diff mbox series

[7/7] arm64: dts: imx8qm-mek: add usb 3.0 and related type C nodes

Message ID 20240606-imx8qm-dts-usb-v1-7-565721b64f25@nxp.com (mailing list archive)
State New, archived
Headers show
Series arm64: dts: imx8qm: add subsystem lvds and mipi | expand

Commit Message

Frank Li June 6, 2024, 6:47 p.m. UTC 
Enable usb3.0 and related usb type C nodes.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8qm-mek.dts | 87 ++++++++++++++++++++++++++++
 1 file changed, 87 insertions(+)

Comments

Peng Fan June 7, 2024, 1:40 a.m. UTC | #1 
> Subject: [PATCH 7/7] arm64: dts: imx8qm-mek: add usb 3.0 and related type
> C nodes
> 
> Enable usb3.0 and related usb type C nodes.
> 
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
> ---
>  arch/arm64/boot/dts/freescale/imx8qm-mek.dts | 87
> ++++++++++++++++++++++++++++
>  1 file changed, 87 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
> b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
> index dedcc1b1bf12f..f6e2f1573f6ab 100644
> --- a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
> @@ -7,6 +7,7 @@
>  /dts-v1/;
> 
>  #include "imx8qm.dtsi"
> +#include "dt-bindings/usb/pd.h"

#include <dt-bindings/usb/pd.h> ? and move before "imx8qm.dtsi" ?

> 
>  / {
>  	model = "Freescale i.MX8QM MEK";
> @@ -129,6 +130,21 @@ lvds_backlight1: backlight-lvds1 {
>  		default-brightness-level = <80>;
>  	};
> 
> +	gpio-sbu-mux {

use mux-controller?

Regards,
Peng
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
index dedcc1b1bf12f..f6e2f1573f6ab 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
@@ -7,6 +7,7 @@ 
 /dts-v1/;
 
 #include "imx8qm.dtsi"
+#include "dt-bindings/usb/pd.h"
 
 / {
 	model = "Freescale i.MX8QM MEK";
@@ -129,6 +130,21 @@  lvds_backlight1: backlight-lvds1 {
 		default-brightness-level = <80>;
 	};
 
+	gpio-sbu-mux {
+		compatible = "nxp,cbdtu02043", "gpio-sbu-mux";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_typec_mux>;
+		select-gpios = <&lsio_gpio4 6 GPIO_ACTIVE_LOW>;
+		enable-gpios = <&lsio_gpio4 19 GPIO_ACTIVE_HIGH>;
+		orientation-switch;
+
+		port {
+			usb3_data_ss: endpoint {
+				remote-endpoint = <&typec_con_ss>;
+			};
+		};
+	};
+
 	reg_usdhc2_vmmc: usdhc2-vmmc {
 		compatible = "regulator-fixed";
 		regulator-name = "SD1_SPWR";
@@ -341,6 +357,44 @@  gyrometer@69 {
 		compatible = "st,l3g4200d-gyro";
 		reg = <0x69>;
 	};
+
+	ptn5110: tcpc@51 {
+		compatible = "nxp,ptn5110", "tcpci";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_typec>;
+		reg = <0x51>;
+		interrupt-parent = <&lsio_gpio4>;
+		interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+		status = "okay";
+
+		usb_con1: connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			power-role = "source";
+			data-role = "dual";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					typec_dr_sw: endpoint {
+						remote-endpoint = <&usb3_drd_sw>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					typec_con_ss: endpoint {
+						remote-endpoint = <&usb3_data_ss>;
+					};
+				};
+			};
+		};
+	};
 };
 
 &i2c1 {
@@ -553,6 +607,26 @@  &usdhc2 {
 	status = "okay";
 };
 
+&usb3_phy {
+	status = "okay";
+};
+
+&usbotg3 {
+	status = "okay";
+};
+
+&usbotg3_cdns3 {
+	dr_mode = "otg";
+	usb-role-switch;
+	status = "okay";
+
+	port {
+		usb3_drd_sw: endpoint {
+			remote-endpoint = <&typec_dr_sw>;
+		};
+	};
+};
+
 &sai0 {
 	#sound-dai-cells = <0>;
 	assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
@@ -819,6 +893,19 @@  IMX8QM_SAI1_TXC_AUD_SAI1_TXC				0x06000040
 		>;
 	};
 
+	pinctrl_typec: typecgrp {
+		fsl,pins = <
+			IMX8QM_QSPI1A_DATA0_LSIO_GPIO4_IO26		0x00000021
+		>;
+	};
+
+	pinctrl_typec_mux: typecmuxgrp {
+		fsl,pins = <
+			IMX8QM_QSPI1A_SS0_B_LSIO_GPIO4_IO19		0x60
+			IMX8QM_USB_SS3_TC3_LSIO_GPIO4_IO06		0x60
+		>;
+	};
+
 	pinctrl_usdhc1: usdhc1grp {
 		fsl,pins = <
 			IMX8QM_EMMC0_CLK_CONN_EMMC0_CLK				0x06000041