@@ -137,7 +137,7 @@ tx_pins {
<MT2712_PIN_74_GBE_TXD0__FUNC_GBE_TXD0>,
<MT2712_PIN_75_GBE_TXC__FUNC_GBE_TXC>,
<MT2712_PIN_76_GBE_TXEN__FUNC_GBE_TXEN>;
- drive-strength = <MTK_DRIVE_8mA>;
+ drive-strength = <8>;
};
rx_pins {
pinmux = <MT2712_PIN_78_GBE_RXD3__FUNC_GBE_RXD3>,
@@ -151,7 +151,7 @@ rx_pins {
mdio_pins {
pinmux = <MT2712_PIN_85_GBE_MDC__FUNC_GBE_MDC>,
<MT2712_PIN_86_GBE_MDIO__FUNC_GBE_MDIO>;
- drive-strength = <MTK_DRIVE_8mA>;
+ drive-strength = <8>;
input-enable;
};
};
@@ -288,25 +288,25 @@ pins-cmd-dat {
<PINMUX_GPIO161__FUNC_MSDC0_DAT7>,
<PINMUX_GPIO162__FUNC_MSDC0_CMD>;
input-enable;
- drive-strength = <MTK_DRIVE_6mA>;
+ drive-strength = <6>;
bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
};
pins-clk {
pinmux = <PINMUX_GPIO163__FUNC_MSDC0_CLK>;
- drive-strength = <MTK_DRIVE_6mA>;
+ drive-strength = <6>;
bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
};
pins-rst {
pinmux = <PINMUX_GPIO165__FUNC_MSDC0_RSTB>;
- drive-strength = <MTK_DRIVE_6mA>;
+ drive-strength = <6>;
bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
};
pins-ds {
pinmux = <PINMUX_GPIO164__FUNC_MSDC0_DSL>;
- drive-strength = <MTK_DRIVE_6mA>;
+ drive-strength = <6>;
bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
};
};
@@ -213,14 +213,14 @@ pins_cmd_dat {
<MT8173_PIN_76_MSDC1_DAT3__FUNC_MSDC1_DAT3>,
<MT8173_PIN_78_MSDC1_CMD__FUNC_MSDC1_CMD>;
input-enable;
- drive-strength = <MTK_DRIVE_4mA>;
+ drive-strength = <4>;
bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
};
pins_clk {
pinmux = <MT8173_PIN_77_MSDC1_CLK__FUNC_MSDC1_CLK>;
bias-pull-down;
- drive-strength = <MTK_DRIVE_4mA>;
+ drive-strength = <4>;
};
pins_insert {
@@ -241,13 +241,13 @@ pins_cmd_dat {
<MT8173_PIN_64_MSDC0_DAT7__FUNC_MSDC0_DAT7>,
<MT8173_PIN_66_MSDC0_CMD__FUNC_MSDC0_CMD>;
input-enable;
- drive-strength = <MTK_DRIVE_2mA>;
+ drive-strength = <2>;
bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
};
pins_clk {
pinmux = <MT8173_PIN_65_MSDC0_CLK__FUNC_MSDC0_CLK>;
- drive-strength = <MTK_DRIVE_2mA>;
+ drive-strength = <2>;
bias-pull-down = <MTK_PUPD_SET_R1R0_01>;
};
@@ -265,13 +265,13 @@ pins_cmd_dat {
<MT8173_PIN_76_MSDC1_DAT3__FUNC_MSDC1_DAT3>,
<MT8173_PIN_78_MSDC1_CMD__FUNC_MSDC1_CMD>;
input-enable;
- drive-strength = <MTK_DRIVE_4mA>;
+ drive-strength = <4>;
bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
};
pins_clk {
pinmux = <MT8173_PIN_77_MSDC1_CLK__FUNC_MSDC1_CLK>;
- drive-strength = <MTK_DRIVE_4mA>;
+ drive-strength = <4>;
bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
};
};
@@ -19,6 +19,6 @@ &qca_wifi {
&mmc1_pins_uhs {
pins-clk {
- drive-strength = <MTK_DRIVE_6mA>;
+ drive-strength = <6>;
};
};
@@ -19,6 +19,6 @@ &qca_wifi {
&mmc1_pins_uhs {
pins-clk {
- drive-strength = <MTK_DRIVE_6mA>;
