Message ID | 20240619102219.138927-5-jacopo.mondi@ideasonboard.com (mailing list archive) |
---|---|
State | New |
Delegated to: | Kieran Bingham |
Headers | show |
Series | drm: rcar-du: Add support for R8A779H0 | expand |
Hi Jacopo, Thank you for the patch. On Wed, Jun 19, 2024 at 12:22:18PM +0200, Jacopo Mondi wrote: > Add support for R-Car R8A779H0 V4M which has similar characteristics > as the already supported R-Car V4H R8A779G0, but with a single output > channel. > > Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> > > --- > BSP patch > https://github.com/renesas-rcar/linux-bsp/commit/f2fc3314dab2052240653c1a31ba3d7c7190038e > --- > --- > .../bindings/display/renesas,du.yaml | 1 + > drivers/gpu/drm/renesas/rcar-du/rcar_du_drv.c | 18 ++++++++++++++++++ > .../gpu/drm/renesas/rcar-du/rcar_du_group.c | 17 ++++++++++++----- > 3 files changed, 31 insertions(+), 5 deletions(-) > > diff --git a/Documentation/devicetree/bindings/display/renesas,du.yaml b/Documentation/devicetree/bindings/display/renesas,du.yaml > index c5b9e6812bce..d369953f16f7 100644 > --- a/Documentation/devicetree/bindings/display/renesas,du.yaml > +++ b/Documentation/devicetree/bindings/display/renesas,du.yaml > @@ -41,6 +41,7 @@ properties: > - renesas,du-r8a77995 # for R-Car D3 compatible DU > - renesas,du-r8a779a0 # for R-Car V3U compatible DU > - renesas,du-r8a779g0 # for R-Car V4H compatible DU > + - renesas,du-r8a779h0 # for R-Car V4M compatible DU > > reg: > maxItems: 1 This should be split to a separate patch. You need to add a conditional validation rule below to address the clocks, interrupts, ports, ... > diff --git a/drivers/gpu/drm/renesas/rcar-du/rcar_du_drv.c b/drivers/gpu/drm/renesas/rcar-du/rcar_du_drv.c > index dee530e4c8b2..a1d174b0b00b 100644 > --- a/drivers/gpu/drm/renesas/rcar-du/rcar_du_drv.c > +++ b/drivers/gpu/drm/renesas/rcar-du/rcar_du_drv.c > @@ -545,6 +545,23 @@ static const struct rcar_du_device_info rcar_du_r8a779g0_info = { > .dsi_clk_mask = BIT(1) | BIT(0), > }; > > +static const struct rcar_du_device_info rcar_du_r8a779h0_info = { > + .gen = 4, > + .features = RCAR_DU_FEATURE_CRTC_IRQ > + | RCAR_DU_FEATURE_VSP1_SOURCE > + | RCAR_DU_FEATURE_NO_BLENDING, > + .channels_mask = BIT(0), > + .routes = { > + /* R8A779H0 has a single MIPI DSI output. */ > + [RCAR_DU_OUTPUT_DSI0] = { > + .possible_crtcs = BIT(0), > + .port = 0, > + }, > + }, > + .num_rpf = 5, > + .dsi_clk_mask = BIT(0), > +}; This looks good. > + > static const struct of_device_id rcar_du_of_table[] = { > { .compatible = "renesas,du-r8a7742", .data = &rcar_du_r8a7790_info }, > { .compatible = "renesas,du-r8a7743", .data = &rzg1_du_r8a7743_info }, > @@ -571,6 +588,7 @@ static const struct of_device_id rcar_du_of_table[] = { > { .compatible = "renesas,du-r8a77995", .data = &rcar_du_r8a7799x_info }, > { .compatible = "renesas,du-r8a779a0", .data = &rcar_du_r8a779a0_info }, > { .compatible = "renesas,du-r8a779g0", .data = &rcar_du_r8a779g0_info }, > + { .compatible = "renesas,du-r8a779h0", .data = &rcar_du_r8a779h0_info }, > { } > }; > > diff --git a/drivers/gpu/drm/renesas/rcar-du/rcar_du_group.c