deleted file mode 100644
@@ -1,20 +0,0 @@
-Amlogic Meson8 and Meson8b "analog top" registers:
---------------------------------------------------
-
-The analog top registers contain information about the so-called
-"metal revision" (which encodes the "minor version") of the SoC.
-
-Required properties:
-- reg: the register range of the analog top registers
-- compatible: depending on the SoC this should be one of:
- - "amlogic,meson8-analog-top"
- - "amlogic,meson8b-analog-top"
- along with "syscon"
-
-
-Example:
-
- analog_top: analog-top@81a8 {
- compatible = "amlogic,meson8-analog-top", "syscon";
- reg = <0x81a8 0x14>;
- };
deleted file mode 100644
@@ -1,17 +0,0 @@
-Amlogic Meson6/Meson8/Meson8b assist registers:
------------------------------------------------
-
-The assist registers contain basic information about the SoC,
-for example the encoded SoC part number.
-
-Required properties:
-- reg: the register range of the assist registers
-- compatible: should be "amlogic,meson-mx-assist" along with "syscon"
-
-
-Example:
-
- assist: assist@7c00 {
- compatible = "amlogic,meson-mx-assist", "syscon";
- reg = <0x7c00 0x200>;
- };
deleted file mode 100644
@@ -1,17 +0,0 @@
-Amlogic Meson6/Meson8/Meson8b bootrom:
---------------------------------------
-
-The bootrom register area can be used to access SoC specific
-information, such as the "misc version".
-
-Required properties:
-- reg: the register range of the bootrom registers
-- compatible: should be "amlogic,meson-mx-bootrom" along with "syscon"
-
-
-Example:
-
- bootrom: bootrom@d9040000 {
- compatible = "amlogic,meson-mx-bootrom", "syscon";
- reg = <0xd9040000 0x10000>;
- };
deleted file mode 100644
@@ -1,18 +0,0 @@
-Amlogic Meson8 and Meson8b power-management-unit:
--------------------------------------------------
-
-The pmu is used to turn off and on different power domains of the SoCs
-This includes the power to the CPU cores.
-
-Required node properties:
-- compatible value : depending on the SoC this should be one of:
- "amlogic,meson8-pmu"
- "amlogic,meson8b-pmu"
-- reg : physical base address and the size of the registers window
-
-Example:
-
- pmu@c81000e4 {
- compatible = "amlogic,meson8b-pmu", "syscon";
- reg = <0xc81000e0 0x18>;
- };
@@ -41,35 +41,6 @@ Examples:
reg = <0xffffe800 0x200>;
};
-RAMC PHY Controller required properties:
-- compatible: Should be "microchip,sama7g5-ddr3phy", "syscon"
-- reg: Should contain registers location and length
-
-Example:
-
- ddr3phy: ddr3phy@e3804000 {
- compatible = "microchip,sama7g5-ddr3phy", "syscon";
- reg = <0xe3804000 0x1000>;
-};
-
-Special Function Registers (SFR)
-
-Special Function Registers (SFR) manage specific aspects of the integrated
-memory, bridge implementations, processor and other functionality not controlled
-elsewhere.
-
-required properties:
-- compatible: Should be "atmel,<chip>-sfr", "syscon" or
- "atmel,<chip>-sfrbu", "syscon"
- <chip> can be "sama5d3", "sama5d4" or "sama5d2".
- It also can be "microchip,sam9x60-sfr", "syscon".
-- reg: Should contain registers location and length
-
- sfr@f0038000 {
- compatible = "atmel,sama5d3-sfr", "syscon";
- reg = <0xf0038000 0x60>;
- };
-
Security Module (SECUMOD)
The Security Module macrocell provides all necessary secure functions to avoid
@@ -7,22 +7,6 @@ ARTPEC-6 ARM SoC
Required root node properties:
- compatible = "axis,artpec6";
-ARTPEC-6 System Controller
---------------------------
-
-The ARTPEC-6 has a system controller with mixed functions controlling DMA, PCIe
-and resets.
-
-Required properties:
-- compatible: "axis,artpec6-syscon", "syscon"
-- reg: Address and length of the register bank.
