diff mbox series

[5/7] drm/panel: add driver for samsung amb655x

Message ID 20240624-oneplus8-v1-5-388eecf2dff7@postmarketos.org (mailing list archive)
State Superseded
Headers show
Series qcom: initial support for the OnePlus 8T | expand

Commit Message

Caleb Connolly June 24, 2024, 1:30 a.m. UTC
This is a 1080x2400 120hz panel used on the OnePlus 8T. It uses DSC but
uses non-standard DCS commands.

Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
---
 MAINTAINERS                                   |   7 +
 drivers/gpu/drm/panel/Kconfig                 |   9 +
 drivers/gpu/drm/panel/Makefile                |   1 +
 drivers/gpu/drm/panel/panel-samsung-amb655x.c | 420 ++++++++++++++++++++++++++
 4 files changed, 437 insertions(+)

Comments

Dmitry Baryshkov June 24, 2024, 5:31 a.m. UTC | #1
On Mon, Jun 24, 2024 at 03:30:29AM GMT, Caleb Connolly wrote:
> This is a 1080x2400 120hz panel used on the OnePlus 8T. It uses DSC but
> uses non-standard DCS commands.

Please add a note regarding the panel using long packets for all the
commands.

Also the cover letter had a mention of the panel not fully comming up
after being reset, is that still true? If so, it should be mentioned in
the commit message too.

> Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
> ---
>  MAINTAINERS                                   |   7 +
>  drivers/gpu/drm/panel/Kconfig                 |   9 +
>  drivers/gpu/drm/panel/Makefile                |   1 +
>  drivers/gpu/drm/panel/panel-samsung-amb655x.c | 420 ++++++++++++++++++++++++++
>  4 files changed, 437 insertions(+)



> +static int samsung_amb655x_on(struct samsung_amb655x *amb655x)
> +{
> +	struct drm_dsc_picture_parameter_set pps;
> +	struct mipi_dsi_device *dsi = amb655x->dsi;
> +	struct mipi_dsi_multi_context ctx = { .dsi = dsi };
> +	struct device *dev = &dsi->dev;
> +	int ret;
> +
> +	dsi->mode_flags |= MIPI_DSI_MODE_LPM;
> +
> +	drm_dsc_pps_payload_pack(&pps, &amb655x->dsc);
> +
> +	mipi_dsi_dcs_write_long(&ctx, 0xf0, 0x5a, 0x5a);
> +	mipi_dsi_dcs_write_buffer_multi(&ctx, &pps, sizeof(pps));
> +	mipi_dsi_dcs_write_long(&ctx, 0x9d, 0x01);
> +	mipi_dsi_dcs_write_long(&ctx, 0xf0, 0xa5, 0xa5);
> +
> +	ret = mipi_dsi_dcs_exit_sleep_mode(dsi);

_multi. Shouldn't it be a long package too?

> +	if (ret < 0) {
> +		dev_err(dev, "Failed to exit sleep mode: %d\n", ret);
> +		return ret;
> +	}
> +	usleep_range(11000, 12000);

mipi_dsi_msleep() or add mipi_dsi_usleep_range().

> +	ret = mipi_dsi_dcs_set_column_address(dsi, 0x0000, 1080 - 1);

_multi, adding the function as required

> +	if (ret < 0) {
> +		dev_err(dev, "Failed to set column address: %d\n", ret);
> +		return ret;
> +	}
> +
> +	ret = mipi_dsi_dcs_set_page_address(dsi, 0x0000, 2400 - 1);

_multi

> +	if (ret < 0) {
> +		dev_err(dev, "Failed to set page address: %d\n", ret);
> +		return ret;
> +	}
> +
> +	/* FD Setting */
> +	mipi_dsi_dcs_write_long(&ctx, 0xf0, 0x5a, 0x5a);
> +	mipi_dsi_dcs_write_long(&ctx, 0xd5, 0x8d);
> +	mipi_dsi_dcs_write_long(&ctx, 0xb0, 0x0a);
> +	mipi_dsi_dcs_write_long(&ctx, 0xd5, 0x05);
> +	mipi_dsi_dcs_write_long(&ctx, 0xf0, 0xa5, 0xa5);
> +
> +	/* FFC Function */
> +	mipi_dsi_dcs_write_long(&ctx, 0xfc, 0x5a, 0x5a);
> +	mipi_dsi_dcs_write_long(&ctx, 0xb0, 0x01);
> +	mipi_dsi_dcs_write_long(&ctx, 0xe4, 0xa6, 0x75, 0xa3);
> +	mipi_dsi_dcs_write_long(&ctx, 0xe9,
> +			       0x11, 0x75, 0xa6, 0x75, 0xa3, 0x4b, 0x17, 0xac,
> +			       0x4b, 0x17, 0xac, 0x00, 0x19, 0x19);
> +	mipi_dsi_dcs_write_long(&ctx, 0xfc, 0xa5, 0xa5);
> +	msleep(61);

mipi_dsi_msleep

> +
> +	/* Dimming Setting */
> +	mipi_dsi_dcs_write_long(&ctx, 0xf0, 0x5a, 0x5a);
> +	mipi_dsi_dcs_write_long(&ctx, 0xb0, 0x06);
> +	mipi_dsi_dcs_write_long(&ctx, 0xb7, 0x01);
> +	mipi_dsi_dcs_write_long(&ctx, 0xb0, 0x05);
> +	mipi_dsi_dcs_write_long(&ctx, 0xb7, 0x13);
> +	mipi_dsi_dcs_write_long(&ctx, 0xb0, 0x01);
> +	mipi_dsi_dcs_write_long(&ctx, 0xb7, 0x4c);
> +	mipi_dsi_dcs_write_long(&ctx, 0xf0, 0xa5, 0xa5);
> +
> +	mipi_dsi_dcs_write_long(&ctx, MIPI_DCS_WRITE_CONTROL_DISPLAY, 0x20);
> +
> +	/* refresh rate Transition */
> +	mipi_dsi_dcs_write_long(&ctx, 0xf0, 0x5a, 0x5a);
> +	/* 60 Hz */
> +	//mipi_dsi_dcs_write_long(&ctx, 0x60, 0x00);
> +	/* 120 Hz */
> +	mipi_dsi_dcs_write_long(&ctx, 0x60, 0x10);
> +
> +	mipi_dsi_dcs_write_long(&ctx, 0xf0, 0xa5, 0xa5);
> +
> +	/* ACL Mode */
> +	mipi_dsi_dcs_write_long(&ctx, 0xf0, 0x5a, 0x5a);
> +	mipi_dsi_dcs_write_long(&ctx, MIPI_DCS_WRITE_POWER_SAVE, 0x00);
> +	mipi_dsi_dcs_write_long(&ctx, 0xf0, 0xa5, 0xa5);
> +	mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_CONTROL_DISPLAY, 0x20);

_multi

> +	msleep(110);

mipi_dsi_msleep()

> +
> +	/* Enable backlight */
> +	mipi_dsi_dcs_write_long(&ctx, 0x9F, 0x5A, 0x5A);
> +	mipi_dsi_dcs_set_display_on(dsi);

_multi

> +	mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_ENTER_NORMAL_MODE);

_multi

> +	mipi_dsi_dcs_write_long(&ctx, 0x9F, 0xA5, 0xA5);
> +
> +	return ctx.accum_err;
> +}
> +
> +static int samsung_amb655x_off(struct samsung_amb655x *amb655x)
> +{
> +	struct mipi_dsi_device *dsi = amb655x->dsi;
> +	struct mipi_dsi_multi_context ctx = { .dsi = dsi };
> +	struct device *dev = &dsi->dev;
> +	int ret;
> +
> +	dsi->mode_flags |= MIPI_DSI_MODE_LPM;
> +
> +	mipi_dsi_dcs_write_long(&ctx, 0x9f, 0x5a, 0x5a);
> +
> +	ret = mipi_dsi_dcs_set_display_on(dsi);

_multi

> +	if (ret < 0) {
> +		dev_err(dev, "Failed to set display on: %d\n", ret);
> +		return ret;
> +	}
> +	msleep(20);

mipi_dsi_msleep

> +
> +	ret = mipi_dsi_dcs_set_display_off(dsi);

_multi

> +	if (ret < 0) {
> +		dev_err(dev, "Failed to set display off: %d\n", ret);
> +		return ret;
> +	}
> +	msleep(20);

mipi_dsi_msleep
> +
> +	ret = mipi_dsi_dcs_enter_sleep_mode(dsi);