b/drivers/gpu/drm/renesas/rcar-du/rcar_du_group.c > index 2ccd2581f544..361e1d01b817 100644 > --- a/drivers/gpu/drm/renesas/rcar-du/rcar_du_group.c > +++ b/drivers/gpu/drm/renesas/rcar-du/rcar_du_group.c > @@ -111,6 +111,8 @@ static void rcar_du_group_setup_didsr(struct rcar_du_group *rgrp) > /* > * On Gen3 dot clocks are setup through per-group registers, > * only available when the group has two channels. > + * > + * R-Car V4M (R8A779H0) has only one channel, index is == 0. Is it relevant here ? > */ > rcrtc = &rcdu->crtcs[rgrp->index * 2]; > num_crtcs = rgrp->num_crtcs; > @@ -185,11 +187,16 @@ static void rcar_du_group_setup(struct rcar_du_group *rgrp) > dorcr |= DORCR_PG1T | DORCR_DK1S | DORCR_PG1D_DS1; > rcar_du_group_write(rgrp, DORCR, dorcr); > > - /* Apply planes to CRTCs association. */ > - mutex_lock(&rgrp->lock); > - rcar_du_group_write(rgrp, DPTSR, (rgrp->dptsr_planes << 16) | > - rgrp->dptsr_planes); > - mutex_unlock(&rgrp->lock); > + /* > + * Apply planes to CRTCs association, skip for V4M which has a single > + * channel. " and doesn't implement the DPTSR register." I'm pretty sure writing it is still harmless, but... > + */ > + if (rcdu->info->gen < 4 || rgrp->num_crtcs > 1) { > + mutex_lock(&rgrp->lock); > + rcar_du_group_write(rgrp, DPTSR, (rgrp->dptsr_planes << 16) | > + rgrp->dptsr_planes); > + mutex_unlock(&rgrp->lock); > + } > } > > /*
Hi Laurent, Jacopo, On Wed, Jun 19, 2024 at 9:46 PM Laurent Pinchart <laurent.pinchart@ideasonboard.com> wrote: > On Wed, Jun 19, 2024 at 12:22:18PM +0200, Jacopo Mondi wrote: > > Add support for R-Car R8A779H0 V4M which has similar characteristics > > as the already supported R-Car V4H R8A779G0, but with a single output > > channel. > > > > Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> > > --- a/drivers/gpu/drm/renesas/rcar-du/rcar_du_group.c > > +++ b/drivers/gpu/drm/renesas/rcar-du/rcar_du_group.c > > @@ -185,11 +187,16 @@ static void rcar_du_group_setup(struct rcar_du_group *rgrp) > > dorcr |= DORCR_PG1T | DORCR_DK1S | DORCR_PG1D_DS1; > > rcar_du_group_write(rgrp, DORCR, dorcr); > > > > - /* Apply planes to CRTCs association. */ > > - mutex_lock(&rgrp->lock); > > - rcar_du_group_write(rgrp, DPTSR, (rgrp->dptsr_planes << 16) | > > - rgrp->dptsr_planes); > > - mutex_unlock(&rgrp->lock); > > + /* > > + * Apply planes to CRTCs association, skip for V4M which has a single > > + * channel. > > " and doesn't implement the DPTSR register." > > I'm pretty sure writing it is still harmless, but... > > > + */ > > + if (rcdu->info->gen < 4 || rgrp->num_crtcs > 1) { Looking at the R-Car Gen3 docs, this check seems to be wrong, and the lack of a check might have been an issue before? Seems like the register (per pair) is only present if the second CRTC of a CRTC pair is present, so R-Car V3M and V3H (single CRTC) do not have DPTSR at all, and M3-W (triple CRTC) does not have it on the second pair. M3-N does have both, as it lacks the first CRTC of second pair, but does have the second CRTC of the second pair. > > + mutex_lock(&rgrp->lock); > > + rcar_du_group_write(rgrp, DPTSR, (rgrp->dptsr_planes << 16) | > > + rgrp->dptsr_planes); > > + mutex_unlock(&rgrp->lock); > > + } > > } Gr{oetje,eeting}s, Geert