+ drive-strength = <6>;
};
};
@@ -68,16 +68,16 @@ pins-wifi-enable {
&mmc1_pins_default {
pins-cmd-dat {
- drive-strength = <MTK_DRIVE_6mA>;
+ drive-strength = <6>;
};
pins-clk {
- drive-strength = <MTK_DRIVE_6mA>;
+ drive-strength = <6>;
};
};
&mmc1_pins_uhs {
pins-clk {
- drive-strength = <MTK_DRIVE_6mA>;
+ drive-strength = <6>;
};
};
@@ -488,7 +488,7 @@ pins-bus {
<PINMUX_GPIO172__FUNC_TDM_DATA1_2ND>,
<PINMUX_GPIO173__FUNC_TDM_DATA2_2ND>,
<PINMUX_GPIO10__FUNC_TDM_DATA3>; /*8ch-i2s to it6505*/
- drive-strength = <MTK_DRIVE_6mA>;
+ drive-strength = <6>;
};
};
@@ -502,7 +502,7 @@ pins-bus {
<PINMUX_GPIO10__FUNC_GPIO10>;
input-enable;
bias-pull-down;
- drive-strength = <MTK_DRIVE_2mA>;
+ drive-strength = <2>;
};
};
@@ -673,14 +673,14 @@ pins-cmd-dat {
<PINMUX_GPIO34__FUNC_MSDC1_DAT1>,
<PINMUX_GPIO33__FUNC_MSDC1_DAT2>,
<PINMUX_GPIO30__FUNC_MSDC1_DAT3>;
- drive-strength = <MTK_DRIVE_6mA>;
+ drive-strength = <6>;
input-enable;
mediatek,pull-up-adv = <10>;
};
pins-clk {
pinmux = <PINMUX_GPIO29__FUNC_MSDC1_CLK>;
- drive-strength = <MTK_DRIVE_8mA>;
+ drive-strength = <8>;
mediatek,pull-down-adv = <10>;
input-enable;
};
@@ -350,14 +350,14 @@ pins_cmd_dat {
<PINMUX_GPIO34__FUNC_MSDC1_DAT1>,
<PINMUX_GPIO33__FUNC_MSDC1_DAT2>,
<PINMUX_GPIO30__FUNC_MSDC1_DAT3>;
- drive-strength = <MTK_DRIVE_6mA>;
+ drive-strength = <6>;
input-enable;
mediatek,pull-up-adv = <10>;
};
pins_clk {
pinmux = <PINMUX_GPIO29__FUNC_MSDC1_CLK>;
- drive-strength = <MTK_DRIVE_8mA>;
+ drive-strength = <8>;
mediatek,pull-down-adv = <10>;
input-enable;
};
@@ -305,14 +305,14 @@ pins-txd {
<PINMUX_GPIO78__FUNC_GBE_TXD2>,
<PINMUX_GPIO79__FUNC_GBE_TXD1>,
<PINMUX_GPIO80__FUNC_GBE_TXD0>;
- drive-strength = <MTK_DRIVE_8mA>;
+ drive-strength = <8>;
};
pins-cc {
pinmux = <PINMUX_GPIO85__FUNC_GBE_TXC>,
<PINMUX_GPIO88__FUNC_GBE_TXEN>,
<PINMUX_GPIO87__FUNC_GBE_RXDV>,
<PINMUX_GPIO86__FUNC_GBE_RXC>;
- drive-strength = <MTK_DRIVE_8mA>;
+ drive-strength = <8>;
};
pins-rxd {
pinmux = <PINMUX_GPIO81__FUNC_GBE_RXD3>,
@@ -377,7 +377,7 @@ pins {
mmc0_default_pins: mmc0-default-pins {
pins-clk {
pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>;
- drive-strength = <MTK_DRIVE_6mA>;
+ drive-strength = <6>;
bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
};
@@ -392,13 +392,13 @@ pins-cmd-dat {
<PINMUX_GPIO116__FUNC_MSDC0_DAT7>,
<PINMUX_GPIO121__FUNC_MSDC0_CMD>;
input-enable;
- drive-strength = <MTK_DRIVE_6mA>;
+ drive-strength = <6>;
bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
};
pins-rst {
pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>;
- drive-strength = <MTK_DRIVE_6mA>;
+ drive-strength = <6>;
bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
};
};
@@ -406,7 +406,7 @@ pins-rst {
mmc0_uhs_pins: mmc0-uhs-pins {
pins-clk {
pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>;
- drive-strength = <MTK_DRIVE_8mA>;
+ drive-strength = <8>;
bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
};
@@ -421,19 +421,19 @@ pins-cmd-dat {
<PINMUX_GPIO116__FUNC_MSDC0_DAT7>,
<PINMUX_GPIO121__FUNC_MSDC0_CMD>;
input-enable;
- drive-strength = <MTK_DRIVE_8mA>;
+ drive-strength = <8>;
bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
};
pins-ds {
pinmux = <PINMUX_GPIO127__FUNC_MSDC0_DSL>;
- drive-strength = <MTK_DRIVE_8mA>;
+ drive-strength = <8>;
bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
};
pins-rst {
pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>;
- drive-strength = <MTK_DRIVE_8mA>;
+ drive-strength = <8>;
bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
};
};
@@ -441,7 +441,7 @@ pins-rst {
mmc1_default_pins: mmc1-default-pins {
pins-clk {
pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>;
- drive-strength = <MTK_DRIVE_8mA>;
+ drive-strength = <8>;
bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
};
@@ -452,7 +452,7 @@ pins-cmd-dat {
<PINMUX_GPIO114__FUNC_MSDC1_DAT2>,
<PINMUX_GPIO115__FUNC_MSDC1_DAT3>;
input-enable;
- drive-strength = <MTK_DRIVE_8mA>;
+ drive-strength = <8>;
bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
};
@@ -465,7 +465,7 @@ pins-insert {
mmc1_uhs_pins: mmc1-uhs-pins {
pins-clk {
pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>;
- drive-strength = <MTK_DRIVE_8mA>;
+ drive-strength = <8>;
bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
};
@@ -476,7 +476,7 @@ pins-cmd-dat {
<PINMUX_GPIO114__FUNC_MSDC1_DAT2>,
<PINMUX_GPIO115__FUNC_MSDC1_DAT3>;
input-enable;
- drive-strength = <MTK_DRIVE_8mA>;
+ drive-strength = <8>;
bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
};
};
@@ -308,7 +308,7 @@ cmd-dat-pins {
mmc1_uhs_pins: mmc1-uhs-pins {
clk-pins {
pinmux = <MT8365_PIN_88_MSDC1_CLK__FUNC_MSDC1_CLK>;
- drive-strength = <MTK_DRIVE_8mA>;
+ drive-strength = <8>;
bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
};
@@ -319,7 +319,7 @@ cmd-dat-pins {
<MT8365_PIN_92_MSDC1_DAT3__FUNC_MSDC1_DAT3>,
<MT8365_PIN_87_MSDC1_CMD__FUNC_MSDC1_CMD>;
input-enable;
- drive-strength = <MTK_DRIVE_6mA>;
+ drive-strength = <6>;
bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
};
};
@@ -383,13 +383,13 @@ pins-cc {
<PINMUX_GPIO140__FUNC_I0_GBE_RXC>,
<PINMUX_GPIO141__FUNC_I0_GBE_RXDV>,
<PINMUX_GPIO142__FUNC_O_GBE_TXEN>;
- drive-strength = <MTK_DRIVE_8mA>;
+ drive-strength = <8>;
};
pins-mdio {
pinmux = <PINMUX_GPIO143__FUNC_O_GBE_MDC>,
<PINMUX_GPIO144__FUNC_B1_GBE_MDIO>;
- drive-strength = <MTK_DRIVE_8mA>;
+ drive-strength = <8>;
input-enable;
};
@@ -404,7 +404,7 @@ pins-rxd {
<PINMUX_GPIO136__FUNC_I0_GBE_RXD2>,
<PINMUX_GPIO137__FUNC_I0_GBE_RXD1>,
<PINMUX_GPIO138__FUNC_I0_GBE_RXD0>;
