diff mbox series

[1/4] arm64: dts: ls1012a: Reorder sai dma-names to clean up DTB_CHECK warning

Message ID 20240531215017.1969431-1-Frank.Li@nxp.com (mailing list archive)
State In Next, archived
Headers show
Series [1/4] arm64: dts: ls1012a: Reorder sai dma-names to clean up DTB_CHECK warning | expand

Commit Message

Frank Li May 31, 2024, 9:50 p.m. UTC
Change order of sai's dma-names to clearn up below DTB_CHECK warning.

   arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dtb: sai@2b50000: dma-names:1: 'tx' was expected
   arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dtb: sai@2b60000: dma-names:1: 'tx' was expected

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
 arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

Comments

Shawn Guo June 16, 2024, 6:55 a.m. UTC | #1
On Fri, May 31, 2024 at 05:50:14PM -0400, Frank Li wrote:
> Change order of sai's dma-names to clearn up below DTB_CHECK warning.
> 
>    arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dtb: sai@2b50000: dma-names:1: 'tx' was expected
>    arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dtb: sai@2b60000: dma-names:1: 'tx' was expected
> 
> Signed-off-by: Frank Li <Frank.Li@nxp.com>

Applied all, thanks!
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
index a0f7bbd691a00..454b61fa0e051 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
@@ -449,9 +449,9 @@  QORIQ_CLK_PLL_DIV(4)>,
 				 <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>;
 			clock-names = "bus", "mclk1", "mclk2", "mclk3";
-			dma-names = "tx", "rx";
-			dmas = <&edma0 1 47>,
-			       <&edma0 1 46>;
+			dma-names = "rx", "tx";
+			dmas = <&edma0 1 46>,
+			       <&edma0 1 47>;
 			status = "disabled";
 		};
 
@@ -469,9 +469,9 @@  QORIQ_CLK_PLL_DIV(4)>,
 				 <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(4)>;
 			clock-names = "bus", "mclk1", "mclk2", "mclk3";
-			dma-names = "tx", "rx";
-			dmas = <&edma0 1 45>,
-			       <&edma0 1 44>;
+			dma-names = "rx", "tx";
+			dmas = <&edma0 1 44>,
+			       <&edma0 1 45>;
 			status = "disabled";
 		};