| Message ID | 20240621-b4-sc7180-camss-v1-1-14937929f30e@gmail.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | media: qcom: camss: Add sc7180 support | expand |
On 21/06/2024 11:40, George Chan via B4 Relay wrote: > From: George Chan <gchan9527@gmail.com> > > Add bindings for qcom,sc7180-camss in order to support the camera > subsystem for sm7125 as found in the Xiaomi Redmi 9 Pro cellphone. > > Signed-off-by: George Chan <gchan9527@gmail.com> Subject: just one media (first). No need to write media: media: ... A nit, subject: drop second/last, redundant "binding". The "dt-bindings" prefix is already stating that these are bindings. See also: https://elixir.bootlin.com/linux/v6.7-rc8/source/Documentation/devicetree/bindings/submitting-patches.rst#L18 > --- > .../bindings/media/qcom,sc7180-camss.yaml | 324 +++++++++++++++++++++ > 1 file changed, 324 insertions(+) > > diff --git a/Documentation/devicetree/bindings/media/qcom,sc7180-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sc7180-camss.yaml > new file mode 100644 > index 000000000000..4dc10c32ee9c > --- /dev/null > +++ b/Documentation/devicetree/bindings/media/qcom,sc7180-camss.yaml > @@ -0,0 +1,324 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > + > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/media/qcom,sc7180-camss.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Qualcomm CAMSS ISP What is CAMSS? > + > +maintainers: > + - Robert Foss <robert.foss@linaro.org> For sure this is not true. Robert does not work in Linaro and I doubt he cares that much about camss. > + > +description: | Do not need '|' unless you need to preserve formatting. > + The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms > + > +properties: > + compatible: > + const: qcom,sc7180-camss > + > + clocks: > + minItems: 25 Drop minItems > + maxItems: 25 > + > + clock-names: > + items: > + - const: camnoc_axi > + - const: cpas_ahb > + - const: cphy_rx_src > + - const: csi0 > + - const: csi1 > + - const: csi2 > + - const: csiphy0 > + - const: csiphy0_timer > + - const: csiphy1 > + - const: csiphy1_timer > + - const: csiphy2 > + - const: csiphy2_timer > + - const: csiphy3 > + - const: csiphy3_timer > + - const: gcc_camera_ahb > + - const: gcc_camera_axi > + - const: soc_ahb > + - const: vfe0_axi > + - const: vfe0 > + - const: vfe0_cphy_rx > + - const: vfe1_axi > + - const: vfe1 > + - const: vfe1_cphy_rx > + - const: vfe_lite > + - const: vfe_lite_cphy_rx > + > + interrupts: > + minItems: 10 Drop minItems > + maxItems: 10 > + > + interrupt-names: > + items: > + - const: csid0 > + - const: csid1 > + - const: csid2 > + - const: csiphy0 > + - const: csiphy1 > + - const: csiphy2 > + - const: csiphy3 > + - const: vfe0 > + - const: vfe1 > + - const: vfe_lite > + > + iommus: > + maxItems: 4 > + > + power-domains: > + items: > + - description: IFE0 GDSC - Image Front End, Global Distributed Switch Controller. > + - description: IFE1 GDSC - Image Front End, Global Distributed Switch Controller. > + - description: Titan GDSC - Titan ISP Block, Global Distributed Switch Controller. > + > + ports: > + $ref: /schemas/graph.yaml#/properties/ports > + > + description: > + CSI input ports. > + > + properties: > + port@0: > + $ref: /schemas/graph.yaml#/$defs/port-base > + unevaluatedProperties: false > + description: > + Input port for receiving CSI data. > + > + properties: > + endpoint: > + $ref: video-interfaces.yaml# > + unevaluatedProperties: false > + > + properties: > + data-lanes: > + minItems: 1 > + maxItems: 4 > + > + required: > + - data-lanes > + > + port@1: > + $ref: /schemas/graph.yaml#/$defs/port-base > + unevaluatedProperties: false > + description: > + Input port for receiving CSI data. > + > + properties: > + endpoint: > + $ref: video-interfaces.yaml# > + unevaluatedProperties: false > + > + properties: > + data-lanes: > + minItems: 1 > + maxItems: 4 > + > + required: > + - data-lanes > + > + port@2: > + $ref: /schemas/graph.yaml#/$defs/port-base > + unevaluatedProperties: false > + description: > + Input port for receiving CSI data. > + > + properties: > + endpoint: > + $ref: video-interfaces.yaml# > + unevaluatedProperties: false > + > + properties: > + data-lanes: > + minItems: 1 > + maxItems: 4 > + > + required: > + - data-lanes > + > + port@3: > + $ref: /schemas/graph.yaml#/$defs/port-base > + unevaluatedProperties: false > + description: > + Input port for receiving CSI data. > + > + properties: > + endpoint: > + $ref: video-interfaces.yaml# > + unevaluatedProperties: false > + > + properties: > + data-lanes: > + minItems: 1 > + maxItems: 4 > + > + required: > + - data-lanes > + > + reg: > + minItems: 10 Drop minItems > + maxItems: 10 > + > + reg-names: > + items: > + - const: csid0 > + - const: csid1 > + - const: csid2 > + - const: csiphy0 > + - const: csiphy1 > + - const: csiphy2 > + - const: csiphy3 > + - const: vfe0 > + - const: vfe1 > + - const: vfe_lite > + > + vdda-phy-supply: > + description: > + Phandle to a regulator supply to PHY core block. > + > + vdda-pll-supply: > + description: > + Phandle to 1.8V regulator supply to PHY refclk pll block. > + > +required: > + - clock-names > + - clocks > + - compatible Keep the list ordered, the same as list properties. > + - interrupt-names > + - interrupts > + - iommus > + - power-domains > + - reg > + - reg-names > + - vdda-phy-supply > + - vdda-pll-supply > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + #include <dt-bindings/clock/qcom,camcc-sc7180.h> > + #include <dt-bindings/clock/qcom,gcc-sc7180.h> > + > + soc { > + #address-cells = <2>; > + #size-cells = <2>; > + > + camss: camss@acb3000 { > + compatible = "qcom,sc7180-camss"; > + > + clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>, > + <&clock_camcc CAM_CC_CPAS_AHB_CLK>, Missed alignment with previous <. > + <&clock_camcc CAM_CC_IFE_0_CSID_CLK>, > + <&clock_camcc CAM_CC_IFE_1_CSID_CLK>, > + <&clock_camcc CAM_CC_IFE_LITE_CSID_CLK>, > + <&clock_camcc CAM_CC_CSIPHY0_CLK>, > + <&clock_camcc CAM_CC_CSI0PHYTIMER_CLK>, > + <&clock_camcc CAM_CC_CSIPHY1_CLK>, > + <&clock_camcc CAM_CC_CSI1PHYTIMER_CLK>, > + <&clock_camcc CAM_CC_CSIPHY2_CLK>, > + <&clock_camcc CAM_CC_CSI2PHYTIMER_CLK>, > + <&clock_camcc CAM_CC_CSIPHY3_CLK>, > + <&clock_camcc CAM_CC_CSI3PHYTIMER_CLK>, > + <&gcc GCC_CAMERA_AHB_CLK>, > + <&gcc GCC_CAMERA_HF_AXI_CLK>, > + <&clock_camcc CAM_CC_SOC_AHB_CLK>, > + <&clock_camcc CAM_CC_IFE_0_AXI_CLK>, > + <&clock_camcc CAM_CC_IFE_0_CLK>, > + <&clock_camcc CAM_CC_IFE_0_CPHY_RX_CLK>, > + <&clock_camcc CAM_CC_IFE_1_AXI_CLK>, > + <&clock_camcc CAM_CC_IFE_1_CLK>, > + <&clock_camcc CAM_CC_IFE_1_CPHY_RX_CLK>, > + <&clock_camcc CAM_CC_IFE_LITE_CLK>, > + <&clock_camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>; > + > + clock-names = "camnoc_axi", > + "cpas_ahb", Same problem. > + "csi0", > + "csi1", > + "csi2", > + "csiphy0", > + "csiphy0_timer", > + "csiphy1", > + "csiphy1_timer", > + "csiphy2", > + "csiphy2_timer", > + "csiphy3", > + "csiphy3_timer", > + "gcc_camera_ahb", > + "gcc_camera_axi", > + "soc_ahb", > + "vfe0_axi", > + "vfe0", > + "vfe0_cphy_rx", > + "vfe1_axi", > + "vfe1", > + "vfe1_cphy_rx", > + "vfe_lite", > + "vfe_lite_cphy_rx"; > + > + interrupts = <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>; > + > + interrupt-names = "csid0", > + "csid1", > + "csid2", > + "csiphy0", > + "csiphy1", > + "csiphy2", > + "csiphy3", > + "vfe0", > + "vfe1", > + "vfe_lite"; > + > + iommus = <&apps_smmu 0x820 0x0>, > + <&apps_smmu 0x840 0x0>, > + <&apps_smmu 0x860 0x0>; > + > + power-domains = <&camcc IFE_0_GDSC>, > + <&camcc IFE_1_GDSC>, > + <&camcc TITAN_TOP_GDSC>; > + > + reg = <0 0xacb3000 0 0x1000>, reg is always the second property. See DTS coding style. > + <0 0xacba000 0 0x1000>, > + <0 0xacc8000 0 0x1000>, > + <0 0xac65000 0 0x1000>, > + <0 0xac66000 0 0x1000>, > + <0 0xac67000 0 0x1000>, > + <0 0xac68000 0 0x1000>, > + <0 0xacaf000 0 0x4000>, > + <0 0xacb6000 0 0x4000>, > + <0 0xacc4000 0 0x4000>; > + > + reg-names = "csid0", So this will be the third property. Best regards, Krzysztof
