diff mbox series

[net-next,v3] net: ti: icssg-prueth: Add multicast filtering support

Message ID 20240605095223.2556963-1-danishanwar@ti.com (mailing list archive)
State New, archived
Headers show
Series [net-next,v3] net: ti: icssg-prueth: Add multicast filtering support | expand

Commit Message

MD Danish Anwar June 5, 2024, 9:52 a.m. UTC
Add multicast filtering support for ICSSG Driver. Multicast addresses will
be updated by __dev_mc_sync() API. icssg_prueth_add_macst () and
icssg_prueth_del_mcast() will be sync and unsync APIs for the driver
respectively.

To add a mac_address for a port, driver needs to call icssg_fdb_add_del()
and pass the mac_address and BIT(port_id) to the API. The ICSSG firmware
will then configure the rules and allow filtering.

If a mac_address is added to port0 and the same mac_address needs to be
added for port1, driver needs to pass BIT(port0) | BIT(port1) to the
icssg_fdb_add_del() API. If driver just pass BIT(port1) then the entry for
port0 will be overwritten / lost. This is a design constraint on the
firmware side.

To overcome this in the driver, to add any mac_address for let's say portX
driver first checks if the same mac_address is already added for any other
port. If yes driver calls icssg_fdb_add_del() with BIT(portX) |
BIT(other_existing_port). If not, driver calls icssg_fdb_add_del() with
BIT(portX).

The same thing is applicable for deleting mac_addresses as well. This
logic is in icssg_prueth_add_mcast / icssg_prueth_del_mcast APIs.

Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
---
Cc: Wojciech Drewek <wojciech.drewek@intel.com>

v2 -> v3:
*) Using __dev_mc_sync() instead of __hw_addr_sync_dev().
*) Stopped keeping local copy of multicast list as pointed out by
   Wojciech Drewek <wojciech.drewek@intel.com>

v1 -> v2:
*) Rebased on latest net-next/main.

NOTE: This series can be applied cleanly on the tip of net-next/main. This
series doesn't depend on any other ICSSG driver related series that is
floating around in netdev.

v1 https://lore.kernel.org/all/20240516091752.2969092-1-danishanwar@ti.com/
v2 https://lore.kernel.org/all/20240604114402.1835973-1-danishanwar@ti.com/

 drivers/net/ethernet/ti/icssg/icssg_prueth.c | 38 +++++++++++++++++---
 1 file changed, 34 insertions(+), 4 deletions(-)


base-commit: fd70f0443e24c3888bf4b7f198df6d705c9b8ab2

Comments

Wojciech Drewek June 5, 2024, 10:02 a.m. UTC | #1
On 05.06.2024 11:52, MD Danish Anwar wrote:
> Add multicast filtering support for ICSSG Driver. Multicast addresses will
> be updated by __dev_mc_sync() API. icssg_prueth_add_macst () and
> icssg_prueth_del_mcast() will be sync and unsync APIs for the driver
> respectively.
> 
> To add a mac_address for a port, driver needs to call icssg_fdb_add_del()
> and pass the mac_address and BIT(port_id) to the API. The ICSSG firmware
> will then configure the rules and allow filtering.
> 
> If a mac_address is added to port0 and the same mac_address needs to be
> added for port1, driver needs to pass BIT(port0) | BIT(port1) to the
> icssg_fdb_add_del() API. If driver just pass BIT(port1) then the entry for
> port0 will be overwritten / lost. This is a design constraint on the
> firmware side.
> 
> To overcome this in the driver, to add any mac_address for let's say portX
> driver first checks if the same mac_address is already added for any other
> port. If yes driver calls icssg_fdb_add_del() with BIT(portX) |
> BIT(other_existing_port). If not, driver calls icssg_fdb_add_del() with
> BIT(portX).
> 
> The same thing is applicable for deleting mac_addresses as well. This
> logic is in icssg_prueth_add_mcast / icssg_prueth_del_mcast APIs.
> 
> Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
> ---
> Cc: Wojciech Drewek <wojciech.drewek@intel.com>
> 
> v2 -> v3:
> *) Using __dev_mc_sync() instead of __hw_addr_sync_dev().
> *) Stopped keeping local copy of multicast list as pointed out by
>    Wojciech Drewek <wojciech.drewek@intel.com>

Thank you!
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>

> 
> v1 -> v2:
> *) Rebased on latest net-next/main.
> 
> NOTE: This series can be applied cleanly on the tip of net-next/main. This
> series doesn't depend on any other ICSSG driver related series that is
> floating around in netdev.
> 
> v1 https://lore.kernel.org/all/20240516091752.2969092-1-danishanwar@ti.com/
> v2 https://lore.kernel.org/all/20240604114402.1835973-1-danishanwar@ti.com/
> 
>  drivers/net/ethernet/ti/icssg/icssg_prueth.c | 38 +++++++++++++++++---
>  1 file changed, 34 insertions(+), 4 deletions(-)
> 

<...>
patchwork-bot+netdevbpf@kernel.org June 7, 2024, 1:32 p.m. UTC | #2
Hello:

This patch was applied to netdev/net-next.git (main)
by David S. Miller <davem@davemloft.net>:

On Wed, 5 Jun 2024 15:22:23 +0530 you wrote:
> Add multicast filtering support for ICSSG Driver. Multicast addresses will
> be updated by __dev_mc_sync() API. icssg_prueth_add_macst () and
> icssg_prueth_del_mcast() will be sync and unsync APIs for the driver
> respectively.
> 
> To add a mac_address for a port, driver needs to call icssg_fdb_add_del()
> and pass the mac_address and BIT(port_id) to the API. The ICSSG firmware
> will then configure the rules and allow filtering.
> 
> [...]

Here is the summary with links:
  - [net-next,v3] net: ti: icssg-prueth: Add multicast filtering support
    https://git.kernel.org/netdev/net-next/c/a99997323654

You are awesome, thank you!
diff mbox series

Patch

diff --git a/drivers/net/ethernet/ti/icssg/icssg_prueth.c b/drivers/net/ethernet/ti/icssg/icssg_prueth.c
index 6e65aa0977d4..e13835100754 100644
--- a/drivers/net/ethernet/ti/icssg/icssg_prueth.c
+++ b/drivers/net/ethernet/ti/icssg/icssg_prueth.c
@@ -439,6 +439,37 @@  const struct icss_iep_clockops prueth_iep_clockops = {
 	.perout_enable = prueth_perout_enable,
 };
 
+static int icssg_prueth_add_mcast(struct net_device *ndev, const u8 *addr)
+{
+	struct prueth_emac *emac = netdev_priv(ndev);
+	int port_mask = BIT(emac->port_id);
+
+	port_mask |= icssg_fdb_lookup(emac, addr, 0);
+	icssg_fdb_add_del(emac, addr, 0, port_mask, true);
+	icssg_vtbl_modify(emac, 0, port_mask, port_mask, true);
+
+	return 0;
+}
+
+static int icssg_prueth_del_mcast(struct net_device *ndev, const u8 *addr)
+{
+	struct prueth_emac *emac = netdev_priv(ndev);
+	int port_mask = BIT(emac->port_id);
+	int other_port_mask;
+
+	other_port_mask = port_mask ^ icssg_fdb_lookup(emac, addr, 0);
+
+	icssg_fdb_add_del(emac, addr, 0, port_mask, false);
+	icssg_vtbl_modify(emac, 0, port_mask, port_mask, false);
+
+	if (other_port_mask) {
+		icssg_fdb_add_del(emac, addr, 0, other_port_mask, true);
+		icssg_vtbl_modify(emac, 0, other_port_mask, other_port_mask, true);
+	}
+
+	return 0;
+}
+
 /**
  * emac_ndo_open - EMAC device open
  * @ndev: network adapter device
@@ -599,6 +630,8 @@  static int emac_ndo_stop(struct net_device *ndev)
 
 	icssg_class_disable(prueth->miig_rt, prueth_emac_slice(emac));
 
+	__dev_mc_unsync(ndev, icssg_prueth_del_mcast);
+
 	atomic_set(&emac->tdown_cnt, emac->tx_ch_num);
 	/* ensure new tdown_cnt value is visible */
 	smp_mb__after_atomic();
@@ -675,10 +708,7 @@  static void emac_ndo_set_rx_mode_work(struct work_struct *work)
 		return;
 	}
 
-	if (!netdev_mc_empty(ndev)) {
-		emac_set_port_state(emac, ICSSG_EMAC_PORT_MC_FLOODING_ENABLE);
-		return;
-	}
+	__dev_mc_sync(ndev, icssg_prueth_add_mcast, icssg_prueth_del_mcast);
 }
 
 /**