-
-Example:
- syscon {
- compatible = "axis,artpec6-syscon", "syscon";
- reg = <0xf8000000 0x48>;
- };
-
ARTPEC-6 Development board:
---------------------------
Required root node properties:
@@ -27,16 +27,6 @@ Properties:
- reg : Offset and length of the register set for the device
-* Alpine System-Fabric Service Registers
-
-The System-Fabric Service Registers allow various operation on CPU and
-system fabric, like powering CPUs off.
-
-Properties:
-- compatible : Should contain "al,alpine-sysfabric-service" and "syscon".
-- reg : Offset and length of the register set for the device
-
-
Example:
cpus {
deleted file mode 100644
@@ -1,14 +0,0 @@
-Freescale Vybrid Miscellaneous System Control - CPU Configuration
-
-The MSCM IP contains multiple sub modules, this binding describes the first
-block of registers which contains CPU configuration information.
-
-Required properties:
-- compatible: "fsl,vf610-mscm-cpucfg", "syscon"
-- reg: the register range of the MSCM CPU configuration registers
-
-Example:
- mscm_cpucfg: cpucfg@40001000 {
- compatible = "fsl,vf610-mscm-cpucfg", "syscon";
- reg = <0x40001000 0x800>;
- }
@@ -5,18 +5,3 @@ Boards with a Marvell Dove SoC shall have the following properties:
Required root node property:
- compatible: must contain "marvell,dove";
-
-* Global Configuration registers
-
-Global Configuration registers of Dove SoC are shared by a syscon node.
-
-Required properties:
-- compatible: must contain "marvell,dove-global-config" and "syscon".
-- reg: base address and size of the Global Configuration registers.
-
-Example:
-
-gconf: global-config@e802c {
- compatible = "marvell,dove-global-config", "syscon";
- reg = <0xe802c 0x14>;
-};
deleted file mode 100644
@@ -1,9 +0,0 @@
-SPEAr Misc configuration
-===========================
-SPEAr SOCs have some miscellaneous registers which are used to configure
-few properties of different peripheral controllers.
-
-misc node required properties:
-
-- compatible Should be "st,spear1340-misc", "syscon".
-- reg: Address range of misc space up to 8K
deleted file mode 100644
@@ -1,20 +0,0 @@
-* Device tree bindings for Texas Instruments keystone pll controller
-
-The main pll controller used to drive theC66x CorePacs, the switch fabric,
-and a majority of the peripheral clocks (all but the ARM CorePacs, DDR3 and
-the NETCP modules) requires a PLL Controller to manage the various clock
-divisions, gating, and synchronization.
-
-Required properties:
-
-- compatible: "ti,keystone-pllctrl", "syscon"
-
-- reg: contains offset/length value for pll controller
- registers space.
-
-Example:
-
-pllctrl: pll-controller@02310000 {
- compatible = "ti,keystone-pllctrl", "syscon";
- reg = <0x02310000 0x200>;
-};
@@ -34,36 +34,59 @@ properties:
anyOf:
- items:
- enum:
+ - al,alpine-sysfabric-service
- allwinner,sun8i-a83t-system-controller
- allwinner,sun8i-h3-system-controller
- allwinner,sun8i-v3s-system-controller
- allwinner,sun50i-a64-system-controller
+ - altr,l3regs
- altr,sdr-ctl
- amd,pensando-elba-syscon
+ - amlogic,meson-mx-assist
+ - amlogic,meson-mx-bootrom
+ - amlogic,meson8-analog-top
+ - amlogic,meson8b-analog-top
+ - amlogic,meson8-pmu
+ - amlogic,meson8b-pmu
- apm,xgene-csw
- apm,xgene-efuse
- apm,xgene-mcb
- apm,xgene-rb
- apm,xgene-scu
+ - atmel,sama5d2-sfrbu
+ - atmel,sama5d3-nfc-io
+ - atmel,sama5d3-sfrbu
+ - atmel,sama5d4-sfrbu
+ - axis,artpec6-syscon
- brcm,cru-clkset
- brcm,sr-cdru
- brcm,sr-mhb
+ - cirrus,ep7209-syscon1
+ - cirrus,ep7209-syscon2
+ - cirrus,ep7209-syscon3
+ - cnxt,cx92755-uc
- freecom,fsg-cs2-system-controller
- fsl,imx93-aonmix-ns-syscfg
- fsl,imx93-wakeupmix-syscfg
- fsl,ls1088a-reset
+ - fsl,vf610-anatop
+ - fsl,vf610-mscm-cpucfg
- hisilicon,dsa-subctrl
- hisilicon,hi6220-sramctrl
+ - hisilicon,hip04-ppe
- hisilicon,pcie-sas-subctrl
- hisilicon,peri-subctrl
- hpe,gxp-sysreg
- intel,lgm-syscon
- loongson,ls1b-syscon
- loongson,ls1c-syscon
+ - lsi,axxia-syscon
- marvell,armada-3700-cpu-misc
- marvell,armada-3700-nb-pm
- marvell,armada-3700-avs
- marvell,armada-3700-usb2-host-misc
+ - marvell,dove-global-config
+ - mediatek,mt2701-pctl-a-syscfg
- mediatek,mt2712-pctl-a-syscfg
- mediatek,mt6397-pctl-pmic-syscfg
- mediatek,mt8135-pctl-a-syscfg
@@ -71,7 +94,10 @@ properties:
- mediatek,mt8173-pctl-a-syscfg
- mediatek,mt8365-syscfg
- microchip,lan966x-cpu-syscon
+ - microchip,sam9x60-sfr
+ - microchip,sama7g5-ddr3phy
- microchip,sparx5-cpu-syscon
+ - mscc,ocelot-cpu-syscon
- mstar,msc313-pmsleep
- nuvoton,ma35d1-sys
- nuvoton,wpcm450-shm
@@ -86,6 +112,8 @@ properties:
- rockchip,rk3568-qos
- rockchip,rk3588-qos
- rockchip,rv1126-qos
+ - st,spear1340-misc
+ - stericsson,nomadik-pmu
- starfive,jh7100-sysmain
- ti,am62-usb-phy-ctrl
- ti,am625-dss-oldi-io-ctrl
@@ -93,6 +121,7 @@ properties:
- ti,am654-dss-oldi-io-ctrl
- ti,am654-serdes-ctrl
- ti,j784s4-pcie-ctrl
+ - ti,keystone-pllctrl
- const: syscon
@@ -25,23 +25,6 @@ Example:
reg = <0x71070000 0x1c>;
};
-
-o CPU system control:
-
-The SoC has a few registers (ICPU_CFG:CPU_SYSTEM_CTRL) handling configuration of
-the CPU: 8 general purpose registers, reset control, CPU en/disabling, CPU
-endianness, CPU bus control, CPU status.
-
-Required properties:
-- compatible: Should be "mscc,ocelot-cpu-syscon", "syscon"
-- reg : Should contain registers location and length
-
-Example:
- syscon@70000000 {
- compatible = "mscc,ocelot-cpu-syscon", "syscon";
- reg = <0x70000000 0x2c>;
- };
-
o HSIO regs:
The SoC has a few registers (HSIO) handling miscellaneous functionalities:
@@ -60,15 +60,6 @@ Required properties:
- reg: should contain 2 register ranges. The first one is pointing to the PMECC
block, and the second one to the PMECC_ERRLOC block.
-* SAMA5 NFC I/O bindings:
-
-SAMA5 SoCs embed an advanced NAND controller logic to automate READ/WRITE page
-operations. This interface to this logic is placed in a separate I/O range and
-should thus have its own DT node.
-
-- compatible: should be "atmel,sama5d3-nfc-io", "syscon".
-- reg: should contain the I/O range used to interact with the NFC logic.
-
Example:
nfc_io: nfc-io@70000000 {
@@ -19,16 +19,6 @@ Optional properties:
[1] Documentation/devicetree/bindings/net/ethernet.txt
-* Ethernet ppe node:
-Control rx & tx fifos of all ethernet controllers.
-Have 2048 recv channels shared by all ethernet controllers, only if no overlap.
-Each controller's recv channel start from channel * number (RX_DESC_NUM).
-
-Required properties:
-- compatible: "hisilicon,hip04-ppe", "syscon".
-- reg: address and length of the register set for the device.
-
-
* MDIO bus node:
Required properties: