| Message ID | 20240530082318.40516-5-ryan@testtoast.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add WL-355608-A8 panel | expand |
On 5/30/2024 1:22 AM, Ryan Walklin wrote: > The WL-355608-A8 is a 3.5" 640x480@60Hz RGB LCD display from an unknown > OEM used in a number of handheld gaming devices made by Anbernic. > Limited information is available online however the panel timing values > (below) have been obtained from the vendor BSP. The panel appears to > integrate a NV3052C LCD driver (or clone). Available devices address it > in SPI/RGB mode, with the timing signals generated from the device > SoC (Allwinner H700) and passed through. > > Add a panel definition and display mode to the existing NV3502C driver. > > It was assumed during bringup that the initialisation sequence was the > same as the existing Fascontek FS035VG158 panel, proved working during > experimentation, however subsequent dumping of the init sequence with a > logic analyser confirms one small change to VCOM_ADJ3 from 0x4a to 0x44, > therefore a separate set of registers is also added. > > Timings: > | Active | FP | Sync | BP | Total > -----------|--------|------|------|------|------- > Horizontal | 640 | 64 | 20 | 46 | 770 > Vertical | 480 | 21 | 4 | 15 | 520 > > Signed-off-by: Ryan Walklin <ryan@testtoast.com> > Co-developed-by: Hironori KIKUCHI <kikuchan98@gmail.com> > Signed-off-by: Hironori KIKUCHI <kikuchan98@gmail.com> > Reviewed-by: John Watts <contact@jookia.org> Hi Ryan, Acked-by: Jessica Zhang <quic_jesszhan@quicinc.com> Thanks, Jessica Zhang > > --- > > Changelog v1..v2: > - Update .compatible string to match dt-binding > - Add co-developer sign-off and review tags > --- > .../gpu/drm/panel/panel-newvision-nv3052c.c | 225 ++++++++++++++++++ > 1 file changed, 225 insertions(+) > > diff --git a/drivers/gpu/drm/panel/panel-newvision-nv3052c.c b/drivers/gpu/drm/panel/panel-newvision-nv3052c.c > index 1aab0c9ae52fa..ee0ce271205e3 100644 > --- a/drivers/gpu/drm/panel/panel-newvision-nv3052c.c > +++ b/drivers/gpu/drm/panel/panel-newvision-nv3052c.c > @@ -433,6 +433,202 @@ static const struct nv3052c_reg fs035vg158_panel_regs[] = { > { 0x36, 0x0a }, // bgr = 1, ss = 1, gs = 0 > }; > > + > +static const struct nv3052c_reg wl_355608_a8_panel_regs[] = { > + // EXTC Command set enable, select page 1 > + { 0xff, 0x30 }, { 0xff, 0x52 }, { 0xff, 0x01 }, > + // Mostly unknown registers > + { 0xe3, 0x00 }, > + { 0x40, 0x00 }, > + { 0x03, 