diff mbox series

[net-next,v8,04/13] net: phy: mediatek: Improve readability of mtk-phy-lib.c's mtk_phy_led_hw_ctrl_set()

Message ID 20240621122045.30732-5-SkyLake.Huang@mediatek.com (mailing list archive)
State New, archived
Headers show
Series net: phy: mediatek: Introduce mtk-phy-lib and add 2.5Gphy support | expand

Commit Message

Sky Huang June 21, 2024, 12:20 p.m. UTC 
From: "SkyLake.Huang" <skylake.huang@mediatek.com>

This patch removes parens around TRIGGER_NETDEV_RX/TRIGGER_NETDEV_TX in
mtk_phy_led_hw_ctrl_set(), which improves readability.

Signed-off-by: SkyLake.Huang <skylake.huang@mediatek.com>
---
 drivers/net/phy/mediatek/mtk-phy-lib.c | 44 ++++++++++++++------------
 1 file changed, 24 insertions(+), 20 deletions(-)

Comments

Andrew Lunn June 22, 2024, 5:17 p.m. UTC | #1 
On Fri, Jun 21, 2024 at 08:20:36PM +0800, Sky Huang wrote:
> From: "SkyLake.Huang" <skylake.huang@mediatek.com>
> 
> This patch removes parens around TRIGGER_NETDEV_RX/TRIGGER_NETDEV_TX in
> mtk_phy_led_hw_ctrl_set(), which improves readability.
> 
> Signed-off-by: SkyLake.Huang <skylake.huang@mediatek.com>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew
diff mbox series

Patch

diff --git a/drivers/net/phy/mediatek/mtk-phy-lib.c b/drivers/net/phy/mediatek/mtk-phy-lib.c
index 16b2794..f9d05f3 100644
--- a/drivers/net/phy/mediatek/mtk-phy-lib.c
+++ b/drivers/net/phy/mediatek/mtk-phy-lib.c
@@ -127,29 +127,33 @@  int mtk_phy_led_hw_ctrl_set(struct phy_device *phydev, u8 index,
 		on |= MTK_PHY_LED_ON_LINK2500;
 
 	if (rules & BIT(TRIGGER_NETDEV_RX)) {
-		blink |= (on & on_set) ?
-			  (((on & MTK_PHY_LED_ON_LINK10) ?
-			    MTK_PHY_LED_BLINK_10RX : 0) |
-			   ((on & MTK_PHY_LED_ON_LINK100) ?
-			    MTK_PHY_LED_BLINK_100RX : 0) |
-			   ((on & MTK_PHY_LED_ON_LINK1000) ?
-			    MTK_PHY_LED_BLINK_1000RX : 0) |
-			   ((on & MTK_PHY_LED_ON_LINK2500) ?
-			    MTK_PHY_LED_BLINK_2500RX : 0)) :
-			  rx_blink_set;
+		if (on & on_set) {
+			if (on & MTK_PHY_LED_ON_LINK10)
+				blink |= MTK_PHY_LED_BLINK_10RX;
+			if (on & MTK_PHY_LED_ON_LINK100)
+				blink |= MTK_PHY_LED_BLINK_100RX;
+			if (on & MTK_PHY_LED_ON_LINK1000)
+				blink |= MTK_PHY_LED_BLINK_1000RX;
+			if (on & MTK_PHY_LED_ON_LINK2500)
+				blink |= MTK_PHY_LED_BLINK_2500RX;
+		} else {
+			blink |= rx_blink_set;
+		}
 	}
 
 	if (rules & BIT(TRIGGER_NETDEV_TX)) {
-		blink |= (on & on_set) ?
-			  (((on & MTK_PHY_LED_ON_LINK10) ?
-			    MTK_PHY_LED_BLINK_10TX : 0) |
-			   ((on & MTK_PHY_LED_ON_LINK100) ?
-			    MTK_PHY_LED_BLINK_100TX : 0) |
-			   ((on & MTK_PHY_LED_ON_LINK1000) ?
-			    MTK_PHY_LED_BLINK_1000TX : 0) |
-			   ((on & MTK_PHY_LED_ON_LINK2500) ?
-			    MTK_PHY_LED_BLINK_2500TX : 0)) :
-			  tx_blink_set;
+		if (on & on_set) {
+			if (on & MTK_PHY_LED_ON_LINK10)
+				blink |= MTK_PHY_LED_BLINK_10TX;
+			if (on & MTK_PHY_LED_ON_LINK100)
+				blink |= MTK_PHY_LED_BLINK_100TX;
+			if (on & MTK_PHY_LED_ON_LINK1000)
+				blink |= MTK_PHY_LED_BLINK_1000TX;
+			if (on & MTK_PHY_LED_ON_LINK2500)
+				blink |= MTK_PHY_LED_BLINK_2500TX;
+		} else {
+			blink |= tx_blink_set;
+		}
 	}
 
 	if (blink || on)