Hi Geert On Thu, Jun 20, 2024 at 02:48:49PM GMT, Geert Uytterhoeven wrote: > Hi Laurent, Jacopo, > > On Wed, Jun 19, 2024 at 9:46 PM Laurent Pinchart > <laurent.pinchart@ideasonboard.com> wrote: > > On Wed, Jun 19, 2024 at 12:22:18PM +0200, Jacopo Mondi wrote: > > > Add support for R-Car R8A779H0 V4M which has similar characteristics > > > as the already supported R-Car V4H R8A779G0, but with a single output > > > channel. > > > > > > Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> > > > > --- a/drivers/gpu/drm/renesas/rcar-du/rcar_du_group.c > > > +++ b/drivers/gpu/drm/renesas/rcar-du/rcar_du_group.c > > > @@ -185,11 +187,16 @@ static void rcar_du_group_setup(struct rcar_du_group *rgrp) > > > dorcr |= DORCR_PG1T | DORCR_DK1S | DORCR_PG1D_DS1; > > > rcar_du_group_write(rgrp, DORCR, dorcr); > > > > > > - /* Apply planes to CRTCs association. */ > > > - mutex_lock(&rgrp->lock); > > > - rcar_du_group_write(rgrp, DPTSR, (rgrp->dptsr_planes << 16) | > > > - rgrp->dptsr_planes); > > > - mutex_unlock(&rgrp->lock); > > > + /* > > > + * Apply planes to CRTCs association, skip for V4M which has a single > > > + * channel. > > > > " and doesn't implement the DPTSR register." > > > > I'm pretty sure writing it is still harmless, but... > > > > > + */ > > > + if (rcdu->info->gen < 4 || rgrp->num_crtcs > 1) { > > Looking at the R-Car Gen3 docs, this check seems to be wrong, and the > lack of a check might have been an issue before? Not sure I got from your comment what part is wrong. Reading below it seems you're suggesting that writes to DPTSR should be skipped for some Gen3 boards as well ? > > Seems like the register (per pair) is only present if the second CRTC > of a CRTC pair is present, so R-Car V3M and V3H (single CRTC) do not > have DPTSR at all, and M3-W (triple CRTC) does not have it on the > second pair. M3-N does have both, as it lacks the first CRTC of > second pair, but does have the second CRTC of the second pair. > /o\ So far however, all Gen3 SoCs you mentioned seem to work with DPTSR being written and the BSP [1] only actually skips it for V4M. What would you suggesting in this case ? Addressing gen3 as well ? That's something that would require testing on all the above boards thought. Thanks j [1] https://github.com/renesas-rcar/linux-bsp/commit/f2fc3314dab2052240653c1a31ba3d7c7190038e#diff-8bce6f4032dc891042e2561163754f49723ac119ae63df2425cc3487b432ee1cR206 > > > + mutex_lock(&rgrp->lock); > > > + rcar_du_group_write(rgrp, DPTSR, (rgrp->dptsr_planes << 16) | > > > + rgrp->dptsr_planes); > > > + mutex_unlock(&rgrp->lock); > > > + } > > > } > > Gr{oetje,eeting}s, > > Geert > > -- > Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org > > In personal conversations with technical people, I call myself a hacker. But > when I'm talking to journalists I just say "programmer" or something like that. > -- Linus Torvalds
