| Message ID | 20240528-yoga-ec-driver-v4-4-4fa8dfaae7b6@linaro.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | power: supply: Lenovo Yoga C630 EC | expand |
On Tue, 28 May 2024, Dmitry Baryshkov wrote: > On the Lenovo Yoga C630 WOS laptop the EC provides access to the adapter > and battery status. Add the driver to read power supply status on the > laptop. > > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > --- > drivers/power/supply/Kconfig | 9 + > drivers/power/supply/Makefile | 1 + > drivers/power/supply/lenovo_yoga_c630_battery.c | 479 ++++++++++++++++++++++++ > 3 files changed, 489 insertions(+) > > diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig > index 3e31375491d5..55ab8e90747d 100644 > --- a/drivers/power/supply/Kconfig > +++ b/drivers/power/supply/Kconfig > @@ -167,6 +167,15 @@ config BATTERY_LEGO_EV3 > help > Say Y here to enable support for the LEGO MINDSTORMS EV3 battery. > > +config BATTERY_LENOVO_YOGA_C630 > + tristate "Lenovo Yoga C630 battery" > + depends on OF && EC_LENOVO_YOGA_C630 > + help > + This driver enables battery support on the Lenovo Yoga C630 laptop. > + > + To compile the driver as a module, choose M here: the module will be > + called lenovo_yoga_c630_battery. > + > config BATTERY_PMU > tristate "Apple PMU battery" > depends on PPC32 && ADB_PMU > diff --git a/drivers/power/supply/Makefile b/drivers/power/supply/Makefile > index 58b567278034..8ebbdcf92dac 100644 > --- a/drivers/power/supply/Makefile > +++ b/drivers/power/supply/Makefile > @@ -32,6 +32,7 @@ obj-$(CONFIG_BATTERY_DS2782) += ds2782_battery.o > obj-$(CONFIG_BATTERY_GAUGE_LTC2941) += ltc2941-battery-gauge.o > obj-$(CONFIG_BATTERY_GOLDFISH) += goldfish_battery.o > obj-$(CONFIG_BATTERY_LEGO_EV3) += lego_ev3_battery.o > +obj-$(CONFIG_BATTERY_LENOVO_YOGA_C630) += lenovo_yoga_c630_battery.o > obj-$(CONFIG_BATTERY_PMU) += pmu_battery.o > obj-$(CONFIG_BATTERY_QCOM_BATTMGR) += qcom_battmgr.o > obj-$(CONFIG_BATTERY_OLPC) += olpc_battery.o > diff --git a/drivers/power/supply/lenovo_yoga_c630_battery.c b/drivers/power/supply/lenovo_yoga_c630_battery.c > new file mode 100644 > index 000000000000..76152ad38d46 > --- /dev/null > +++ b/drivers/power/supply/lenovo_yoga_c630_battery.c > @@ -0,0 +1,479 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * Copyright (c) 2022-2024, Linaro Ltd > + * Authors: > + * Bjorn Andersson > + * Dmitry Baryshkov > + */ > +#include <linux/auxiliary_bus.h> > +#include <linux/delay.h> > +#include <linux/module.h> > +#include <linux/platform_data/lenovo-yoga-c630.h> > +#include <linux/power_supply.h> > + > +struct yoga_c630_psy { > + struct yoga_c630_ec *ec; > + struct device *dev; > + struct device_node *of_node; > + struct notifier_block nb; > + struct mutex lock; Missing a few includes, please check them here as well. > + struct power_supply *adp_psy; > + struct power_supply *bat_psy; > + > + unsigned long last_status_update; > + > + bool adapter_online; > + > + bool unit_mA; > + > + bool bat_present; > + unsigned int bat_status; > + unsigned int design_capacity; > + unsigned int design_voltage; > + unsigned int full_charge_capacity; > + > + unsigned int capacity_now; > + unsigned int voltage_now; > + > + int current_now; > + int rate_now; > +}; > + > +#define LENOVO_EC_CACHE_TIME (10 * HZ) > + > +#define LENOVO_EC_ADPT_STATUS 0xa3 > +#define LENOVO_EC_ADPT_PRESENT BIT(7) Add include for BIT() > +#define LENOVO_EC_BAT_ATTRIBUTES 0xc0 > +#define LENOVO_EC_BAT_ATTR_UNIT_IS_MA BIT(1) > +#define LENOVO_EC_BAT_STATUS 0xc1 > +#define LENOVO_EC_BAT_REMAIN_CAPACITY 0xc2 > +#define LENOVO_EC_BAT_VOLTAGE 0xc6 > +#define LENOVO_EC_BAT_DESIGN_VOLTAGE 0xc8 > +#define LENOVO_EC_BAT_DESIGN_CAPACITY 0xca > +#define LENOVO_EC_BAT_FULL_CAPACITY 0xcc > +#define LENOVO_EC_BAT_CURRENT 0xd2 > +#define LENOVO_EC_BAT_FULL_FACTORY 0xd6 > +#define LENOVO_EC_BAT_PRESENT 0xda > +#define LENOVO_EC_BAT_FULL_REGISTER 0xdb > +#define LENOVO_EC_BAT_FULL_IS_FACTORY BIT(0) > + > +/* the mutex should already be locked */ > +static int yoga_c630_psy_update_bat_info(struct yoga_c630_psy *ecbat) > +{ > + struct yoga_c630_ec *ec = ecbat->ec; > + int val; > + > + val = yoga_c630_ec_read8(ec, LENOVO_EC_BAT_PRESENT); > + if (val < 0) > + return val; > + ecbat->bat_present = !!(val & BIT(0)); Name the bit with a define. > + if (!ecbat->bat_present) > + return val; > + > + val = yoga_c630_ec_read8(ec, LENOVO_EC_BAT_ATTRIBUTES); > + if (val < 0) > + return val; > + ecbat->unit_mA = val & LENOVO_EC_BAT_ATTR_UNIT_IS_MA; > + > + val = yoga_c630_ec_read16(ec, LENOVO_EC_BAT_DESIGN_CAPACITY); > + if (val < 0) > + return val; > + ecbat->design_capacity = val * 1000; Check linux/units.h if some WATT related one matches to that literal 1000. > + msleep(50); > + > + val = yoga_c630_ec_read16(ec, LENOVO_EC_BAT_DESIGN_VOLTAGE); > + if (val < 0) > + return val; > + ecbat->design_voltage = val; > + > + msleep(50); > + > + val = yoga_c630_ec_read8(ec, LENOVO_EC_BAT_FULL_REGISTER); > + if (val < 0) > + return val; > + if (val & LENOVO_EC_BAT_FULL_IS_FACTORY) > + val = yoga_c630_ec_read16(ec, LENOVO_EC_BAT_FULL_FACTORY); > + else > + val = yoga_c630_ec_read16(ec, LENOVO_EC_BAT_FULL_CAPACITY); You could consider doing this instead of branching: val = yoga_c630_ec_read16(ec, val & LENOVO_EC_BAT_FULL_IS_FACTORY ? LENOVO_EC_BAT_FULL_FACTORY : LENOVO_EC_BAT_FULL_CAPACITY); > + if (val < 0) > + return val; > + > + ecbat->full_charge_capacity = val * 1000; Something from linux/units.h ? > + if (!ecbat->unit_mA) { > + ecbat->design_capacity *= 10; > + ecbat->full_charge_capacity *= 10; > + } > + > + return 0; > +} > + > +/* the mutex should already be locked */ > +static int yoga_c630_psy_maybe_update_bat_status(struct yoga_c630_psy *ecbat) > +{ > + struct yoga_c630_ec *ec = ecbat->ec; > + int current_mA; > + int val; > + > + if (time_before(jiffies, ecbat->last_status_update + LENOVO_EC_CACHE_TIME)) > + return 0; > + > + val = yoga_c630_ec_read8(ec, LENOVO_EC_BAT_STATUS); > + if (val < 0) > + return val; > + ecbat->bat_status = val; > + > + msleep(50); > + > + val = yoga_c630_ec_read16(ec, LENOVO_EC_BAT_REMAIN_CAPACITY); > + if (val < 0) > + return val; > + ecbat->capacity_now = val * 1000; units.h ? > + msleep(50); > + > + val = yoga_c630_ec_read16(ec, LENOVO_EC_BAT_VOLTAGE); > + if (val < 0) > + return val; > + ecbat->voltage_now = val * 1000; Ditto. > + msleep(50); > + > + val = yoga_c630_ec_read16(ec, LENOVO_EC_BAT_CURRENT); > + if (val < 0) > + return val; > + current_mA = sign_extend32(val, 