mbox series

[v1,0/7] Enable CPR for IPQ9574

Message ID 20240620081427.2860066-1-quic_varada@quicinc.com (mailing list archive)
Headers show
Series Enable CPR for IPQ9574 | expand

Message

Varadarajan Narayanan June 20, 2024, 8:14 a.m. UTC 
This series tries to enable CPR on IPQ9574, that implements
CPRv4. Since [1] is older, faced few minor issues. Those are
addressed in [2].

dt_binding_check and dtbs_check passed.

Depends:
	[1] https://lore.kernel.org/lkml/20230217-topic-cpr3h-v14-0-9fd23241493d@linaro.org/T/
	[2] https://github.com/quic-varada/cpr/commits/konrad/

Varadarajan Narayanan (7):
  dt-bindings: power: rpmpd: Add IPQ9574 power domains
  dt-bindings: soc: qcom: cpr3: Add bindings for IPQ9574
  pmdomain: qcom: rpmpd: Add IPQ9574 power domains
  dt-bindings: clock: Add CPR clock defines for IPQ9574
  clk: qcom: gcc-ipq9574: Add CPR clock definition
  soc: qcom: cpr3: Add IPQ9574 definitions
  dts: arm64: qcom: ipq9574: Enable CPR

 .../devicetree/bindings/power/qcom,rpmpd.yaml |   1 +
 .../bindings/soc/qcom/qcom,cpr3.yaml          |  32 +++
 arch/arm64/boot/dts/qcom/ipq9574.dtsi         | 269 ++++++++++++++++--
 drivers/clk/qcom/gcc-ipq9574.c                |  38 +++
 drivers/pmdomain/qcom/cpr3.c                  | 137 +++++++++
 drivers/pmdomain/qcom/rpmpd.c                 |  19 ++
 include/dt-bindings/clock/qcom,ipq9574-gcc.h  |   1 +
 include/dt-bindings/power/qcom-rpmpd.h        |   3 +
 8 files changed, 483 insertions(+), 17 deletions(-)

Comments

Konrad Dybcio June 20, 2024, 3:55 p.m. UTC | #1 
On 6/20/24 10:14, Varadarajan Narayanan wrote:
> This series tries to enable CPR on IPQ9574, that implements
> CPRv4. Since [1] is older, faced few minor issues. Those are
> addressed in [2].

Thanks Varadarajan, should things go well I'll resend CPR3 next
week and then review this.

Konrad