diff mbox series

[v3,17/23] mfd: add s2dos series core driver

Message ID 20240618-starqltechn_integration_upstream-v3-17-e3f6662017ac@gmail.com (mailing list archive)
State Superseded
Headers show
Series This is continued work on Samsung S9(SM-9600) starqltechn | expand

Commit Message

Dzmitry Sankouski June 18, 2024, 1:59 p.m. UTC
S2DOS05 is a panel/touchscreen PMIC, often found in
Samsung phones. We define 2 sub-devices for which drivers will
be added in subsequent patches.

Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
---
 MAINTAINERS                            |   1 +
 drivers/mfd/Kconfig                    |  13 +++
 drivers/mfd/Makefile                   |   2 +-
 drivers/mfd/s2dos-core.c               | 141 +++++++++++++++++++++++++++++++++
 include/linux/mfd/samsung/s2dos-core.h |  21 +++++
 include/linux/mfd/samsung/s2dos05.h    | 115 +++++++++++++++++++++++++++
 6 files changed, 292 insertions(+), 1 deletion(-)

Comments

Krzysztof Kozlowski June 20, 2024, 4:07 p.m. UTC | #1
On 18/06/2024 15:59, Dzmitry Sankouski wrote:
> S2DOS05 is a panel/touchscreen PMIC, often found in
> Samsung phones. We define 2 sub-devices for which drivers will
> be added in subsequent patches.
> 
> Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
> ---
>  MAINTAINERS                            |   1 +
>  drivers/mfd/Kconfig                    |  13 +++
>  drivers/mfd/Makefile                   |   2 +-
>  drivers/mfd/s2dos-core.c               | 141 +++++++++++++++++++++++++++++++++
>  include/linux/mfd/samsung/s2dos-core.h |  21 +++++
>  include/linux/mfd/samsung/s2dos05.h    | 115 +++++++++++++++++++++++++++
>  6 files changed, 292 insertions(+), 1 deletion(-)
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index f3c245d432d9..b53462684a30 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -19908,6 +19908,7 @@ F:	Documentation/devicetree/bindings/regulator/samsung,s2dos*.yaml
>  F:	Documentation/devicetree/bindings/regulator/samsung,s2m*.yaml
>  F:	Documentation/devicetree/bindings/regulator/samsung,s5m*.yaml
>  F:	drivers/clk/clk-s2mps11.c
> +F:	drivers/mfd/s2dos*.c
>  F:	drivers/mfd/sec*.c
>  F:	drivers/regulator/s2m*.c
>  F:	drivers/regulator/s5m*.c
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index c4eb8ff2dcad..517d8778d7a8 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -1278,6 +1278,19 @@ config MFD_RN5T618
>  	  additional drivers must be enabled in order to use the
>  	  functionality of the device.
>  
> +config MFD_S2DOS_CORE
> +	tristate "Samsung Electronics PMIC Series Support"

Nope, that's a strong NAK.

No need for one more clone of Samsung PMIC driver.


Best regards,
Krzysztof
kernel test robot June 21, 2024, 8:33 p.m. UTC | #2
Hi Dzmitry,

kernel test robot noticed the following build warnings:

[auto build test WARNING on 6906a84c482f098d31486df8dc98cead21cce2d0]

url:    https://github.com/intel-lab-lkp/linux/commits/Dzmitry-Sankouski/power-supply-add-undervoltage-health-status-property/20240618-222456
base:   6906a84c482f098d31486df8dc98cead21cce2d0
patch link:    https://lore.kernel.org/r/20240618-starqltechn_integration_upstream-v3-17-e3f6662017ac%40gmail.com
patch subject: [PATCH v3 17/23] mfd: add s2dos series core driver
config: mips-allyesconfig (https://download.01.org/0day-ci/archive/20240622/202406220455.UpxNyPhg-lkp@intel.com/config)
compiler: mips-linux-gcc (GCC) 13.2.0
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20240622/202406220455.UpxNyPhg-lkp@intel.com/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202406220455.UpxNyPhg-lkp@intel.com/

All warnings (new ones prefixed by >>):

   drivers/mfd/s2dos-core.c: In function 's2dos05_i2c_probe':
>> drivers/mfd/s2dos-core.c:88:13: warning: variable 'ret' set but not used [-Wunused-but-set-variable]
      88 |         int ret = 0;
         |             ^~~


vim +/ret +88 drivers/mfd/s2dos-core.c

    79	
    80	
    81	static int s2dos05_i2c_probe(struct i2c_client *i2c)
    82	{
    83		struct s2dos_core *s2dos05;
    84		struct regmap *regmap;
    85		struct device *dev = &i2c->dev;
    86	
    87		unsigned int reg_data;
  > 88		int ret = 0;
    89	
    90		s2dos05 = kzalloc(sizeof(struct s2dos_core), GFP_KERNEL);
    91		if (!s2dos05)
    92			return -ENOMEM;
    93	
    94		regmap = devm_regmap_init_i2c(i2c, &s2dos05_regmap_config);
    95		if (IS_ERR(regmap)) {
    96			dev_err(dev, "Unable to initialise I2C Regmap\n");
    97			return PTR_ERR(regmap);
    98		}
    99		s2dos05->regmap = regmap;
   100	
   101		if (regmap_read(regmap, S2DOS05_REG_DEV_ID, &reg_data) < 0) {
   102			dev_err(dev,
   103				"device not found on this channel (this is not an error)\n");
   104			ret = -ENODEV;
   105		} else {
   106			dev_info(dev, "%s device found with id: .0x%x\n",
   107					__func__, reg_data);
   108		}
   109	
   110		i2c_set_clientdata(i2c, s2dos05);
   111	
   112		debugfs_file = debugfs_create_file("s2dos05-regs",
   113					0664, NULL, (void *)s2dos05,
   114					  &s2dos05_debugfs_fops);
   115		if (!debugfs_file)
   116			dev_err(dev, "Failed to create debugfs file\n");
   117	
   118		return mfd_add_devices(dev, -1, s2dos05_devs,
   119				ARRAY_SIZE(s2dos05_devs), NULL, 0, NULL);
   120	}
   121
diff mbox series

Patch

diff --git a/MAINTAINERS b/MAINTAINERS
index f3c245d432d9..b53462684a30 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -19908,6 +19908,7 @@  F:	Documentation/devicetree/bindings/regulator/samsung,s2dos*.yaml
 F:	Documentation/devicetree/bindings/regulator/samsung,s2m*.yaml
 F:	Documentation/devicetree/bindings/regulator/samsung,s5m*.yaml
 F:	drivers/clk/clk-s2mps11.c
+F:	drivers/mfd/s2dos*.c
 F:	drivers/mfd/sec*.c
 F:	drivers/regulator/s2m*.c
 F:	drivers/regulator/s5m*.c
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index c4eb8ff2dcad..517d8778d7a8 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -1278,6 +1278,19 @@  config MFD_RN5T618
 	  additional drivers must be enabled in order to use the
 	  functionality of the device.
 