0x40 }, > + { 0x04, 0x00 }, > + { 0x05, 0x03 }, > + { 0x08, 0x00 }, > + { 0x09, 0x07 }, > + { 0x0a, 0x01 }, > + { 0x0b, 0x32 }, > + { 0x0c, 0x32 }, > + { 0x0d, 0x0b }, > + { 0x0e, 0x00 }, > + { 0x23, 0xa0 }, > + { 0x24, 0x0c }, > + { 0x25, 0x06 }, > + { 0x26, 0x14 }, > + { 0x27, 0x14 }, > + { 0x38, 0xcc }, // VCOM_ADJ1 > + { 0x39, 0xd7 }, // VCOM_ADJ2 > + { 0x3a, 0x44 }, // VCOM_ADJ3 > + { 0x28, 0x40 }, > + { 0x29, 0x01 }, > + { 0x2a, 0xdf }, > + { 0x49, 0x3c }, > + { 0x91, 0x77 }, // EXTPW_CTRL2 > + { 0x92, 0x77 }, // EXTPW_CTRL3 > + { 0xa0, 0x55 }, > + { 0xa1, 0x50 }, > + { 0xa4, 0x9c }, > + { 0xa7, 0x02 }, > + { 0xa8, 0x01 }, > + { 0xa9, 0x01 }, > + { 0xaa, 0xfc }, > + { 0xab, 0x28 }, > + { 0xac, 0x06 }, > + { 0xad, 0x06 }, > + { 0xae, 0x06 }, > + { 0xaf, 0x03 }, > + { 0xb0, 0x08 }, > + { 0xb1, 0x26 }, > + { 0xb2, 0x28 }, > + { 0xb3, 0x28 }, > + { 0xb4, 0x33 }, > + { 0xb5, 0x08 }, > + { 0xb6, 0x26 }, > + { 0xb7, 0x08 }, > + { 0xb8, 0x26 }, > + { 0xf0, 0x00 }, > + { 0xf6, 0xc0 }, > + // EXTC Command set enable, select page 2 > + { 0xff, 0x30 }, { 0xff, 0x52 }, { 0xff, 0x02 }, > + // Set gray scale voltage to adjust gamma > + { 0xb0, 0x0b }, // PGAMVR0 > + { 0xb1, 0x16 }, // PGAMVR1 > + { 0xb2, 0x17 }, // PGAMVR2 > + { 0xb3, 0x2c }, // PGAMVR3 > + { 0xb4, 0x32 }, // PGAMVR4 > + { 0xb5, 0x3b }, // PGAMVR5 > + { 0xb6, 0x29 }, // PGAMPR0 > + { 0xb7, 0x40 }, // PGAMPR1 > + { 0xb8, 0x0d }, // PGAMPK0 > + { 0xb9, 0x05 }, // PGAMPK1 > + { 0xba, 0x12 }, // PGAMPK2 > + { 0xbb, 0x10 }, // PGAMPK3 > + { 0xbc, 0x12 }, // PGAMPK4 > + { 0xbd, 0x15 }, // PGAMPK5 > + { 0xbe, 0x19 }, // PGAMPK6 > + { 0xbf, 0x0e }, // PGAMPK7 > + { 0xc0, 0x16 }, // PGAMPK8 > + { 0xc1, 0x0a }, // PGAMPK9 > + // Set gray scale voltage to adjust gamma > + { 0xd0, 0x0c }, // NGAMVR0 > + { 0xd1, 0x17 }, // NGAMVR0 > + { 0xd2, 0x14 }, // NGAMVR1 > + { 0xd3, 0x2e }, // NGAMVR2 > + { 0xd4, 0x32 }, // NGAMVR3 > + { 0xd5, 0x3c }, // NGAMVR4 > + { 0xd6, 0x22 }, // NGAMPR0 > + { 0xd7, 0x3d }, // NGAMPR1 > + { 0xd8, 0x0d }, // NGAMPK0 > + { 0xd9, 0x07 }, // NGAMPK1 > + { 0xda, 0x13 }, // NGAMPK2 > + { 0xdb, 0x13 }, // NGAMPK3 > + { 0xdc, 0x11 }, // NGAMPK4 > + { 0xdd, 0x15 }, // NGAMPK5 > + { 0xde, 0x19 }, // NGAMPK6 > + { 0xdf, 0x10 }, // NGAMPK7 > + { 0xe0, 0x17 }, // NGAMPK8 > + { 0xe1, 0x0a }, // NGAMPK9 > + // EXTC Command set enable, select page 3 > + { 0xff, 0x30 }, { 0xff, 0x52 }, { 0xff, 0x03 }, > + // Set various timing settings > + { 0x00, 0x2a }, // GIP_VST_1 > + { 0x01, 0x2a }, // GIP_VST_2 > + { 0x02, 0x2a }, // GIP_VST_3 > + { 0x03, 0x2a }, // GIP_VST_4 > + { 0x04, 0x61 }, // GIP_VST_5 > + { 0x05, 0x80 }, // GIP_VST_6 > + { 0x06, 0xc7 }, // GIP_VST_7 > + { 0x07, 0x01 }, // GIP_VST_8 > + { 0x08, 0x03 }, // GIP_VST_9 > + { 0x09, 0x04 }, // GIP_VST_10 > + { 0x70, 0x22 }, // GIP_ECLK1 > + { 0x71, 0x80 }, // GIP_ECLK2 > + { 0x30, 0x2a }, // GIP_CLK_1 > + { 0x31, 0x2a }, // GIP_CLK_2 > + { 0x32, 0x2a }, // GIP_CLK_3 > + { 0x33, 0x2a }, // GIP_CLK_4 > + { 0x34, 0x61 }, // GIP_CLK_5 > + { 0x35, 0xc5 }, // GIP_CLK_6 > + { 0x36, 0x80 }, // GIP_CLK_7 > + { 0x37, 0x23 }, // GIP_CLK_8 > + { 0x40, 0x03 }, // GIP_CLKA_1 > + { 0x41, 0x04 }, // GIP_CLKA_2 > + { 0x42, 0x05 }, // GIP_CLKA_3 > + { 0x43, 0x06 }, // GIP_CLKA_4 > + { 0x44, 0x11 }, // GIP_CLKA_5 > + { 0x45, 0xe8 }, // GIP_CLKA_6 > + { 0x46, 0xe9 }, // GIP_CLKA_7 > + { 0x47, 0x11 }, // GIP_CLKA_8 > + { 0x48, 0xea }, // GIP_CLKA_9 > + { 0x49, 0xeb }, // GIP_CLKA_10 > + { 0x50, 0x07 }, // GIP_CLKB_1 > + { 0x51, 0x08 }, // GIP_CLKB_2 > + { 0x52, 0x09 }, // GIP_CLKB_3 > + { 0x53, 0x0a }, // GIP_CLKB_4 > + { 0x54, 0x11 }, // GIP_CLKB_5 > + { 0x55, 0xec }, // GIP_CLKB_6 > + { 0x56, 0xed }, // GIP_CLKB_7 > + { 0x57, 0x11 }, // GIP_CLKB_8 > + { 0x58, 0xef }, // GIP_CLKB_9 > + { 0x59, 0xf0 }, // GIP_CLKB_10 > + // Map internal GOA signals to GOA output pad > + { 0xb1, 0x01 }, // PANELD2U2 > + { 0xb4, 0x15 }, // PANELD2U5 > + { 0xb5, 0x16 }, // PANELD2U6 > + { 0xb6, 0x09 }, // PANELD2U7 > + { 0xb7, 0x0f }, // PANELD2U8 > + { 0xb8, 0x0d }, // PANELD2U9 > + { 0xb9, 0x0b }, // PANELD2U10 > + { 0xba, 0x00 }, // PANELD2U11 > + { 0xc7, 0x02 }, // PANELD2U24 > + { 0xca, 0x17 }, // PANELD2U27 > + { 0xcb, 0x18 }, // PANELD2U28 > + { 0xcc, 0x0a }, // PANELD2U29 > + { 0xcd, 0x10 }, // PANELD2U30 > + { 0xce, 0x0e }, // PANELD2U31 > + { 0xcf, 0x0c }, // PANELD2U32 > + { 0xd0, 0x00 }, // PANELD2U33 > + // Map internal GOA signals to GOA output pad > + { 0x81, 0x00 }, // PANELU2D2 > + { 0x84, 0x15 }, // PANELU2D5 > + { 0x85, 0x16 }, // PANELU2D6 > + { 0x86, 0x10 }, // PANELU2D7 > + { 0x87, 0x0a }, // PANELU2D8 > + { 0x88, 0x0c }, // PANELU2D9 > + { 0x89, 0x0e }, // PANELU2D10 > + { 0x8a, 0x02 }, // PANELU2D11 > + { 0x97, 0x00 }, // PANELU2D24 > + { 0x9a, 0x17 }, // PANELU2D27 > + { 0x9b, 0x18 }, // PANELU2D28 > + { 0x9c, 0x0f }, // PANELU2D29 > + { 0x9d, 0x09 }, // PANELU2D30 > + { 0x9e, 0x0b }, // PANELU2D31 > + { 0x9f, 0x0d }, // PANELU2D32 > + { 0xa0, 0x01 }, // PANELU2D33 > + // EXTC Command set enable, select page 2 > + { 0xff, 0x30 }, { 0xff, 0x52 }, { 0xff, 0x02 }, > + // Unknown registers > + { 0x01, 0x01 }, > + { 0x02, 0xda }, > + { 0x03, 0xba }, > + { 0x04, 0xa8 }, > + { 0x05, 0x9a }, > + { 0x06, 0x70 }, > + { 0x07, 0xff }, > + { 0x08, 0x91 }, > + { 0x09, 0x90 }, > + { 0x0a, 0xff }, > + { 0x0b, 0x8f }, > + { 0x0c, 0x60 }, > + { 0x0d, 0x58 }, > + { 0x0e, 0x48 }, > + { 0x0f, 0x38 }, > + { 0x10, 0x2b }, > + // EXTC Command set enable, select page 0 > + { 0xff, 0x30 }, { 0xff, 0x52 }, { 0xff, 0x00 }, > + // Display Access Control > + { 0x36, 0x0a }, // bgr = 1, ss = 1, gs = 0 > +}; > + > static inline struct nv3052c *to_nv3052c(struct drm_panel *panel) > { > return container_of(panel, struct nv3052c, panel); > @@ -670,6 +866,21 @@ static const struct drm_display_mode fs035vg158_modes[] = { > }, > }; > > +static const struct drm_display_mode wl_355608_a8_mode[] = { > + { > + .clock = 24000, > + .hdisplay = 640, > + .hsync_start = 640 + 64, > + .hsync_end = 640 + 64 + 20, > + .htotal = 640 + 64 + 20 + 46, > + .vdisplay = 480, > + .vsync_start = 480 + 21, > + .vsync_end = 480 + 21 + 4, > + .vtotal = 480 + 21 + 4 + 15, > + .flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC, > + }, > +}; > + > static const struct nv3052c_panel_info ltk035c5444t_panel_info = { > .display_modes = ltk035c5444t_modes, > .num_modes = ARRAY_SIZE(ltk035c5444t_modes), > @@ -692,9 +903,21 @@ static const struct nv3052c_panel_info fs035vg158_panel_info = { > .panel_regs_len = ARRAY_SIZE(fs035vg158_panel_regs), > }; > > +static const struct nv3052c_panel_info wl_355608_a8_panel_info = { > + .display_modes = wl_355608_a8_mode, > + .num_modes = ARRAY_SIZE(wl_355608_a8_mode), > + .width_mm = 150, > + .height_mm = 94, > + .bus_format = MEDIA_BUS_FMT_RGB888_1X24, > + .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE, > + .panel_regs = wl_355608_a8_panel_regs, > + .panel_regs_len = ARRAY_SIZE(wl_355608_a8_panel_regs), > +}; > + > static const struct spi_device_id nv3052c_ids[] = { > { "ltk035c5444t", }, > { "fs035vg158", }, > + { "wl-355608-a8", }, > { /* sentinel */ } > }; > MODULE_DEVICE_TABLE(spi, nv3052c_ids); > @@ -702,6 +925,7 @@ MODULE_DEVICE_TABLE(spi, nv3052c_ids); > static const struct of_device_id nv3052c_of_match[] = { > { .compatible = "leadtek,ltk035c5444t", .data = <k035c5444t_panel_info }, > { .compatible = "fascontek,fs035vg158", .data = &fs035vg158_panel_info }, > + { .compatible = "wl-355608-a8", .data = &wl_355608_a8_panel_info }, > { /* sentinel */ } > }; > MODULE_DEVICE_TABLE(of, nv3052c_of_match); > @@ -719,4 +943,5 @@ module_spi_driver(nv3052c_driver); > > MODULE_AUTHOR("Paul Cercueil <paul@crapouillou.net>"); > MODULE_AUTHOR("Christophe Branchereau <cbranchereau@gmail.com>"); > +MODULE_AUTHOR("Ryan Walklin <ryan@testtoast.com"); > MODULE_LICENSE("GPL v2"); > -- > 2.45.1 >
diff --git a/drivers/gpu/drm/panel/panel-newvision-nv3052c.c b/drivers/gpu/drm/panel/panel-newvision-nv3052c.c index 1aab0c9ae52fa..ee0ce271205e3 100644 --- a/drivers/gpu/drm/panel/panel-newvision-nv3052c.c +++ b/drivers/gpu/drm/panel/panel-newvision-nv3052c.c @@ -433,6 +433,202 @@ static const struct nv3052c_reg fs035vg158_panel_regs[] = { { 0x36, 0x0a }, // bgr = 1, ss = 1, gs = 0 }; + +static const struct nv3052c_reg wl_355608_a8_panel_regs[] = { + // EXTC Command set enable, select page 1 + { 0xff, 0x30 }, { 0xff, 0x52 }, { 0xff, 0x01 }, + // Mostly unknown registers + { 0xe3, 0x00 }, + { 0x40, 0x00 }, + { 0x03, 0x40 }, + { 0x04, 0x00 }, + { 0x05, 0x03 }, + { 0x08, 0x00 }, + { 0x09, 0x07 }, + { 0x0a, 0x01 }, + { 0x0b, 0x32 }, + { 0x0c, 0x32 }, + { 0x0d, 0x0b }, + { 0x0e, 0x00 }, + { 0x23, 0xa0 }, + { 0x24, 0x0c }, + { 0x25, 0x06 }, + { 0x26, 0x14 }, + { 0x27, 0x14 }, + { 0x38, 0xcc }, // VCOM_ADJ1 + { 0x39, 0xd7 }, // VCOM_ADJ2 + { 0x3a, 0x44 }, // VCOM_ADJ3 + { 0x28, 0x40 }, + { 0x29, 0x01 }, + { 0x2a, 0xdf }, + { 0x49, 0x3c }, + { 0x91, 0x77 }, // EXTPW_CTRL2 + { 0x92, 0x77 }, // EXTPW_CTRL3 + { 0xa0, 0x55 }, + { 0xa1, 0x50 }, + { 0xa4, 0x9c }, + { 0xa7, 0x02 }, + { 0xa8, 0x01 }, + { 0xa9, 0x01 }, + { 0xaa, 0xfc }, + { 0xab, 0x28 }, + { 0xac, 0x06 }, + { 0xad, 0x06 }, + { 0xae, 0x06 }, + { 0xaf, 0x03 }, + { 0xb0, 0x08 }, + { 0xb1, 0x26 }, + { 0xb2, 0x28 }, + { 0xb3, 0x28 }, + { 0xb4, 0x33 }, + { 0xb5, 0x08 }, + { 0xb6, 0x26 }, + { 0xb7, 0x08 }, + { 0xb8, 0x26 }, + { 0xf0, 0x00 }, + { 0xf6, 0xc0 }, + // EXTC Command set enable, select page 2 + { 0xff, 0x30 }, { 0xff, 0x52 }, { 0xff, 0x02 }, + // Set gray scale voltage to adjust gamma + { 0xb0, 0x0b }, // PGAMVR0 + { 0xb1, 0x16 }, // PGAMVR1 + { 0xb2, 0x17 }, // PGAMVR2 + { 0xb3, 0x2c }, // PGAMVR3 + { 0xb4, 0x32 }, // PGAMVR4 + { 0xb5, 0x3b }, // PGAMVR5 + { 0xb6, 0x29 }, // PGAMPR0 + { 0xb7, 0x40 }, // PGAMPR1 + { 0xb8, 0x0d }, // PGAMPK0 + { 0xb9, 0x05 }, // PGAMPK1 + { 0xba, 0x12 }, // PGAMPK2 + { 0xbb, 0x10 }, // PGAMPK3 + { 0xbc, 