diff mbox series

[v3] nbd: Remove __force casts

Message ID 20240604221531.327131-1-bvanassche@acm.org (mailing list archive)
State New, archived
Headers show
Series [v3] nbd: Remove __force casts | expand

Commit Message

Bart Van Assche June 4, 2024, 10:15 p.m. UTC
From: Christoph Hellwig <hch@lst.de>

Make it again possible for sparse to verify that blk_status_t and Unix
error codes are used in the proper context by making nbd_send_cmd()
return a blk_status_t instead of an integer.

No functionality has been changed.

Signed-off-by: Christoph Hellwig <hch@lst.de>
[ bvanassche: added description and made two small formatting changes ]
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/block/nbd.c | 51 +++++++++++++++++++--------------------------
 1 file changed, 22 insertions(+), 29 deletions(-)

Changes compared to v2: fixed return type in the patch description.

Changes compared to v1: instead of making nbd_send_cmd() return a struct,
  change the nbd_send_cmd() return type into blk_status_t and move the code
  for making a socket dead from the nbd_send_cmd() caller into nbd_send_cmd().

Comments

Chaitanya Kulkarni June 5, 2024, 12:07 a.m. UTC | #1
On 6/4/24 15:15, Bart Van Assche wrote:
> From: Christoph Hellwig <hch@lst.de>
>
> Make it again possible for sparse to verify that blk_status_t and Unix
> error codes are used in the proper context by making nbd_send_cmd()
> return a blk_status_t instead of an integer.
>
> No functionality has been changed.
>
> Signed-off-by: Christoph Hellwig <hch@lst.de>
> [ bvanassche: added description and made two small formatting changes ]
> Signed-off-by: Bart Van Assche <bvanassche@acm.org>
> ---
>


Looks good.

Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>

-ck
Christoph Hellwig June 6, 2024, 5:39 a.m. UTC | #2
On Tue, Jun 04, 2024 at 04:15:31PM -0600, Bart Van Assche wrote:
> From: Christoph Hellwig <hch@lst.de>
> 
> Make it again possible for sparse to verify that blk_status_t and Unix
> error codes are used in the proper context by making nbd_send_cmd()
> return a blk_status_t instead of an integer.
> 
> No functionality has been changed.
> 
> Signed-off-by: Christoph Hellwig <hch@lst.de>
> [ bvanassche: added description and made two small formatting changes ]
> Signed-off-by: Bart Van Assche <bvanassche@acm.org>

I didn't actually add a signoff before, but feel free to keep it.
Jens Axboe June 12, 2024, 8:47 p.m. UTC | #3
On Tue, 04 Jun 2024 16:15:31 -0600, Bart Van Assche wrote:
> Make it again possible for sparse to verify that blk_status_t and Unix
> error codes are used in the proper context by making nbd_send_cmd()
> return a blk_status_t instead of an integer.
> 
> No functionality has been changed.
> 
> 
> [...]

Applied, thanks!

[1/1] nbd: Remove __force casts
      commit: 957df9af723ccc570da835978cf7fe7863632842

Best regards,
diff mbox series

Patch

diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c
index 22a79a62cc4e..b87aa80a46dd 100644
--- a/drivers/block/nbd.c
+++ b/drivers/block/nbd.c
@@ -589,10 +589,11 @@  static inline int was_interrupted(int result)
 }
 
 /*
- * Returns BLK_STS_RESOURCE if the caller should retry after a delay. Returns
- * -EAGAIN if the caller should requeue @cmd. Returns -EIO if sending failed.
+ * Returns BLK_STS_RESOURCE if the caller should retry after a delay.
+ * Returns BLK_STS_IOERR if sending failed.
  */
-static int nbd_send_cmd(struct nbd_device *nbd, struct nbd_cmd *cmd, int index)
+static blk_status_t nbd_send_cmd(struct nbd_device *nbd, struct nbd_cmd *cmd,
+				 int index)
 {
 	struct request *req = blk_mq_rq_from_pdu(cmd);
 	struct nbd_config *config = nbd->config;
@@ -614,13 +615,13 @@  static int nbd_send_cmd(struct nbd_device *nbd, struct nbd_cmd *cmd, int index)
 
 	type = req_to_nbd_cmd_type(req);
 	if (type == U32_MAX)
-		return -EIO;
+		return BLK_STS_IOERR;
 
 	if (rq_data_dir(req) == WRITE &&
 	    (config->flags & NBD_FLAG_READ_ONLY)) {
 		dev_err_ratelimited(disk_to_dev(nbd->disk),
 				    "Write on read-only\n");
-		return -EIO;
+		return BLK_STS_IOERR;
 	}
 
 	if (req->cmd_flags & REQ_FUA)
@@ -674,11 +675,11 @@  static int nbd_send_cmd(struct nbd_device *nbd, struct nbd_cmd *cmd, int index)
 				nsock->sent = sent;
 			}
 			set_bit(NBD_CMD_REQUEUED, &cmd->flags);
-			return (__force int)BLK_STS_RESOURCE;
+			return BLK_STS_RESOURCE;
 		}
 		dev_err_ratelimited(disk_to_dev(nbd->disk),
 			"Send control failed (result %d)\n", result);
-		return -EAGAIN;
+		goto requeue;
 	}
 send_pages:
 	if (type != NBD_CMD_WRITE)
@@ -715,12 +716,12 @@  static int nbd_send_cmd(struct nbd_device *nbd, struct nbd_cmd *cmd, int index)
 					nsock->pending = req;
 					nsock->sent = sent;
 					set_bit(NBD_CMD_REQUEUED, &cmd->flags);
-					return (__force int)BLK_STS_RESOURCE;
+					return BLK_STS_RESOURCE;
 				}
 				dev_err(disk_to_dev(nbd->disk),
 					"Send data failed (result %d)\n",
 					result);
-				return -EAGAIN;
+				goto requeue;
 			}
 			/*
 			 * The completion might already have come in,
@@ -737,7 +738,16 @@  static int nbd_send_cmd(struct nbd_device *nbd, struct nbd_cmd *cmd, int index)
 	trace_nbd_payload_sent(req, handle);
 	nsock->pending = NULL;
 	nsock->sent = 0;
-	return 0;
+	__set_bit(NBD_CMD_INFLIGHT, &cmd->flags);
+	return BLK_STS_OK;
+
+requeue:
+	/* retry on a different socket */
+	dev_err_ratelimited(disk_to_dev(nbd->disk),
+			    "Request send failed, requeueing\n");
+	nbd_mark_nsock_dead(nbd, nsock, 1);
+	nbd_requeue_cmd(cmd);
+	return BLK_STS_OK;
 }
 
 static int nbd_read_reply(struct nbd_device *nbd, struct socket *sock,
@@ -1018,7 +1028,7 @@  static blk_status_t nbd_handle_cmd(struct nbd_cmd *cmd, int index)
 	struct nbd_device *nbd = cmd->nbd;
 	struct nbd_config *config;
 	struct nbd_sock *nsock;
-	int ret;
+	blk_status_t ret;
 
 	lockdep_assert_held(&cmd->lock);
 
@@ -1072,28 +1082,11 @@  static blk_status_t nbd_handle_cmd(struct nbd_cmd *cmd, int index)
 		ret = BLK_STS_OK;
 		goto out;
 	}
-	/*
-	 * Some failures are related to the link going down, so anything that
-	 * returns EAGAIN can be retried on a different socket.
-	 */
 	ret = nbd_send_cmd(nbd, cmd, index);
-	/*
-	 * Access to this flag is protected by cmd->lock, thus it's safe to set
-	 * the flag after nbd_send_cmd() succeed to send request to server.
-	 */
-	if (!ret)
-		__set_bit(NBD_CMD_INFLIGHT, &cmd->flags);
-	else if (ret == -EAGAIN) {
-		dev_err_ratelimited(disk_to_dev(nbd->disk),
-				    "Request send failed, requeueing\n");
-		nbd_mark_nsock_dead(nbd, nsock, 1);
-		nbd_requeue_cmd(cmd);
-		ret = BLK_STS_OK;
-	}
 out:
 	mutex_unlock(&nsock->tx_lock);
 	nbd_config_put(nbd);
-	return ret < 0 ? BLK_STS_IOERR : (__force blk_status_t)ret;
+	return ret;
 }
 
 static blk_status_t nbd_queue_rq(struct blk_mq_hw_ctx *hctx,