diff mbox series

kernel WARNING on lvm2 testsuite due to MD recovery running

Message ID ZmfmnReWfZxlezzD@redhat.com (mailing list archive)
State Superseded, archived
Delegated to: Benjamin Marzinski
Headers show
Series kernel WARNING on lvm2 testsuite due to MD recovery running | expand

Commit Message

Benjamin Marzinski June 11, 2024, 5:54 a.m. UTC 
Running the lvm2 testsuite test lvconvert-raid-takeover.sh will
frequently triggers the following kernel WARNING at
drivers/md/dm-raid.c:4105:

WARN_ON_ONCE(test_bit(MD_RECOVERY_RUNNING, &mddev->recovery));

(obviously since this is a WARN_ON_ONCE, you need to run
# echo 1 > /sys/kernel/debug/clear_warn_once
to see it multiple times per boot).

This issue started during the dmraid-fix-6.9 patchset, although before
that, this test was frequently hanging instead.

Here are the kernel messages around the WARNING:

--------------------------------------------

[ 3501.753486] device-mapper: raid: Device 0 specified for rebuild;
clearing sup
erblock
[ 3501.754571] device-mapper: raid: Superblocks created for new raid set
[ 3501.765179] md/raid:mdX: not clean -- starting background
reconstruction
[ 3501.765726] md/raid:mdX: device dm-13 operational as raid disk 1
[ 3501.766190] md/raid:mdX: device dm-15 operational as raid disk 2
[ 3501.766683] md/raid:mdX: device dm-17 operational as raid disk 3
[ 3501.767513] md/raid:mdX: raid level 5 active with 3 out of 4 devices,
algorit
hm 4
[ 3501.768105] device-mapper: raid: raid456 discard support disabled due
to disc
ard_zeroes_data uncertainty.
[ 3501.768866] device-mapper: raid: Set
dm-raid.devices_handle_discard_safely=Y
to override.
[ 3501.784007] mdX: bitmap file is out of date, doing full recovery
[ 3501.793924] md: recovery of RAID array mdX
[ 3501.799962] md/raid:mdX: not clean -- starting background
reconstruction
[ 3501.800524] md/raid:mdX: device dm-13 operational as raid disk 1
[ 3501.801008] md/raid:mdX: device dm-15 operational as raid disk 2
[ 3501.801479] md/raid:mdX: device dm-17 operational as raid disk 3
[ 3501.801800] md: mdX: recovery done.
[ 3501.802264] md/raid:mdX: raid level 5 active with 3 out of 4 devices,
algorithm 4
[ 3501.803087] device-mapper: raid: raid456 discard support disabled due
to discard_zeroes_data uncertainty.
[ 3501.803979] device-mapper: raid: Set
dm-raid.devices_handle_discard_safely=Y to override.
[ 3501.816712] md: resync of RAID array mdX
[ 3501.817265] md: mdX: resync interrupted.
[ 3501.888714] ------------[ cut here ]------------
RNING: CPU: 0 PID: 4049 at drivers/md/dm-raid.c:4105
raid_resume+0xee/0x100 [dm_raid]
[ 3501.893749] Modules linked in: raid1 raid0 brd dm_raid raid456
async_raid6_recov async_memcpy async_pq async_xor xor async_tx raid6_pq
nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet
nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat
nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set rfkill nf_tables
nfnetlink intel_rapl_msr intel_rapl_common intel_uncore_frequency_common
kvm_intel kvm iTCO_wdt iTCO_vendor_support rapl virtio_balloon i2c_i801
pcspkr i2c_smbus lpc_ich joydev drm fuse xfs libcrc32c ahci libahci
crct10dif_pclmul virtio_net crc32_pclmul net_failover libata
crc32c_intel failover ghash_clmulni_intel dimlib virtio_blk
virtio_console serio_raw dm_mirror dm_region_hash dm_log dm_mod