0x12 }, // PGAMPK4 + { 0xbd, 0x15 }, // PGAMPK5 + { 0xbe, 0x19 }, // PGAMPK6 + { 0xbf, 0x0e }, // PGAMPK7 + { 0xc0, 0x16 }, // PGAMPK8 + { 0xc1, 0x0a }, // PGAMPK9 + // Set gray scale voltage to adjust gamma + { 0xd0, 0x0c }, // NGAMVR0 + { 0xd1, 0x17 }, // NGAMVR0 + { 0xd2, 0x14 }, // NGAMVR1 + { 0xd3, 0x2e }, // NGAMVR2 + { 0xd4, 0x32 }, // NGAMVR3 + { 0xd5, 0x3c }, // NGAMVR4 + { 0xd6, 0x22 }, // NGAMPR0 + { 0xd7, 0x3d }, // NGAMPR1 + { 0xd8, 0x0d }, // NGAMPK0 + { 0xd9, 0x07 }, // NGAMPK1 + { 0xda, 0x13 }, // NGAMPK2 + { 0xdb, 0x13 }, // NGAMPK3 + { 0xdc, 0x11 }, // NGAMPK4 + { 0xdd, 0x15 }, // NGAMPK5 + { 0xde, 0x19 }, // NGAMPK6 + { 0xdf, 0x10 }, // NGAMPK7 + { 0xe0, 0x17 }, // NGAMPK8 + { 0xe1, 0x0a }, // NGAMPK9 + // EXTC Command set enable, select page 3 + { 0xff, 0x30 }, { 0xff, 0x52 }, { 0xff, 0x03 }, + // Set various timing settings + { 0x00, 0x2a }, // GIP_VST_1 + { 0x01, 0x2a }, // GIP_VST_2 + { 0x02, 0x2a }, // GIP_VST_3 + { 0x03, 0x2a }, // GIP_VST_4 + { 0x04, 0x61 }, // GIP_VST_5 + { 0x05, 0x80 }, // GIP_VST_6 + { 0x06, 0xc7 }, // GIP_VST_7 + { 0x07, 0x01 }, // GIP_VST_8 + { 0x08, 0x03 }, // GIP_VST_9 + { 0x09, 0x04 }, // GIP_VST_10 + { 0x70, 0x22 }, // GIP_ECLK1 + { 0x71, 0x80 }, // GIP_ECLK2 + { 0x30, 0x2a }, // GIP_CLK_1 + { 0x31, 0x2a }, // GIP_CLK_2 + { 0x32, 0x2a }, // GIP_CLK_3 + { 0x33, 0x2a }, // GIP_CLK_4 + { 0x34, 0x61 }, // GIP_CLK_5 + { 0x35, 0xc5 }, // GIP_CLK_6 + { 0x36, 0x80 }, // GIP_CLK_7 + { 0x37, 0x23 }, // GIP_CLK_8 + { 0x40, 0x03 }, // GIP_CLKA_1 + { 0x41, 0x04 }, // GIP_CLKA_2 + { 0x42, 0x05 }, // GIP_CLKA_3 + { 0x43, 0x06 }, // GIP_CLKA_4 + { 0x44, 0x11 }, // GIP_CLKA_5 + { 0x45, 0xe8 }, // GIP_CLKA_6 + { 0x46, 0xe9 }, // GIP_CLKA_7 + { 0x47, 0x11 }, // GIP_CLKA_8 + { 0x48, 0xea }, // GIP_CLKA_9 + { 0x49, 0xeb }, // GIP_CLKA_10 + { 0x50, 0x07 }, // GIP_CLKB_1 + { 0x51, 0x08 }, // GIP_CLKB_2 + { 0x52, 0x09 }, // GIP_CLKB_3 + { 0x53, 0x0a }, // GIP_CLKB_4 + { 0x54, 0x11 }, // GIP_CLKB_5 + { 0x55, 0xec }, // GIP_CLKB_6 + { 0x56, 0xed }, // GIP_CLKB_7 + { 0x57, 0x11 }, // GIP_CLKB_8 + { 0x58, 0xef }, // GIP_CLKB_9 + { 0x59, 0xf0 }, // GIP_CLKB_10 + // Map internal GOA signals to GOA output pad + { 0xb1, 0x01 }, // PANELD2U2 + { 0xb4, 0x15 }, // PANELD2U5 + { 0xb5, 0x16 }, // PANELD2U6 + { 0xb6, 0x09 }, // PANELD2U7 + { 0xb7, 0x0f }, // PANELD2U8 + { 0xb8, 0x0d }, // PANELD2U9 + { 0xb9, 0x0b }, // PANELD2U10 + { 0xba, 0x00 }, // PANELD2U11 + { 0xc7, 0x02 }, // PANELD2U24 + { 0xca, 