+			of_node_put(epn);
+			return -ENOMEM;
 		}
 		subdev_entity->epn = epn;
 
@@ -389,9 +385,8 @@  static int xisc_parse_dt(struct device *dev, struct isc_device *isc)
 
 		list_add_tail(&subdev_entity->list, &isc->subdev_entities);
 	}
-	of_node_put(epn);
 
-	return ret;
+	return 0;
 }
 
 static int microchip_xisc_probe(struct platform_device *pdev)