15); > + ecbat->current_now = current_mA * 1000; > + ecbat->rate_now = current_mA * (ecbat->voltage_now / 1000); Ditto. > + msleep(50); > + > + if (!ecbat->unit_mA) > + ecbat->capacity_now *= 10; > + > + ecbat->last_status_update = jiffies; Add jiffies.h > + return 0; > +} > + > +static int yoga_c630_psy_update_adapter_status(struct yoga_c630_psy *ecbat) > +{ > + struct yoga_c630_ec *ec = ecbat->ec; > + int val; > + > + mutex_lock(&ecbat->lock); This kind of functions coul use guard to take the mutex so unlock will be handled for you by the cleanup automation. > + val = yoga_c630_ec_read8(ec, LENOVO_EC_ADPT_STATUS); > + if (val > 0) > + ecbat->adapter_online = FIELD_GET(LENOVO_EC_ADPT_PRESENT, val); > + > + mutex_unlock(&ecbat->lock); > + > + return val; > +} > + > +static bool yoga_c630_psy_is_charged(struct yoga_c630_psy *ecbat) > +{ > + if (ecbat->bat_status != 0) > + return false; > + > + if (ecbat->full_charge_capacity <= ecbat->capacity_now) > + return true; > + > + if (ecbat->design_capacity <= ecbat->capacity_now) > + return true; > + > + return false; > +} > + > +static int yoga_c630_psy_bat_get_property(struct power_supply *psy, > + enum power_supply_property psp, > + union power_supply_propval *val) > +{ > + struct yoga_c630_psy *ecbat = power_supply_get_drvdata(psy); > + int rc = 0; > + > + if (!ecbat->bat_present && > + psp != POWER_SUPPLY_PROP_PRESENT) Fits to one line. > + return -ENODEV; > + > + mutex_lock(&ecbat->lock); > + rc = yoga_c630_psy_maybe_update_bat_status(ecbat); > + mutex_unlock(&ecbat->lock); > + > + if (rc) Remove empty line in between since this is the error handling. > + return rc; > + > + switch (psp) { > + case POWER_SUPPLY_PROP_STATUS: > + if (ecbat->bat_status & BIT(0)) Name bits with defines. > + val->intval = POWER_SUPPLY_STATUS_DISCHARGING; > + else if (ecbat->bat_status & BIT(1)) Ditto. > + val->intval = POWER_SUPPLY_STATUS_CHARGING; > + else if (yoga_c630_psy_is_charged(ecbat)) > + val->intval = POWER_SUPPLY_STATUS_FULL; > + else > + val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING; > + break; > + case POWER_SUPPLY_PROP_PRESENT: > + val->intval = ecbat->bat_present; > + break; > + case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN: > + val->intval = ecbat->design_voltage; > + break; > + case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN: > + case POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN: > + val->intval = ecbat->design_capacity; > + break; > + case POWER_SUPPLY_PROP_CHARGE_FULL: > + case POWER_SUPPLY_PROP_ENERGY_FULL: > + val->intval = ecbat->full_charge_capacity; > + break; > + case POWER_SUPPLY_PROP_CHARGE_NOW: > + case POWER_SUPPLY_PROP_ENERGY_NOW: > + val->intval = ecbat->capacity_now; > + break; > + case POWER_SUPPLY_PROP_CURRENT_NOW: > + val->intval = ecbat->current_now; > + break; > + case POWER_SUPPLY_PROP_POWER_NOW: > + val->intval = ecbat->rate_now; > + break; > + case POWER_SUPPLY_PROP_VOLTAGE_NOW: > + val->intval = ecbat->voltage_now; > + break; > + case POWER_SUPPLY_PROP_TECHNOLOGY: > + val->intval = POWER_SUPPLY_TECHNOLOGY_LION; > + break; > + case POWER_SUPPLY_PROP_MODEL_NAME: > + val->strval = "PABAS0241231"; > + break; > + case POWER_SUPPLY_PROP_MANUFACTURER: > + val->strval = "Compal"; > + break; > + default: > + rc = -EINVAL; > + break; > + } > + > + return rc; > +} > +static int yoga_c630_psy_register_bat_psy(struct yoga_c630_psy *ecbat) > +{ > + struct power_supply_config bat_cfg = {}; > + > + bat_cfg.drv_data = ecbat; > + bat_cfg.of_node = ecbat->of_node; > + if (ecbat->unit_mA) > + ecbat->bat_psy = power_supply_register_no_ws(ecbat->dev, &yoga_c630_psy_bat_psy_desc_mA, &bat_cfg); > + else > + ecbat->bat_psy = power_supply_register_no_ws(ecbat->dev, &yoga_c630_psy_bat_psy_desc_mWh, &bat_cfg); Again, it might be easier to see what's different in here if the relevant parameter just uses ?: instead of full blown if/else. > + if (IS_ERR(ecbat->bat_psy)) { > + dev_err(ecbat->dev, "failed to register battery supply\n"); > + return PTR_ERR(ecbat->bat_psy); > + } > + > + return 0; > +}
On 28/05/2024 21:44, Dmitry Baryshkov wrote: > On the Lenovo Yoga C630 WOS laptop the EC provides access to the adapter > and battery status. Add the driver to read power supply status on the > laptop. > > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > --- > drivers/power/supply/Kconfig | 9 + > drivers/power/supply/Makefile | 1 + > drivers/power/supply/lenovo_yoga_c630_battery.c | 479 ++++++++++++++++++++++++ > 3 files changed, 489 insertions(+) > > diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig > index 3e31375491d5..55ab8e90747d 100644 > --- a/drivers/power/supply/Kconfig > +++ b/drivers/power/supply/Kconfig > @@ -167,6 +167,15 @@ config BATTERY_LEGO_EV3 > help > Say Y here to enable support for the LEGO MINDSTORMS EV3 battery. > > +config BATTERY_LENOVO_YOGA_C630 > + tristate "Lenovo Yoga C630 battery" > + depends on OF && EC_LENOVO_YOGA_C630 > + help > + This driver enables battery support on the Lenovo Yoga C630 laptop. > + > + To compile the driver as a module, choose M here: the module will be > + called lenovo_yoga_c630_battery. > + > config BATTERY_PMU > tristate "Apple PMU battery" > depends on PPC32 && ADB_PMU > diff --git a/drivers/power/supply/Makefile b/drivers/power/supply/Makefile > index 58b567278034..8ebbdcf92dac 100644 > --- a/drivers/power/supply/Makefile > +++ b/drivers/power/supply/Makefile > @@ -32,6 +32,7 @@ obj-$(CONFIG_BATTERY_DS2782) += ds2782_battery.o > obj-$(CONFIG_BATTERY_GAUGE_LTC2941) += ltc2941-battery-gauge.o > obj-$(CONFIG_BATTERY_GOLDFISH) += goldfish_battery.o > obj-$(CONFIG_BATTERY_LEGO_EV3) += lego_ev3_battery.o > +obj-$(CONFIG_BATTERY_LENOVO_YOGA_C630) += lenovo_yoga_c630_battery.o > obj-$(CONFIG_BATTERY_PMU) += pmu_battery.o > obj-$(CONFIG_BATTERY_QCOM_BATTMGR) += qcom_battmgr.o > obj-$(CONFIG_BATTERY_OLPC) += olpc_battery.o > diff --git a/drivers/power/supply/lenovo_yoga_c630_battery.c b/drivers/power/supply/lenovo_yoga_c630_battery.c > new file mode 100644 > index 000000000000..76152ad38d46 > --- /dev/null > +++ b/drivers/power/supply/lenovo_yoga_c630_battery.c > @@ -0,0 +1,479 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * Copyright (c) 2022-2024, Linaro Ltd > + * Authors: > + * Bjorn Andersson > + * Dmitry Baryshkov > + */ > +#include <linux/auxiliary_bus.h> > +#include <linux/delay.h> > +#include <linux/module.h> > +#include <linux/platform_data/lenovo-yoga-c630.h> > +#include <linux/power_supply.h> > + > +struct yoga_c630_psy { > + struct yoga_c630_ec *ec; > + struct device *dev; > + struct device_node *of_node; > + struct notifier_block nb; > + struct mutex lock; Do locks still not require a struct mutex lock; /* this mutex locks this thing */ > + > + struct power_supply *adp_psy; > + struct power_supply *bat_psy; > + > + unsigned long last_status_update; > + > + bool adapter_online; > + > + bool unit_mA; > + > + bool bat_present; > + unsigned int bat_status; > + unsigned int design_capacity; > + unsigned int design_voltage; > + unsigned int full_charge_capacity; > + > + unsigned int capacity_now; > + unsigned int voltage_now; > + > + int current_now; > + int rate_now; > +}; > + > +#define LENOVO_EC_CACHE_TIME (10 * HZ) > + > +#define LENOVO_EC_ADPT_STATUS 0xa3 > +#define LENOVO_EC_ADPT_PRESENT BIT(7) > +#define LENOVO_EC_BAT_ATTRIBUTES 0xc0 > +#define LENOVO_EC_BAT_ATTR_UNIT_IS_MA BIT(1) > +#define LENOVO_EC_BAT_STATUS 0xc1 > +#define LENOVO_EC_BAT_REMAIN_CAPACITY 0xc2 > +#define LENOVO_EC_BAT_VOLTAGE 0xc6 > +#define LENOVO_EC_BAT_DESIGN_VOLTAGE 0xc8 > +#define LENOVO_EC_BAT_DESIGN_CAPACITY 0xca > +#define LENOVO_EC_BAT_FULL_CAPACITY 0xcc > +#define LENOVO_EC_BAT_CURRENT 0xd2 > +#define LENOVO_EC_BAT_FULL_FACTORY 0xd6 > +#define LENOVO_EC_BAT_PRESENT 0xda > +#define LENOVO_EC_BAT_FULL_REGISTER 0xdb > +#define LENOVO_EC_BAT_FULL_IS_FACTORY BIT(0) > + > +/* the mutex should already be locked */ > +static int yoga_c630_psy_update_bat_info(struct yoga_c630_psy *ecbat) > +{ > + struct yoga_c630_ec *ec = ecbat->ec; > + int val; > + > + val = yoga_c630_ec_read8(ec, LENOVO_EC_BAT_PRESENT); > + if (val < 0) > + return val; > + ecbat->bat_present = !!(val & BIT(0)); > + if (!ecbat->bat_present) > + return val; > + > + val = yoga_c630_ec_read8(ec, LENOVO_EC_BAT_ATTRIBUTES); > + if (val < 0) > + return val; > + ecbat->unit_mA = val & LENOVO_EC_BAT_ATTR_UNIT_IS_MA; > + > + val = yoga_c630_ec_read16(ec, LENOVO_EC_BAT_DESIGN_CAPACITY); > + if (val < 0) > + return val; > + ecbat->design_capacity = val * 1000; > + > + msleep(50); What's this for ? Also do you really want to hold a mutex for 50 milliseconds ? > + > + val = yoga_c630_ec_read16(ec, LENOVO_EC_BAT_DESIGN_VOLTAGE); > + if (val < 0) > + return val; > + ecbat->design_voltage = val; > + > + msleep(50); And again ? I guess it doesn't really matter how long you hold your mutex but, some description of the delay in the code would be nice from a reader's perspective. Same comment for the rest of the msleeps(); > + > + val = yoga_c630_ec_read8(ec, LENOVO_EC_BAT_FULL_REGISTER); > + if (val < 0) > + return val; > + if (val & LENOVO_EC_BAT_FULL_IS_FACTORY) > + val = yoga_c630_ec_read16(ec, LENOVO_EC_BAT_FULL_FACTORY); > + else > + val = yoga_c630_ec_read16(ec, LENOVO_EC_BAT_FULL_CAPACITY); > + if (val < 0) > + return val; > + > + ecbat->full_charge_capacity = val * 1000; > + > + if (!ecbat->unit_mA) { > + ecbat->design_capacity *= 10; > + ecbat->full_charge_capacity *= 10; > + } > + > + return 0; > +} > + > +/* the mutex should already be locked */ > +static int yoga_c630_psy_maybe_update_bat_status(struct yoga_c630_psy *ecbat) > +{ > + struct yoga_c630_ec *ec = ecbat->ec; > + int current_mA; > + int val; > + > + if (time_before(jiffies, ecbat->last_status_update + LENOVO_EC_CACHE_TIME)) > + return 0; > + > + val = yoga_c630_ec_read8(ec, LENOVO_EC_BAT_STATUS); > + if (val < 0) > + return val; > + ecbat->bat_status = val; > + > + msleep(50); > + > + val = yoga_c630_ec_read16(ec, LENOVO_EC_BAT_REMAIN_CAPACITY); > + if (val < 0) > + return val; > + ecbat->capacity_now = val * 1000; > + > + msleep(50); > + > + val = yoga_c630_ec_read16(ec, LENOVO_EC_BAT_VOLTAGE); > + if (val < 0) > + return val; > + ecbat->voltage_now = val * 1000; > + > + msleep(50); > + > + val = yoga_c630_ec_read16(ec, LENOVO_EC_BAT_CURRENT); > + if (val < 0) > + return val; > + current_mA = sign_extend32(val, 15); > + ecbat->current_now = current_mA * 1000; > + ecbat->rate_now = current_mA * (ecbat->voltage_now / 1000); > + > + msleep(50); > + > + if (!ecbat->unit_mA) > + ecbat->capacity_now *= 10; > + > + ecbat->last_status_update = jiffies; > + > + return 0; > +} > + > +static int yoga_c630_psy_update_adapter_status(struct yoga_c630_psy *ecbat) > +{ > + struct yoga_c630_ec *ec = ecbat->ec; > + int val; > + > + mutex_lock(&ecbat->lock); > + > + val = yoga_c630_ec_read8(ec, LENOVO_EC_ADPT_STATUS); > + if (val > 0) > + ecbat->adapter_online = FIELD_GET(LENOVO_EC_ADPT_PRESENT, val); > + > + mutex_unlock(&ecbat->lock); > + > + return val; > +} > + > +static bool yoga_c630_psy_is_charged(struct yoga_c630_psy *ecbat) > +{ > + if (ecbat->bat_status != 0) > + return false; > + > + if (ecbat->full_charge_capacity <= ecbat->capacity_now) > + return true; > + > + if (ecbat->design_capacity <= ecbat->capacity_now) > + return true; > + > + return false; > +} > + > +static int yoga_c630_psy_bat_get_property(struct power_supply *psy, > + enum power_supply_property psp, > + union power_supply_propval *val) > +{ > + struct yoga_c630_psy *ecbat = power_supply_get_drvdata(psy); > + int rc = 0; > + > + if (!ecbat->bat_present && > + psp != POWER_SUPPLY_PROP_PRESENT) > + return -ENODEV; > + > + mutex_lock(&ecbat->lock); > + rc = yoga_c630_psy_maybe_update_bat_status(ecbat); > + mutex_unlock(&ecbat->lock); > + > + if (rc) > + return rc; > + > + switch (psp) { > + case POWER_SUPPLY_PROP_STATUS: > + if (ecbat->bat_status & BIT(0)) > + val->intval = POWER_SUPPLY_STATUS_DISCHARGING; > + else if (ecbat->bat_status & BIT(1)) For preference I'd name these bits. > + val->intval = POWER_SUPPLY_STATUS_CHARGING; > + else if (yoga_c630_psy_is_charged(ecbat)) > + val->intval = POWER_SUPPLY_STATUS_FULL; > + else > + val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING; > + break; > + case POWER_SUPPLY_PROP_PRESENT: > + val->intval = ecbat->bat_present; > + break; > + case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN: > + val->intval = ecbat->design_voltage; > + break; > + case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN: > + case POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN: > + val->intval = ecbat->design_capacity; > + break; > + case POWER_SUPPLY_PROP_CHARGE_FULL: > + case POWER_SUPPLY_PROP_ENERGY_FULL: > + val->intval = ecbat->full_charge_capacity; > + break; > + case POWER_SUPPLY_PROP_CHARGE_NOW: > + case POWER_SUPPLY_PROP_ENERGY_NOW: > + val->intval = ecbat->capacity_now; > + break; > + case POWER_SUPPLY_PROP_CURRENT_NOW: > + val->intval = ecbat->current_now; > + break; > + case