0x17 }, // PANELD2U27 + { 0xcb, 0x18 }, // PANELD2U28 + { 0xcc, 0x0a }, // PANELD2U29 + { 0xcd, 0x10 }, // PANELD2U30 + { 0xce, 0x0e }, // PANELD2U31 + { 0xcf, 0x0c }, // PANELD2U32 + { 0xd0, 0x00 }, // PANELD2U33 + // Map internal GOA signals to GOA output pad + { 0x81, 0x00 }, // PANELU2D2 + { 0x84, 0x15 }, // PANELU2D5 + { 0x85, 0x16 }, // PANELU2D6 + { 0x86, 0x10 }, // PANELU2D7 + { 0x87, 0x0a }, // PANELU2D8 + { 0x88, 0x0c }, // PANELU2D9 + { 0x89, 0x0e }, // PANELU2D10 + { 0x8a, 0x02 }, // PANELU2D11 + { 0x97, 0x00 }, // PANELU2D24 + { 0x9a, 0x17 }, // PANELU2D27 + { 0x9b, 0x18 }, // PANELU2D28 + { 0x9c, 0x0f }, // PANELU2D29 + { 0x9d, 0x09 }, // PANELU2D30 + { 0x9e, 0x0b }, // PANELU2D31 + { 0x9f, 0x0d }, // PANELU2D32 + { 0xa0, 0x01 }, // PANELU2D33 + // EXTC Command set enable, select page 2 + { 0xff, 0x30 }, { 0xff, 0x52 }, { 0xff, 0x02 }, + // Unknown registers + { 0x01, 0x01 }, + { 0x02, 0xda }, + { 0x03, 0xba }, + { 0x04, 0xa8 }, + { 0x05, 0x9a }, + { 0x06, 0x70 }, + { 0x07, 0xff }, + { 0x08, 0x91 }, + { 0x09, 0x90 }, + { 0x0a, 0xff }, + { 0x0b, 0x8f }, + { 0x0c, 0x60 }, + { 0x0d, 0x58 }, + { 0x0e, 0x48 }, + { 0x0f, 0x38 }, + { 0x10, 0x2b }, + // EXTC Command set enable, select page 0 + { 0xff, 0x30 }, { 0xff, 0x52 }, { 0xff, 0x00 }, + // Display Access Control + { 0x36, 0x0a }, // bgr = 1, ss = 1, gs = 0 +}; + static inline struct nv3052c *to_nv3052c(struct drm_panel *panel) { return container_of(panel, struct nv3052c, panel); @@ -670,6 +866,21 @@ static const struct drm_display_mode fs035vg158_modes[] = { }, }; +static const struct drm_display_mode wl_355608_a8_mode[] = { + { + .clock = 24000, + .hdisplay = 640, + .hsync_start = 640 + 64, + .hsync_end = 640 + 64 + 20, + .htotal = 640 + 64 + 20 + 46, + .vdisplay = 480, + .vsync_start = 480 + 21, + .vsync_end = 480 + 21 + 4, + .vtotal = 480 + 21 + 4 + 15, + .flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC, + }, +}; + static const struct nv3052c_panel_info ltk035c5444t_panel_info = { .display_modes = ltk035c5444t_modes, .num_modes = ARRAY_SIZE(ltk035c5444t_modes), @@ -692,9 +903,21 @@ static const struct nv3052c_panel_info fs035vg158_panel_info = { .panel_regs_len = ARRAY_SIZE(fs035vg158_panel_regs), }; +static const struct nv3052c_panel_info wl_355608_a8_panel_info = { + .display_modes = wl_355608_a8_mode, + .num_modes = ARRAY_SIZE(wl_355608_a8_mode), + .width_mm = 150, + .height_mm = 94, + .bus_format = MEDIA_BUS_FMT_RGB888_1X24, + .