On Fri, 21 Jun 2024 17:40:53 +0800, George Chan wrote: > Add bindings for qcom,sc7180-camss in order to support the camera > subsystem for sm7125 as found in the Xiaomi Redmi 9 Pro cellphone. > > Signed-off-by: George Chan <gchan9527@gmail.com> > --- > .../bindings/media/qcom,sc7180-camss.yaml | 324 +++++++++++++++++++++ > 1 file changed, 324 insertions(+) > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/qcom,sc7180-camss.example.dtb: camss@acb3000: clocks: [[4294967295, 6], [4294967295, 12], [4294967295, 37], [4294967295, 44], [4294967295, 50], [4294967295, 22], [4294967295, 14], [4294967295, 23], [4294967295, 16], [4294967295, 24], [4294967295, 18], [4294967295, 25], [4294967295, 20], [4294967295, 10], [4294967295, 11], [4294967295, 77], [4294967295, 33], [4294967295, 34], [4294967295, 36], [4294967295, 40], [4294967295, 41], [4294967295, 43], [4294967295, 47], [4294967295, 49]] is too short from schema $id: http://devicetree.org/schemas/media/qcom,sc7180-camss.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/qcom,sc7180-camss.example.dtb: camss@acb3000: clock-names:2: 'cphy_rx_src' was expected from schema $id: http://devicetree.org/schemas/media/qcom,sc7180-camss.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/qcom,sc7180-camss.example.dtb: camss@acb3000: clock-names:3: 'csi0' was expected from schema $id: http://devicetree.org/schemas/media/qcom,sc7180-camss.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/qcom,sc7180-camss.example.dtb: camss@acb3000: clock-names:4: 'csi1' was expected from schema $id: http://devicetree.org/schemas/media/qcom,sc7180-camss.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/qcom,sc7180-camss.example.dtb: camss@acb3000: clock-names:5: 'csi2' was expected from schema $id: http://devicetree.org/schemas/media/qcom,sc7180-camss.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/qcom,sc7180-camss.example.dtb: camss@acb3000: clock-names:6: 'csiphy0' was expected from schema $id: http://devicetree.org/schemas/media/qcom,sc7180-camss.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/qcom,sc7180-camss.example.dtb: camss@acb3000: clock-names:7: 'csiphy0_timer' was expected from schema $id: http://devicetree.org/schemas/media/qcom,sc7180-camss.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/qcom,sc7180-camss.example.dtb: camss@acb3000: clock-names:8: 'csiphy1' was expected from schema $id: http://devicetree.org/schemas/media/qcom,sc7180-camss.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/qcom,sc7180-camss.example.dtb: camss@acb3000: clock-names:9: 'csiphy1_timer' was expected from schema $id: http://devicetree.org/schemas/media/qcom,sc7180-camss.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/qcom,sc7180-camss.example.dtb: camss@acb3000: clock-names:10: 'csiphy2' was expected from schema $id: http://devicetree.org/schemas/media/qcom,sc7180-camss.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/qcom,sc7180-camss.example.dtb: camss@acb3000: clock-names:11: 'csiphy2_timer' was expected from schema $id: http://devicetree.org/schemas/media/qcom,sc7180-camss.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/qcom,sc7180-camss.example.dtb: camss@acb3000: clock-names:12: 'csiphy3' was expected from schema $id: http://devicetree.org/schemas/media/qcom,sc7180-camss.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/qcom,sc7180-camss.example.dtb: camss@acb3000: clock-names:13: 'csiphy3_timer' was expected from schema $id: http://devicetree.org/schemas/media/qcom,sc7180-camss.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/qcom,sc7180-camss.example.dtb: camss@acb3000: clock-names:14: 'gcc_camera_ahb' was expected from schema $id: http://devicetree.org/schemas/media/qcom,sc7180-camss.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/qcom,sc7180-camss.example.dtb: camss@acb3000: clock-names:15: 'gcc_camera_axi' was expected from schema $id: http://devicetree.org/schemas/media/qcom,sc7180-camss.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/qcom,sc7180-camss.example.dtb: camss@acb3000: clock-names:16: 'soc_ahb' was expected from schema $id: http://devicetree.org/schemas/media/qcom,sc7180-camss.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/qcom,sc7180-camss.example.dtb: camss@acb3000: clock-names:17: 'vfe0_axi' was expected from schema $id: http://devicetree.org/schemas/media/qcom,sc7180-camss.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/qcom,sc7180-camss.example.dtb: camss@acb3000: clock-names:18: 'vfe0' was expected from schema $id: http://devicetree.org/schemas/media/qcom,sc7180-camss.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/qcom,sc7180-camss.example.dtb: camss@acb3000: clock-names:19: 'vfe0_cphy_rx' was expected from schema $id: http://devicetree.org/schemas/media/qcom,sc7180-camss.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/qcom,sc7180-camss.example.dtb: camss@acb3000: clock-names:20: 'vfe1_axi' was expected from schema $id: http://devicetree.org/schemas/media/qcom,sc7180-camss.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/qcom,sc7180-camss.example.dtb: camss@acb3000: clock-names:21: 'vfe1' was expected from schema $id: http://devicetree.org/schemas/media/qcom,sc7180-camss.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/qcom,sc7180-camss.example.dtb: camss@acb3000: clock-names:22: 'vfe1_cphy_rx' was expected from schema $id: http://devicetree.org/schemas/media/qcom,sc7180-camss.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/qcom,sc7180-camss.example.dtb: camss@acb3000: clock-names:23: 'vfe_lite' was expected from schema $id: http://devicetree.org/schemas/media/qcom,sc7180-camss.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/qcom,sc7180-camss.example.dtb: camss@acb3000: clock-names: ['camnoc_axi', 'cpas_ahb', 'csi0', 'csi1', 'csi2', 'csiphy0', 'csiphy0_timer', 'csiphy1', 'csiphy1_timer', 'csiphy2', 'csiphy2_timer', 'csiphy3', 'csiphy3_timer', 'gcc_camera_ahb', 'gcc_camera_axi', 'soc_ahb', 'vfe0_axi', 'vfe0', 'vfe0_cphy_rx', 'vfe1_axi', 'vfe1', 'vfe1_cphy_rx', 'vfe_lite', 'vfe_lite_cphy_rx'] is too short from schema $id: http://devicetree.org/schemas/media/qcom,sc7180-camss.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/qcom,sc7180-camss.example.dtb: camss@acb3000: iommus: [[4294967295, 2080, 0], [4294967295, 2112, 0], [4294967295, 2144, 0]] is too short from schema $id: http://devicetree.org/schemas/media/qcom,sc7180-camss.yaml# doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240621-b4-sc7180-camss-v1-1-14937929f30e@gmail.com The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
On 21/06/2024 10:40, George Chan via B4 Relay wrote: > + power-domains: > + items: > + - description: IFE0 GDSC - Image Front End, Global Distributed Switch Controller. > + - description: IFE1 GDSC - Image Front End, Global Distributed Switch Controller. > + - description: Titan GDSC - Titan ISP Block, Global Distributed Switch Controller. Please name these power-domains and require them in your yaml, remembering to add them into the DTS. See Commit: d89751c61279 ("media: qcom: camss: Add support for named power-domains") --- bod