[ 3501.903305] CPU: 0 PID: 4049 Comm: lvm Kdump: loaded Not tainted
6.10.0-rc2 #1
[ 3501.904012] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
1.16.3-1.fc39 04/01/2014
[ 3501.904756] RIP: 0010:raid_resume+0xee/0x100 [dm_raid]
[ 3501.905185] Code: 48 85 69 ff 48 8b b3 80 01 00 00 48 89 c7 e8 a9 aa
e9 ce 48 8b 83 40 02 00 00 f6 c4 02 0f 85 58 ff ff ff 0f 0b e9 51 ff ff
ff <0f> 0b e9 59 ff ff ff 66 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90
[ 3501.906717] RSP: 0018:ff7151910117fc98 EFLAGS: 00010202
[ 3501.907181] RAX: 0000000000000209 RBX: ff2420d341bd8000 RCX:
ff7151910117fb60
[ 3501.907800] RDX: 0000000000010000 RSI: 0000000000000000 RDI:
ff2420d34a468840
[ 3501.908520] RBP: ff2420d341bd8058 R08: 0000000000000000 R09:
ffffffff8fdbcdad
[ 3501.909227] R10: ff2420d34e5dfa00 R11: 0000000000000200 R12:
0000000000000000
[ 3501.909958] R13: ff2420d35550ec00 R14: ff2420d3f08b9600 R15:
0000000000004800
[ 3501.910612] FS:  00007f1bdc778740(0000) GS:ff2420d4b7800000(0000)
knlGS:0000000000000000
[ 3501.911340] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 3501.911876] CR2: 000055c2cf0bbcf0 CR3: 000000011545a003 CR4:
0000000000771ef0
[ 3501.912451] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
[ 3501.913054] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7:
0000000000000400
[ 3501.913661] PKRU: 55555554
[ 3501.913906] Call Trace:
[ 3501.914166]  <TASK>
[ 3501.914381]  ? __warn+0x7f/0x120
[ 3501.914735]  ? raid_resume+0xee/0x100 [dm_raid]
[ 3501.915183]  ? report_bug+0x18a/0x1a0
[ 3501.915549]  ? handle_bug+0x3c/0x70
[ 3501.915887]  ? exc_invalid_op+0x14/0x70
[ 3501.916280]  ? asm_exc_invalid_op+0x16/0x20
[ 3501.916710]  ? super_written+0x2d/0x100
[ 3501.917111]  ? raid_resume+0xee/0x100 [dm_raid]
[ 3501.917560]  dm_table_resume_targets+0x80/0xe0 [dm_mod]
[ 3501.918081]  __dm_resume+0x16/0x70 [dm_mod]
[ 3501.918466]  dm_resume+0xab/0xc0 [dm_mod]
[ 3501.918867]  do_resume+0x15d/0x270 [dm_mod]
[ 3501.919288]  ctl_ioctl+0x203/0x350 [dm_mod]
[ 3501.919753]  dm_ctl_ioctl+0xa/0x20 [dm_mod]
[ 3501.920155]  __x64_sys_ioctl+0x8a/0xc0
[ 3501.920539]  do_syscall_64+0x79/0x150
[ 3501.920909]  ? clear_bhb_loop+0x25/0x80
[ 3501.921304]  ? clear_bhb_loop+0x25/0x80
[ 3501.921669]  ? clear_bhb_loop+0x25/0x80
[ 3501.922057]  entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 3501.922533] RIP: 0033:0x7f1bdc50357b
[ 3501.922933] Code: ff ff ff 85 c0 79 9b 49 c7 c4 ff ff ff ff 5b 5d 4c
89 e0 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa b8 10 00 00 00 0f
05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 75 68 0f 00 f7 d8 64 89 01 48
[ 3501.924716] RSP: 002b:00007fffe2d93e88 EFLAGS: 00000206 ORIG_RAX:
0000000000000010
[ 3501.925390] RAX: ffffffffffffffda RBX: 000055c2a50c7660 RCX:
00007f1bdc50357b
[ 3501.926017] RDX: 000055c2ce6b9c90 RSI: 00000000c138fd06 RDI:
0000000000000004
[ 3501.926595] RBP: 000055c2a51751ba R08: 0000000000000000 R09:
00000000000f4240
[ 3501.927164] R10: 0000000000000001 R11: 0000000000000206 R12:
000055c2ce6b9d40
[ 3501.927772] R13: 000055c2a51751ba R14: 000055c2ce6b9c90 R15:
000055c2ce6c7720
[ 3501.928478]  </TASK>
[ 3501.928728] ---[ end trace 0000000000000000 ]---
[ 3501.941257] md: recovery of RAID array mdX
[ 3501.946534] md: mdX: recovery interrupted.
[ 3502.004627] md: recovery of RAID array mdX
[ 3502.013666] md: mdX: recovery done.

