| Message ID | 20240617090518.3237642-1-hildawu@realtek.com (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | 9360c2da682fbf8a26aaca805be4307411f80392 |
| Headers | show |
| Series | [v2] Bluetooth: btusb: Add RTL8852BE device 0489:e125 to device tables | expand |
| Context | Check | Description |
|---|---|---|
| tedd_an/pre-ci_am | success | Success |
| tedd_an/CheckPatch | success | CheckPatch PASS |
| tedd_an/GitLint | success | Gitlint PASS |
| tedd_an/SubjectPrefix | success | Gitlint PASS |
| tedd_an/BuildKernel | success | BuildKernel PASS |
| tedd_an/CheckAllWarning | success | CheckAllWarning PASS |
| tedd_an/CheckSparse | success | CheckSparse PASS |
| tedd_an/CheckSmatch | success | CheckSparse PASS |
| tedd_an/BuildKernel32 | success | BuildKernel32 PASS |
| tedd_an/TestRunnerSetup | success | TestRunnerSetup PASS |
| tedd_an/TestRunner_l2cap-tester | success | TestRunner PASS |
| tedd_an/TestRunner_iso-tester | fail | TestRunner_iso-tester: Total: 122, Passed: 117 (95.9%), Failed: 1, Not Run: 4 |
| tedd_an/TestRunner_bnep-tester | success | TestRunner PASS |
| tedd_an/TestRunner_mgmt-tester | success | TestRunner PASS |
| tedd_an/TestRunner_rfcomm-tester | success | TestRunner PASS |
| tedd_an/TestRunner_sco-tester | success | TestRunner PASS |
| tedd_an/TestRunner_ioctl-tester | success | TestRunner PASS |
| tedd_an/TestRunner_mesh-tester | success | TestRunner PASS |
| tedd_an/TestRunner_smp-tester | success | TestRunner PASS |
| tedd_an/TestRunner_userchan-tester | success | TestRunner PASS |
| tedd_an/IncrementalBuild | success | Incremental Build PASS |
This is automated email and please do not reply to this email! Dear submitter, Thank you for submitting the patches to the linux bluetooth mailing list. This is a CI test results with your patch series: PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=862524 ---Test result--- Test Summary: CheckPatch PASS 0.61 seconds GitLint PASS 0.29 seconds SubjectPrefix PASS 0.10 seconds BuildKernel PASS 31.09 seconds CheckAllWarning PASS 34.06 seconds CheckSparse PASS 38.41 seconds CheckSmatch PASS 104.50 seconds BuildKernel32 PASS 29.45 seconds TestRunnerSetup PASS 533.21 seconds TestRunner_l2cap-tester PASS 18.54 seconds TestRunner_iso-tester FAIL 36.97 seconds TestRunner_bnep-tester PASS 4.87 seconds TestRunner_mgmt-tester PASS 109.15 seconds TestRunner_rfcomm-tester PASS 7.54 seconds TestRunner_sco-tester PASS 15.16 seconds TestRunner_ioctl-tester PASS 7.95 seconds TestRunner_mesh-tester PASS 6.05 seconds TestRunner_smp-tester PASS 6.97 seconds TestRunner_userchan-tester PASS 5.14 seconds IncrementalBuild PASS 28.27 seconds Details ############################## Test: TestRunner_iso-tester - FAIL Desc: Run iso-tester with test-runner Output: Total: 122, Passed: 117 (95.9%), Failed: 1, Not Run: 4 Failed Test Cases ISO Connect2 Suspend - Success Failed 4.231 seconds --- Regards, Linux Bluetooth
Dear Hilda, Thank you for the improved version. Am 17.06.24 um 11:05 schrieb Hilda Wu: > Add the support ID 0489:e125 to usb_device_id table for > Realtek RTL8852B chip. > > The device info from /sys/kernel/debug/usb/devices as below. > > T: Bus=01 Lev=01 Prnt=01 Port=07 Cnt=03 Dev#= 5 Spd=12 MxCh= 0 > D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 > P: Vendor=0489 ProdID=e125 Rev= 0.00 > S: Manufacturer=Realtek > S: Product=Bluetooth Radio > S: SerialNumber=00e04c000001 > C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA > I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms > E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms > E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms > I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms > E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms > I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms > E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms > I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms > E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms > I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms > E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms > I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms > E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms > > Signed-off-by: Hilda Wu <hildawu@realtek.com> > > --- > Change in v2: > - Add suitable spaces to commit log. > --- > --- > drivers/bluetooth/btusb.c | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c > index 79aefdb3324d..2d7d47f9d007 100644 > --- a/drivers/bluetooth/btusb.c > +++ b/drivers/bluetooth/btusb.c > @@ -555,6 +555,8 @@ static const struct usb_device_id quirks_table[] = { > BTUSB_WIDEBAND_SPEECH }, > { USB_DEVICE(0x13d3, 0x3572), .driver_info = BTUSB_REALTEK | > BTUSB_WIDEBAND_SPEECH }, > + { USB_DEVICE(0x0489, 0xe125), .driver_info = BTUSB_REALTEK | > + BTUSB_WIDEBAND_SPEECH }, > Did you overlook my comment regarding the sorting? > /* Realtek 8852BT/8852BE-VT Bluetooth devices */ > { USB_DEVICE(0x0bda, 0x8520), .driver_info = BTUSB_REALTEK | Kind regards, Paul
Hello: This patch was applied to bluetooth/bluetooth-next.git (master) by Luiz Augusto von Dentz <luiz.von.dentz@intel.com>: On Mon, 17 Jun 2024 17:05:18 +0800 you wrote: > Add the support ID 0489:e125 to usb_device_id table for > Realtek RTL8852B chip. > > The device info from /sys/kernel/debug/usb/devices as below. > > T: Bus=01 Lev=01 Prnt=01 Port=07 Cnt=03 Dev#= 5 Spd=12 MxCh= 0 > D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 > P: Vendor=0489 ProdID=e125 Rev= 0.00 > S: Manufacturer=Realtek > S: Product=Bluetooth Radio > S: SerialNumber=00e04c000001 > C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA > I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms > E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms > E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms > I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms > E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms > I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms > E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms > I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms > E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms > I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms > E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms > I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms > E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms > > [...] Here is the summary with links: - [v2] Bluetooth: btusb: Add RTL8852BE device 0489:e125 to device tables https://git.kernel.org/bluetooth/bluetooth-next/c/9360c2da682f You are awesome, thank you!
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 79aefdb3324d..2d7d47f9d007 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -555,6 +555,8 @@ static const struct usb_device_id quirks_table[] = { BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x13d3, 0x3572), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x0489, 0xe125), .driver_info = BTUSB_REALTEK | + BTUSB_WIDEBAND_SPEECH }, /* Realtek 8852BT/8852BE-VT Bluetooth devices */ { USB_DEVICE(0x0bda, 0x8520), .driver_info = BTUSB_REALTEK |
Add the support ID 0489:e125 to usb_device_id table for Realtek RTL8852B chip. The device info from /sys/kernel/debug/usb/devices as below. T: Bus=01 Lev=01 Prnt=01 Port=07 Cnt=03 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e125 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Hilda Wu <hildawu@realtek.com> --- Change in v2: - Add suitable spaces to commit log. --- --- drivers/bluetooth/btusb.c | 2 ++ 1 file changed, 2 insertions(+)