_multi

> +	if (ret < 0) {
> +		dev_err(dev, "Failed to enter sleep mode: %d\n", ret);
> +		return ret;
> +	}
> +
> +	mipi_dsi_dcs_write_long(&ctx, 0x9f, 0xa5, 0xa5);
> +	msleep(150);
> +
> +	return ctx.accum_err;
> +}
> +
diff mbox series

Patch

diff --git a/MAINTAINERS b/MAINTAINERS
index 807feae089c4..2b9cfbf92d7a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -7142,8 +7142,15 @@  M:	Robert Chiras <robert.chiras@nxp.com>
 S:	Maintained
 F:	Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml
 F:	drivers/gpu/drm/panel/panel-raydium-rm67191.c
 
+DRM DRIVER FOR SAMSUNG AMB655X PANEL
+M:	Caleb Connolly <caleb@postmarketos.org>
+S:	Maintained
+T:	git https://gitlab.freedesktop.org/drm/misc/kernel.git
+F:	Documentation/devicetree/bindings/display/panel/samsung,amb655x.yaml
+F:	drivers/gpu/drm/panel/panel-samsung-amb655x.c
+
 DRM DRIVER FOR SAMSUNG DB7430 PANELS
 M:	Linus Walleij <linus.walleij@linaro.org>
 S:	Maintained
 T:	git https://gitlab.freedesktop.org/drm/misc/kernel.git
diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index bf4eadfe21cb..7203d16ab20a 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -590,8 +590,17 @@  config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01
 	depends on OF
 	select DRM_MIPI_DSI
 	select VIDEOMODE_HELPERS
 
+config DRM_PANEL_SAMSUNG_AMB655X
+	tristate "Samsung AMB655X DSI panel"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  DRM panel driver for the Samsung AMB655X panel.
+	  This panel has a resolution of 1080x2400 @ 60hz or 120Hz.
+
 config DRM_PANEL_SAMSUNG_ATNA33XC20
 	tristate "Samsung ATNA33XC20 eDP panel"
 	depends on OF
 	depends on BACKLIGHT_CLASS_DEVICE
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
index 051b75b3df7b..be6d500a56a4 100644
--- a/drivers/gpu/drm/panel/Makefile
+++ b/drivers/gpu/drm/panel/Makefile
@@ -58,8 +58,9 @@  obj-$(CONFIG_DRM_PANEL_RAYDIUM_RM67191) += panel-raydium-rm67191.o
 obj-$(CONFIG_DRM_PANEL_RAYDIUM_RM68200) += panel-raydium-rm68200.o
 obj-$(CONFIG_DRM_PANEL_RAYDIUM_RM692E5) += panel-raydium-rm692e5.o
 obj-$(CONFIG_DRM_PANEL_RAYDIUM_RM69380) += panel-raydium-rm69380.o
 obj-$(CONFIG_DRM_PANEL_RONBO_RB070D30) += panel-ronbo-rb070d30.o
+obj-$(CONFIG_DRM_PANEL_SAMSUNG_AMB655X) += panel-samsung-amb655x.o
 obj-$(CONFIG_DRM_PANEL_SAMSUNG_ATNA33XC20) += panel-samsung-atna33xc20.o
 obj-$(CONFIG_DRM_PANEL_SAMSUNG_DB7430) += panel-samsung-db7430.o
 obj-$(CONFIG_DRM_PANEL_SAMSUNG_LD9040) += panel-samsung-ld9040.o
 obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6D16D0) += panel-samsung-s6d16d0.o
diff --git a/drivers/gpu/drm/panel/panel-samsung-amb655x.c b/drivers/gpu/drm/panel/panel-samsung-amb655x.c
new file mode 100644
index 000000000000..2af89bfd798a
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-samsung-amb655x.c
@@ -0,0 +1,420 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+// Generated with linux-mdss-dsi-panel-driver-generator from vendor device tree:
+//   Copyright (c) 2015-2017, The Linux Foundation. All rights reserved.
+//   Copyright (c) 2024 Caleb Connolly <caleb@postmarketos.org>
+
+
+#include <linux/backlight.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/of.h>
+
+#include <video/mipi_display.h>
+
+#include <drm/display/drm_dsc.h>
+#include <drm/display/drm_dsc_helper.h>
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_panel.h>
+
+struct samsung_amb655x {
+	struct drm_panel panel;
+	struct mipi_dsi_device *dsi;
+	struct drm_dsc_config dsc;
+	struct gpio_desc *reset_gpio;
+	struct regulator_bulk_data supplies[3];
+};
+
+static inline
+struct samsung_amb655x *to_samsung_amb655x(struct drm_panel *panel)
+{
+	return container_of(panel, struct samsung_amb655x, panel);
+}
+
+static void samsung_amb655x_reset(struct samsung_amb655x *amb655x)
+{
+	gpiod_set_value_cansleep(amb655x->reset_gpio, 0);
+	usleep_range(10000, 11000);
+	gpiod_set_value_cansleep(amb655x->reset_gpio, 1);
+	usleep_range(1000, 2000);
+	gpiod_set_value_cansleep(amb655x->reset_gpio, 0);
+	usleep_range(10000, 11000);
+}
+
+static int samsung_amb655x_on(struct samsung_amb655x *amb655x)
+{
+	struct drm_dsc_picture_parameter_set pps;
+	struct mipi_dsi_device *dsi = amb655x->dsi;
+	struct mipi_dsi_multi_context ctx = { .dsi = dsi };
+	struct device *dev = &dsi->dev;
+	int ret;
+
+	dsi->mode_flags |= MIPI_DSI_MODE_LPM;
+
+	drm_dsc_pps_payload_pack(&pps, &amb655x->dsc);
+
+	mipi_dsi_dcs_write_long(&ctx, 0xf0, 0x5a, 0x5a);
+	mipi_dsi_dcs_write_buffer_multi(&ctx, &pps, sizeof(pps));
+	mipi_dsi_dcs_write_long(&ctx, 0x9d, 0x01);
+	mipi_dsi_dcs_write_long(&ctx, 0xf0, 0xa5, 0xa5);
+
+	ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
+	if (ret < 0) {
+		dev_err(dev, "Failed to exit sleep mode: %d\n", ret);
+		return ret;
+	}
+	usleep_range(11000, 12000);
+
+	/* VLIN CURRENT LIMIT */
+	mipi_dsi_dcs_write_long(&ctx, 0xf0, 0x5a, 0x5a);
+	mipi_dsi_dcs_write_long(&ctx, 0xb0, 0x04);
+	mipi_dsi_dcs_write_long(&ctx, 0xd5, 0x24, 0x9e, 0x9e, 0x00, 0x20);
+	mipi_dsi_dcs_write_long(&ctx, 0xf0, 0xa5, 0xa5);
+
+	/* OSC Select */
+	mipi_dsi_dcs_write_long(&ctx, 0xf0, 0x5a, 0x5a);
+	mipi_dsi_dcs_write_long(&ctx, 0xfc, 0x5a, 0x5a);
+	mipi_dsi_dcs_write_long(&ctx, 0xb0, 0x16);
+	mipi_dsi_dcs_write_long(&ctx, 0xd1, 0x22);
+	mipi_dsi_dcs_write_long(&ctx, 0xd6, 0x11);
+	mipi_dsi_dcs_write_long(&ctx, 0xfc, 0xa5, 0xa5);
+	mipi_dsi_dcs_write_long(&ctx, 0xf0, 0xa5, 0xa5);
+
+	/* TE ON */
+	mipi_dsi_dcs_write_long(&ctx, 0xf0, 0x5a, 0x5a);
+	mipi_dsi_dcs_write_long(&ctx, MIPI_DCS_SET_TEAR_ON, MIPI_DSI_DCS_TEAR_MODE_VBLANK);
+	mipi_dsi_dcs_write_long(&ctx, 0xf0, 0xa5, 0xa5);
+
+	/* TSP Setting */
+	mipi_dsi_dcs_write_long(&ctx, 0xf0, 0x5a, 0x5a);
+	mipi_dsi_dcs_write_long(&ctx, 0xdf, 0x83, 0x00, 0x10);
+	mipi_dsi_dcs_write_long(&ctx, 0xb0, 0x01);
+	mipi_dsi_dcs_write_long(&ctx, 0xe6, 0x01);
+	mipi_dsi_dcs_write_long(&ctx, 0xf0, 0xa5, 0xa5);
+
+	ret = mipi_dsi_dcs_set_column_address(dsi, 0x0000, 1080 - 1);
+	if (ret < 0) {
+		dev_err(dev, "Failed to set column address: %d\n", ret);
+		return ret;
+	}
+
+	ret = mipi_dsi_dcs_set_page_address(dsi, 0x0000, 2400 - 1);
+	if (ret < 0) {
+		dev_err(dev, "Failed to set page address: %d\n", ret);
+		return ret;
+	}
+
+	/* FD Setting */
+	mipi_dsi_dcs_write_long(&ctx, 0xf0, 0x5a, 0x5a);
+	mipi_dsi_dcs_write_long(&ctx, 0xd5, 0x8d);
+	mipi_dsi_dcs_write_long(&ctx, 0xb0, 0x0a);
+	mipi_dsi_dcs_write_long(&ctx, 0xd5, 0x05);
+	mipi_dsi_dcs_write_long(&ctx, 0xf0, 0xa5, 0xa5);
+
+	/* FFC Function */
+	mipi_dsi_dcs_write_long(&ctx, 0xfc, 0x5a, 0x5a);
+	mipi_dsi_dcs_write_long(&ctx, 0xb0, 0x01);
+	mipi_dsi_dcs_write_long(&ctx, 0xe4, 0xa6, 0x75, 0xa3);
+	mipi_dsi_dcs_write_long(&ctx, 0xe9,
+			       0x11, 0x75, 0xa6, 0x75, 0xa3, 0x4b, 0x17, 0xac,
+			       0x4b, 0x17, 0xac, 0x00, 0x19, 0x19);
+	mipi_dsi_dcs_write_long(&ctx, 0xfc, 0xa5, 0xa5);
+	msleep(61);
+
+	/* Dimming Setting */
+	mipi_dsi_dcs_write_long(&ctx, 0xf0, 0x5a, 0x5a);
+	mipi_dsi_dcs_write_long(&ctx, 0xb0, 0x06);
+	mipi_dsi_dcs_write_long(&ctx, 0xb7, 0x01);
+	mipi_dsi_dcs_write_long(&ctx, 0xb0, 0x05);
+	mipi_dsi_dcs_write_long(&ctx, 0xb7, 0x13);
+	mipi_dsi_dcs_write_long(&ctx, 0xb0, 0x01);
+	mipi_dsi_dcs_write_long(&ctx, 0xb7, 0x4c);
+	mipi_dsi_dcs_write_long(&ctx, 0xf0, 0xa5, 0xa5);
+
+	mipi_dsi_dcs_write_long(&ctx, MIPI_DCS_WRITE_CONTROL_DISPLAY, 0x20);
+
+	/* refresh rate Transition */
+	mipi_dsi_dcs_write_long(&ctx, 0xf0, 0x5a, 0x5a);
+	/* 60 Hz */
+	//mipi_dsi_dcs_write_long(&ctx, 0x60, 0x00);
+	/* 120 Hz */
+	mipi_dsi_dcs_write_long(&ctx, 0x60, 0x10);
+
+	mipi_dsi_dcs_write_long(&ctx, 0xf0, 0xa5, 0xa5);
+
+	/* ACL Mode */
+	mipi_dsi_dcs_write_long(&ctx, 0xf0, 0x5a, 0x5a);
+	mipi_dsi_dcs_write_long(&ctx, MIPI_DCS_WRITE_POWER_SAVE, 0x00);
+	mipi_dsi_dcs_write_long(&ctx, 0xf0, 0xa5, 0xa5);
+	mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_CONTROL_DISPLAY, 0x20);
+	msleep(110);
+
+	/* Enable backlight */
+	mipi_dsi_dcs_write_long(&ctx, 0x9F, 0x5A, 0x5A);
+	mipi_dsi_dcs_set_display_on(dsi);
+	mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_ENTER_NORMAL_MODE);
+	mipi_dsi_dcs_write_long(&ctx, 0x9F, 0xA5, 0xA5);
+
+	return ctx.accum_err;
+}
+
+static int samsung_amb655x_off(struct samsung_amb655x *amb655x)