+config MFD_S2DOS_CORE
+	tristate "Samsung Electronics PMIC Series Support"
+	depends on I2C=y
+	depends on OF
+	select MFD_CORE
+	select REGMAP_I2C
+	help
+	  Support for the Samsung Electronics PMIC devices
+	  usually used to power displays.
+	  This driver provides common support for accessing the device,
+	  additional drivers must be enabled in order to use the functionality
+	  of the device.
+
 config MFD_SEC_CORE
 	tristate "Samsung Electronics PMIC Series Support"
 	depends on I2C=y
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index bf65cc36d59c..37c51aab0205 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -228,7 +228,7 @@  obj-$(CONFIG_MFD_RK8XX_I2C)	+= rk8xx-i2c.o
 obj-$(CONFIG_MFD_RK8XX_SPI)	+= rk8xx-spi.o
 obj-$(CONFIG_MFD_RN5T618)	+= rn5t618.o
 obj-$(CONFIG_MFD_SEC_CORE)	+= sec-core.o sec-irq.o
-obj-$(CONFIG_MFD_S2DOS05)	+= s2dos05.o
+obj-$(CONFIG_MFD_S2DOS_CORE)	+= s2dos-core.o
 obj-$(CONFIG_MFD_SYSCON)	+= syscon.o
 obj-$(CONFIG_MFD_LM3533)	+= lm3533-core.o lm3533-ctrlbank.o
 obj-$(CONFIG_MFD_VEXPRESS_SYSREG)	+= vexpress-sysreg.o
diff --git a/drivers/mfd/s2dos-core.c b/drivers/mfd/s2dos-core.c
new file mode 100644
index 000000000000..a04363b15a2a
--- /dev/null
+++ b/drivers/mfd/s2dos-core.c
@@ -0,0 +1,141 @@ 
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * s2dos05.c - mfd core driver for the s2dos05 chip
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Copyright (C) 2024 Dzmitry Sankouski <dsankouski@gmail.com>
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/mutex.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/samsung/s2dos-core.h>
+#include <linux/mfd/samsung/s2dos05.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/debugfs.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
+
+static struct dentry *debugfs_file;
+
+static int s2dos05_debugfs_show(struct seq_file *s, void *data)
+{
+	struct s2dos_core *s2dos05 = s->private;
+	struct regmap *regmap = s2dos05->regmap;
+	unsigned int i, reg, reg_data, pmic_id;
+	int regs[] = {
+		S2DOS05_REG_DEV_ID,
+		S2DOS05_REG_TOPSYS_STAT,
+		S2DOS05_REG_STAT,
+		S2DOS05_REG_EN,
+		S2DOS05_REG_LDO1_CFG,
+		S2DOS05_REG_LDO2_CFG,
+		S2DOS05_REG_LDO3_CFG,
+		S2DOS05_REG_LDO4_CFG,
+		S2DOS05_REG_BUCK_CFG,
+		S2DOS05_REG_BUCK_VOUT,
+		S2DOS05_REG_IRQ_MASK,
+		S2DOS05_REG_SSD_TSD,
+		S2DOS05_REG_OCL,
+		S2DOS05_REG_IRQ
+	};
+	regmap_read(regmap, S2DOS05_REG_DEV_ID, &pmic_id);
+	seq_printf(s, "S2DOS05, id: %d\n", pmic_id);
+	seq_puts(s, "===================\n");
+	for (i = 0; i < ARRAY_SIZE(regs); i++) {
+		reg = regs[i];
+		regmap_read(regmap, reg, &reg_data);
+		seq_printf(s, "0x%02x:\t0x%02x\n", reg, reg_data);
+	}
+
+	seq_puts(s, "\n");
+	return 0;
+}
+
+DEFINE_SHOW_ATTRIBUTE(s2dos05_debugfs);
+
+static const struct regmap_config s2dos05_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = S2DOS05_REG_IRQ,
+};
+
+static struct mfd_cell s2dos05_devs[] = {
+	{ .name = "s2dos05-fg" },
+	{
+		.name = "s2dos05-regulator",
+		.of_compatible = "samsung,s2dos05-regulator",
+	},
+};
+
+
+static int s2dos05_i2c_probe(struct i2c_client *i2c)
+{
+	struct s2dos_core *s2dos05;
+	struct regmap *regmap;
+	struct device *dev = &i2c->dev;
+
+	unsigned int reg_data;
+	int ret = 0;
+
+	s2dos05 = kzalloc(sizeof(struct s2dos_core), GFP_KERNEL);
+	if (!s2dos05)
+		return -ENOMEM;
+
+	regmap = devm_regmap_init_i2c(i2c, &s2dos05_regmap_config);
+	if (IS_ERR(regmap)) {
+		dev_err(dev, "Unable to initialise I2C Regmap\n");
+		return PTR_ERR(regmap);
+	}
+	s2dos05->regmap = regmap;
+
+	if (regmap_read(regmap, S2DOS05_REG_DEV_ID, &reg_data) < 0) {
+		dev_err(dev,
+			"device not found on this channel (this is not an error)\n");
+		ret = -ENODEV;
+	} else {
+		dev_info(dev, "%s device found with id: .0x%x\n",
+				__func__, reg_data);
+	}
+
+	i2c_set_clientdata(i2c, s2dos05);
+
+	debugfs_file = debugfs_create_file("s2dos05-regs",
+				0664, NULL, (void *)s2dos05,
+				  &s2dos05_debugfs_fops);
+	if (!debugfs_file)
+		dev_err(dev, "Failed to create debugfs file\n");
+
+	return mfd_add_devices(dev, -1, s2dos05_devs,
+			ARRAY_SIZE(s2dos05_devs), NULL, 0, NULL);
+}
+
+static const struct of_device_id s2dos05_i2c_dt_ids[] = {
+	{ .compatible = "samsung,s2dos05-pmic" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, s2dos05_i2c_dt_ids);
+
+static struct i2c_driver s2dos05_i2c_driver = {
+	.driver		= {
+		.name	= "s2dos-core",
+		.owner	= THIS_MODULE,
+		.of_match_table	= s2dos05_i2c_dt_ids,
+	},
+	.probe		= s2dos05_i2c_probe,
+};
+
+module_i2c_driver(s2dos05_i2c_driver);
+
+MODULE_DESCRIPTION("s2dos core driver");
+MODULE_AUTHOR("Dzmitry Sankouski <dsankouski@gmail.com>");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/mfd/samsung/s2dos-core.h b/include/linux/mfd/samsung/s2dos-core.h
new file mode 100644
index 000000000000..7e84b387063c
--- /dev/null
+++ b/include/linux/mfd/samsung/s2dos-core.h
@@ -0,0 +1,21 @@ 
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * s2dos-core.h
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd
+ *              http://www.samsung.com
+ * Copyright (C) 2024 Dzmitry Sankouski <dsankouski@gmail.com>
+ *
+ */
+
+#ifndef __LINUX_MFD_S2DOS_CORE_H
+#define __LINUX_MFD_S2DOS_CORE_H
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+struct s2dos_core {
+	struct device *dev;
+	struct regmap *regmap;
+};
+
+#endif /*  __LINUX_MFD_S2DOS_CORE_H */
diff --git a/include/linux/mfd/samsung/s2dos05.h b/include/linux/mfd/samsung/s2dos05.h
new file mode 100644
index 000000000000..0317dbe56f10
--- /dev/null
+++ b/include/linux/mfd/samsung/s2dos05.h
@@ -0,0 +1,115 @@ 
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * s2dos05.h
