new file mode 100644
@@ -0,0 +1,331 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _LINUX_PRCTL_H
+#define _LINUX_PRCTL_H
+
+#include <linux/types.h>
+
+/* Values to pass as first argument to prctl() */
+
+#define PR_SET_PDEATHSIG 1 /* Second arg is a signal */
+#define PR_GET_PDEATHSIG 2 /* Second arg is a ptr to return the signal */
+
+/* Get/set current->mm->dumpable */
+#define PR_GET_DUMPABLE 3
+#define PR_SET_DUMPABLE 4
+
+/* Get/set unaligned access control bits (if meaningful) */
+#define PR_GET_UNALIGN 5
+#define PR_SET_UNALIGN 6
+# define PR_UNALIGN_NOPRINT 1 /* silently fix up unaligned user accesses */
+# define PR_UNALIGN_SIGBUS 2 /* generate SIGBUS on unaligned user access */
+
+/* Get/set whether or not to drop capabilities on setuid() away from
+ * uid 0 (as per security/commoncap.c) */
+#define PR_GET_KEEPCAPS 7
+#define PR_SET_KEEPCAPS 8
+
+/* Get/set floating-point emulation control bits (if meaningful) */
+#define PR_GET_FPEMU 9
+#define PR_SET_FPEMU 10
+# define PR_FPEMU_NOPRINT 1 /* silently emulate fp operations accesses */
+# define PR_FPEMU_SIGFPE 2 /* don't emulate fp operations, send SIGFPE instead */
+
+/* Get/set floating-point exception mode (if meaningful) */
+#define PR_GET_FPEXC 11
+#define PR_SET_FPEXC 12
+# define PR_FP_EXC_SW_ENABLE 0x80 /* Use FPEXC for FP exception enables */
+# define PR_FP_EXC_DIV 0x010000 /* floating point divide by zero */
+# define PR_FP_EXC_OVF 0x020000 /* floating point overflow */
+# define PR_FP_EXC_UND 0x040000 /* floating point underflow */
+# define PR_FP_EXC_RES 0x080000 /* floating point inexact result */
+# define PR_FP_EXC_INV 0x100000 /* floating point invalid operation */
+# define PR_FP_EXC_DISABLED 0 /* FP exceptions disabled */
+# define PR_FP_EXC_NONRECOV 1 /* async non-recoverable exc. mode */
+# define PR_FP_EXC_ASYNC 2 /* async recoverable exception mode */
+# define PR_FP_EXC_PRECISE 3 /* precise exception mode */
+
+/* Get/set whether we use statistical process timing or accurate timestamp
+ * based process timing */
+#define PR_GET_TIMING 13
+#define PR_SET_TIMING 14
+# define PR_TIMING_STATISTICAL 0 /* Normal, traditional,
+ statistical process timing */
+# define PR_TIMING_TIMESTAMP 1 /* Accurate timestamp based
+ process timing */
+
+#define PR_SET_NAME 15 /* Set process name */
+#define PR_GET_NAME 16 /* Get process name */
+
+/* Get/set process endian */
+#define PR_GET_ENDIAN 19
+#define PR_SET_ENDIAN 20
+# define PR_ENDIAN_BIG 0
+# define PR_ENDIAN_LITTLE 1 /* True little endian mode */
+# define PR_ENDIAN_PPC_LITTLE 2 /* "PowerPC" pseudo little endian */
+
+/* Get/set process seccomp mode */
+#define PR_GET_SECCOMP 21
+#define PR_SET_SECCOMP 22
+
+/* Get/set the capability bounding set (as per security/commoncap.c) */
+#define PR_CAPBSET_READ 23
+#define PR_CAPBSET_DROP 24
+
+/* Get/set the process' ability to use the timestamp counter instruction */
+#define PR_GET_TSC 25
+#define PR_SET_TSC 26
+# define PR_TSC_ENABLE 1 /* allow the use of the timestamp counter */
+# define PR_TSC_SIGSEGV 2 /* throw a SIGSEGV instead of reading the TSC */
+
+/* Get/set securebits (as per security/commoncap.c) */
+#define PR_GET_SECUREBITS 27
+#define PR_SET_SECUREBITS 28
+
+/*
+ * Get/set the timerslack as used by poll/select/nanosleep
+ * A value of 0 means "use default"
+ */
+#define PR_SET_TIMERSLACK 29
+#define PR_GET_TIMERSLACK 30
+
+#define PR_TASK_PERF_EVENTS_DISABLE 31
+#define PR_TASK_PERF_EVENTS_ENABLE 32
+
+/*
+ * Set early/late kill mode for hwpoison memory corruption.
