Message ID | 20240605095223.2556963-1-danishanwar@ti.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | [net-next,v3] net: ti: icssg-prueth: Add multicast filtering support | expand |
On 05.06.2024 11:52, MD Danish Anwar wrote: > Add multicast filtering support for ICSSG Driver. Multicast addresses will > be updated by __dev_mc_sync() API. icssg_prueth_add_macst () and > icssg_prueth_del_mcast() will be sync and unsync APIs for the driver > respectively. > > To add a mac_address for a port, driver needs to call icssg_fdb_add_del() > and pass the mac_address and BIT(port_id) to the API. The ICSSG firmware > will then configure the rules and allow filtering. > > If a mac_address is added to port0 and the same mac_address needs to be > added for port1, driver needs to pass BIT(port0) | BIT(port1) to the > icssg_fdb_add_del() API. If driver just pass BIT(port1) then the entry for > port0 will be overwritten / lost. This is a design constraint on the > firmware side. > > To overcome this in the driver, to add any mac_address for let's say portX > driver first checks if the same mac_address is already added for any other > port. If yes driver calls icssg_fdb_add_del() with BIT(portX) | > BIT(other_existing_port). If not, driver calls icssg_fdb_add_del() with > BIT(portX). > > The same thing is applicable for deleting mac_addresses as well. This > logic is in icssg_prueth_add_mcast / icssg_prueth_del_mcast APIs. > > Signed-off-by: MD Danish Anwar <danishanwar@ti.com> > --- > Cc: Wojciech Drewek <wojciech.drewek@intel.com> > > v2 -> v3: > *) Using __dev_mc_sync() instead of __hw_addr_sync_dev(). > *) Stopped keeping local copy of multicast list as pointed out by > Wojciech Drewek <wojciech.drewek@intel.com> Thank you! Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> > > v1 -> v2: > *) Rebased on latest net-next/main. > > NOTE: This series can be applied cleanly on the tip of net-next/main. This > series doesn't depend on any other ICSSG driver related series that is > floating around in netdev. > > v1 https://lore.kernel.org/all/20240516091752.2969092-1-danishanwar@ti.com/ > v2 https://lore.kernel.org/all/20240604114402.1835973-1-danishanwar@ti.com/ > > drivers/net/ethernet/ti/icssg/icssg_prueth.c | 38 +++++++++++++++++--- > 1 file changed, 34 insertions(+), 4 deletions(-) > <...>
Hello: This patch was applied to netdev/net-next.git (main) by David S. Miller <davem@davemloft.net>: On Wed, 5 Jun 2024 15:22:23 +0530 you wrote: > Add multicast filtering support for ICSSG Driver. Multicast addresses will > be updated by __dev_mc_sync() API. icssg_prueth_add_macst () and > icssg_prueth_del_mcast() will be sync and unsync APIs for the driver > respectively. > > To add a mac_address for a port, driver needs to call icssg_fdb_add_del() > and pass the mac_address and BIT(port_id) to the API. The ICSSG firmware > will then configure the rules and allow filtering. > > [...] Here is the summary with links: - [net-next,v3] net: ti: icssg-prueth: Add multicast filtering support https://git.kernel.org/netdev/net-next/c/a99997323654 You are awesome, thank you!
diff --git a/drivers/net/ethernet/ti/icssg/icssg_prueth.c b/drivers/net/ethernet/ti/icssg/icssg_prueth.c index 6e65aa0977d4..e13835100754 100644 --- a/drivers/net/ethernet/ti/icssg/icssg_prueth.c +++ b/drivers/net/ethernet/ti/icssg/icssg_prueth.c @@ -439,6 +439,37 @@ const struct icss_iep_clockops prueth_iep_clockops = { .perout_enable = prueth_perout_enable, }; +static int icssg_prueth_add_mcast(struct net_device *ndev, const u8 *addr) +{ + struct prueth_emac *emac = netdev_priv(ndev); + int port_mask = BIT(emac->port_id); + + port_mask |= icssg_fdb_lookup(emac, addr, 0); + icssg_fdb_add_del(emac, addr, 0, port_mask, true); + icssg_vtbl_modify(emac, 0, port_mask, port_mask, true); + + return 0; +} + +static int icssg_prueth_del_mcast(struct net_device *ndev, const u8 *addr) +{ + struct prueth_emac *emac = netdev_priv(ndev); + int port_mask = BIT(emac->port_id); + int other_port_mask; + + other_port_mask = port_mask ^ icssg_fdb_lookup(emac, addr, 0); + + icssg_fdb_add_del(emac, addr, 0, port_mask, false); + icssg_vtbl_modify(emac, 0, port_mask, port_mask, false); + + if (other_port_mask) { + icssg_fdb_add_del(emac, addr, 0, other_port_mask, true); + icssg_vtbl_modify(emac, 0, other_port_mask, other_port_mask, true); + } + + return 0; +} + /** * emac_ndo_open - EMAC device open * @ndev: network adapter device @@ -599,6 +630,8 @@ static int emac_ndo_stop(struct net_device *ndev) icssg_class_disable(prueth->miig_rt, prueth_emac_slice(emac)); + __dev_mc_unsync(ndev, icssg_prueth_del_mcast); + atomic_set(&emac->tdown_cnt, emac->tx_ch_num); /* ensure new tdown_cnt value is visible */ smp_mb__after_atomic(); @@ -675,10 +708,7 @@ static void emac_ndo_set_rx_mode_work(struct work_struct *work) return; } - if (!netdev_mc_empty(ndev)) { - emac_set_port_state(emac, ICSSG_EMAC_PORT_MC_FLOODING_ENABLE); - return; - } + __dev_mc_sync(ndev, icssg_prueth_add_mcast, icssg_prueth_del_mcast); } /**
Add multicast filtering support for ICSSG Driver. Multicast addresses will be updated by __dev_mc_sync() API. icssg_prueth_add_macst () and icssg_prueth_del_mcast() will be sync and unsync APIs for the driver respectively. To add a mac_address for a port, driver needs to call icssg_fdb_add_del() and pass the mac_address and BIT(port_id) to the API. The ICSSG firmware will then configure the rules and allow filtering. If a mac_address is added to port0 and the same mac_address needs to be added for port1, driver needs to pass BIT(port0) | BIT(port1) to the icssg_fdb_add_del() API. If driver just pass BIT(port1) then the entry for port0 will be overwritten / lost. This is a design constraint on the firmware side. To overcome this in the driver, to add any mac_address for let's say portX driver first checks if the same mac_address is already added for any other port. If yes driver calls icssg_fdb_add_del() with BIT(portX) | BIT(other_existing_port). If not, driver calls icssg_fdb_add_del() with BIT(portX). The same thing is applicable for deleting mac_addresses as well. This logic is in icssg_prueth_add_mcast / icssg_prueth_del_mcast APIs. Signed-off-by: MD Danish Anwar <danishanwar@ti.com> --- Cc: Wojciech Drewek <wojciech.drewek@intel.com> v2 -> v3: *) Using __dev_mc_sync() instead of __hw_addr_sync_dev(). *) Stopped keeping local copy of multicast list as pointed out by Wojciech Drewek <wojciech.drewek@intel.com> v1 -> v2: *) Rebased on latest net-next/main. NOTE: This series can be applied cleanly on the tip of net-next/main. This series doesn't depend on any other ICSSG driver related series that is floating around in netdev. v1 https://lore.kernel.org/all/20240516091752.2969092-1-danishanwar@ti.com/ v2 https://lore.kernel.org/all/20240604114402.1835973-1-danishanwar@ti.com/ drivers/net/ethernet/ti/icssg/icssg_prueth.c | 38 +++++++++++++++++--- 1 file changed, 34 insertions(+), 4 deletions(-) base-commit: fd70f0443e24c3888bf4b7f198df6d705c9b8ab2