POWER_SUPPLY_PROP_POWER_NOW: > + val->intval = ecbat->rate_now; > + break; > + case POWER_SUPPLY_PROP_VOLTAGE_NOW: > + val->intval = ecbat->voltage_now; > + break; > + case POWER_SUPPLY_PROP_TECHNOLOGY: > + val->intval = POWER_SUPPLY_TECHNOLOGY_LION; > + break; > + case POWER_SUPPLY_PROP_MODEL_NAME: > + val->strval = "PABAS0241231"; > + break; > + case POWER_SUPPLY_PROP_MANUFACTURER: > + val->strval = "Compal"; > + break; > + default: > + rc = -EINVAL; > + break; > + } > + > + return rc; > +} > + > +static enum power_supply_property yoga_c630_psy_bat_mA_properties[] = { > + POWER_SUPPLY_PROP_STATUS, > + POWER_SUPPLY_PROP_PRESENT, > + POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, > + POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, > + POWER_SUPPLY_PROP_CHARGE_FULL, > + POWER_SUPPLY_PROP_CHARGE_NOW, > + POWER_SUPPLY_PROP_CURRENT_NOW, > + POWER_SUPPLY_PROP_POWER_NOW, > + POWER_SUPPLY_PROP_VOLTAGE_NOW, > + POWER_SUPPLY_PROP_TECHNOLOGY, > + POWER_SUPPLY_PROP_MODEL_NAME, > + POWER_SUPPLY_PROP_MANUFACTURER, > +}; > + > +static enum power_supply_property yoga_c630_psy_bat_mWh_properties[] = { > + POWER_SUPPLY_PROP_STATUS, > + POWER_SUPPLY_PROP_PRESENT, > + POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, > + POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN, > + POWER_SUPPLY_PROP_ENERGY_FULL, > + POWER_SUPPLY_PROP_ENERGY_NOW, > + POWER_SUPPLY_PROP_CURRENT_NOW, > + POWER_SUPPLY_PROP_POWER_NOW, > + POWER_SUPPLY_PROP_VOLTAGE_NOW, > + POWER_SUPPLY_PROP_TECHNOLOGY, > + POWER_SUPPLY_PROP_MODEL_NAME, > + POWER_SUPPLY_PROP_MANUFACTURER, > +}; > + > +static const struct power_supply_desc yoga_c630_psy_bat_psy_desc_mA = { > + .name = "yoga-c630-battery", > + .type = POWER_SUPPLY_TYPE_BATTERY, > + .properties = yoga_c630_psy_bat_mA_properties, > + .num_properties = ARRAY_SIZE(yoga_c630_psy_bat_mA_properties), > + .get_property = yoga_c630_psy_bat_get_property, > +}; > + > +static const struct power_supply_desc yoga_c630_psy_bat_psy_desc_mWh = { > + .name = "yoga-c630-battery", > + .type = POWER_SUPPLY_TYPE_BATTERY, > + .properties = yoga_c630_psy_bat_mWh_properties, > + .num_properties = ARRAY_SIZE(yoga_c630_psy_bat_mWh_properties), > + .get_property = yoga_c630_psy_bat_get_property, > +}; > + > +static int yoga_c630_psy_adpt_get_property(struct power_supply *psy, > + enum power_supply_property psp, > + union power_supply_propval *val) > +{ > + struct yoga_c630_psy *ecbat = power_supply_get_drvdata(psy); > + int rc = 0; > + > + yoga_c630_psy_update_adapter_status(ecbat); > + > + switch (psp) { > + case POWER_SUPPLY_PROP_ONLINE: > + val->intval = ecbat->adapter_online; > + break; > + default: > + rc = -EINVAL; > + break; > + } > + > + return rc; > +} > + > +static enum power_supply_property yoga_c630_psy_adpt_properties[] = { > + POWER_SUPPLY_PROP_ONLINE, > +}; > + > +static const struct power_supply_desc yoga_c630_psy_adpt_psy_desc = { > + .name = "yoga-c630-adapter", > + .type = POWER_SUPPLY_TYPE_USB_TYPE_C, > + .properties = yoga_c630_psy_adpt_properties, > + .num_properties = ARRAY_SIZE(yoga_c630_psy_adpt_properties), > + .get_property = yoga_c630_psy_adpt_get_property, > +}; > + > +static int yoga_c630_psy_register_bat_psy(struct yoga_c630_psy *ecbat) > +{ > + struct power_supply_config bat_cfg = {}; > + > + bat_cfg.drv_data = ecbat; > + bat_cfg.of_node = ecbat->of_node; > + if (ecbat->unit_mA) > + ecbat->bat_psy = power_supply_register_no_ws(ecbat->dev, &yoga_c630_psy_bat_psy_desc_mA, &bat_cfg); > + else > + ecbat->bat_psy = power_supply_register_no_ws(ecbat->dev, &yoga_c630_psy_bat_psy_desc_mWh, &bat_cfg); These look a bit long, in the other driver in this series you're capping at whatever it is 75 or 80 characters. TBH I think I prefer the longer line above maybe consider elongating the length of the line in the previous driver or curtailing to 80 here. But I think you should have a consistent line lenght in the same series. > + if (IS_ERR(ecbat->bat_psy)) { > + dev_err(ecbat->dev, "failed to register battery supply\n"); > + return PTR_ERR(ecbat->bat_psy); > + } > + > + return 0; > +} > + > +static void yoga_c630_ec_refresh_bat_info(struct yoga_c630_psy *ecbat) > +{ > + bool current_unit; > + > + mutex_lock(&ecbat->lock); > + current_unit = ecbat->unit_mA; > + > + yoga_c630_psy_update_bat_info(ecbat); > + > + if (current_unit != ecbat->unit_mA) { > + power_supply_unregister(ecbat->bat_psy); > + yoga_c630_psy_register_bat_psy(ecbat); > + } > + > + mutex_unlock(&ecbat->lock); > +} > + > +static int yoga_c630_psy_notify(struct notifier_block *nb, > + unsigned long action, void *data) > +{ > + struct yoga_c630_psy *ecbat = container_of(nb, struct yoga_c630_psy, nb); > + > + switch (action) { > + case LENOVO_EC_EVENT_BAT_INFO: > + yoga_c630_ec_refresh_bat_info(ecbat); > + break; > + case LENOVO_EC_EVENT_BAT_ADPT_STATUS: > + power_supply_changed(ecbat->adp_psy); > + fallthrough; > + case LENOVO_EC_EVENT_BAT_STATUS: > + power_supply_changed(ecbat->bat_psy); > + break; > + } > + > + return NOTIFY_OK; > +} > + > +static int yoga_c630_psy_probe(struct auxiliary_device *adev, > + const struct auxiliary_device_id *id) > +{ > + struct yoga_c630_ec *ec = adev->dev.platform_data; > + struct power_supply_config adp_cfg = {}; > + struct device *dev = &adev->dev; > + struct yoga_c630_psy *ecbat; > + int ret; > + > + ecbat = devm_kzalloc(&adev->dev, sizeof(*ecbat), GFP_KERNEL); > + if (!ecbat) > + return -ENOMEM; > + > + ecbat->ec = ec; > + ecbat->dev = dev; > + mutex_init(&ecbat->lock); > + ecbat->of_node = adev->dev.parent->of_node; > + ecbat->nb.notifier_call = yoga_c630_psy_notify; > + > + auxiliary_set_drvdata(adev, ecbat); > + > + adp_cfg.drv_data = ecbat; > + adp_cfg.of_node = ecbat->of_node; > + adp_cfg.supplied_to = (char **)&yoga_c630_psy_bat_psy_desc_mA.name; > + adp_cfg.num_supplicants = 1; > + ecbat->adp_psy = devm_power_supply_register_no_ws(dev, &yoga_c630_psy_adpt_psy_desc, &adp_cfg); > + if (IS_ERR(ecbat->adp_psy)) { > + dev_err(dev, "failed to register AC adapter supply\n"); > + return PTR_ERR(ecbat->adp_psy); > + } > + > + mutex_lock(&ecbat->lock); Do you really need this lock here in your probe() function ? What's the parallel path of execution you are mitigating against here ? > + > + ret = yoga_c630_psy_update_bat_info(ecbat); > + if (ret) > + goto err_unlock; > + > + ret = yoga_c630_psy_register_bat_psy(ecbat); > + if (ret) > + goto err_unlock; > + > + mutex_unlock(&ecbat->lock); > + > + ret = yoga_c630_ec_register_notify(ecbat->ec, &ecbat->nb); > + if (ret) > + goto err_unreg_bat; > + > + return 0; > + > +err_unlock: > + mutex_unlock(&ecbat->lock); > + > +err_unreg_bat: > + power_supply_unregister(ecbat->bat_psy); > + return ret; > +} > + > +static void yoga_c630_psy_remove(struct auxiliary_device *adev) > +{ > + struct yoga_c630_psy *ecbat = auxiliary_get_drvdata(adev); > + > + yoga_c630_ec_unregister_notify(ecbat->ec, &ecbat->nb); > + power_supply_unregister(ecbat->bat_psy); > +} > + > +static const struct auxiliary_device_id yoga_c630_psy_id_table[] = { > + { .name = YOGA_C630_MOD_NAME "." YOGA_C630_DEV_PSY, }, > + {} > +}; > +MODULE_DEVICE_TABLE(auxiliary, yoga_c630_psy_id_table); > + > +static struct auxiliary_driver yoga_c630_psy_driver = { > + .name = YOGA_C630_DEV_PSY, > + .id_table = yoga_c630_psy_id_table, > + .probe = yoga_c630_psy_probe, > + .remove = yoga_c630_psy_remove, > +}; > + > +module_auxiliary_driver(yoga_c630_psy_driver); > + > +MODULE_DESCRIPTION("Lenovo Yoga C630 psy"); > +MODULE_LICENSE("GPL"); >
On Wed, May 29, 2024 at 06:41:36PM +0300, Ilpo Järvinen wrote: > On Tue, 28 May 2024, Dmitry Baryshkov wrote: > > > On the Lenovo Yoga C630 WOS laptop the EC provides access to the adapter > > and battery status. Add the driver to read power supply status on the > > laptop. > > > > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > > --- > > drivers/power/supply/Kconfig | 9 + > > drivers/power/supply/Makefile | 1 + > > drivers/power/supply/lenovo_yoga_c630_battery.c | 479 ++++++++++++++++++++++++ > > 3 files changed, 489 insertions(+) > > > > + > > + val = yoga_c630_ec_read16(ec, LENOVO_EC_BAT_DESIGN_CAPACITY); > > + if (val < 0) > > + return val; > > + ecbat->design_capacity = val * 1000; > > Check linux/units.h if some WATT related one matches to that literal 1000. I'd rather not do that. The capacity might be either in microWatt-hours or in microAmp-hours. Using WATT will be confusing in the second case. > > + msleep(50); > > + > > + val = yoga_c630_ec_read16(ec, LENOVO_EC_BAT_VOLTAGE); > > + if (val < 0) > > + return val; > > + ecbat->voltage_now = val * 1000; > > Ditto. No, Volts and Amps don't have units in <linux/units.h> > > > + msleep(50); > > + > > + val = yoga_c630_ec_read16(ec, LENOVO_EC_BAT_CURRENT); > > + if (val < 0) > > + return val; > > + current_mA = sign_extend32(val, 15); > > + ecbat->current_now = current_mA * 1000; > > + ecbat->rate_now = current_mA * (ecbat->voltage_now / 1000); > > Ditto. The same > > > + msleep(50); > > + > > + if (!ecbat->unit_mA) > > + ecbat->capacity_now *= 10; > > + > > + ecbat->last_status_update = jiffies;
On Wed, May 29, 2024 at 04:51:54PM +0100, Bryan O'Donoghue wrote: > On 28/05/2024 21:44, Dmitry Baryshkov wrote: > > On the Lenovo Yoga C630 WOS laptop the EC provides access to the adapter > > and battery status. Add the driver to read power supply status on the > > laptop. > > > > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > > --- > > drivers/power/supply/Kconfig | 9 + > > drivers/power/supply/Makefile | 1 + > > drivers/power/supply/lenovo_yoga_c630_battery.c | 479 ++++++++++++++++++++++++ > > 3 files changed, 489 insertions(+) > > > > diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig > > index 3e31375491d5..55ab8e90747d 100644 > > --- a/drivers/power/supply/Kconfig > > +++ b/drivers/power/supply/Kconfig > > @@ -167,6 +167,15 @@ config BATTERY_LEGO_EV3 > > help > > Say Y here to enable support for the LEGO MINDSTORMS EV3 battery. > > +config BATTERY_LENOVO_YOGA_C630 > > + tristate "Lenovo Yoga C630 battery" > > + depends on OF && EC_LENOVO_YOGA_C630 > > + help > > + This driver enables battery support on the Lenovo Yoga C630 laptop. > > + > > + To compile the driver as a module, choose M here: the module will be > > + called lenovo_yoga_c630_battery. > > + > > config BATTERY_PMU > > tristate "Apple PMU battery" > > depends on PPC32 && ADB_PMU > > diff --git a/drivers/power/supply/Makefile b/drivers/power/supply/Makefile > > index 58b567278034..8ebbdcf92dac 100644 > > --- a/drivers/power/supply/Makefile > > +++ b/drivers/power/supply/Makefile > > @@ -32,6 +32,7 @@ obj-$(CONFIG_BATTERY_DS2782) += ds2782_battery.o > > obj-$(CONFIG_BATTERY_GAUGE_LTC2941) += ltc2941-battery-gauge.o > > obj-$(CONFIG_BATTERY_GOLDFISH) += goldfish_battery.o > > obj-$(CONFIG_BATTERY_LEGO_EV3) += lego_ev3_battery.o > > +obj-$(CONFIG_BATTERY_LENOVO_YOGA_C630) += lenovo_yoga_c630_battery.o > > obj-$(CONFIG_BATTERY_PMU) += pmu_battery.o > > obj-$(CONFIG_BATTERY_QCOM_BATTMGR) += qcom_battmgr.o > > obj-$(CONFIG_BATTERY_OLPC) += olpc_battery.o > > diff --git a/drivers/power/supply/lenovo_yoga_c630_battery.c b/drivers/power/supply/lenovo_yoga_c630_battery.c > > new file mode 100644 > > index 000000000000..76152ad38d46 > > --- /dev/null > > +++ b/drivers/power/supply/lenovo_yoga_c630_battery.c > > @@ -0,0 +1,479 @@ > > +// SPDX-License-Identifier: GPL-2.0-only > > +/* > > + * Copyright (c) 2022-2024, Linaro Ltd > > + * Authors: > > + * Bjorn Andersson > > + * Dmitry Baryshkov > > + */ > > +#include <linux/auxiliary_bus.h> > > +#include <linux/delay.h> > > +#include <linux/module.h> > > +#include <linux/platform_data/lenovo-yoga-c630.h> > > +#include <linux/power_supply.h> > > + > > +struct yoga_c630_psy { > > + struct yoga_c630_ec *ec; > > + struct device *dev; > > + struct device_node *of_node; > > + struct notifier_block nb; > > + struct mutex lock; > > Do locks still not require a > > struct mutex lock; /* this mutex locks this thing */ Not required, but let me add the doc. > > > + > > + struct power_supply *adp_psy; > > + struct power_supply *bat_psy; > > + > > + unsigned long last_status_update; > > + > > + bool adapter_online; > > + > > + bool unit_mA; > > + > > + bool bat_present; > > + unsigned int bat_status; > > + unsigned int design_capacity; > > + unsigned int design_voltage; > > + unsigned int full_charge_capacity; > > + > > + unsigned int capacity_now; > > + unsigned int voltage_now; > > + > > + int current_now; > > + int rate_now; > > +}; > > + > > +#define LENOVO_EC_CACHE_TIME (10 * HZ) > > + > > +#define LENOVO_EC_ADPT_STATUS 0xa3 > > +#define LENOVO_EC_ADPT_PRESENT BIT(7) > > +#define LENOVO_EC_BAT_ATTRIBUTES 0xc0 > > +#define LENOVO_EC_BAT_ATTR_UNIT_IS_MA BIT(1) > > +#define LENOVO_EC_BAT_STATUS 0xc1 > > +#define LENOVO_EC_BAT_REMAIN_CAPACITY 0xc2 > > +#define LENOVO_EC_BAT_VOLTAGE 0xc6 > > +#define LENOVO_EC_BAT_DESIGN_VOLTAGE 0xc8 > > +#define LENOVO_EC_BAT_DESIGN_CAPACITY 0xca > > +#define LENOVO_EC_BAT_FULL_CAPACITY 0xcc > > +#define LENOVO_EC_BAT_CURRENT 0xd2 > > +#define LENOVO_EC_BAT_FULL_FACTORY 0xd6 > > +#define LENOVO_EC_BAT_PRESENT 0xda > > +#define LENOVO_EC_BAT_FULL_REGISTER 0xdb > > +#define LENOVO_EC_BAT_FULL_IS_FACTORY BIT(0) > > + > > +/* the mutex should already be locked */ > > +static int yoga_c630_psy_update_bat_info(struct yoga_c630_psy *ecbat) > > +{ > > + struct yoga_c630_ec *ec = ecbat->ec; > > + int val; > > + > > + val = yoga_c630_ec_read8(ec, LENOVO_EC_BAT_PRESENT); > > + if (val < 0) > > + return val; > > + ecbat->bat_present = !!