| Message ID | 20240618064443.6474-2-ivan.klokov@syntacore.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Support RISC-V CSR read/write in Qtest environment | expand |
On 18/06/2024 08.44, Ivan Klokov wrote: > The RISC-V architecture supports the creation of custom > CSR-mapped devices. It would be convenient to test them in the same way > as MMIO-mapped devices. To do this, a new call has been added > to read/write CSR registers. > > Signed-off-by: Ivan Klokov <ivan.klokov@syntacore.com> > --- ... > diff --git a/target/riscv/csr.c b/target/riscv/csr.c > index 58ef7079dc..82540ae5dc 100644 > --- a/target/riscv/csr.c > +++ b/target/riscv/csr.c > @@ -29,7 +29,7 @@ > #include "sysemu/cpu-timers.h" > #include "qemu/guest-random.h" > #include "qapi/error.h" > - > +#include "tests/qtest/libqtest.h" > > /* CSR function table public API */ > void riscv_get_csr_ops(int csrno, riscv_csr_operations *ops) > @@ -4549,6 +4549,53 @@ static RISCVException write_jvt(CPURISCVState *env, int csrno, > return RISCV_EXCP_NONE; > } > > +static uint64_t csr_call(char *cmd, uint64_t cpu_num, int csrno, > + uint64_t *val) > +{ > + RISCVCPU *cpu = RISCV_CPU(cpu_by_arch_id(cpu_num)); > + CPURISCVState *env = &cpu->env; > + > + int ret = RISCV_EXCP_NONE; > + if (strcmp(cmd, "get_csr") == 0) { > + ret = riscv_csrrw(env, csrno, (target_ulong *)val, 0, 0); > + > + } else if (strcmp(cmd, "set_csr") == 0) { > + ret = riscv_csrrw(env, csrno, NULL, *(target_ulong *)val, MAKE_64BIT_MASK(0, TARGET_LONG_BITS)); > + } > + > + if (ret == RISCV_EXCP_NONE) { > + ret = 0; > + } Is there a reason for ignoring errors here? If not, I'd rather replace that final if-statement with: else { g_assert_not_reached(); } to make sure that mistakes in setting the right sub-command don't get ignored without any error message. > + return ret; > +} > + > +bool csr_qtest_callback(CharBackend *chr, gchar **words) > +{ > + if (strcmp(words[0], "csr") == 0) { > + > + uint64_t res, cpu; > + > + uint64_t val; > + int rc, csr; > + > + rc = qemu_strtou64(words[2], NULL, 0, &cpu); > + g_assert(rc == 0); > + rc = qemu_strtoi(words[3], NULL, 0, &csr); > + g_assert(rc == 0); > + rc = qemu_strtou64(words[4], NULL, 0, &val); > + g_assert(rc == 0); > + res = csr_call(words[1], cpu, csr, &val); > + > + qtest_send_prefix(chr); > + qtest_sendf(chr, "OK %"PRIx64" "TARGET_FMT_lx"\n", res, (target_ulong)val); > + > + return true; > + } > + > + return false; > +} > + > /* > * Control and Status Register function table > * riscv_csr_operations::predicate() must be provided for an implemented CSR > diff --git a/tests/qtest/libqos/csr.c b/tests/qtest/libqos/csr.c > new file mode 100644 > index 0000000000..2dc52fc442 > --- /dev/null > +++ b/tests/qtest/libqos/csr.c > @@ -0,0 +1,42 @@ > +/* > + * QTest RISC-V CSR driver > + * > + * Copyright (c) 2024 Syntacore > + * > + * This work is licensed under the terms of the GNU GPL, version 2 or later. > + * See the COPYING file in the top-level directory. > + */ > + > +#include "qemu/osdep.h" > +#include "../libqtest.h" > +#include "csr.h" > + > +static uint64_t qcsr_call(QTestState *qts, const char *name, uint64_t cpu, > + int csrno, uint64_t *val) > +{ > + uint64_t res = 0; > + > + res = qtest_csr_call(qts, name, cpu, csrno, val); > + > + return res; > +} > + > +int qcsr_get_csr(QTestState *qts, uint64_t cpu, > + int csrno, uint64_t *val) > +{ > + int res; > + > + res = qcsr_call(qts, "get_csr", cpu, csrno, val); > + > + return res; > +} > + > +int qcsr_set_csr(QTestState *qts, uint64_t cpu, > + int csrno, uint64_t *val) > +{ > + int res; > + > + res = qcsr_call(qts, "set_csr", cpu, csrno, val); > + > + return res; > +} Technically, there does not seem to be anything related to libqos in your patch set. libqos is a framework for executing tests on various buses, e.g. to test PCI devices on various host PCI bus implementations. All that is triggered via qos-test.c. Your CSR test does not seem to fit into that catogory, so please put that code rather directly in your riscv-csr-test.c file instead. (unless you want to use it in a lot of other tests in the future, too, then maybe you could move them as static inlines into the csr.h header instead). > diff --git a/tests/qtest/libqos/csr.h b/tests/qtest/libqos/csr.h > new file mode 100644 > index 0000000000..d953735fe8 > --- /dev/null > +++ b/tests/qtest/libqos/csr.h Again, not related to libqos, please move it up to the qtest folder itself. > @@ -0,0 +1,16 @@ > +/* > + * This work is licensed under the terms of the GNU GPL, version 2 or later. > + * See the COPYING file in the top-level directory. > + */ > + > +#ifndef LIBQOS_CSR_H > +#define LIBQOS_CSR_H > + > +int qcsr_get_csr(QTestState *qts, uint64_t cpu, > + int csrno, uint64_t *val); > + > +int qcsr_set_csr(QTestState *qts, uint64_t cpu, > + int csrno, uint64_t *val); > + > + > +#endif /* LIBQOS_CSR_H */ > diff --git a/tests/qtest/libqos/meson.build b/tests/qtest/libqos/meson.build > index 558eb4c24b..a944febbd8 100644 > --- a/tests/qtest/libqos/meson.build > +++ b/tests/qtest/libqos/meson.build > @@ -25,6 +25,9 @@ libqos_srcs = files( > # usb > 'usb.c', > > + #riscv csr > + 'csr.c', > + > # qgraph devices: > 'e1000e.c', > 'i2c.c', > diff --git a/tests/qtest/libqtest.c b/tests/qtest/libqtest.c > index 18e2f7f282..4667d8d873 100644 > --- a/tests/qtest/libqtest.c > +++ b/tests/qtest/libqtest.c > @@ -1200,6 +1200,33 @@ uint64_t qtest_rtas_call(QTestState *s, const char *name, > return 0; > } > > +static void qtest_rsp_csr(QTestState *s, uint64_t *val) > +{ > + gchar **args; > + uint64_t ret; > + int rc; > + > + args = qtest_rsp_args(s, 3); > + > + rc = qemu_strtou64(args[1], NULL, 16, &ret); > + g_assert(rc == 0); > + rc = qemu_strtou64(args[2], NULL, 16, val); > + g_assert(rc == 0); > + > + g_strfreev(args); > +} > + > +uint64_t qtest_csr_call(QTestState *s, const char *name, > + uint64_t cpu, int csr, > + uint64_t *val) > +{ > + qtest_sendf(s, "csr %s 0x%"PRIx64" %d 0x%"PRIx64"\n", > + name, cpu, csr, *val); > + > + qtest_rsp_csr(s, val); Just a matter of taste, but I think I'd rather inline the contents of qtest_rsp_csr() here since both functions are not very big yet. (unless you need qtest_rsp_csr() in another function later, then it's of course better to keep it separate) > + return 0; > +} Thomas
diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index 69a08e8c2c..f1df0f4de0 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -1149,6 +1149,16 @@ void riscv_cpu_finalize_features(RISCVCPU *cpu, Error **errp) } } +static void riscv_cpu_register_csr_qtest_callback(void) +{ + static gsize reinit_done; + if (g_once_init_enter(&reinit_done)) { + qtest_set_command_cb(csr_qtest_callback); + + g_once_init_leave(&reinit_done, 1); + } +} + static void riscv_cpu_realize(DeviceState *dev, Error **errp) { CPUState *cs = CPU(dev); @@ -1175,6 +1185,9 @@ static void riscv_cpu_realize(DeviceState *dev, Error **errp) riscv_cpu_register_gdb_regs_for_features(cs); + /* register callback for csr qtests */ + riscv_cpu_register_csr_qtest_callback(); + #ifndef CONFIG_USER_ONLY if (cpu->cfg.debug) { riscv_trigger_realize(&cpu->env); diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h index 6fe0d712b4..6d4bbec53c 100644 --- a/target/riscv/cpu.h +++ b/target/riscv/cpu.h @@ -32,6 +32,8 @@ #include "cpu_cfg.h" #include "qapi/qapi-types-common.h" #include "cpu-qom.h" +#include "qemu/cutils.h" +#include "sysemu/qtest.h" typedef struct CPUArchState CPURISCVState; @@ -813,6 +815,7 @@ bool riscv_cpu_accelerator_compatible(RISCVCPU *cpu); /* CSR function table */ extern riscv_csr_operations csr_ops[CSR_TABLE_SIZE]; +bool csr_qtest_callback(CharBackend *chr, gchar **words); extern const bool valid_vm_1_10_32[], valid_vm_1_10_64[]; diff --git a/target/riscv/csr.c b/target/riscv/csr.c index 58ef7079dc..82540ae5dc 100644 --- a/target/riscv/csr.c +++ b/target/riscv/csr.c @@ -29,7 +29,7 @@ #include "sysemu/cpu-timers.h" #include "qemu/guest-random.h" #include "qapi/error.h" - +#include "tests/qtest/libqtest.h" /* CSR function table public API */ void riscv_get_csr_ops(int csrno, riscv_csr_operations *ops) @@ -4549,6 +4549,53 @@ static RISCVException write_jvt(CPURISCVState *env, int csrno, return RISCV_EXCP_NONE; } +static uint64_t csr_call(char *cmd, uint64_t cpu_num, int csrno, + uint64_t *val) +{ + RISCVCPU *cpu = RISCV_CPU(cpu_by_arch_id(cpu_num)); + CPURISCVState *env = &cpu->env; + + int ret = RISCV_EXCP_NONE; + if (strcmp(cmd, "get_csr") == 0) { + ret = riscv_csrrw(env, csrno, (target_ulong *)val, 0, 0); + + } else if (strcmp(cmd, "set_csr") == 0) { + ret = riscv_csrrw(env, csrno, NULL, *(target_ulong *)val, MAKE_64BIT_MASK(0, TARGET_LONG_BITS)); + } + + if (ret == RISCV_EXCP_NONE) { + ret = 0; + } + + return ret; +} + +bool csr_qtest_callback(CharBackend *chr, gchar **words) +{ + if (strcmp(words[0], "csr") == 0) { + + uint64_t res, cpu; + + uint64_t val; + int rc, csr; + + rc = qemu_strtou64(words[2], NULL, 0, &cpu); + g_assert(rc == 0); + rc = qemu_strtoi(words[3], NULL, 0, &csr); + g_assert(rc == 0); + rc = qemu_strtou64(words[4], NULL, 0, &val); + g_assert(rc == 0); + res = csr_call(words[1], cpu, csr, &val); + + qtest_send_prefix(chr); + qtest_sendf(chr, "OK %"PRIx64" "TARGET_FMT_lx"\n", res, (target_ulong)val); + + return true; + } + + return false; +} + /* * Control and Status Register function table * riscv_csr_operations::predicate() must be provided for an implemented CSR diff --git a/tests/qtest/libqos/csr.c b/tests/qtest/libqos/csr.c new file mode 100644 index 0000000000..2dc52fc442 --- /dev/null +++ b/tests/qtest/libqos/csr.c @@ -0,0 +1,42 @@ +/* + * QTest RISC-V CSR driver + * + * Copyright (c) 2024 Syntacore + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#include "qemu/osdep.h" +#include "../libqtest.h" +#include "csr.h" + +static uint64_t qcsr_call(QTestState *qts, const char *name, uint64_t cpu, + int csrno, uint64_t *val) +{ + uint64_t res = 0; + + res = qtest_csr_call(qts, name, cpu, csrno, val); + + return res; +} + +int qcsr_get_csr(QTestState *qts, uint64_t cpu, + int csrno, uint64_t *val) +{ + int