On Fri, Jun 21, 2024 at 6:02 PM Krzysztof Kozlowski <krzk@kernel.org> wrote: > > On 21/06/2024 11:40, George Chan via B4 Relay wrote: > > From: George Chan <gchan9527@gmail.com> > > > > Add bindings for qcom,sc7180-camss in order to support the camera > > subsystem for sm7125 as found in the Xiaomi Redmi 9 Pro cellphone. > > > > Signed-off-by: George Chan <gchan9527@gmail.com> > > Subject: just one media (first). No need to write media: media: ... > > > A nit, subject: drop second/last, redundant "binding". The "dt-bindings" > prefix is already stating that these are bindings. > See also: > https://elixir.bootlin.com/linux/v6.7-rc8/source/Documentation/devicetree/bindings/submitting-patches.rst#L18 I found the cause of this, see if I can fix it next round. > > +title: Qualcomm CAMSS ISP > > What is CAMSS? > No idea from an outsider, i can suggest one like "title: Qualcomm Camera SubSystem" > > + > > +maintainers: > > + - Robert Foss <robert.foss@linaro.org> > > For sure this is not true. Robert does not work in Linaro and I doubt he > cares that much about camss. > Well, i might suggest to be like below if no objection maintainers: - - Robert Foss <robert.foss@linaro.org> + - Bryan O'Donoghue <bryan.odonoghue@linaro.org> ... > > + > > +description: | > > Do not need '|' unless you need to preserve formatting. How about this? I have no idea what this is, just modify it blindly below. -description: | +description: Then drop all "minItems" ... > > +required: > > + - clock-names > > + - clocks > > + - compatible > > Keep the list ordered, the same as list properties. Sure for this "required" list ... > > Missed alignment with previous <. > Sure ... > > + reg = <0 0xacb3000 0 0x1000>, > > reg is always the second property. See DTS coding style. > ... > > + reg-names = "csid0", > > So this will be the third property. > > > > Best regards, > Krzysztof > Best regards, George
On Fri, Jun 21, 2024 at 7:24 PM Bryan O'Donoghue <bryan.odonoghue@linaro.org> wrote: > > On 21/06/2024 10:40, George Chan via B4 Relay wrote: > > + power-domains: > > + items: > > + - description: IFE0 GDSC - Image Front End, Global Distributed Switch Controller. > > + - description: IFE1 GDSC - Image Front End, Global Distributed Switch Controller. > > + - description: Titan GDSC - Titan ISP Block, Global Distributed Switch Controller. > > Please name these power-domains and require them in your yaml, > remembering to add them into the DTS. I can borrow the idea from sdm845-venus-v2 @@ -191,6 +190,7 @@ required: - interrupts - iommus - power-domains + - power-domain-names - reg ... + power-domain-names = "ife0", + "ife1", + "top"; I can confirm sc7180 will be the first one to have "power-domain-names" property on camss node amongst SOCs. > > --- > bod
On 22/06/2024 16:31, george chan wrote: > On Fri, Jun 21, 2024 at 7:24 PM Bryan O'Donoghue > <bryan.odonoghue@linaro.org> wrote: >> >> On 21/06/2024 10:40, George Chan via B4 Relay wrote: >>> + power-domains: >>> + items: >>> + - description: IFE0 GDSC - Image Front End, Global Distributed Switch Controller. >>> + - description: IFE1 GDSC - Image Front End, Global Distributed Switch Controller. >>> + - description: Titan GDSC - Titan ISP Block, Global Distributed Switch Controller. >> >> Please name these power-domains and require them in your yaml, >> remembering to add them into the DTS. > > I can borrow the idea from sdm845-venus-v2 > > @@ -191,6 +190,7 @@ required: > - interrupts > - iommus > - power-domains > + - power-domain-names > - reg > ... > + power-domain-names = "ife0", > + "ife1", > + "top"; Something like this https://git.codelinaro.org/bryan.odonoghue/kernel/-/commit/7626cd2a2a509832c214e538827b91c5dbf1bf09 --- bod
On Sun, Jun 23, 2024 at 7:10 PM Bryan O'Donoghue <bryan.odonoghue@linaro.org> wrote: > > Something like this > > https://git.codelinaro.org/bryan.odonoghue/kernel/-/commit/7626cd2a2a509832c214e538827b91c5dbf1bf09 > Nice, see if sc7180 is the first-runner-up patch hitting the mainline.