(val & BIT(0)); > > + if (!ecbat->bat_present) > > + return val; > > + > > + val = yoga_c630_ec_read8(ec, LENOVO_EC_BAT_ATTRIBUTES); > > + if (val < 0) > > + return val; > > + ecbat->unit_mA = val & LENOVO_EC_BAT_ATTR_UNIT_IS_MA; > > + > > + val = yoga_c630_ec_read16(ec, LENOVO_EC_BAT_DESIGN_CAPACITY); > > + if (val < 0) > > + return val; > > + ecbat->design_capacity = val * 1000; > > + > > + msleep(50); > > What's this for ? Also do you really want to hold a mutex for 50 > milliseconds ? DSDT has these delays after each read, so I can only assume it is required. Sleeping outside of the mutex() would mean that a concurrent thread might break into this delay and query the EC. [skipped] > > +static int yoga_c630_psy_probe(struct auxiliary_device *adev, > > + const struct auxiliary_device_id *id) > > +{ > > + struct yoga_c630_ec *ec = adev->dev.platform_data; > > + struct power_supply_config adp_cfg = {}; > > + struct device *dev = &adev->dev; > > + struct yoga_c630_psy *ecbat; > > + int ret; > > + > > + ecbat = devm_kzalloc(&adev->dev, sizeof(*ecbat), GFP_KERNEL); > > + if (!ecbat) > > + return -ENOMEM; > > + > > + ecbat->ec = ec; > > + ecbat->dev = dev; > > + mutex_init(&ecbat->lock); > > + ecbat->of_node = adev->dev.parent->of_node; > > + ecbat->nb.notifier_call = yoga_c630_psy_notify; > > + > > + auxiliary_set_drvdata(adev, ecbat); > > + > > + adp_cfg.drv_data = ecbat; > > + adp_cfg.of_node = ecbat->of_node; > > + adp_cfg.supplied_to = (char **)&yoga_c630_psy_bat_psy_desc_mA.name; > > + adp_cfg.num_supplicants = 1; > > + ecbat->adp_psy = devm_power_supply_register_no_ws(dev, &yoga_c630_psy_adpt_psy_desc, &adp_cfg); > > + if (IS_ERR(ecbat->adp_psy)) { > > + dev_err(dev, "failed to register AC adapter supply\n"); > > + return PTR_ERR(ecbat->adp_psy); > > + } > > + > > + mutex_lock(&ecbat->lock); > > Do you really need this lock here in your probe() function ? What's the > parallel path of execution you are mitigating against here ? Notifications from the battery driver can already happen at this point. Also once the fist power supply is registered, userspace can potentially access it, triggering EC access and updates of the PSY registration. > > > + > > + ret = yoga_c630_psy_update_bat_info(ecbat); > > + if (ret) > > + goto err_unlock; > > + > > + ret = yoga_c630_psy_register_bat_psy(ecbat); > > + if (ret) > > + goto err_unlock; > > + > > + mutex_unlock(&ecbat->lock); > > +
Hi, Thanks for your patch. I have a few more comments. On Tue, May 28, 2024 at 11:44:49PM +0300, Dmitry Baryshkov wrote: ... > +struct yoga_c630_psy { > + struct yoga_c630_ec *ec; > + struct device *dev; > + struct device_node *of_node; Please use fwnode > +static enum power_supply_property yoga_c630_psy_bat_mA_properties[] = { > + POWER_SUPPLY_PROP_STATUS, > + POWER_SUPPLY_PROP_PRESENT, > + POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, > + POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, > + POWER_SUPPLY_PROP_CHARGE_FULL, > + POWER_SUPPLY_PROP_CHARGE_NOW, > + POWER_SUPPLY_PROP_CURRENT_NOW, > + POWER_SUPPLY_PROP_POWER_NOW, > + POWER_SUPPLY_PROP_VOLTAGE_NOW, > + POWER_SUPPLY_PROP_TECHNOLOGY, > + POWER_SUPPLY_PROP_MODEL_NAME, > + POWER_SUPPLY_PROP_MANUFACTURER, > +}; > + > +static enum power_supply_property yoga_c630_psy_bat_mWh_properties[] = { > + POWER_SUPPLY_PROP_STATUS, > + POWER_SUPPLY_PROP_PRESENT, > + POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, > + POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN, > + POWER_SUPPLY_PROP_ENERGY_FULL, > + POWER_SUPPLY_PROP_ENERGY_NOW, > + POWER_SUPPLY_PROP_CURRENT_NOW, > + POWER_SUPPLY_PROP_POWER_NOW, > + POWER_SUPPLY_PROP_VOLTAGE_NOW, > + POWER_SUPPLY_PROP_TECHNOLOGY, > + POWER_SUPPLY_PROP_MODEL_NAME, > + POWER_SUPPLY_PROP_MANUFACTURER, > +}; Please also add POWER_SUPPLY_PROP_SCOPE = POWER_SUPPLY_SCOPE_SYSTEM > +static enum power_supply_property yoga_c630_psy_adpt_properties[] = { > + POWER_SUPPLY_PROP_ONLINE, > +}; Please also add POWER_SUPPLY_PROP_USB_TYPE = POWER_SUPPLY_USB_TYPE_C > +static const struct power_supply_desc yoga_c630_psy_adpt_psy_desc = { > + .name = "yoga-c630-adapter", > + .type = POWER_SUPPLY_TYPE_USB_TYPE_C, static const enum power_supply_usb_type yoga_c630_psy_adpt_usb_type[] = { POWER_SUPPLY_USB_TYPE_C, }; .type = POWER_SUPPLY_TYPE_USB .usb_types = yoga_c630_psy_adpt_usb_type .num_usb_types = ARRAY_SIZE(yoga_c630_psy_adpt_usb_type), > + .properties = yoga_c630_psy_adpt_properties, > + .num_properties = ARRAY_SIZE(yoga_c630_psy_adpt_properties), > + .get_property = yoga_c630_psy_adpt_get_property, > +}; > + Greetings, -- Sebastian
diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig index 3e31375491d5..55ab8e90747d 100644 --- a/drivers/power/supply/Kconfig +++ b/drivers/power/supply/Kconfig @@ -167,6 +167,15 @@ config BATTERY_LEGO_EV3 help Say Y here to enable support for the LEGO MINDSTORMS EV3 battery. +config BATTERY_LENOVO_YOGA_C630 + tristate "Lenovo Yoga C630 battery" + depends on OF && EC_LENOVO_YOGA_C630 + help + This driver enables battery support on the Lenovo Yoga C630 laptop. + + To compile the driver as a module, choose M here: the module will be + called lenovo_yoga_c630_battery. + config BATTERY_PMU tristate "Apple PMU battery" depends on PPC32 && ADB_PMU diff --git a/drivers/power/supply/Makefile b/drivers/power/supply/Makefile index 58b567278034..8ebbdcf92dac 100644 --- a/drivers/power/supply/Makefile +++ b/drivers/power/supply/Makefile @@ -32,6 +32,7 @@ obj-$(CONFIG_BATTERY_DS2782) += ds2782_battery.o obj-$(CONFIG_BATTERY_GAUGE_LTC2941) += ltc2941-battery-gauge.o obj-$(CONFIG_BATTERY_GOLDFISH) += goldfish_battery.o obj-$(CONFIG_BATTERY_LEGO_EV3) += lego_ev3_battery.o +obj-$(CONFIG_BATTERY_LENOVO_YOGA_C630) += lenovo_yoga_c630_battery.o obj-$(CONFIG_BATTERY_PMU) += pmu_battery.o obj-$(CONFIG_BATTERY_QCOM_BATTMGR) += qcom_battmgr.o obj-$(CONFIG_BATTERY_OLPC) += olpc_battery.o diff --git a/drivers/power/supply/lenovo_yoga_c630_battery.c