-----------------------------------------

It appears that the issue is that when a dm-raid device table is first
loaded, raid_ctr() can set MD_RECOVERY_RUNNING through the following
call chain

md_run -> raidX_run -> setup_conf -> raidXd -> md_check_recovery

In md_check_recovery(), MD_RECOVERY_RUNNING can be set here, even though
MD_RECOVERY_FROZEN is already set:

                        /*
                         * Let md_start_sync() to remove and add rdevs
                         * to the
                         * array.
                         */
                        if (md_spares_need_change(mddev)) {
                                set_bit(MD_RECOVERY_RUNNING, &mddev->recovery);
                                queue_work(md_misc_wq, &mddev->sync_work);
                        }

To verify that this is the cause of the problem, the following naive
patch stops the kernel WARNINGS:

                        }

Is this the correct way to fix this?

-Ben

Comments

Yu Kuai June 11, 2024, 6:18 a.m. UTC | #1 
Hi,

在 2024/06/11 13:54, Benjamin Marzinski 写道:
> Running the lvm2 testsuite test lvconvert-raid-takeover.sh will
> frequently triggers the following kernel WARNING at
> drivers/md/dm-raid.c:4105:
> 
> WARN_ON_ONCE(test_bit(MD_RECOVERY_RUNNING, &mddev->recovery));
> 
> (obviously since this is a WARN_ON_ONCE, you need to run
> # echo 1 > /sys/kernel/debug/clear_warn_once
> to see it multiple times per boot).
> 
> This issue started during the dmraid-fix-6.9 patchset, although before
> that, this test was frequently hanging instead.
> 
> Here are the kernel messages around the WARNING:
> 
> --------------------------------------------
> 
> [ 3501.753486] device-mapper: raid: Device 0 specified for rebuild;
> clearing sup
> erblock
> [ 3501.754571] device-mapper: raid: Superblocks created for new raid set
> [ 3501.765179] md/raid:mdX: not clean -- starting background
> reconstruction
> [ 3501.765726] md/raid:mdX: device dm-13 operational as raid disk 1
> [ 3501.766190] md/raid:mdX: device dm-15 operational as raid disk 2
> [ 3501.766683] md/raid:mdX: device dm-17 operational as raid disk 3
> [ 3501.767513] md/raid:mdX: raid level 5 active with 3 out of 4 devices,
> algorit
> hm 4
> [ 3501.768105] device-mapper: raid: raid456 discard support disabled due
> to disc
> ard_zeroes_data uncertainty.
> [ 3501.768866] device-mapper: raid: Set
> dm-raid.devices_handle_discard_safely=Y
> to override.
> [ 3501.784007] mdX: bitmap file is out of date, doing full recovery
> [ 3501.793924] md: recovery of RAID array mdX
> [ 3501.799962] md/raid:mdX: not clean -- starting background
> reconstruction
> [ 3501.800524] md/raid:mdX: device dm-13 operational as raid disk 1
> [ 3501.801008] md/raid:mdX: device dm-15 operational as raid disk 2
> [ 3501.801479] md/raid:mdX: device dm-17 operational as raid disk 3
> [ 3501.801800] md: mdX: recovery done.
> [ 3501.802264] md/raid:mdX: raid level 5 active with 3 out of 4 devices,
> algorithm 4
> [ 3501.803087] device-mapper: raid: raid456 discard support disabled due
> to discard_zeroes_data uncertainty.
> [ 3501.803979] device-mapper: raid: Set
> dm-raid.devices_handle_discard_safely=Y to override.
> [ 3501.816712] md: resync of RAID array mdX
> [ 3501.817265] md: mdX: resync interrupted.
> [ 3501.888714] ------------[ cut here ]------------
> RNING: CPU: 0 PID: 4049 at drivers/md/dm-raid.c:4105
> raid_resume+0xee/0x100 [dm_raid]
> [ 3501.893749] Modules linked in: raid1 raid0 brd dm_raid raid456
> async_raid6_recov async_memcpy async_pq async_xor xor async_tx raid6_pq
> nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet
> nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat
> nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set rfkill nf_tables
> nfnetlink intel_rapl_msr intel_rapl_common intel_uncore_frequency_common
> kvm_intel kvm iTCO_wdt iTCO_vendor_support rapl virtio_balloon i2c_i801
> pcspkr i2c_smbus lpc_ich joydev drm fuse xfs libcrc32c ahci libahci
> crct10dif_pclmul virtio_net crc32_pclmul net_failover libata
> crc32c_intel failover ghash_clmulni_intel dimlib virtio_blk
> virtio_console serio_raw dm_mirror dm_region_hash dm_log dm_mod
> [ 3501.903305] CPU: 0 PID: 4049 Comm: lvm Kdump: loaded Not tainted
> 6.10.0-rc2 #1
> [ 3501.904012] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
