| Message ID | 20240604085252.3686037-5-s-vadapalli@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add PCIe, SERDES and USB DT support for J722S | expand |
On 04/06/24 14:22, Siddharth Vadapalli wrote: > Update "k3-j722s.dtsi" to use "k3-am62p-j722s-common.dtsi" which > contains the nodes shared with AM62P, followed by including the J722S > specific main domain peripherals contained in "k3-j722s-main.dtsi". > > Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> > --- > v4: > https://lore.kernel.org/r/20240601121554.2860403-5-s-vadapalli@ti.com/ > No changes since v4. > > arch/arm64/boot/dts/ti/k3-j722s.dtsi | 97 +++++++++++++++++++++++++++- > 1 file changed, 96 insertions(+), 1 deletion(-) > > diff --git a/arch/arm64/boot/dts/ti/k3-j722s.dtsi b/arch/arm64/boot/dts/ti/k3-j722s.dtsi > index c75744edb143..9e04e6a5c0fd 100644 > --- a/arch/arm64/boot/dts/ti/k3-j722s.dtsi > +++ b/arch/arm64/boot/dts/ti/k3-j722s.dtsi > @@ -10,12 +10,107 @@ > #include <dt-bindings/interrupt-controller/arm-gic.h> > #include <dt-bindings/soc/ti,sci_pm_domain.h> > > -#include "k3-am62p5.dtsi" > +#include "k3-am62p-j722s-common.dtsi" > +#include "k3-j722s-main.dtsi" > > / { > model = "Texas Instruments K3 J722S SoC"; > compatible = "ti,j722s"; > > + cpus { > + #address-cells = <1>; > + #size-cells = <0>; > + > + cpu-map { > + cluster0: cluster0 { > + core0 { > + cpu = <&cpu0>; > + }; > + > + core1 { > + cpu = <&cpu1>; > + }; > + > + core2 { > + cpu = <&cpu2>; > + }; > + > + core3 { > + cpu = <&cpu3>; > + }; > + }; > + }; > + > + cpu0: cpu@0 { > + compatible = "arm,cortex-a53"; > + reg = <0x000>; > + device_type = "cpu"; > + enable-method = "psci"; > + i-cache-size = <0x8000>; > + i-cache-line-size = <64>; > + i-cache-sets = <256>; > + d-cache-size = <0x8000>; > + d-cache-line-size = <64>; > + d-cache-sets = <128>; > + next-level-cache = <&l2_0>; > + clocks = <&k3_clks 135 0>; > + }; > + > + cpu1: cpu@1 { > + compatible = "arm,cortex-a53"; > + reg = <0x001>; > + device_type = "cpu"; > + enable-method = "psci"; > + i-cache-size = <0x8000>; > + i-cache-line-size = <64>; > + i-cache-sets = <256>; > + d-cache-size = <0x8000>; > + d-cache-line-size = <64>; > + d-cache-sets = <128>; > + next-level-cache = <&l2_0>; > + clocks = <&k3_clks 136 0>; > + }; > + > + cpu2: cpu@2 { > + compatible = "arm,cortex-a53"; > + reg = <0x002>; > + device_type = "cpu"; > + enable-method = "psci"; > + i-cache-size = <0x8000>; > + i-cache-line-size = <64>; > + i-cache-sets = <256>; > + d-cache-size = <0x8000>; > + d-cache-line-size = <64>; > + d-cache-sets = <128>; > + next-level-cache = <&l2_0>; > + clocks = <&k3_clks 137 0>; > + }; > + > + cpu3: cpu@3 { > + compatible = "arm,cortex-a53"; > + reg = <0x003>; > + device_type = "cpu"; > + enable-method = "psci"; > + i-cache-size = <0x8000>; > + i-cache-line-size = <64>; > + i-cache-sets = <256>; > + d-cache-size = <0x8000>; > + d-cache-line-size = <64>; > + d-cache-sets = <128>; > + next-level-cache = <&l2_0>; > + clocks = <&k3_clks 138 0>; > + }; > + }; > + > + l2_0: l2-cache0 { > + compatible = "cache"; > + cache-unified; > + cache-level = <2>; > + cache-size = <0x80000>; > + cache-line-size = <64>; > + cache-sets = <512>; > + }; > + > cbass_main: bus@f0000 { > compatible = "simple-bus"; > #address-cells = <2>; You would need to move the rest of main domain overrides and cbass_main definitions to k3-j722s-main.dtsi and limit this file to CPU definitions similar to k3-am62p5.dtsi