diff --git a/Documentation/devicetree/bindings/media/qcom,sc7180-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sc7180-camss.yaml new file mode 100644 index 000000000000..4dc10c32ee9c --- /dev/null +++ b/Documentation/devicetree/bindings/media/qcom,sc7180-camss.yaml @@ -0,0 +1,324 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) + +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/qcom,sc7180-camss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm CAMSS ISP + +maintainers: + - Robert Foss <robert.foss@linaro.org> + +description: | + The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms + +properties: + compatible: + const: qcom,sc7180-camss + + clocks: + minItems: 25 + maxItems: 25 + + clock-names: + items: + - const: camnoc_axi + - const: cpas_ahb + - const: cphy_rx_src + - const: csi0 + - const: csi1 + - const: csi2 + - const: csiphy0 + - const: csiphy0_timer + - const: csiphy1 + - const: csiphy1_timer + - const: csiphy2 + - const: csiphy2_timer + - const: csiphy3 + - const: csiphy3_timer + - const: gcc_camera_ahb + - const: gcc_camera_axi + - const: soc_ahb + - const: vfe0_axi + - const: vfe0 + - const: vfe0_cphy_rx + - const: vfe1_axi + - const: vfe1 + - const: vfe1_cphy_rx + - const: vfe_lite + - const: vfe_lite_cphy_rx + + interrupts: + minItems: 10 + maxItems: 10 + + interrupt-names: + items: + - const: csid0 + - const: csid1 + - const: csid2 + - const: csiphy0 + - const: csiphy1 + - const: csiphy2 + - const: csiphy3 + - const: vfe0 + - const: vfe1 + - const: vfe_lite + + iommus: + maxItems: 4 + + power-domains: + items: + - description: IFE0 GDSC - Image Front End, Global Distributed Switch Controller. + - description: IFE1 GDSC - Image Front End, Global Distributed Switch Controller. + - description: Titan GDSC - Titan ISP Block, Global Distributed Switch Controller. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + description: + CSI input ports. + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port for receiving CSI data. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + minItems: 1 + maxItems: 4 + + required: + - data-lanes + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port for receiving CSI data. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + minItems: 1 + maxItems: 4 + + required: + - data-lanes + + port@2: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port for receiving CSI data. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + minItems: 1 + maxItems: 4 + + required: + - data-lanes + + port@3: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port for receiving CSI data. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + minItems: 1 + maxItems: 4 + + required: + - data-lanes + + reg: + minItems: 10 + maxItems: 10 + + reg-names: + items: + - const: csid0 + - const: csid1 + - const: csid2 + - const: csiphy0 + - const: csiphy1 + - const: csiphy2 + - const: csiphy3 + - const: vfe0 + - const: vfe1 + - const: vfe_lite + + vdda-phy-supply: + description: + Phandle to a regulator supply to PHY core block. + + vdda-pll-supply: + description: + Phandle to 1.8V regulator supply to PHY refclk pll block. + +required: + - clock-names + - clocks + - compatible + - interrupt-names + - interrupts + - iommus + - power-domains + - reg + - reg-names + - vdda-phy-supply + - vdda-pll-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/qcom,camcc-sc7180.h> + #include <dt-bindings/clock/qcom,gcc-sc7180.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + camss: camss@acb3000 { + compatible = "qcom,sc7180-camss"; + + clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>, + <&clock_camcc CAM_CC_CPAS_AHB_CLK>, + <&clock_camcc CAM_CC_IFE_0_CSID_CLK>, + <&clock_camcc CAM_CC_IFE_1_CSID_CLK>, + <&clock_camcc CAM_CC_IFE_LITE_CSID_CLK>, + <&clock_camcc CAM_CC_CSIPHY0_CLK>, + <&clock_camcc CAM_CC_CSI0PHYTIMER_CLK>, + <&clock_camcc CAM_CC_CSIPHY1_CLK>, + <&clock_camcc CAM_CC_CSI1PHYTIMER_CLK>, + <&clock_camcc CAM_CC_CSIPHY2_CLK>, + <&clock_camcc CAM_CC_CSI2PHYTIMER_CLK>, + <&clock_camcc CAM_CC_CSIPHY3_CLK>, + <&clock_camcc CAM_CC_CSI3PHYTIMER_CLK>, + <&gcc GCC_CAMERA_AHB_CLK>, + <&gcc GCC_CAMERA_HF_AXI_CLK>, + <&clock_camcc CAM_CC_SOC_AHB_CLK>, + <&clock_camcc CAM_CC_IFE_0_AXI_CLK>, + <&clock_camcc CAM_CC_IFE_0_CLK>, + <&clock_camcc CAM_CC_IFE_0_CPHY_RX_CLK>, + <&clock_camcc CAM_CC_IFE_1_AXI_CLK>, + <&clock_camcc CAM_CC_IFE_1_CLK>, + <&clock_camcc CAM_CC_IFE_1_CPHY_RX_CLK>, + <&clock_camcc CAM_CC_IFE_LITE_CLK>, + <&clock_camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>; + + clock-names = "camnoc_axi", + "cpas_ahb", + "csi0", + "csi1", + "csi2", + "csiphy0", + "csiphy0_timer", + "csiphy1", + "csiphy1_timer", + "csiphy2", + "csiphy2_timer", + "csiphy3", + "csiphy3_timer", + "gcc_camera_ahb", + "gcc_camera_axi", + "soc_ahb", + "vfe0_axi", + "vfe0", + "vfe0_cphy_rx", + "vfe1_axi", + "vfe1", + "vfe1_cphy_rx", + "vfe_lite", + "vfe_lite_cphy_rx"; + + interrupts = <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>; + + interrupt-names = "csid0", + "csid1", + "csid2", + "csiphy0", + "csiphy1", + "csiphy2", + "csiphy3", + "vfe0", + "vfe1", + "vfe_lite"; + + iommus = <&apps_smmu 0x820 0x0>, + <&apps_smmu 0x840 0x0>, + <&apps_smmu 0x860 0x0>; + + power-domains = <&camcc IFE_0_GDSC>, + <&camcc IFE_1_GDSC>, + <&camcc TITAN_TOP_GDSC>; + + reg = <0 0xacb3000 0 0x1000>, + <0 0xacba000 0 0x1000>, + <0 0xacc8000 0 0x1000>, + <0 0xac65000 0 0x1000>, + <0 0xac66000 0 0x1000>, + <0 0xac67000 0 0x1000>, + <0 0xac68000 0 0x1000>, + <0 0xacaf000 0 0x4000>, + <0 0xacb6000 0 0x4000>, + <0 0xacc4000 0 0x4000>; + + reg-names = "csid0", + "csid1", + "csid2", + "csiphy0", + "csiphy1", + "csiphy2", + "csiphy3", + "vfe0", + "vfe1", + "vfe_lite"; + + vdda-phy-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l26a_1p2>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + };