Message ID | 20240606-imx8qm-dts-usb-v1-4-565721b64f25@nxp.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | arm64: dts: imx8qm: add subsystem lvds and mipi | expand |
> Subject: [PATCH 4/7] arm64: dts: imx8qm-mek: add pwm and i2c in lvds > subsystem > > Add pwm[0,1] and i2c[0,1] in lvds subsystem. > > Signed-off-by: Frank Li <Frank.Li@nxp.com> > --- Reviewed-by: Peng Fan <peng.fan@nxp.com>
On Thu, Jun 6, 2024 at 3:47 PM Frank Li <Frank.Li@nxp.com> wrote: > + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 > + 10 11 12 13 14 15 16 17 18 19 > + 20 21 22 23 24 25 26 27 28 29 > + 30 31 32 33 34 35 36 37 38 39 > + 40 41 42 43 44 45 46 47 48 49 > + 50 51 52 53 54 55 56 57 58 59 > + 60 61 62 63 64 65 66 67 68 69 > + 70 71 72 73 74 75 76 77 78 79 > + 80 81 82 83 84 85 86 87 88 89 > + 90 91 92 93 94 95 96 97 98 99 > + 100>; You can use this instead: num-interpolated-steps = <100>;
Hi, Am Donnerstag, 6. Juni 2024, 20:46:58 CEST schrieb Frank Li: > Add pwm[0,1] and i2c[0,1] in lvds subsystem. > > Signed-off-by: Frank Li <Frank.Li@nxp.com> > --- > arch/arm64/boot/dts/freescale/imx8qm-mek.dts | 92 ++++++++++++++++++++++++++++ > 1 file changed, 92 insertions(+) > > diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts > index dbd478af2e474..80cb834d56bc2 100644 > --- a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts > +++ b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts > @@ -93,6 +93,42 @@ rsc_table1: memory@901ff000 { > }; > }; > > + lvds_backlight0: backlight-lvds0 { > + compatible = "pwm-backlight"; > + pwms = <&pwm_lvds0 0 100000 0>; > + > + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 > + 10 11 12 13 14 15 16 17 18 19 > + 20 21 22 23 24 25 26 27 28 29 > + 30 31 32 33 34 35 36 37 38 39 > + 40 41 42 43 44 45 46 47 48 49 > + 50 51 52 53 54 55 56 57 58 59 > + 60 61 62 63 64 65 66 67 68 69 > + 70 71 72 73 74 75 76 77 78 79 > + 80 81 82 83 84 85 86 87 88 89 > + 90 91 92 93 94 95 96 97 98 99 > + 100>; > + default-brightness-level = <80>; > + }; > + > + lvds_backlight1: backlight-lvds1 { > + compatible = "pwm-backlight"; > + pwms = <&pwm_lvds1 0 100000 0>; > + > + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 > + 10 11 12 13 14 15 16 17 18 19 > + 20 21 22 23 24 25 26 27 28 29 > + 30 31 32 33 34 35 36 37 38 39 > + 40 41 42 43 44 45 46 47 48 49 > + 50 51 52 53 54 55 56 57 58 59 > + 60 61 62 63 64 65 66 67 68 69 > + 70 71 72 73 74 75 76 77 78 79 > + 80 81 82 83 84 85 86 87 88 89 > + 90 91 92 93 94 95 96 97 98 99 > + 100>; > + default-brightness-level = <80>; > + }; > + > reg_usdhc2_vmmc: usdhc2-vmmc { > compatible = "regulator-fixed"; > regulator-name = "SD1_SPWR"; > @@ -334,6 +370,24 @@ wm8960: audio-codec@1a { > }; > }; > > +&i2c1_lvds0 { > + #address-cells = <1>; > + #size-cells = <0>; These two properties should be part of the .dtsi. > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_lvds0_lpi2c1>; > + clock-frequency = <100000>; > + status = "okay"; > +}; > + > +&i2c1_lvds1 { > + #address-cells = <1>; > + #size-cells = <0>; These two properties should be part of the .dtsi. Best regards, Alexander > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_lvds1_lpi2c1>; > + clock-frequency = <100000>; > + status = "okay"; > +}; > + > &flexcan1 { > pinctrl-names = "default"; > pinctrl-0 = <&pinctrl_flexcan1>; > @@ -449,6 +503,18 @@ &fec2 { > status = "okay"; > }; > > +&pwm_lvds0 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_pwm_lvds0>; > + status = "okay"; > +}; > + > +&pwm_lvds1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_pwm_lvds1>; > + status = "okay"; > +}; > + > &usdhc1 { > pinctrl-names = "default"; > pinctrl-0 = <&pinctrl_usdhc1>; > @@ -675,6 +741,32 @@ IMX8QM_M41_GPIO0_01_DMA_UART3_TX 0x06000020 > >; > }; > > + pinctrl_lvds0_lpi2c1: lvds0lpi2c1grp { > + fsl,pins = < > + IMX8QM_LVDS0_I2C1_SCL_LVDS0_I2C1_SCL 0xc600004c > + IMX8QM_LVDS0_I2C1_SDA_LVDS0_I2C1_SDA 0xc600004c > + >; > + }; > + > + pinctrl_lvds1_lpi2c1: lvds1lpi2c1grp { > + fsl,pins = < > + IMX8QM_LVDS1_I2C1_SCL_LVDS1_I2C1_SCL 0xc600004c > + IMX8QM_LVDS1_I2C1_SDA_LVDS1_I2C1_SDA 0xc600004c > + >; > + }; > + > + pinctrl_pwm_lvds0: pwmlvds0grp { > + fsl,pins = < > + IMX8QM_LVDS0_GPIO00_LVDS0_PWM0_OUT 0x00000020 > + >; > + }; > + > + pinctrl_pwm_lvds1: pwmlvds1grp { > + fsl,pins = < > + IMX8QM_LVDS1_GPIO00_LVDS1_PWM0_OUT 0x00000020 > + >; > + }; > + > pinctrl_sai0: sai0grp { > fsl,pins = < > IMX8QM_SPI0_CS1_AUD_SAI0_TXC 0x0600004c > >
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts index dbd478af2e474..80cb834d56bc2 100644 --- a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts +++ b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts @@ -93,6 +93,42 @@ rsc_table1: memory@901ff000 { }; }; + lvds_backlight0: backlight-lvds0 { + compatible = "pwm-backlight"; + pwms = <&pwm_lvds0 0 100000 0>; + + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100>; + default-brightness-level = <80>; + }; + + lvds_backlight1: backlight-lvds1 { + compatible = "pwm-backlight"; + pwms = <&pwm_lvds1 0 100000 0>; + + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100>; + default-brightness-level = <80>; + }; + reg_usdhc2_vmmc: usdhc2-vmmc { compatible = "regulator-fixed"; regulator-name = "SD1_SPWR"; @@ -334,6 +370,24 @@ wm8960: audio-codec@1a { }; }; +&i2c1_lvds0 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lvds0_lpi2c1>; + clock-frequency = <100000>; + status = "okay"; +}; + +&i2c1_lvds1 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lvds1_lpi2c1>; + clock-frequency = <100000>; + status = "okay"; +}; + &flexcan1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flexcan1>; @@ -449,6 +503,18 @@ &fec2 { status = "okay"; }; +&pwm_lvds0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm_lvds0>; + status = "okay"; +}; + +&pwm_lvds1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm_lvds1>; + status = "okay"; +}; + &usdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1>; @@ -675,6 +741,32 @@ IMX8QM_M41_GPIO0_01_DMA_UART3_TX 0x06000020 >; }; + pinctrl_lvds0_lpi2c1: lvds0lpi2c1grp { + fsl,pins = < + IMX8QM_LVDS0_I2C1_SCL_LVDS0_I2C1_SCL 0xc600004c + IMX8QM_LVDS0_I2C1_SDA_LVDS0_I2C1_SDA 0xc600004c + >; + }; + + pinctrl_lvds1_lpi2c1: lvds1lpi2c1grp { + fsl,pins = < + IMX8QM_LVDS1_I2C1_SCL_LVDS1_I2C1_SCL 0xc600004c + IMX8QM_LVDS1_I2C1_SDA_LVDS1_I2C1_SDA 0xc600004c + >; + }; + + pinctrl_pwm_lvds0: pwmlvds0grp { + fsl,pins = < + IMX8QM_LVDS0_GPIO00_LVDS0_PWM0_OUT 0x00000020 + >; + }; + + pinctrl_pwm_lvds1: pwmlvds1grp { + fsl,pins = < + IMX8QM_LVDS1_GPIO00_LVDS1_PWM0_OUT 0x00000020 + >; + }; + pinctrl_sai0: sai0grp { fsl,pins = < IMX8QM_SPI0_CS1_AUD_SAI0_TXC 0x0600004c
Add pwm[0,1] and i2c[0,1] in lvds subsystem. Signed-off-by: Frank Li <Frank.Li@nxp.com> --- arch/arm64/boot/dts/freescale/imx8qm-mek.dts | 92 ++++++++++++++++++++++++++++ 1 file changed, 92 insertions(+)