Hi Jacopo, On Thu, Jun 20, 2024 at 6:48 PM Jacopo Mondi <jacopo.mondi@ideasonboard.com> wrote: > On Thu, Jun 20, 2024 at 02:48:49PM GMT, Geert Uytterhoeven wrote: > > On Wed, Jun 19, 2024 at 9:46 PM Laurent Pinchart > > <laurent.pinchart@ideasonboard.com> wrote: > > > On Wed, Jun 19, 2024 at 12:22:18PM +0200, Jacopo Mondi wrote: > > > > Add support for R-Car R8A779H0 V4M which has similar characteristics > > > > as the already supported R-Car V4H R8A779G0, but with a single output > > > > channel. > > > > > > > > Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> > > > > > > --- a/drivers/gpu/drm/renesas/rcar-du/rcar_du_group.c > > > > +++ b/drivers/gpu/drm/renesas/rcar-du/rcar_du_group.c > > > > @@ -185,11 +187,16 @@ static void rcar_du_group_setup(struct rcar_du_group *rgrp) > > > > dorcr |= DORCR_PG1T | DORCR_DK1S | DORCR_PG1D_DS1; > > > > rcar_du_group_write(rgrp, DORCR, dorcr); > > > > > > > > - /* Apply planes to CRTCs association. */ > > > > - mutex_lock(&rgrp->lock); > > > > - rcar_du_group_write(rgrp, DPTSR, (rgrp->dptsr_planes << 16) | > > > > - rgrp->dptsr_planes); > > > > - mutex_unlock(&rgrp->lock); > > > > + /* > > > > + * Apply planes to CRTCs association, skip for V4M which has a single > > > > + * channel. > > > > > > " and doesn't implement the DPTSR register." > > > > > > I'm pretty sure writing it is still harmless, but... > > > > > > > + */ > > > > + if (rcdu->info->gen < 4 || rgrp->num_crtcs > 1) { > > > > Looking at the R-Car Gen3 docs, this check seems to be wrong, and the > > lack of a check might have been an issue before? > > Not sure I got from your comment what part is wrong. > > Reading below it seems you're suggesting that writes to DPTSR should > be skipped for some Gen3 boards as well ? Indeed. > > Seems like the register (per pair) is only present if the second CRTC > > of a CRTC pair is present, so R-Car V3M and V3H (single CRTC) do not > > have DPTSR at all, and M3-W (triple CRTC) does not have it on the > > second pair. M3-N does have both, as it lacks the first CRTC of > > second pair, but does have the second CRTC of the second pair. > > > > /o\ > > So far however, all Gen3 SoCs you mentioned seem to work with DPTSR > being written and the BSP [1] only actually skips it for V4M. I don't doubt it works, I was just reading the documentation. Many nonexistent registers can be written zero to without ill effects... > What would you suggesting in this case ? Addressing gen3 as well ? > That's something that would require testing on all the above boards > thought. Ah, what if we could do without all this pesky testing? ;-) Gr{oetje,eeting}s, Geert
diff --git a/Documentation/devicetree/bindings/display/renesas,du.yaml b/Documentation/devicetree/bindings/display/renesas,du.yaml index c5b9e6812bce..d369953f16f7 100644 --- a/Documentation/devicetree/bindings/display/renesas,du.yaml +++ b/Documentation/devicetree/bindings/display/renesas,du.yaml @@ -41,6 +41,7 @@ properties: - renesas,du-r8a77995 # for R-Car D3 compatible DU - renesas,du-r8a779a0 # for R-Car V3U compatible DU - renesas,du-r8a779g0 # for R-Car V4H compatible DU + - renesas,du-r8a779h0 # for R-Car V4M compatible DU reg: maxItems: 1 diff --git a/drivers/gpu/drm/renesas/rcar-du/rcar_du_drv.c b/drivers/gpu/drm/renesas/rcar-du/rcar_du_drv.c index dee530e4c8b2..a1d174b0b00b 100644 --- a/drivers/gpu/drm/renesas/rcar-du/rcar_du_drv.c +++ b/drivers/gpu/drm/renesas/rcar-du/rcar_du_drv.c @@ -545,6 +545,23 @@ static const struct rcar_du_device_info rcar_du_r8a779g0_info = { .dsi_clk_mask = BIT(1) | BIT(0), }; +static const struct rcar_du_device_info rcar_du_r8a779h0_info = { + .gen = 4, + .features = RCAR_DU_FEATURE_CRTC_IRQ + | RCAR_DU_FEATURE_VSP1_SOURCE + | RCAR_DU_FEATURE_NO_BLENDING, + .channels_mask = BIT(0), + .routes = { + /* R8A779H0 has a single MIPI DSI output. */ + [RCAR_DU_OUTPUT_DSI0] = { + .possible_crtcs = BIT(0), + .port = 0, + }, + }, + .num_rpf = 5, + .dsi_clk_mask = BIT(0), +}; + static const struct of_device_id rcar_du_of_table[] = { { .compatible = "renesas,du-r8a7742", .data = &rcar_du_r8a7790_info }, { .compatible = "renesas,du-r8a7743", .data = &rzg1_du_r8a7743_info }, @@ -571,6 +588,7 @@ static const struct of_device_id rcar_du_of_table[] = { { .compatible = "renesas,du-r8a77995", .data = &rcar_du_r8a7799x_info }, { .compatible = "renesas,du-r8a779a0", .data = &rcar_du_r8a779a0_info }, { .compatible = "renesas,du-r8a779g0", .data = &rcar_du_r8a779g0_info }, + { .compatible = "renesas,du-r8a779h0", .data = &rcar_du_r8a779h0_info }, { } }; diff --git a/drivers/gpu/drm/renesas/rcar-du/rcar_du_group.c b/drivers/gpu/drm/renesas/rcar-du/rcar_du_group.c index 2ccd2581f544..361e1d01b817 100644 --- a/drivers/gpu/drm/renesas/rcar-du/rcar_du_group.c +++ b/drivers/gpu/drm/renesas/rcar-du/rcar_du_group.c @@ -111,6 +111,8 @@ static void rcar_du_group_setup_didsr(struct rcar_du_group *rgrp) /* * On Gen3 dot clocks are setup through per-group registers, * only available when the group has two channels. + * + * R-Car V4M (R8A779H0) has only one channel, index is == 0. */ rcrtc = &rcdu->crtcs[rgrp->index * 2]; num_crtcs = rgrp->num_crtcs; @@ -185,11 +187,16 @@ static void rcar_du_group_setup(struct rcar_du_group *rgrp) dorcr |= DORCR_PG1T | DORCR_DK1S | DORCR_PG1D_DS1; rcar_du_group_write(rgrp, DORCR, dorcr); - /* Apply planes to CRTCs association. */ - mutex_lock(&rgrp->lock); - rcar_du_group_write(rgrp, DPTSR, (rgrp->dptsr_planes << 16) | - rgrp->dptsr_planes); - mutex_unlock(&rgrp->lock); + /* + * Apply planes to CRTCs association, skip for V4M which has a single + * channel. + */ + if (rcdu->info->gen < 4 || rgrp->num_crtcs > 1) { + mutex_lock(&rgrp->lock); + rcar_du_group_write(rgrp, DPTSR, (rgrp->dptsr_planes << 16) | + rgrp->dptsr_planes); + mutex_unlock(&rgrp->lock); + } } /*
Add support for R-Car R8A779H0 V4M which has similar characteristics as the already supported R-Car V4H R8A779G0, but with a single output channel. Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> --- BSP patch https://github.com/renesas-rcar/linux-bsp/commit/f2fc3314dab2052240653c1a31ba3d7c7190038e --- --- .../bindings/display/renesas,du.yaml | 1 + drivers/gpu/drm/renesas/rcar-du/rcar_du_drv.c | 18 ++++++++++++++++++ .../gpu/drm/renesas/rcar-du/rcar_du_group.c | 17 ++++++++++++----- 3 files changed, 31 insertions(+), 5 deletions(-)