+{
+	struct mipi_dsi_device *dsi = amb655x->dsi;
+	struct mipi_dsi_multi_context ctx = { .dsi = dsi };
+	struct device *dev = &dsi->dev;
+	int ret;
+
+	dsi->mode_flags |= MIPI_DSI_MODE_LPM;
+
+	mipi_dsi_dcs_write_long(&ctx, 0x9f, 0x5a, 0x5a);
+
+	ret = mipi_dsi_dcs_set_display_on(dsi);
+	if (ret < 0) {
+		dev_err(dev, "Failed to set display on: %d\n", ret);
+		return ret;
+	}
+	msleep(20);
+
+	ret = mipi_dsi_dcs_set_display_off(dsi);
+	if (ret < 0) {
+		dev_err(dev, "Failed to set display off: %d\n", ret);
+		return ret;
+	}
+	msleep(20);
+
+	ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
+	if (ret < 0) {
+		dev_err(dev, "Failed to enter sleep mode: %d\n", ret);
+		return ret;
+	}
+
+	mipi_dsi_dcs_write_long(&ctx, 0x9f, 0xa5, 0xa5);
+	msleep(150);
+
+	return ctx.accum_err;
+}
+
+static int samsung_amb655x_prepare(struct drm_panel *panel)
+{
+	struct samsung_amb655x *ctx = to_samsung_amb655x(panel);
+	struct device *dev = &ctx->dsi->dev;
+	int ret;
+
+	ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
+	if (ret) {
+		dev_err(dev, "Failed to enable regulators: %d\n", ret);
+		return ret;
+	}
+
+	samsung_amb655x_reset(ctx);
+
+	ret = samsung_amb655x_on(ctx);
+	if (ret < 0) {
+		dev_err(dev, "Failed to initialize panel: %d\n", ret);
+		gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+		return ret;
+	}
+
+	msleep(28);
+
+	return 0;
+}
+
+static int samsung_amb655x_unprepare(struct drm_panel *panel)
+{
+	struct samsung_amb655x *ctx = to_samsung_amb655x(panel);
+	struct device *dev = &ctx->dsi->dev;
+	int ret;
+
+	ret = samsung_amb655x_off(ctx);
+	if (ret < 0)
+		dev_err(dev, "Failed to un-initialize panel: %d\n", ret);
+
+	gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+
+	ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
+	if (ret) {
+		dev_err(dev, "Failed to enable regulators: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct drm_display_mode samsung_amb655x_120_mode = {
+	.clock = (1080 + 52 + 24 + 24) * (2400 + 4 + 4 + 8) * 120 / 1000,
+	.hdisplay = 1080,
+	.hsync_start = 1080 + 52,
+	.hsync_end = 1080 + 52 + 24,
+	.htotal = 1080 + 52 + 24 + 24,
+	.vdisplay = 2400,
+	.vsync_start = 2400 + 4,
+	.vsync_end = 2400 + 4 + 4,
+	.vtotal = 2400 + 4 + 4 + 8,
+	.width_mm = 70,
+	.height_mm = 151,
+};
+
+static int samsung_amb655x_get_modes(struct drm_panel *panel,
+				     struct drm_connector *connector)
+{
+	struct drm_display_mode *mode;
+
+	mode = drm_mode_duplicate(connector->dev, &samsung_amb655x_120_mode);
+	if (!mode)
+		return -ENOMEM;
+
+	drm_mode_set_name(mode);
+
+	mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
+	connector->display_info.width_mm = mode->width_mm;
+	connector->display_info.height_mm = mode->height_mm;
+	drm_mode_probed_add(connector, mode);
+
+	return 1;
+}
+
+static const struct drm_panel_funcs samsung_amb655x_panel_funcs = {
+	.prepare = samsung_amb655x_prepare,
+	.unprepare = samsung_amb655x_unprepare,
+	.get_modes = samsung_amb655x_get_modes,
+};
+
+static int samsung_amb655x_bl_update_status(struct backlight_device *bl)
+{
+	struct mipi_dsi_device *dsi = bl_get_data(bl);
+	u16 brightness = backlight_get_brightness(bl);
+	int ret;
+
+	ret = mipi_dsi_dcs_set_display_brightness_large(dsi, brightness);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static const struct backlight_ops samsung_amb655x_bl_ops = {
+	.update_status = samsung_amb655x_bl_update_status,
+};
+