b/drivers/power/supply/lenovo_yoga_c630_battery.c new file mode 100644 index 000000000000..76152ad38d46 --- /dev/null +++ b/drivers/power/supply/lenovo_yoga_c630_battery.c @@ -0,0 +1,479 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2022-2024, Linaro Ltd + * Authors: + * Bjorn Andersson + * Dmitry Baryshkov + */ +#include <linux/auxiliary_bus.h> +#include <linux/delay.h> +#include <linux/module.h> +#include <linux/platform_data/lenovo-yoga-c630.h> +#include <linux/power_supply.h> + +struct yoga_c630_psy { + struct yoga_c630_ec *ec; + struct device *dev; + struct device_node *of_node; + struct notifier_block nb; + struct mutex lock; + + struct power_supply *adp_psy; + struct power_supply *bat_psy; + + unsigned long last_status_update; + + bool adapter_online; + + bool unit_mA; + + bool bat_present; + unsigned int bat_status; + unsigned int design_capacity; + unsigned int design_voltage; + unsigned int full_charge_capacity; + + unsigned int capacity_now; + unsigned int voltage_now; + + int current_now; + int rate_now; +}; + +#define LENOVO_EC_CACHE_TIME (10 * HZ) + +#define LENOVO_EC_ADPT_STATUS 0xa3 +#define LENOVO_EC_ADPT_PRESENT BIT(7) +#define LENOVO_EC_BAT_ATTRIBUTES 0xc0 +#define LENOVO_EC_BAT_ATTR_UNIT_IS_MA BIT(1) +#define LENOVO_EC_BAT_STATUS 0xc1 +#define LENOVO_EC_BAT_REMAIN_CAPACITY 0xc2 +#define LENOVO_EC_BAT_VOLTAGE 0xc6 +#define LENOVO_EC_BAT_DESIGN_VOLTAGE 0xc8 +#define LENOVO_EC_BAT_DESIGN_CAPACITY 0xca +#define LENOVO_EC_BAT_FULL_CAPACITY 0xcc +#define LENOVO_EC_BAT_CURRENT 0xd2 +#define LENOVO_EC_BAT_FULL_FACTORY 0xd6 +#define LENOVO_EC_BAT_PRESENT 0xda +#define LENOVO_EC_BAT_FULL_REGISTER 0xdb +#define LENOVO_EC_BAT_FULL_IS_FACTORY BIT(0) + +/* the mutex should already be locked */ +static int yoga_c630_psy_update_bat_info(struct yoga_c630_psy *ecbat) +{ + struct yoga_c630_ec *ec = ecbat->ec; + int val; + + val = yoga_c630_ec_read8(ec, LENOVO_EC_BAT_PRESENT); + if (val < 0) + return val; + ecbat->bat_present = !!(val & BIT(0)); + if (!ecbat->bat_present) + return val; + + val = yoga_c630_ec_read8(ec, LENOVO_EC_BAT_ATTRIBUTES); + if (val < 0) + return val; + ecbat->unit_mA = val & LENOVO_EC_BAT_ATTR_UNIT_IS_MA; + + val = yoga_c630_ec_read16(ec, LENOVO_EC_BAT_DESIGN_CAPACITY); + if (val < 0) + return val; + ecbat->design_capacity = val * 1000; + + msleep(50); + + val = yoga_c630_ec_read16(ec, LENOVO_EC_BAT_DESIGN_VOLTAGE); + if (val < 0) + return val; + ecbat->design_voltage = val; + + msleep(50); + + val = yoga_c630_ec_read8(ec, LENOVO_EC_BAT_FULL_REGISTER); + if (val < 0) + return val; + if (val & LENOVO_EC_BAT_FULL_IS_FACTORY) + val = yoga_c630_ec_read16(ec, LENOVO_EC_BAT_FULL_FACTORY); + else + val = yoga_c630_ec_read16(ec, LENOVO_EC_BAT_FULL_CAPACITY); + if (val < 0) + return val; + + ecbat->full_charge_capacity = val * 1000; + + if (!ecbat->unit_mA) { + ecbat->design_capacity *= 10; + ecbat->full_charge_capacity *= 10; + } + + return 0; +} + +/* the mutex should already be locked */ +static int yoga_c630_psy_maybe_update_bat_status(struct yoga_c630_psy *ecbat) +{ + struct yoga_c630_ec *ec = ecbat->ec; + int current_mA; + int val; + + if (time_before(jiffies, ecbat->last_status_update + LENOVO_EC_CACHE_TIME)) + return 0; + + val = yoga_c630_ec_read8(ec, LENOVO_EC_BAT_STATUS); + if (val < 0) + return val; + ecbat->bat_status = val; + + msleep(50); + + val = yoga_c630_ec_read16(ec, LENOVO_EC_BAT_REMAIN_CAPACITY); + if (val < 0) + return val; + ecbat->capacity_now = val * 1000; + + msleep(50); + + val = yoga_c630_ec_read16(ec, LENOVO_EC_BAT_VOLTAGE); + if (val < 0) + return val; + ecbat->voltage_now = val * 1000; + + msleep(50); + + val = yoga_c630_ec_read16(ec, LENOVO_EC_BAT_CURRENT); + if (val < 0) + return val; + current_mA = sign_extend32(val, 15); + ecbat->current_now = current_mA * 1000; + ecbat->rate_now = current_mA * (ecbat->voltage_now / 1000); + + msleep(50); + + if (!ecbat->unit_mA) + ecbat->capacity_now *= 10; + + ecbat->last_status_update = jiffies; + + return 0; +} + +static int yoga_c630_psy_update_adapter_status(struct yoga_c630_psy *ecbat) +{ + struct yoga_c630_ec *ec = ecbat->ec; + int val; + + mutex_lock(&ecbat->lock); + + val = yoga_c630_ec_read8(ec, LENOVO_EC_ADPT_STATUS); + if (val > 0) + ecbat->adapter_online = FIELD_GET(LENOVO_EC_ADPT_PRESENT, val); + + mutex_unlock(&ecbat->lock); + + return val; +} + +static bool yoga_c630_psy_is_charged(struct yoga_c630_psy *ecbat) +{ + if (ecbat->bat_status != 0) + return false; + + if (ecbat->full_charge_capacity <= ecbat->capacity_now) + return true; + + if (ecbat->design_capacity <= ecbat->capacity_now) + return true; + + return false; +} + +static int yoga_c630_psy_bat_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct yoga_c630_psy *ecbat = power_supply_get_drvdata(psy); + int rc = 0; + + if (!ecbat->bat_present && + psp != POWER_SUPPLY_PROP_PRESENT) + return -ENODEV; + + mutex_lock(&ecbat->lock); + rc = yoga_c630_psy_maybe_update_bat_status(ecbat); + mutex_unlock(&ecbat->lock); + + if (rc) + return rc; + + switch (psp) { + case POWER_SUPPLY_PROP_STATUS: + if (ecbat->bat_status & BIT(0)) + val->intval = POWER_SUPPLY_STATUS_DISCHARGING; + else if (ecbat->bat_status & BIT(1)) + val->intval = POWER_SUPPLY_STATUS_CHARGING; + else if (yoga_c630_psy_is_charged(ecbat)) + val->intval = POWER_SUPPLY_STATUS_FULL; + else + val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING; + break; + case POWER_SUPPLY_PROP_PRESENT: + val->intval = ecbat->bat_present; + break; + case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN: + val->intval = ecbat->design_voltage; + break; + case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN: + case POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN: + val->intval = ecbat->design_capacity; + break; + case POWER_SUPPLY_PROP_CHARGE_FULL: + case POWER_SUPPLY_PROP_ENERGY_FULL: + val->intval = ecbat->full_charge_capacity; + break; + case POWER_SUPPLY_PROP_CHARGE_NOW: + case POWER_SUPPLY_PROP_ENERGY_NOW: + val->intval = ecbat->capacity_now; + break; + case POWER_SUPPLY_PROP_CURRENT_NOW: + val->intval = ecbat->current_now; + break; + case POWER_SUPPLY_PROP_POWER_NOW: + val->intval = ecbat->rate_now; + break; + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + val->intval = ecbat->voltage_now; + break; + case POWER_SUPPLY_PROP_TECHNOLOGY: + val->intval = POWER_SUPPLY_TECHNOLOGY_LION; + break; + case POWER_SUPPLY_PROP_MODEL_NAME: + val->strval = "PABAS0241231"; + break; + case POWER_SUPPLY_PROP_MANUFACTURER: + val->strval = "Compal"; + break; + default: + rc = -EINVAL; + break; + } + + return rc; +} + +static enum power_supply_property yoga_c630_psy_bat_mA_properties[] = { + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_PRESENT, + POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, + POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, + POWER_SUPPLY_PROP_CHARGE_FULL, + POWER_SUPPLY_PROP_CHARGE_NOW, + POWER_SUPPLY_PROP_CURRENT_NOW, + POWER_SUPPLY_PROP_POWER_NOW, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_TECHNOLOGY, + POWER_SUPPLY_PROP_MODEL_NAME, + POWER_SUPPLY_PROP_MANUFACTURER, +}; + +static enum power_supply_property yoga_c630_psy_bat_mWh_properties[] = { + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_PRESENT, + POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, + POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN, + POWER_SUPPLY_PROP_ENERGY_FULL, + POWER_SUPPLY_PROP_ENERGY_NOW, + POWER_SUPPLY_PROP_CURRENT_NOW, + POWER_SUPPLY_PROP_POWER_NOW, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_TECHNOLOGY, + POWER_SUPPLY_PROP_MODEL_NAME, + POWER_SUPPLY_PROP_MANUFACTURER, +}; + +static const struct power_supply_desc yoga_c630_psy_bat_psy_desc_mA = { + .name = "yoga-c630-battery", + .type = POWER_SUPPLY_TYPE_BATTERY, + .properties = yoga_c630_psy_bat_mA_properties, + .num_properties = ARRAY_SIZE(yoga_c630_psy_bat_mA_properties), + .get_property = yoga_c630_psy_bat_get_property, +}; + +static const struct power_supply_desc yoga_c630_psy_bat_psy_desc_mWh = { + .name = "yoga-c630-battery", + .type = POWER_SUPPLY_TYPE_BATTERY, + .properties = yoga_c630_psy_bat_mWh_properties, + .num_properties = ARRAY_SIZE(yoga_c630_psy_bat_mWh_properties), + .get_property = yoga_c630_psy_bat_get_property, +}; + +static int yoga_c630_psy_adpt_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct yoga_c630_psy *ecbat = power_supply_get_drvdata(psy); + int rc = 0; + + yoga_c630_psy_update_adapter_status(ecbat); + + switch (psp) { + case POWER_SUPPLY_PROP_ONLINE: + val->intval = ecbat->adapter_online; + break; + default: + rc = -EINVAL; + break; + } + + return rc; +} + +static enum power_supply_property yoga_c630_psy_adpt_properties[] = { + POWER_SUPPLY_PROP_ONLINE, +}; + +static const struct power_supply_desc yoga_c630_psy_adpt_psy_desc = { + .name = "yoga-c630-adapter", + .type = POWER_SUPPLY_TYPE_USB_TYPE_C, + .properties = yoga_c630_psy_adpt_properties, + .num_properties = ARRAY_SIZE(yoga_c630_psy_adpt_properties), + .get_property = yoga_c630_psy_adpt_get_property, +}; + +static int yoga_c630_psy_register_bat_psy(struct yoga_c630_psy *ecbat) +{ + struct power_supply_config bat_cfg = {}; + + bat_cfg.drv_data = ecbat; + bat_cfg.of_node = ecbat->of_node; + if (ecbat->unit_mA) + ecbat->bat_psy = power_supply_register_no_ws(ecbat->dev, &yoga_c630_psy_bat_psy_desc_mA, &bat_cfg); + else + ecbat->bat_psy = power_supply_register_no_ws(ecbat->dev, &yoga_c630_psy_bat_psy_desc_mWh, &bat_cfg); + if (IS_ERR(ecbat->bat_psy)) { + dev_err(ecbat->dev, "failed to register battery supply\n"); + return PTR_ERR(ecbat->bat_psy); + } + + return 0; +} + +static void yoga_c630_ec_refresh_bat_info(struct yoga_c630_psy *ecbat) +{ + bool current_unit; + + mutex_lock(&ecbat->lock); + current_unit = ecbat->unit_mA; + + yoga_c630_psy_update_bat_info(ecbat); + + if (current_unit != ecbat->unit_mA) { + power_supply_unregister(ecbat->bat_psy); + yoga_c630_psy_register_bat_psy(ecbat); + } + + mutex_unlock(&ecbat->lock); +} + +static int yoga_c630_psy_notify(struct notifier_block *nb, + unsigned long action, void *data) +{ + struct yoga_c630_psy *ecbat = container_of(nb, struct yoga_c630_psy, nb); + + switch (action) { + case LENOVO_EC_EVENT_BAT_INFO: + yoga_c630_ec_refresh_bat_info(ecbat); + break; + case LENOVO_EC_EVENT_BAT_ADPT_STATUS: + power_supply_changed(ecbat->adp_psy); + fallthrough; + case LENOVO_EC_EVENT_BAT_STATUS: + power_supply_changed(ecbat->bat_psy); + break; + } + + return NOTIFY_OK; +} + +static int yoga_c630_psy_probe(struct auxiliary_device *adev, + const struct auxiliary_device_id *id) +{ + struct yoga_c630_ec *ec = adev->dev.platform_data; + struct power_supply_config adp_cfg = {}; + struct device *dev = &adev->dev; + struct yoga_c630_psy *ecbat; + int ret; + + ecbat = devm_kzalloc(&adev->dev, sizeof(*ecbat), GFP_KERNEL); + if (!ecbat) + return -ENOMEM; + + ecbat->ec = ec; + ecbat->dev = dev; + mutex_init(&ecbat->lock); + ecbat->of_node = adev->dev.parent->of_node; + ecbat->nb.notifier_call = yoga_c630_psy_notify; + + auxiliary_set_drvdata(adev, ecbat); + + adp_cfg.drv_data = ecbat; + adp_cfg.of_node = ecbat->of_node; + adp_cfg.supplied_to = (char **)&yoga_c630_psy_bat_psy_desc_mA.name; + adp_cfg.num_supplicants = 1; + ecbat->adp_psy = devm_power_supply_register_no_ws(dev, &yoga_c630_psy_adpt_psy_desc, &adp_cfg); + if (IS_ERR(ecbat->adp_psy)) { + dev_err(dev, "failed to register AC adapter supply\n"); + return PTR_ERR(ecbat->adp_psy); + } + + mutex_lock(&ecbat->lock); + + ret = yoga_c630_psy_update_bat_info(ecbat); + if (ret) + goto err_unlock; + + ret = yoga_c630_psy_register_bat_psy(ecbat); + if (ret) + goto err_unlock; + + mutex_unlock(&ecbat->lock); + + ret = yoga_c630_ec_register_notify(ecbat->ec, &ecbat->nb); + if (ret) + goto err_unreg_bat; + + return 0; + +err_unlock: + mutex_unlock(&ecbat->lock); + +err_unreg_bat: + power_supply_unregister(ecbat->bat_psy); + return ret; +} + +static void yoga_c630_psy_remove(struct auxiliary_device *adev) +{ + struct yoga_c630_psy *ecbat = auxiliary_get_drvdata(adev); + + yoga_c630_ec_unregister_notify(ecbat->ec, &ecbat->nb); + power_supply_unregister(ecbat->bat_psy); +} + +static const struct auxiliary_device_id yoga_c630_psy_id_table[] = { + { .name = YOGA_C630_MOD_NAME "." YOGA_C630_DEV_PSY, }, + {} +}; +MODULE_DEVICE_TABLE(auxiliary, yoga_c630_psy_id_table); + +static struct auxiliary_driver yoga_c630_psy_driver = { + .name = YOGA_C630_DEV_PSY, + .id_table = yoga_c630_psy_id_table, + .probe = yoga_c630_psy_probe, + .remove = yoga_c630_psy_remove, +}; + +module_auxiliary_driver(yoga_c630_psy_driver); + +MODULE_DESCRIPTION("Lenovo Yoga C630 psy"); +MODULE_LICENSE("GPL");
On the Lenovo Yoga C630 WOS laptop the EC provides access to the adapter and battery status. Add the driver to read power supply status on the laptop. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- drivers/power/supply/Kconfig | 9 + drivers/power/supply/Makefile | 1 + drivers/power/supply/lenovo_yoga_c630_battery.c | 479 ++++++++++++++++++++++++ 3 files changed, 489 insertions(+)