| Message ID | 20240613020725.27874-1-jiaxin.yu@mediatek.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [v2] ASoC: mediatek: mt6358: Add "Dmic Mode Switch" kcontrol for switch DMIC mode. | expand |
On Thu, 13 Jun 2024 10:07:25 +0800, Jiaxin Yu wrote: > There are two hardware connection methods for DMICs on the MT6358. In cases > where more than two DMICs are used, we need to time-multiplex these DMICs. > Therefore, we need to dynamically switch the modes of these DMICs based on > the actual usage scenarios. > > ---- DMIC1 > AU_VIN0 --- > ---- DMIC2 > > [...] Applied to https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next Thanks! [1/1] ASoC: mediatek: mt6358: Add "Dmic Mode Switch" kcontrol for switch DMIC mode. commit: 4ae814dabcdae3e434820c64396e15ccb33cc0ce All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark
diff --git a/sound/soc/codecs/mt6358.c b/sound/soc/codecs/mt6358.c index 0284e29c11d3..9247b90d1b99 100644 --- a/sound/soc/codecs/mt6358.c +++ b/sound/soc/codecs/mt6358.c @@ -96,7 +96,7 @@ struct mt6358_priv { int wov_enabled; - unsigned int dmic_one_wire_mode; + int dmic_one_wire_mode; }; int mt6358_set_mtkaif_protocol(struct snd_soc_component *cmpnt, @@ -577,6 +577,39 @@ static int mt6358_put_wov(struct snd_kcontrol *kcontrol, return 0; } +static int mt6358_dmic_mode_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *c = snd_soc_kcontrol_component(kcontrol); + struct mt6358_priv *priv = snd_soc_component_get_drvdata(c); + + ucontrol->value.integer.value[0] = priv->dmic_one_wire_mode; + dev_dbg(priv->dev, "%s() dmic_mode = %d", __func__, priv->dmic_one_wire_mode); + + return 0; +} + +static int mt6358_dmic_mode_set(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *c = snd_soc_kcontrol_component(kcontrol); + struct mt6358_priv *priv = snd_soc_component_get_drvdata(c); + int enabled = ucontrol->value.integer.value[0]; + + if (enabled < 0 || enabled > 1) + return -EINVAL; + + if (priv->dmic_one_wire_mode != enabled) { + priv->dmic_one_wire_mode = enabled; + dev_dbg(priv->dev, "%s() dmic_mode = %d", __func__, priv->dmic_one_wire_mode); + + return 1; + } + dev_dbg(priv->dev, "%s() dmic_mode = %d", __func__, priv->dmic_one_wire_mode); + + return 0; +} + static const DECLARE_TLV_DB_SCALE(playback_tlv, -1000, 100, 0); static const DECLARE_TLV_DB_SCALE(pga_tlv, 0, 600, 0); @@ -599,6 +632,9 @@ static const struct snd_kcontrol_new mt6358_snd_controls[] = { SOC_SINGLE_BOOL_EXT("Wake-on-Voice Phase2 Switch", 0, mt6358_get_wov, mt6358_put_wov), + + SOC_SINGLE_BOOL_EXT("Dmic Mode Switch", 0, + mt6358_dmic_mode_get, mt6358_dmic_mode_set), }; /* MUX */
There are two hardware connection methods for DMICs on the MT6358. In cases where more than two DMICs are used, we need to time-multiplex these DMICs. Therefore, we need to dynamically switch the modes of these DMICs based on the actual usage scenarios. ---- DMIC1 AU_VIN0 --- ---- DMIC2 AU_VIN2 --- ----DMIC3 When we want to use DMIC1/2, configure it to one-wire mode. When we want to use DMIC1/3, configure it to two-wire mode. Signed-off-by: Jiaxin Yu <jiaxin.yu@mediatek.com> --- sound/soc/codecs/mt6358.c | 38 +++++++++++++++++++++++++++++++++++++- 1 file changed, 37 insertions(+), 1 deletion(-)