+static struct backlight_device *
+samsung_amb655x_create_backlight(struct mipi_dsi_device *dsi)
+{
+	struct device *dev = &dsi->dev;
+	const struct backlight_properties props = {
+		.type = BACKLIGHT_RAW,
+		.brightness = 2047,
+		.max_brightness = 2047,
+	};
+
+	return devm_backlight_device_register(dev, dev_name(dev), dev, dsi,
+					      &samsung_amb655x_bl_ops, &props);
+}
+
+static int samsung_amb655x_probe(struct mipi_dsi_device *dsi)
+{
+	struct device *dev = &dsi->dev;
+	struct samsung_amb655x *ctx;
+	int ret;
+
+	ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
+	if (!ctx)
+		return -ENOMEM;
+
+	ctx->supplies[0].supply = "vddio";
+	ctx->supplies[1].supply = "vdd";
+	ctx->supplies[2].supply = "avdd";
+
+	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ctx->supplies), ctx->supplies);
+	if (ret)
+		return dev_err_probe(dev, ret,
+				     "Failed to get vddio regulator\n");
+
+	ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
+	if (ret)
+		dev_err(dev, "Failed to enable regulators: %d\n", ret);
+
+	ctx->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(ctx->reset_gpio))
+		return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio),
+				     "Failed to get reset-gpios\n");
+
+	ctx->dsi = dsi;
+	mipi_dsi_set_drvdata(dsi, ctx);
+
+	dsi->lanes = 4;
+	dsi->format = MIPI_DSI_FMT_RGB888;
+
+	drm_panel_init(&ctx->panel, dev, &samsung_amb655x_panel_funcs,
+		       DRM_MODE_CONNECTOR_DSI);
+	ctx->panel.prepare_prev_first = true;
+
+	ctx->panel.backlight = samsung_amb655x_create_backlight(dsi);
+	if (IS_ERR(ctx->panel.backlight))
+		return dev_err_probe(dev, PTR_ERR(ctx->panel.backlight),
+				     "Failed to create backlight\n");
+
+	drm_panel_add(&ctx->panel);
+
+	/* This panel only supports DSC; unconditionally enable it */
+	dsi->dsc = &ctx->dsc;
+
+	ctx->dsc.dsc_version_major = 1;
+	ctx->dsc.dsc_version_minor = 1;
+
+	/* TODO: Pass slice_per_pkt = 2 */
+	ctx->dsc.slice_height = 30;
+	ctx->dsc.slice_width = 540;
+	/*
+	 * TODO: hdisplay should be read from the selected mode once
+	 * it is passed back to drm_panel (in prepare?)
+	 */
+	WARN_ON(1080 % ctx->dsc.slice_width);
+	ctx->dsc.slice_count = 1080 / ctx->dsc.slice_width;
+	ctx->dsc.bits_per_component = 8;
+	ctx->dsc.bits_per_pixel = 8 << 4; /* 4 fractional bits */
+	ctx->dsc.block_pred_enable = true;
+
+	ret = mipi_dsi_attach(dsi);
+	if (ret < 0) {
+		dev_err(dev, "Failed to attach to DSI host: %d\n", ret);
+		drm_panel_remove(&ctx->panel);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void samsung_amb655x_remove(struct mipi_dsi_device *dsi)
+{
+	struct samsung_amb655x *ctx = mipi_dsi_get_drvdata(dsi);
+	int ret;
+
+	ret = mipi_dsi_detach(dsi);
+	if (ret < 0)
+		dev_err(&dsi->dev, "Failed to detach from DSI host: %d\n", ret);
+
+	drm_panel_remove(&ctx->panel);
+}
+
+static const struct of_device_id samsung_amb655x_of_match[] = {
+	{ .compatible = "samsung,amb655x" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, samsung_amb655x_of_match);
+
+static struct mipi_dsi_driver samsung_amb655x_driver = {
+	.probe = samsung_amb655x_probe,
+	.remove = samsung_amb655x_remove,
+	.driver = {
+		.name = "panel-samsung-amb655x",
+		.of_match_table = samsung_amb655x_of_match,
+	},
+};
+module_mipi_dsi_driver(samsung_amb655x_driver);
+
+MODULE_AUTHOR("Caleb Connolly <caleb@postmarketos.org>");
+MODULE_DESCRIPTION("DRM driver for Samsung AMB655X DSC DSI panel");
+MODULE_LICENSE("GPL");