res; + + res = qcsr_call(qts, "get_csr", cpu, csrno, val); + + return res; +} + +int qcsr_set_csr(QTestState *qts, uint64_t cpu, + int csrno, uint64_t *val) +{ + int res; + + res = qcsr_call(qts, "set_csr", cpu, csrno, val); + + return res; +} diff --git a/tests/qtest/libqos/csr.h b/tests/qtest/libqos/csr.h new file mode 100644 index 0000000000..d953735fe8 --- /dev/null +++ b/tests/qtest/libqos/csr.h @@ -0,0 +1,16 @@ +/* + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef LIBQOS_CSR_H +#define LIBQOS_CSR_H + +int qcsr_get_csr(QTestState *qts, uint64_t cpu, + int csrno, uint64_t *val); + +int qcsr_set_csr(QTestState *qts, uint64_t cpu, + int csrno, uint64_t *val); + + +#endif /* LIBQOS_CSR_H */ diff --git a/tests/qtest/libqos/meson.build b/tests/qtest/libqos/meson.build index 558eb4c24b..a944febbd8 100644 --- a/tests/qtest/libqos/meson.build +++ b/tests/qtest/libqos/meson.build @@ -25,6 +25,9 @@ libqos_srcs = files( # usb 'usb.c', + #riscv csr + 'csr.c', + # qgraph devices: 'e1000e.c', 'i2c.c', diff --git a/tests/qtest/libqtest.c b/tests/qtest/libqtest.c index 18e2f7f282..4667d8d873 100644 --- a/tests/qtest/libqtest.c +++ b/tests/qtest/libqtest.c @@ -1200,6 +1200,33 @@ uint64_t qtest_rtas_call(QTestState *s, const char *name, return 0; } +static void qtest_rsp_csr(QTestState *s, uint64_t *val) +{ + gchar **args; + uint64_t ret; + int rc; + + args = qtest_rsp_args(s, 3); + + rc = qemu_strtou64(args[1], NULL, 16, &ret); + g_assert(rc == 0); + rc = qemu_strtou64(args[2], NULL, 16, val); + g_assert(rc == 0); + + g_strfreev(args); +} + +uint64_t qtest_csr_call(QTestState *s, const char *name, + uint64_t cpu, int csr, + uint64_t *val) +{ + qtest_sendf(s, "csr %s 0x%"PRIx64" %d 0x%"PRIx64"\n", + name, cpu, csr, *val); + + qtest_rsp_csr(s, val); + return 0; +} + void qtest_add_func(const char *str, void (*fn)(void)) { gchar *path = g_strdup_printf("/%s/%s", qtest_get_arch(), str); diff --git a/tests/qtest/libqtest.h b/tests/qtest/libqtest.h index beb96b18eb..a3336a0ea4 100644 --- a/tests/qtest/libqtest.h +++ b/tests/qtest/libqtest.h @@ -575,6 +575,20 @@ uint64_t qtest_rtas_call(QTestState *s, const char *name, uint32_t nargs, uint64_t args, uint32_t nret, uint64_t ret); +/** + * qtest_csr_call: + * @s: #QTestState instance to operate on. + * @name: name of the command to call. + * @cpu: hart number. + * @csr: CSR number. + * @val: Value for reading/writing. + * + * Call an CSR function + */ +uint64_t qtest_csr_call(QTestState *s, const char *name, + uint64_t cpu, int csr, + unsigned long *val); + /** * qtest_bufread: * @s: #QTestState instance to operate on.
The RISC-V architecture supports the creation of custom CSR-mapped devices. It would be convenient to test them in the same way as MMIO-mapped devices. To do this, a new call has been added to read/write CSR registers. Signed-off-by: Ivan Klokov <ivan.klokov@syntacore.com> --- target/riscv/cpu.c | 13 +++++++++ target/riscv/cpu.h | 3 +++ target/riscv/csr.c | 49 +++++++++++++++++++++++++++++++++- tests/qtest/libqos/csr.c | 42 +++++++++++++++++++++++++++++ tests/qtest/libqos/csr.h | 16 +++++++++++ tests/qtest/libqos/meson.build | 3 +++ tests/qtest/libqtest.c | 27 +++++++++++++++++++ tests/qtest/libqtest.h | 14 ++++++++++ 8 files changed, 166 insertions(+), 1 deletion(-) create mode 100644 tests/qtest/libqos/csr.c create mode 100644 tests/qtest/libqos/csr.h