> 1.16.3-1.fc39 04/01/2014
> [ 3501.904756] RIP: 0010:raid_resume+0xee/0x100 [dm_raid]
> [ 3501.905185] Code: 48 85 69 ff 48 8b b3 80 01 00 00 48 89 c7 e8 a9 aa
> e9 ce 48 8b 83 40 02 00 00 f6 c4 02 0f 85 58 ff ff ff 0f 0b e9 51 ff ff
> ff <0f> 0b e9 59 ff ff ff 66 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90
> [ 3501.906717] RSP: 0018:ff7151910117fc98 EFLAGS: 00010202
> [ 3501.907181] RAX: 0000000000000209 RBX: ff2420d341bd8000 RCX:
> ff7151910117fb60
> [ 3501.907800] RDX: 0000000000010000 RSI: 0000000000000000 RDI:
> ff2420d34a468840
> [ 3501.908520] RBP: ff2420d341bd8058 R08: 0000000000000000 R09:
> ffffffff8fdbcdad
> [ 3501.909227] R10: ff2420d34e5dfa00 R11: 0000000000000200 R12:
> 0000000000000000
> [ 3501.909958] R13: ff2420d35550ec00 R14: ff2420d3f08b9600 R15:
> 0000000000004800
> [ 3501.910612] FS:  00007f1bdc778740(0000) GS:ff2420d4b7800000(0000)
> knlGS:0000000000000000
> [ 3501.911340] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [ 3501.911876] CR2: 000055c2cf0bbcf0 CR3: 000000011545a003 CR4:
> 0000000000771ef0
> [ 3501.912451] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
> 0000000000000000
> [ 3501.913054] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7:
> 0000000000000400
> [ 3501.913661] PKRU: 55555554
> [ 3501.913906] Call Trace:
> [ 3501.914166]  <TASK>
> [ 3501.914381]  ? __warn+0x7f/0x120
> [ 3501.914735]  ? raid_resume+0xee/0x100 [dm_raid]
> [ 3501.915183]  ? report_bug+0x18a/0x1a0
> [ 3501.915549]  ? handle_bug+0x3c/0x70
> [ 3501.915887]  ? exc_invalid_op+0x14/0x70
> [ 3501.916280]  ? asm_exc_invalid_op+0x16/0x20
> [ 3501.916710]  ? super_written+0x2d/0x100
> [ 3501.917111]  ? raid_resume+0xee/0x100 [dm_raid]
> [ 3501.917560]  dm_table_resume_targets+0x80/0xe0 [dm_mod]
> [ 3501.918081]  __dm_resume+0x16/0x70 [dm_mod]
> [ 3501.918466]  dm_resume+0xab/0xc0 [dm_mod]
> [ 3501.918867]  do_resume+0x15d/0x270 [dm_mod]
> [ 3501.919288]  ctl_ioctl+0x203/0x350 [dm_mod]
> [ 3501.919753]  dm_ctl_ioctl+0xa/0x20 [dm_mod]
> [ 3501.920155]  __x64_sys_ioctl+0x8a/0xc0
> [ 3501.920539]  do_syscall_64+0x79/0x150
> [ 3501.920909]  ? clear_bhb_loop+0x25/0x80
> [ 3501.921304]  ? clear_bhb_loop+0x25/0x80
> [ 3501.921669]  ? clear_bhb_loop+0x25/0x80
> [ 3501.922057]  entry_SYSCALL_64_after_hwframe+0x76/0x7e
> [ 3501.922533] RIP: 0033:0x7f1bdc50357b
> [ 3501.922933] Code: ff ff ff 85 c0 79 9b 49 c7 c4 ff ff ff ff 5b 5d 4c
> 89 e0 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa b8 10 00 00 00 0f
> 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 75 68 0f 00 f7 d8 64 89 01 48
> [ 3501.924716] RSP: 002b:00007fffe2d93e88 EFLAGS: 00000206 ORIG_RAX:
> 0000000000000010
> [ 3501.925390] RAX: ffffffffffffffda RBX: 000055c2a50c7660 RCX:
> 00007f1bdc50357b
> [ 3501.926017] RDX: 000055c2ce6b9c90 RSI: 00000000c138fd06 RDI:
> 0000000000000004
> [ 3501.926595] RBP: 000055c2a51751ba R08: 0000000000000000 R09:
> 00000000000f4240
> [ 3501.927164] R10: 0000000000000001 R11: 0000000000000206 R12:
> 000055c2ce6b9d40
> [ 3501.927772] R13: 000055c2a51751ba R14: 000055c2ce6b9c90 R15:
> 000055c2ce6c7720
> [ 3501.928478]  </TASK>
> [ 3501.928728] ---[ end trace 0000000000000000 ]---
> [ 3501.941257] md: recovery of RAID array mdX
> [ 3501.946534] md: mdX: recovery interrupted.
> [ 3502.004627] md: recovery of RAID array mdX
> [ 3502.013666] md: mdX: recovery done.
> 
> -----------------------------------------
> 
> It appears that the issue is that when a dm-raid device table is first
> loaded, raid_ctr() can set MD_RECOVERY_RUNNING through the following
> call chain
> 
> md_run -> raidX_run -> setup_conf -> raidXd -> md_check_recovery
> 
> In md_check_recovery(), MD_RECOVERY_RUNNING can be set here, even though
> MD_RECOVERY_FROZEN is already set:
> 
>                          /*
>                           * Let md_start_sync() to remove and add rdevs
>                           * to the
>                           * array.
>                           */
>                          if (md_spares_need_change(mddev)) {
>                                  set_bit(MD_RECOVERY_RUNNING, &mddev->recovery);
>                                  queue_work(md_misc_wq, &mddev->sync_work);
>                          }
> 
> To verify that this is the cause of the problem, the following naive
> patch stops the kernel WARNINGS:

The WARN is added to check if sync_thread is registered unexpected, and
now the problem is that MD_RECOVERY_RUNNING donesn't mean sync_thread is
registered.
> 
> diff --git a/drivers/md/md.c b/drivers/md/md.c
> index aff9118ff697..9cb4b400318f 100644
> --- a/drivers/md/md.c
> +++ b/drivers/md/md.c
> @@ -9629,7 +9629,8 @@ void md_check_recovery(struct mddev *mddev)
>                           * Let md_start_sync() to remove and add rdevs
>                           * to the
>                           * array.
>                           */
> -                       if (md_spares_need_change(mddev)) {
> +                       if (md_spares_need_change(mddev) &&
> +                           !test_bit(MD_RECOVERY_FROZEN, &mddev->recovery)) {
>                                  set_bit(MD_RECOVERY_RUNNING, &mddev->recovery);
>                                  queue_work(md_misc_wq, &mddev->sync_work);
>                          }
> 
> Is this the correct way to fix this?

Above code is for read-only array to handle spares, while read-only
array can't register sync_thread. I agree that there is no need to set
MD_RECOVERY_RUNNING, however, the behaviour should not be removed.

I'll suggest to fix this WARN by checking if mddev->sync_thread is
registered directly instead of the flag MD_RECOVERY_RUNNING.

Thanks,
Kuai

> 
> -Ben
> 
> .
>
diff mbox series

Patch

diff --git a/drivers/md/md.c b/drivers/md/md.c
index aff9118ff697..9cb4b400318f 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -9629,7 +9629,8 @@  void md_check_recovery(struct mddev *mddev)
                         * Let md_start_sync() to remove and add rdevs
                         * to the
                         * array.
                         */
-                       if (md_spares_need_change(mddev)) {
+                       if (md_spares_need_change(mddev) &&
+                           !test_bit(MD_RECOVERY_FROZEN, &mddev->recovery)) {
                                set_bit(MD_RECOVERY_RUNNING, &mddev->recovery);
                                queue_work(md_misc_wq, &mddev->sync_work);