diff mbox series

[v2,3/5] arm64: dts: rockchip: Add HDMI & VOP2 to Khadas Edge 2

Message ID 20240617071112.3133101-4-jacobe.zang@wesion.com (mailing list archive)
State New
Headers show
Series arm64: dts: Add board support for Khadas Edge2 | expand

Commit Message

Jacobe Zang June 17, 2024, 7:11 a.m. UTC
Add the HDMI, VP, VOP nodes which HDMI function needs.

Signed-off-by: Jacobe Zang <jacobe.zang@wesion.com>
---
 .../dts/rockchip/rk3588s-khadas-edge2.dts     | 36 +++++++++++++++++++
 1 file changed, 36 insertions(+)

Comments

Heiko Stübner June 17, 2024, 8:27 p.m. UTC | #1
Am Montag, 17. Juni 2024, 09:11:10 CEST schrieb Jacobe Zang:
> Add the HDMI, VP, VOP nodes which HDMI function needs.
> 
> Signed-off-by: Jacobe Zang <jacobe.zang@wesion.com>

The rk3588's hdmi controller was just posted in a v1 and from
comments received it looks like it'll still take a bit of time before
that is ready to land. So this patch would also be for later.


Heiko
Jacobe Zang June 18, 2024, 2:46 a.m. UTC | #2
Hi Heiko,

> The rk3588's hdmi controller was just posted in a v1 and from
> comments received it looks like it'll still take a bit of time before
> that is ready to land.

All right. I will recommit after the posted patch was merged by mainline. By the way, could you provide information on the specific patch or share a link to it?

---
Best Regards
Jacobe
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts b/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts
index a82f10312eacd..233bab17bffd2 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts
@@ -7,6 +7,7 @@ 
 #include <dt-bindings/pinctrl/rockchip.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/usb/pd.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
 #include "rk3588s.dtsi"
 
 / {
@@ -827,6 +828,7 @@  usbdp_phy0_dp_altmode_mux: endpoint@1 {
 };
 
 &usb_host0_xhci {
+	dr-mode = "otg";
 	usb-role-switch;
 	status = "okay";
 
@@ -851,3 +853,37 @@  &usb_host1_ohci {
 &usb_host2_xhci {
 	status = "okay";
 };
+
+&hdmi0 {
+	status = "okay";
+};
+
+&hdptxphy_hdmi0 {
+	status = "okay";
+};
+
+&display_subsystem {
+	clocks = <&hdptxphy_hdmi0>;
+	clock-names = "hdmi0_phy_pll";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&hdmi0_in {
+	hdmi0_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi0>;
+	};
+};
+
+&vop {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi0_in_vp0>;
+	};
+};