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd
+ *              http://www.samsung.com
+ *
+ */
+
+#ifndef __LINUX_MFD_S2DOS05_H
+#define __LINUX_MFD_S2DOS05_H
+
+/* S2DOS05 registers */
+/* Slave Addr : 0xC0 */
+enum s2dos05_reg {
+	S2DOS05_REG_DEV_ID,
+	S2DOS05_REG_TOPSYS_STAT,
+	S2DOS05_REG_STAT,
+	S2DOS05_REG_EN,
+	S2DOS05_REG_LDO1_CFG,
+	S2DOS05_REG_LDO2_CFG,
+	S2DOS05_REG_LDO3_CFG,
+	S2DOS05_REG_LDO4_CFG,
+	S2DOS05_REG_BUCK_CFG,
+	S2DOS05_REG_BUCK_VOUT,
+	S2DOS05_REG_IRQ_MASK = 0x0D,
+	S2DOS05_REG_SSD_TSD = 0x0E,
+	S2DOS05_REG_OCL = 0x10,
+	S2DOS05_REG_IRQ = 0x11
+};
+
+/* S2DOS05 regulator ids */
+enum s2dos05_regulators {
+	S2DOS05_LDO1,
+	S2DOS05_LDO2,
+	S2DOS05_LDO3,
+	S2DOS05_LDO4,
+	S2DOS05_BUCK1,
+	S2DOS05_REG_MAX,
+};
+
+#define S2DOS05_IRQ_PWRMT_MASK	BIT(5)
+#define S2DOS05_IRQ_TSD_MASK	BIT(4)
+#define S2DOS05_IRQ_SSD_MASK	BIT(3)
+#define S2DOS05_IRQ_SCP_MASK	BIT(2)
+#define S2DOS05_IRQ_UVLO_MASK	BIT(1)
+#define S2DOS05_IRQ_OCD_MASK	BIT(0)
+
+#define S2DOS05_BUCK_MIN1	506250
+#define S2DOS05_LDO_MIN1	1500000
+#define S2DOS05_LDO_MIN2	2700000
+#define S2DOS05_BUCK_STEP1	6250
+#define S2DOS05_LDO_STEP1	25000
+#define S2DOS05_LDO_VSEL_MASK	0x7F
+#define S2DOS05_LDO_FD_MASK	BIT(7)
+#define S2DOS05_BUCK_VSEL_MASK	0xFF
+#define S2DOS05_BUCK_FD_MASK	BIT(3)
+
+#define S2DOS05_ENABLE_MASK_L1	BIT(0)
+#define S2DOS05_ENABLE_MASK_L2	BIT(1)
+#define S2DOS05_ENABLE_MASK_L3	BIT(2)
+#define S2DOS05_ENABLE_MASK_L4	BIT(3)
+#define S2DOS05_ENABLE_MASK_B1	BIT(4)
+
+#define S2DOS05_RAMP_DELAY	12000
+
+#define S2DOS05_ENABLE_TIME_LDO		50
+#define S2DOS05_ENABLE_TIME_BUCK	350
+
+#define S2DOS05_ENABLE_SHIFT	0x06
+#define S2DOS05_LDO_N_VOLTAGES	(S2DOS05_LDO_VSEL_MASK + 1)
+#define S2DOS05_BUCK_N_VOLTAGES (S2DOS05_BUCK_VSEL_MASK + 1)
+
+#define S2DOS05_PMIC_EN_SHIFT	6
+#define S2DOS05_REGULATOR_MAX (S2DOS05_REG_MAX)
+
+/* ----------power meter ----------*/
+#define S2DOS05_REG_PWRMT_CTRL1		0x0A
+#define S2DOS05_REG_PWRMT_CTRL2		0x0B
+#define S2DOS05_REG_PWRMT_DATA	0x0C
+#define S2DOS05_REG_IRQ_MASK	0x0D
+
+#define CHANNEL_ELVDD	0
+#define CHANNEL_ELVSS	1
+#define CHANNEL_AVDD	2
+#define CHANNEL_BUCK	3
+#define CHANNEL_L1	4
+#define CHANNEL_L2	5
+#define CHANNEL_L3	6
+#define CHANNEL_L4	7
+
+#define POWER_ELVDD			24500
+#define POWER_ELVSS			24500
+#define POWER_AVDD			3060
+#define POWER_BUCK			1525
+#define POWER_L1			5000
+#define POWER_L2			5000
+#define POWER_L3			5000
+#define POWER_L4			5000
+
+/* S2DOS05_REG_OCL */
+#define ADC_VALID_MASK			BIT(7)
+/* S2DOS05_REG_PWRMT_CTRL1 */
+#define ADC_ASYNCRD_MASK		BIT(7)
+#define PWRMT_EN_CHK			BIT(6)
+#define SMPNUM_MASK			0x0F
+/* S2DOS05_REG_PWRMT_CTRL2 */
+#define ADC_EN_MASK			BIT(7)
+#define ADC_PTR_MASK			0x0F
+#define POWER_MODE			BIT(4)
+#define RAWCURRENT_MODE			BIT(5)
+
+#define S2DOS05_MAX_ADC_CHANNEL		8
+
+#endif /*  __LINUX_MFD_S2DOS05_H */