diff mbox series

[v6] usb: dwc3: core: Workaround for CSR read timeout

Message ID 20240619050125.4444-1-joswang1221@gmail.com (mailing list archive)
State Superseded
Headers show
Series [v6] usb: dwc3: core: Workaround for CSR read timeout | expand

Commit Message

joswang June 19, 2024, 5:01 a.m. UTC
From: Jos Wang <joswang@lenovo.com>

This is a workaround for STAR 4846132, which only affects
DWC_usb31 version2.00a operating in host mode.

There is a problem in DWC_usb31 version 2.00a operating
in host mode that would cause a CSR read timeout When CSR
read coincides with RAM Clock Gating Entry. By disable
Clock Gating, sacrificing power consumption for normal
operation.

Cc: stable@vger.kernel.org
Signed-off-by: Jos Wang <joswang@lenovo.com>
---
v5 -> v6: no change
v4 -> v5: no change
v3 -> v4: modify commit message, add Cc: stable@vger.kernel.org
v2 -> v3:
- code refactor
- modify comment, add STAR number, workaround applied in host mode
- modify commit message, add STAR number, workaround applied in host mode
- modify Author Jos Wang
v1 -> v2: no change

 drivers/usb/dwc3/core.c | 20 +++++++++++++++++++-
 1 file changed, 19 insertions(+), 1 deletion(-)

Comments

Greg KH June 19, 2024, 5:10 a.m. UTC | #1
On Wed, Jun 19, 2024 at 01:01:25PM +0800, joswang wrote:
> From: Jos Wang <joswang@lenovo.com>
> 
> This is a workaround for STAR 4846132, which only affects
> DWC_usb31 version2.00a operating in host mode.
> 
> There is a problem in DWC_usb31 version 2.00a operating
> in host mode that would cause a CSR read timeout When CSR
> read coincides with RAM Clock Gating Entry. By disable
> Clock Gating, sacrificing power consumption for normal
> operation.
> 
> Cc: stable@vger.kernel.org
> Signed-off-by: Jos Wang <joswang@lenovo.com>
> ---
> v5 -> v6: no change
> v4 -> v5: no change

If there was no change, why was there new versions submitted?  Please
always document what was done.

greg k-h
joswang June 19, 2024, 11:18 a.m. UTC | #2
On Wed, Jun 19, 2024 at 1:10 PM Greg KH <gregkh@linuxfoundation.org> wrote:
>
> On Wed, Jun 19, 2024 at 01:01:25PM +0800, joswang wrote:
> > From: Jos Wang <joswang@lenovo.com>
> >
> > This is a workaround for STAR 4846132, which only affects
> > DWC_usb31 version2.00a operating in host mode.
> >
> > There is a problem in DWC_usb31 version 2.00a operating
> > in host mode that would cause a CSR read timeout When CSR
> > read coincides with RAM Clock Gating Entry. By disable
> > Clock Gating, sacrificing power consumption for normal
> > operation.
> >
> > Cc: stable@vger.kernel.org
> > Signed-off-by: Jos Wang <joswang@lenovo.com>
> > ---
> > v5 -> v6: no change
> > v4 -> v5: no change
>
> If there was no change, why was there new versions submitted?  Please
> always document what was done.
>
> greg k-h

Ok, I will submit a new version and add the differences.

Thanks,
Jos Wang
diff mbox series

Patch

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 7ee61a89520b..2a3adc80fe0f 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -957,12 +957,16 @@  static bool dwc3_core_is_valid(struct dwc3 *dwc)
 
 static void dwc3_core_setup_global_control(struct dwc3 *dwc)
 {
+	unsigned int power_opt;
+	unsigned int hw_mode;
 	u32 reg;
 
 	reg = dwc3_readl(dwc->regs, DWC3_GCTL);
 	reg &= ~DWC3_GCTL_SCALEDOWN_MASK;
+	hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0);
+	power_opt = DWC3_GHWPARAMS1_EN_PWROPT(dwc->hwparams.hwparams1);
 
-	switch (DWC3_GHWPARAMS1_EN_PWROPT(dwc->hwparams.hwparams1)) {
+	switch (power_opt) {
 	case DWC3_GHWPARAMS1_EN_PWROPT_CLK:
 		/**
 		 * WORKAROUND: DWC3 revisions between 2.10a and 2.50a have an
@@ -995,6 +999,20 @@  static void dwc3_core_setup_global_control(struct dwc3 *dwc)
 		break;
 	}
 
+	/*
+	 * This is a workaround for STAR#4846132, which only affects
+	 * DWC_usb31 version2.00a operating in host mode.
+	 *
+	 * There is a problem in DWC_usb31 version 2.00a operating
+	 * in host mode that would cause a CSR read timeout When CSR
+	 * read coincides with RAM Clock Gating Entry. By disable
+	 * Clock Gating, sacrificing power consumption for normal
+	 * operation.
+	 */
+	if (power_opt != DWC3_GHWPARAMS1_EN_PWROPT_NO &&
+	    hw_mode != DWC3_GHWPARAMS0_MODE_GADGET && DWC3_VER_IS(DWC31, 200A))
+		reg |= DWC3_GCTL_DSBLCLKGTNG;
+
 	/* check if current dwc3 is on simulation board */
 	if (dwc->hwparams.hwparams6 & DWC3_GHWPARAMS6_EN_FPGA) {
 		dev_info(dwc->dev, "Running with FPGA optimizations\n");