- drive-strength = <MTK_DRIVE_8mA>;
+ drive-strength = <8>;
};
pins-txd {
@@ -412,7 +412,7 @@ pins-txd {
<PINMUX_GPIO132__FUNC_O_GBE_TXD2>,
<PINMUX_GPIO133__FUNC_O_GBE_TXD1>,
<PINMUX_GPIO134__FUNC_O_GBE_TXD0>;
- drive-strength = <MTK_DRIVE_8mA>;
+ drive-strength = <8>;
};
};
@@ -520,7 +520,7 @@ pins {
mmc0_default_pins: mmc0-default-pins {
pins-clk {
pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>;
- drive-strength = <MTK_DRIVE_6mA>;
+ drive-strength = <6>;
bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
};
@@ -535,13 +535,13 @@ pins-cmd-dat {
<PINMUX_GPIO151__FUNC_B1_MSDC0_DAT7>,
<PINMUX_GPIO156__FUNC_B1_MSDC0_CMD>;
input-enable;
- drive-strength = <MTK_DRIVE_6mA>;
+ drive-strength = <6>;
bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
};
pins-rst {
pinmux = <PINMUX_GPIO155__FUNC_O_MSDC0_RSTB>;
- drive-strength = <MTK_DRIVE_6mA>;
+ drive-strength = <6>;
bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
};
};
@@ -549,7 +549,7 @@ pins-rst {
mmc0_uhs_pins: mmc0-uhs-pins {
pins-clk {
pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>;
- drive-strength = <MTK_DRIVE_8mA>;
+ drive-strength = <8>;
bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
};
@@ -564,19 +564,19 @@ pins-cmd-dat {
<PINMUX_GPIO151__FUNC_B1_MSDC0_DAT7>,
<PINMUX_GPIO156__FUNC_B1_MSDC0_CMD>;
input-enable;
- drive-strength = <MTK_DRIVE_8mA>;
+ drive-strength = <8>;
bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
};
pins-ds {
pinmux = <PINMUX_GPIO162__FUNC_B0_MSDC0_DSL>;
- drive-strength = <MTK_DRIVE_8mA>;
+ drive-strength = <8>;
bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
};
pins-rst {
pinmux = <PINMUX_GPIO155__FUNC_O_MSDC0_RSTB>;
- drive-strength = <MTK_DRIVE_8mA>;
+ drive-strength = <8>;
bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
};
};
@@ -584,7 +584,7 @@ pins-rst {
mmc1_default_pins: mmc1-default-pins {
pins-clk {
pinmux = <PINMUX_GPIO164__FUNC_B1_MSDC1_CLK>;
- drive-strength = <MTK_DRIVE_6mA>;
+ drive-strength = <6>;
bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
};
@@ -595,7 +595,7 @@ pins-cmd-dat {
<PINMUX_GPIO167__FUNC_B1_MSDC1_DAT2>,
<PINMUX_GPIO168__FUNC_B1_MSDC1_DAT3>;
input-enable;
- drive-strength = <MTK_DRIVE_6mA>;
+ drive-strength = <6>;
bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
};
@@ -608,7 +608,7 @@ pins-insert {
mmc1_uhs_pins: mmc1-uhs-pins {
pins-clk {
pinmux = <PINMUX_GPIO164__FUNC_B1_MSDC1_CLK>;
- drive-strength = <MTK_DRIVE_6mA>;
+ drive-strength = <6>;
bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
};
@@ -619,7 +619,7 @@ pins-cmd-dat {
<PINMUX_GPIO167__FUNC_B1_MSDC1_DAT2>,
<PINMUX_GPIO168__FUNC_B1_MSDC1_DAT3>;
input-enable;
- drive-strength = <MTK_DRIVE_6mA>;
+ drive-strength = <6>;
bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
};
};
@@ -627,7 +627,7 @@ pins-cmd-dat {
mmc2_default_pins: mmc2-default-pins {
pins-clk {
pinmux = <PINMUX_GPIO170__FUNC_B1_MSDC2_CLK>;
- drive-strength = <MTK_DRIVE_4mA>;
+ drive-strength = <4>;
bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
};
@@ -638,7 +638,7 @@ pins-cmd-dat {
<PINMUX_GPIO173__FUNC_B1_MSDC2_DAT2>,
<PINMUX_GPIO174__FUNC_B1_MSDC2_DAT3>;
input-enable;
- drive-strength = <MTK_DRIVE_6mA>;
+ drive-strength = <6>;
bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
};
@@ -650,7 +650,7 @@ pins-pcm {
mmc2_uhs_pins: mmc2-uhs-pins {
pins-clk {
pinmux = <PINMUX_GPIO170__FUNC_B1_MSDC2_CLK>;
- drive-strength = <MTK_DRIVE_4mA>;
+ drive-strength = <4>;
bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
};
@@ -661,7 +661,7 @@ pins-cmd-dat {
<PINMUX_GPIO173__FUNC_B1_MSDC2_DAT2>,
<PINMUX_GPIO174__FUNC_B1_MSDC2_DAT3>;
input-enable;
- drive-strength = <MTK_DRIVE_6mA>;
+ drive-strength = <6>;
bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
};
};
@@ -678,7 +678,7 @@ mmc2_dat1_pins: mmc2-dat1-pins {
pins-dat1 {
pinmux = <PINMUX_GPIO172__FUNC_B1_MSDC2_DAT1>;
input-enable;
- drive-strength = <MTK_DRIVE_6mA>;
+ drive-strength = <6>;
bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
};
};
@@ -475,7 +475,7 @@ pins-cc {
<PINMUX_GPIO86__FUNC_GBE_RXC>,
<PINMUX_GPIO87__FUNC_GBE_RXDV>,
<PINMUX_GPIO88__FUNC_GBE_TXEN>;
- drive-strength = <MTK_DRIVE_8mA>;
+ drive-strength = <8>;
};
pins-mdio {
@@ -502,7 +502,7 @@ pins-txd {
<PINMUX_GPIO78__FUNC_GBE_TXD2>,
<PINMUX_GPIO79__FUNC_GBE_TXD1>,
<PINMUX_GPIO80__FUNC_GBE_TXD0>;
- drive-strength = <MTK_DRIVE_8mA>;
+ drive-strength = <8>;
};
};
@@ -567,7 +567,7 @@ pins {
pinmux = <PINMUX_GPIO12__FUNC_SDA2>,
<PINMUX_GPIO13__FUNC_SCL2>;
bias-pull-up = <MTK_PULL_SET_RSEL_111>;
- drive-strength = <MTK_DRIVE_6mA>;
+ drive-strength = <6>;
};
};
@@ -582,7 +582,7 @@ pins {
mmc0_default_pins: mmc0-default-pins {
pins-clk {
pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>;
- drive-strength = <MTK_DRIVE_6mA>;
+ drive-strength = <6>;
bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
};
@@ -597,13 +597,13 @@ pins-cmd-dat {
<PINMUX_GPIO116__FUNC_MSDC0_DAT7>,
<PINMUX_GPIO121__FUNC_MSDC0_CMD>;
input-enable;
- drive-strength = <MTK_DRIVE_6mA>;
+ drive-strength = <6>;
bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
};
pins-rst {
pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>;
- drive-strength = <MTK_DRIVE_6mA>;
+ drive-strength = <6>;
bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
};
};
@@ -611,7 +611,7 @@ pins-rst {
mmc0_uhs_pins: mmc0-uhs-pins {
pins-clk {
pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>;
- drive-strength = <MTK_DRIVE_8mA>;
+ drive-strength = <8>;
bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
};
@@ -626,19 +626,19 @@ pins-cmd-dat {
<PINMUX_GPIO116__FUNC_MSDC0_DAT7>,
<PINMUX_GPIO121__FUNC_MSDC0_CMD>;
input-enable;
- drive-strength = <MTK_DRIVE_8mA>;
+ drive-strength = <8>;
bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
};
pins-ds {
pinmux = <PINMUX_GPIO127__FUNC_MSDC0_DSL>;
- drive-strength = <MTK_DRIVE_8mA>;
+ drive-strength = <8>;
bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
};
pins-rst {
pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>;
- drive-strength = <MTK_DRIVE_8mA>;
+ drive-strength = <8>;
bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
};
};
@@ -646,7 +646,7 @@ pins-rst {
mmc1_default_pins: mmc1-default-pins {
pins-clk {
pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>;
- drive-strength = <MTK_DRIVE_8mA>;
+ drive-strength = <8>;
bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
};
@@ -657,7 +657,7 @@ pins-cmd-dat {
<PINMUX_GPIO114__FUNC_MSDC1_DAT2>,
<PINMUX_GPIO115__FUNC_MSDC1_DAT3>;
input-enable;
- drive-strength = <MTK_DRIVE_8mA>;
+ drive-strength = <8>;
bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
};
};
@@ -665,7 +665,7 @@ pins-cmd-dat {
mmc1_uhs_pins: mmc1-uhs-pins {
pins-clk {
pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>;
- drive-strength = <MTK_DRIVE_8mA>;
+ drive-strength = <8>;
bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
};
@@ -676,7 +676,7 @@ pins-cmd-dat {
<PINMUX_GPIO114__FUNC_MSDC1_DAT2>,
<PINMUX_GPIO115__FUNC_MSDC1_DAT3>;
input-enable;
- drive-strength = <MTK_DRIVE_8mA>;
+ drive-strength = <8>;
bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
};
};
On some devicetrees, the drive-strength property gets assigned a MTK_DRIVE_(x)_mA definition, which matches with (x). For example, MTK_DRIVE_8mA equals to 8 and MTK_DRIVE_30mA equals to 30. Also keeping in mind that the drive-strength property is, by (binding) definition, taking a number in milliamperes unit, change all devicetrees to avoid the usage of any MTK_DRIVE_(x) definition. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> --- arch/arm64/boot/dts/mediatek/mt2712-evb.dts | 4 +- .../dts/mediatek/mt6795-sony-xperia-m5.dts | 8 ++-- arch/arm64/boot/dts/mediatek/mt8173-evb.dts | 12 +++--- .../mt8183-kukui-jacuzzi-makomo-sku0.dts | 2 +- .../mt8183-kukui-jacuzzi-makomo-sku1.dts | 2 +- .../mediatek/mt8183-kukui-jacuzzi-pico6.dts | 6 +-- .../arm64/boot/dts/mediatek/mt8183-kukui.dtsi | 8 ++-- .../boot/dts/mediatek/mt8183-pumpkin.dts | 4 +- arch/arm64/boot/dts/mediatek/mt8195-demo.dts | 26 ++++++------ arch/arm64/boot/dts/mediatek/mt8365-evk.dts | 4 +- .../dts/mediatek/mt8390-genio-700-evk.dts | 40 +++++++++---------- .../dts/mediatek/mt8395-genio-1200-evk.dts | 28 ++++++------- 12 files changed, 72 insertions(+), 72 deletions(-)