+ * This influences when the process gets killed on a memory corruption.
+ */
+#define PR_MCE_KILL 33
+# define PR_MCE_KILL_CLEAR 0
+# define PR_MCE_KILL_SET 1
+
+# define PR_MCE_KILL_LATE 0
+# define PR_MCE_KILL_EARLY 1
+# define PR_MCE_KILL_DEFAULT 2
+
+#define PR_MCE_KILL_GET 34
+
+/*
+ * Tune up process memory map specifics.
+ */
+#define PR_SET_MM 35
+# define PR_SET_MM_START_CODE 1
+# define PR_SET_MM_END_CODE 2
+# define PR_SET_MM_START_DATA 3
+# define PR_SET_MM_END_DATA 4
+# define PR_SET_MM_START_STACK 5
+# define PR_SET_MM_START_BRK 6
+# define PR_SET_MM_BRK 7
+# define PR_SET_MM_ARG_START 8
+# define PR_SET_MM_ARG_END 9
+# define PR_SET_MM_ENV_START 10
+# define PR_SET_MM_ENV_END 11
+# define PR_SET_MM_AUXV 12
+# define PR_SET_MM_EXE_FILE 13
+# define PR_SET_MM_MAP 14
+# define PR_SET_MM_MAP_SIZE 15
+
+/*
+ * This structure provides new memory descriptor
+ * map which mostly modifies /proc/pid/stat[m]
+ * output for a task. This mostly done in a
+ * sake of checkpoint/restore functionality.
+ */
+struct prctl_mm_map {
+ __u64 start_code; /* code section bounds */
+ __u64 end_code;
+ __u64 start_data; /* data section bounds */
+ __u64 end_data;
+ __u64 start_brk; /* heap for brk() syscall */
+ __u64 brk;
+ __u64 start_stack; /* stack starts at */
+ __u64 arg_start; /* command line arguments bounds */
+ __u64 arg_end;
+ __u64 env_start; /* environment variables bounds */
+ __u64 env_end;
+ __u64 *auxv; /* auxiliary vector */
+ __u32 auxv_size; /* vector size */
+ __u32 exe_fd; /* /proc/$pid/exe link file */
+};
+
+/*
+ * Set specific pid that is allowed to ptrace the current task.
+ * A value of 0 mean "no process".
+ */
+#define PR_SET_PTRACER 0x59616d61
+# define PR_SET_PTRACER_ANY ((unsigned long)-1)
+
+#define PR_SET_CHILD_SUBREAPER 36
+#define PR_GET_CHILD_SUBREAPER 37
+
+/*
+ * If no_new_privs is set, then operations that grant new privileges (i.e.
+ * execve) will either fail or not grant them. This affects suid/sgid,
+ * file capabilities, and LSMs.
+ *
+ * Operations that merely manipulate or drop existing privileges (setresuid,
+ * capset, etc.) will still work. Drop those privileges if you want them gone.
+ *
+ * Changing LSM security domain is considered a new privilege. So, for example,
+ * asking selinux for a specific new context (e.g. with runcon) will result
+ * in execve returning -EPERM.
+ *
+ * See Documentation/userspace-api/no_new_privs.rst for more details.
+ */
+#define PR_SET_NO_NEW_PRIVS 38
+#define PR_GET_NO_NEW_PRIVS 39
+
+#define PR_GET_TID_ADDRESS 40
+
+#define PR_SET_THP_DISABLE 41
+#define PR_GET_THP_DISABLE 42
+
+/*
+ * No longer implemented, but left here to ensure the numbers stay reserved:
+ */
+#define PR_MPX_ENABLE_MANAGEMENT 43
+#define PR_MPX_DISABLE_MANAGEMENT 44
+
+#define PR_SET_FP_MODE 45
+#define PR_GET_FP_MODE 46
+# define PR_FP_MODE_FR (1 << 0) /* 64b FP registers */
+# define PR_FP_MODE_FRE (1 << 1) /* 32b compatibility */
+
+/* Control the ambient capability set */
+#define PR_CAP_AMBIENT 47
+# define PR_CAP_AMBIENT_IS_SET 1
+# define PR_CAP_AMBIENT_RAISE 2
+# define PR_CAP_AMBIENT_LOWER 3
+# define PR_CAP_AMBIENT_CLEAR_ALL 4
+
+/* arm64 Scalable Vector Extension controls */
+/* Flag values must be kept in sync with ptrace NT_ARM_SVE interface */
+#define PR_SVE_SET_VL 50 /* set task vector length */
+# define PR_SVE_SET_VL_ONEXEC (1 << 18) /* defer effect until exec */
+#define PR_SVE_GET_VL 51 /* get task vector length */
+/* Bits common to PR_SVE_SET_VL and PR_SVE_GET_VL */
+# define PR_SVE_VL_LEN_MASK 0xffff
+# define PR_SVE_VL_INHERIT (1 << 17) /* inherit across exec */
+
+/* Per task speculation control */
+#define PR_GET_SPECULATION_CTRL 52
+#define PR_SET_SPECULATION_CTRL 53
+/* Speculation control variants */
+# define PR_SPEC_STORE_BYPASS 0
+# define PR_SPEC_INDIRECT_BRANCH 1
+# define PR_SPEC_L1D_FLUSH 2
+/* Return and control values for PR_SET/GET_SPECULATION_CTRL */
+# define PR_SPEC_NOT_AFFECTED 0
+# define PR_SPEC_PRCTL (1UL << 0)
+# define PR_SPEC_ENABLE (1UL << 1)
+# define PR_SPEC_DISABLE (1UL << 2)
+# define PR_SPEC_FORCE_DISABLE (1UL << 3)
+# define PR_SPEC_DISABLE_NOEXEC (1UL << 4)
+
+/* Reset arm64 pointer authentication keys */
+#define PR_PAC_RESET_KEYS 54
+# define PR_PAC_APIAKEY (1UL << 0)
+# define PR_PAC_APIBKEY (1UL << 1)
+# define PR_PAC_APDAKEY (1UL << 2)
+# define PR_PAC_APDBKEY (1UL << 3)
+# define PR_PAC_APGAKEY (1UL << 4)
+
+/* Tagged user address controls for arm64 */
+#define PR_SET_TAGGED_ADDR_CTRL 55
+#define PR_GET_TAGGED_ADDR_CTRL 56
+# define PR_TAGGED_ADDR_ENABLE (1UL << 0)
+/* MTE tag check fault modes */
+# define PR_MTE_TCF_NONE 0UL
+# define PR_MTE_TCF_SYNC (1UL << 1)
+# define PR_MTE_TCF_ASYNC (1UL << 2)
+# define PR_MTE_TCF_MASK (PR_MTE_TCF_SYNC | PR_MTE_TCF_ASYNC)
+/* MTE tag inclusion mask */
+# define PR_MTE_TAG_SHIFT 3
+# define PR_MTE_TAG_MASK (0xffffUL << PR_MTE_TAG_SHIFT)
+/* Unused; kept only for source compatibility */
+# define PR_MTE_TCF_SHIFT 1
+
+/* Control reclaim behavior when allocating memory */
+#define PR_SET_IO_FLUSHER 57
+#define PR_GET_IO_FLUSHER 58
+
+/* Dispatch syscalls to a userspace handler */
+#define PR_SET_SYSCALL_USER_DISPATCH 59
+# define PR_SYS_DISPATCH_OFF 0
+# define PR_SYS_DISPATCH_ON 1
+/* The control values for the user space selector when dispatch is enabled */
+# define SYSCALL_DISPATCH_FILTER_ALLOW 0
+# define SYSCALL_DISPATCH_FILTER_BLOCK 1
+
+/* Set/get enabled arm64 pointer authentication keys */
+#define PR_PAC_SET_ENABLED_KEYS 60
+#define PR_PAC_GET_ENABLED_KEYS 61
+
+/* Request the scheduler to share a core */
+#define PR_SCHED_CORE 62
+# define PR_SCHED_CORE_GET 0
+# define PR_SCHED_CORE_CREATE 1 /* create unique core_sched cookie */
+# define PR_SCHED_CORE_SHARE_TO 2 /* push core_sched cookie to pid */
+# define PR_SCHED_CORE_SHARE_FROM 3 /* pull core_sched cookie to pid */
+# define PR_SCHED_CORE_MAX 4
+# define PR_SCHED_CORE_SCOPE_THREAD 0
+# define PR_SCHED_CORE_SCOPE_THREAD_GROUP 1
+# define PR_SCHED_CORE_SCOPE_PROCESS_GROUP 2
+
+/* arm64 Scalable Matrix Extension controls */
+/* Flag values must be in sync with SVE versions */
+#define PR_SME_SET_VL 63 /* set task vector length */
+# define PR_SME_SET_VL_ONEXEC (1 << 18) /* defer effect until exec */
+#define PR_SME_GET_VL 64 /* get task vector length */
+/* Bits common to PR_SME_SET_VL and PR_SME_GET_VL */
+# define PR_SME_VL_LEN_MASK 0xffff
+# define PR_SME_VL_INHERIT (1 << 17) /* inherit across exec */
+
+/* Memory deny write / execute */
+#define PR_SET_MDWE 65
+# define PR_MDWE_REFUSE_EXEC_GAIN (1UL << 0)
+# define PR_MDWE_NO_INHERIT (1UL << 1)
+
+#define PR_GET_MDWE 66
+
+#define PR_SET_VMA 0x53564d41
+# define PR_SET_VMA_ANON_NAME 0
+
+#define PR_GET_AUXV 0x41555856
+
+#define PR_SET_MEMORY_MERGE 67
+#define PR_GET_MEMORY_MERGE 68
+
+#define PR_RISCV_V_SET_CONTROL 69
+#define PR_RISCV_V_GET_CONTROL 70
+# define PR_RISCV_V_VSTATE_CTRL_DEFAULT 0
+# define PR_RISCV_V_VSTATE_CTRL_OFF 1
+# define PR_RISCV_V_VSTATE_CTRL_ON 2
+# define PR_RISCV_V_VSTATE_CTRL_INHERIT (1 << 4)
+# define PR_RISCV_V_VSTATE_CTRL_CUR_MASK 0x3
+# define PR_RISCV_V_VSTATE_CTRL_NEXT_MASK 0xc
+# define PR_RISCV_V_VSTATE_CTRL_MASK 0x1f
+
+#define PR_RISCV_SET_ICACHE_FLUSH_CTX 71
+# define PR_RISCV_CTX_SW_FENCEI_ON 0
+# define PR_RISCV_CTX_SW_FENCEI_OFF 1
+# define PR_RISCV_SCOPE_PER_PROCESS 0
+# define PR_RISCV_SCOPE_PER_THREAD 1
+
+/* PowerPC Dynamic Execution Control Register (DEXCR) controls */
+#define PR_PPC_GET_DEXCR 72
+#define PR_PPC_SET_DEXCR 73
+/* DEXCR aspect to act on */
+# define PR_PPC_DEXCR_SBHE 0 /* Speculative branch hint enable */
+# define PR_PPC_DEXCR_IBRTPD 1 /* Indirect branch recurrent target prediction disable */
+# define PR_PPC_DEXCR_SRAPD 2 /* Subroutine return address prediction disable */
+# define PR_PPC_DEXCR_NPHIE 3 /* Non-privileged hash instruction enable */
+/* Action to apply / return */
+# define PR_PPC_DEXCR_CTRL_EDITABLE 0x1 /* Aspect can be modified with PR_PPC_SET_DEXCR */
+# define PR_PPC_DEXCR_CTRL_SET 0x2 /* Set the aspect for this process */
+# define PR_PPC_DEXCR_CTRL_CLEAR 0x4 /* Clear the aspect for this process */
+# define PR_PPC_DEXCR_CTRL_SET_ONEXEC 0x8 /* Set the aspect on exec */
+# define PR_PPC_DEXCR_CTRL_CLEAR_ONEXEC 0x10 /* Clear the aspect on exec */
+# define PR_PPC_DEXCR_CTRL_MASK 0x1f
+
+#endif /* _LINUX_PRCTL_H */
On Ubuntu 23.04, the kvm and mdwe selftests/mm build fails due to missing a few items that are found in prctl.h. Here is an excerpt of the build failures: ksm_tests.c:252:13: error: use of undeclared identifier 'PR_SET_MEMORY_MERGE' ... mdwe_test.c:26:18: error: use of undeclared identifier 'PR_SET_MDWE' mdwe_test.c:38:18: error: use of undeclared identifier 'PR_GET_MDWE' Fix these errors by adding a new tools/include/uapi/linux/prctl.h . This file was created by running "make headers", and then copying a snapshot over from ./usr/include/linux/prctl.h, as per the approach we settled on in [1]. [1] commit e076eaca5906 ("selftests: break the dependency upon local header files") Cc: David Hildenbrand <david@redhat.com> Signed-off-by: John Hubbard <jhubbard@nvidia.com> --- tools/include/uapi/linux/prctl.h | 331 +++++++++++++++++++++++++++++++ 1 file changed, 331 insertions(+) create mode 100644 tools/include/uapi/linux/prctl.h