On 06/06/2024 07:05, Vignesh Raghavendra wrote: > > > On 04/06/24 14:22, Siddharth Vadapalli wrote: >> Update "k3-j722s.dtsi" to use "k3-am62p-j722s-common.dtsi" which >> contains the nodes shared with AM62P, followed by including the J722S >> specific main domain peripherals contained in "k3-j722s-main.dtsi". >> >> Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> >> --- >> v4: >> https://lore.kernel.org/r/20240601121554.2860403-5-s-vadapalli@ti.com/ >> No changes since v4. >> >> arch/arm64/boot/dts/ti/k3-j722s.dtsi | 97 +++++++++++++++++++++++++++- >> 1 file changed, 96 insertions(+), 1 deletion(-) >> >> diff --git a/arch/arm64/boot/dts/ti/k3-j722s.dtsi b/arch/arm64/boot/dts/ti/k3-j722s.dtsi >> index c75744edb143..9e04e6a5c0fd 100644 >> --- a/arch/arm64/boot/dts/ti/k3-j722s.dtsi >> +++ b/arch/arm64/boot/dts/ti/k3-j722s.dtsi >> @@ -10,12 +10,107 @@ >> #include <dt-bindings/interrupt-controller/arm-gic.h> >> #include <dt-bindings/soc/ti,sci_pm_domain.h> >> >> -#include "k3-am62p5.dtsi" >> +#include "k3-am62p-j722s-common.dtsi" >> +#include "k3-j722s-main.dtsi" >> >> / { >> model = "Texas Instruments K3 J722S SoC"; >> compatible = "ti,j722s"; >> >> + cpus { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + >> + cpu-map { >> + cluster0: cluster0 { >> + core0 { >> + cpu = <&cpu0>; >> + }; >> + >> + core1 { >> + cpu = <&cpu1>; >> + }; >> + >> + core2 { >> + cpu = <&cpu2>; >> + }; >> + >> + core3 { >> + cpu = <&cpu3>; >> + }; >> + }; >> + }; >> + >> + cpu0: cpu@0 { >> + compatible = "arm,cortex-a53"; >> + reg = <0x000>; >> + device_type = "cpu"; >> + enable-method = "psci"; >> + i-cache-size = <0x8000>; >> + i-cache-line-size = <64>; >> + i-cache-sets = <256>; >> + d-cache-size = <0x8000>; >> + d-cache-line-size = <64>; >> + d-cache-sets = <128>; >> + next-level-cache = <&l2_0>; >> + clocks = <&k3_clks 135 0>; >> + }; >> + >> + cpu1: cpu@1 { >> + compatible = "arm,cortex-a53"; >> + reg = <0x001>; >> + device_type = "cpu"; >> + enable-method = "psci"; >> + i-cache-size = <0x8000>; >> + i-cache-line-size = <64>; >> + i-cache-sets = <256>; >> + d-cache-size = <0x8000>; >> + d-cache-line-size = <64>; >> + d-cache-sets = <128>; >> + next-level-cache = <&l2_0>; >> + clocks = <&k3_clks 136 0>; >> + }; >> + >> + cpu2: cpu@2 { >> + compatible = "arm,cortex-a53"; >> + reg = <0x002>; >> + device_type = "cpu"; >> + enable-method = "psci"; >> + i-cache-size = <0x8000>; >> + i-cache-line-size = <64>; >> + i-cache-sets = <256>; >> + d-cache-size = <0x8000>; >> + d-cache-line-size = <64>; >> + d-cache-sets = <128>; >> + next-level-cache = <&l2_0>; >> + clocks = <&k3_clks 137 0>; >> + }; >> + >> + cpu3: cpu@3 { >> + compatible = "arm,cortex-a53"; >> + reg = <0x003>; >> + device_type = "cpu"; >> + enable-method = "psci"; >> + i-cache-size = <0x8000>; >> + i-cache-line-size = <64>; >> + i-cache-sets = <256>; >> + d-cache-size = <0x8000>; >> + d-cache-line-size = <64>; >> + d-cache-sets = <128>; >> + next-level-cache = <&l2_0>; >> + clocks = <&k3_clks 138 0>; >> + }; >> + }; >> + >> + l2_0: l2-cache0 { >> + compatible = "cache"; >> + cache-unified; >> + cache-level = <2>; >> + cache-size = <0x80000>; >> + cache-line-size = <64>; >> + cache-sets = <512>; >> + }; >> + >> cbass_main: bus@f0000 { >> compatible = "simple-bus"; >> #address-cells = <2>; > > > You would need to move the rest of main domain overrides and cbass_main > definitions to k3-j722s-main.dtsi and limit this file to CPU definitions > similar to k3-am62p5.dtsi Not exactly. In existing cases there are 2 soc.dtsi files. e.g. k3-am62p.dtsi and k3-am62p5.dtsi. or k3-am2.dtsi and k3-am625.dtsi. The former includes everything that is required for the SOC variant except the CPU, OPP and cache. The later includes just the CPU, OPP and cache. I suppose this only makes sense if there are multiple variants of the SoC where only the number of CPUs change. Would this be the case for J722S? If not then one soc.dtsi file should be sufficient. If yes then we need to have 2 soc.dtsi files for J722S like the rest.
On 06/06/24 13:04, Roger Quadros wrote: > > > On 06/06/2024 07:05, Vignesh Raghavendra wrote: >> >> >> On 04/06/24 14:22, Siddharth Vadapalli wrote: >>> Update "k3-j722s.dtsi" to use "k3-am62p-j722s-common.dtsi" which >>> contains the nodes shared with AM62P, followed by including the J722S >>> specific main domain peripherals contained in "k3-j722s-main.dtsi". >>> >>> Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> >>> --- >>> v4: >>> https://lore.kernel.org/r/20240601121554.2860403-5-s-vadapalli@ti.com/ >>> No changes since v4. >>> >>> arch/arm64/boot/dts/ti/k3-j722s.dtsi | 97 +++++++++++++++++++++++++++- >>> 1 file changed, 96 insertions(+), 1 deletion(-) >>> >>> diff --git a/arch/arm64/boot/dts/ti/k3-j722s.dtsi b/arch/arm64/boot/dts/ti/k3-j722s.dtsi >>> index c75744edb143..9e04e6a5c0fd 100644 >>> --- a/arch/arm64/boot/dts/ti/k3-j722s.dtsi >>> +++ b/arch/arm64/boot/dts/ti/k3-j722s.dtsi >>> @@ -10,12 +10,107 @@ >>> #include <dt-bindings/interrupt-controller/arm-gic.h> >>> #include <dt-bindings/soc/ti,sci_pm_domain.h> >>> >>> -#include "k3-am62p5.dtsi" >>> +#include "k3-am62p-j722s-common.dtsi" >>> +#include "k3-j722s-main.dtsi" >>> >>> / { >>> model = "Texas Instruments K3 J722S SoC"; >>> compatible = "ti,j722s"; >>> >>> + cpus { >>> + #address-cells = <1>; >>> + #size-cells = <0>; >>> + >>> + cpu-map { >>> + cluster0: cluster0 { >>> + core0 { >>> + cpu = <&cpu0>; >>> + }; >>> + >>> + core1 { >>> + cpu = <&cpu1>; >>> + }; >>> + >>> + core2 { >>> + cpu = <&cpu2>; >>> + }; >>> + >>> + core3 { >>> + cpu = <&cpu3>; >>> + }; >>> + }; >>> + }; >>> + >>> + cpu0: cpu@0 { >>> + compatible = "arm,cortex-a53"; >>> + reg = <0x000>; >>> + device_type = "cpu"; >>> + enable-method = "psci"; >>> + i-cache-size = <0x8000>; >>> + i-cache-line-size = <64>; >>> + i-cache-sets = <256>; >>> + d-cache-size = <0x8000>; >>> + d-cache-line-size = <64>; >>> + d-cache-sets = <128>; >>> + next-level-cache = <&l2_0>; >>> + clocks = <&k3_clks 135 0>; >>> + }; >>> + >>> + cpu1: cpu@1 { >>> + compatible = "arm,cortex-a53"; >>> + reg = <0x001>; >>> + device_type = "cpu"; >>> + enable-method = "psci"; >>> + i-cache-size = <0x8000>; >>> + i-cache-line-size = <64>; >>> + i-cache-sets = <256>; >>> + d-cache-size = <0x8000>; >>> + d-cache-line-size = <64>; >>> + d-cache-sets = <128>; >>> + next-level-cache = <&l2_0>; >>> + clocks = <&k3_clks 136 0>; >>> + }; >>> + >>> + cpu2: cpu@2 { >>> + compatible = "arm,cortex-a53"; >>> + reg = <0x002>; >>> + device_type = "cpu"; >>> + enable-method = "psci"; >>> + i-cache-size = <0x8000>; >>> + i-cache-line-size = <64>; >>> + i-cache-sets = <256>; >>> + d-cache-size = <0x8000>; >>> + d-cache-line-size = <64>; >>> + d-cache-sets = <128>; >>> + next-level-cache = <&l2_0>; >>> + clocks = <&k3_clks 137 0>; >>> + }; >>> + >>> + cpu3: cpu@3 { >>> + compatible = "arm,cortex-a53"; >>> + reg = <0x003>; >>> + device_type = "cpu"; >>> + enable-method = "psci"; >>> + i-cache-size = <0x8000>; >>> + i-cache-line-size = <64>; >>> + i-cache-sets = <256>; >>> + d-cache-size = <0x8000>; >>> + d-cache-line-size = <64>; >>> + d-cache-sets = <128>; >>> + next-level-cache = <&l2_0>; >>> + clocks = <&k3_clks 138 0>; >>> + }; >>> + }; >>> + >>> + l2_0: l2-cache0 { >>> + compatible = "cache"; >>> + cache-unified; >>> + cache-level = <2>; >>> + cache-size = <0x80000>; >>> + cache-line-size = <64>; >>> + cache-sets = <512>; >>> + }; >>> + >>> cbass_main: bus@f0000 { >>> compatible = "simple-bus"; >>> #address-cells = <2>; >> >> >> You would need to move the rest of main domain overrides and cbass_main >> definitions to k3-j722s-main.dtsi and limit this file to CPU definitions >> similar to k3-am62p5.dtsi > > Not exactly. > In existing cases there are 2 soc.dtsi files. e.g. k3-am62p.dtsi and k3-am62p5.dtsi. > or k3-am2.dtsi and k3-am625.dtsi. > > The former includes everything that is required for the SOC variant except the CPU, OPP and cache. > The later includes just the CPU, OPP and cache. > > I suppose this only makes sense if there are multiple variants of the SoC where only > the number of CPUs change. Would this be the case for J722S? Part numbers with different OPPs are expected besides difference in number of cores for J722s. > > If not then one soc.dtsi file should be sufficient. If yes then we need to have 2 soc.dtsi files > for J722S like the rest. >
diff --git a/arch/arm64/boot/dts/ti/k3-j722s.dtsi b/arch/arm64/boot/dts/ti/k3-j722s.dtsi index c75744edb143..9e04e6a5c0fd 100644 --- a/arch/arm64/boot/dts/ti/k3-j722s.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j722s.dtsi @@ -10,12 +10,107 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/soc/ti,sci_pm_domain.h> -#include "k3-am62p5.dtsi" +#include "k3-am62p-j722s-common.dtsi" +#include "k3-j722s-main.dtsi" / { model = "Texas Instruments K3 J722S SoC"; compatible = "ti,j722s"; + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu-map { + cluster0: cluster0 { + core0 { + cpu = <&cpu0>; + }; + + core1 { + cpu = <&cpu1>; + }; + + core2 { + cpu = <&cpu2>; + }; + + core3 { + cpu = <&cpu3>; + }; + }; + }; + + cpu0: cpu@0 { + compatible = "arm,cortex-a53"; + reg = <0x000>; + device_type = "cpu"; + enable-method = "psci"; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&l2_0>; + clocks = <&k3_clks 135 0>; + }; + + cpu1: cpu@1 { + compatible = "arm,cortex-a53"; + reg = <0x001>; + device_type = "cpu"; + enable-method = "psci"; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&l2_0>; + clocks = <&k3_clks 136 0>; + }; + + cpu2: cpu@2 { + compatible = "arm,cortex-a53"; + reg = <0x002>; + device_type = "cpu"; + enable-method = "psci"; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&l2_0>; + clocks = <&k3_clks 137 0>; + }; + + cpu3: cpu@3 { + compatible = "arm,cortex-a53"; + reg = <0x003>; + device_type = "cpu"; + enable-method = "psci"; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&l2_0>; + clocks = <&k3_clks 138 0>; + }; + }; + + l2_0: l2-cache0 { + compatible = "cache"; + cache-unified; + cache-level = <2>; + cache-size = <0x80000>; + cache-line-size = <64>; + cache-sets = <512>; + }; + cbass_main: bus@f0000 { compatible = "simple-bus"; #address-cells = <2>;
Update "k3-j722s.dtsi" to use "k3-am62p-j722s-common.dtsi" which contains the nodes shared with AM62P, followed by including the J722S specific main domain peripherals contained in "k3-j722s-main.dtsi". Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> --- v4: https://lore.kernel.org/r/20240601121554.2860403-5-s-vadapalli@ti.com/ No changes since v4. arch/arm64/boot/dts/ti/k3-j722s.dtsi | 97 +++++++++++++++++++++++++++- 1 file changed, 96 insertions(+), 1 deletion(-)