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE, + .panel_regs = wl_355608_a8_panel_regs, + .panel_regs_len = ARRAY_SIZE(wl_355608_a8_panel_regs), +}; + static const struct spi_device_id nv3052c_ids[] = { { "ltk035c5444t", }, { "fs035vg158", }, + { "wl-355608-a8", }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(spi, nv3052c_ids); @@ -702,6 +925,7 @@ MODULE_DEVICE_TABLE(spi, nv3052c_ids); static const struct of_device_id nv3052c_of_match[] = { { .compatible = "leadtek,ltk035c5444t", .data = <k035c5444t_panel_info }, { .compatible = "fascontek,fs035vg158", .data = &fs035vg158_panel_info }, + { .compatible = "wl-355608-a8", .data = &wl_355608_a8_panel_info }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, nv3052c_of_match); @@ -719,4 +943,5 @@ module_spi_driver(nv3052c_driver); MODULE_AUTHOR("Paul Cercueil <paul@crapouillou.net>"); MODULE_AUTHOR("Christophe Branchereau <cbranchereau@gmail.com>"); +MODULE_AUTHOR("Ryan Walklin <ryan@testtoast.com"); MODULE_LICENSE("GPL v2");
The WL-355608-A8 is a 3.5" 640x480@60Hz RGB LCD display from an unknown OEM used in a number of handheld gaming devices made by Anbernic. Limited information is available online however the panel timing values (below) have been obtained from the vendor BSP. The panel appears to integrate a NV3052C LCD driver (or clone). Available devices address it in SPI/RGB mode, with the timing signals generated from the device SoC (Allwinner H700) and passed through. Add a panel definition and display mode to the existing NV3502C driver. It was assumed during bringup that the initialisation sequence was the same as the existing Fascontek FS035VG158 panel, proved working during experimentation, however subsequent dumping of the init sequence with a logic analyser confirms one small change to VCOM_ADJ3 from 0x4a to 0x44, therefore a separate set of registers is also added. Timings: | Active | FP | Sync | BP | Total -----------|--------|------|------|------|------- Horizontal | 640 | 64 | 20 | 46 | 770 Vertical | 480 | 21 | 4 | 15 | 520 Signed-off-by: Ryan Walklin <ryan@testtoast.com> Co-developed-by: Hironori KIKUCHI <kikuchan98@gmail.com> Signed-off-by: Hironori KIKUCHI <kikuchan98@gmail.com> Reviewed-by: John Watts <contact@jookia.org> --- Changelog v1..v2: - Update .compatible string to match dt-binding - Add co-developer sign-off and review tags --- .../gpu/drm/panel/panel-newvision-nv3052c.c | 225 ++++++++++++++++++ 1 file changed, 225 insertions(+)