| Message ID | 20240620150122.1406631-2-amadeus@jmu.edu.cn (mailing list archive) |
|---|---|
| State | Awaiting Upstream, archived |
| Headers | show |
| Series | arm64: dts: qcom: ipq6018: add sdhci node | expand |
On Thu, Jun 20, 2024 at 11:01:21PM GMT, Chukun Pan wrote: > The mmc controller of the IPQ6018 does not support HS400 mode. > So adjust the maximum clock frequency of sdcc to 200 MHz (HS200). > > Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> Fixes? > --- > drivers/clk/qcom/gcc-ipq6018.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/clk/qcom/gcc-ipq6018.c b/drivers/clk/qcom/gcc-ipq6018.c > index 7e69de34c310..6c764e3e2665 100644 > --- a/drivers/clk/qcom/gcc-ipq6018.c > +++ b/drivers/clk/qcom/gcc-ipq6018.c > @@ -1617,7 +1617,7 @@ static const struct freq_tbl ftbl_sdcc_apps_clk_src[] = { > F(96000000, P_GPLL2, 12, 0, 0), > F(177777778, P_GPLL0, 4.5, 0, 0), > F(192000000, P_GPLL2, 6, 0, 0), > - F(384000000, P_GPLL2, 3, 0, 0), > + F(200000000, P_GPLL0, 4, 0, 0), > { } > }; > > -- > 2.25.1 >
On 20. 06. 2024. 17:01, Chukun Pan wrote: > The mmc controller of the IPQ6018 does not support HS400 mode. > So adjust the maximum clock frequency of sdcc to 200 MHz (HS200). > > Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> > --- > drivers/clk/qcom/gcc-ipq6018.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/clk/qcom/gcc-ipq6018.c b/drivers/clk/qcom/gcc-ipq6018.c > index 7e69de34c310..6c764e3e2665 100644 > --- a/drivers/clk/qcom/gcc-ipq6018.c > +++ b/drivers/clk/qcom/gcc-ipq6018.c > @@ -1617,7 +1617,7 @@ static const struct freq_tbl ftbl_sdcc_apps_clk_src[] = { > F(96000000, P_GPLL2, 12, 0, 0), > F(177777778, P_GPLL0, 4.5, 0, 0), > F(192000000, P_GPLL2, 6, 0, 0), > - F(384000000, P_GPLL2, 3, 0, 0), > + F(200000000, P_GPLL0, 4, 0, 0), Hi, Are you sure that 200MHz is even valid of a frequency, cause all IPQ SoC-s use 192MHz for the HS200 mode instead. I would just drop the 384MHz frequency as datasheet clearly states that HS400 is not supported. Regards, Robert > { } > }; >
On Sat, Jun 22, 2024 at 04:36:20PM GMT, Robert Marko wrote: > > On 20. 06. 2024. 17:01, Chukun Pan wrote: > > The mmc controller of the IPQ6018 does not support HS400 mode. > > So adjust the maximum clock frequency of sdcc to 200 MHz (HS200). > > > > Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> > > --- > > drivers/clk/qcom/gcc-ipq6018.c | 2 +- > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > diff --git a/drivers/clk/qcom/gcc-ipq6018.c b/drivers/clk/qcom/gcc-ipq6018.c > > index 7e69de34c310..6c764e3e2665 100644 > > --- a/drivers/clk/qcom/gcc-ipq6018.c > > +++ b/drivers/clk/qcom/gcc-ipq6018.c > > @@ -1617,7 +1617,7 @@ static const struct freq_tbl ftbl_sdcc_apps_clk_src[] = { > > F(96000000, P_GPLL2, 12, 0, 0), > > F(177777778, P_GPLL0, 4.5, 0, 0), > > F(192000000, P_GPLL2, 6, 0, 0), > > - F(384000000, P_GPLL2, 3, 0, 0), > > + F(200000000, P_GPLL0, 4, 0, 0), > > Hi, > Are you sure that 200MHz is even valid of a frequency, cause all IPQ SoC-s > use 192MHz for the HS200 mode instead. > If I'm parsing the docs correctly, 192MHz, 200MHz and 384MHz are a valid frequencies for the clock output, but the SDCC expects to receive 200MHz. > I would just drop the 384MHz frequency as datasheet clearly states that > HS400 > is not supported. > I'll pick this patch as suggested. Please don't hesitate to send a follow up patch according to this suggestion if it turns out to be a better choice. Regards, Bjorn > Regards, > Robert > > > { } > > };
On Wed, 26 Jun 2024 at 06:03, Bjorn Andersson <andersson@kernel.org> wrote: > > On Sat, Jun 22, 2024 at 04:36:20PM GMT, Robert Marko wrote: > > > > On 20. 06. 2024. 17:01, Chukun Pan wrote: > > > The mmc controller of the IPQ6018 does not support HS400 mode. > > > So adjust the maximum clock frequency of sdcc to 200 MHz (HS200). > > > > > > Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> > > > --- > > > drivers/clk/qcom/gcc-ipq6018.c | 2 +- > > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > > > diff --git a/drivers/clk/qcom/gcc-ipq6018.c b/drivers/clk/qcom/gcc-ipq6018.c > > > index 7e69de34c310..6c764e3e2665 100644 > > > --- a/drivers/clk/qcom/gcc-ipq6018.c > > > +++ b/drivers/clk/qcom/gcc-ipq6018.c > > > @@ -1617,7 +1617,7 @@ static const struct freq_tbl ftbl_sdcc_apps_clk_src[] = { > > > F(96000000, P_GPLL2, 12, 0, 0), > > > F(177777778, P_GPLL0, 4.5, 0, 0), > > > F(192000000, P_GPLL2, 6, 0, 0), > > > - F(384000000, P_GPLL2, 3, 0, 0), > > > + F(200000000, P_GPLL0, 4, 0, 0), > > > > Hi, > > Are you sure that 200MHz is even valid of a frequency, cause all IPQ SoC-s > > use 192MHz for the HS200 mode instead. > > > > If I'm parsing the docs correctly, 192MHz, 200MHz and 384MHz are a valid > frequencies for the clock output, but the SDCC expects to receive 200MHz. > > > I would just drop the 384MHz frequency as datasheet clearly states that > > HS400 > > is not supported. > > > > I'll pick this patch as suggested. Please don't hesitate to send a > follow up patch according to this suggestion if it turns out to be a > better choice. Since you have datasheet and 200MHz is a valid option that is fine by me. Regards, Robert > > Regards, > Bjorn > > > Regards, > > Robert > > > > > { } > > > };
diff --git a/drivers/clk/qcom/gcc-ipq6018.c b/drivers/clk/qcom/gcc-ipq6018.c index 7e69de34c310..6c764e3e2665 100644 --- a/drivers/clk/qcom/gcc-ipq6018.c +++ b/drivers/clk/qcom/gcc-ipq6018.c @@ -1617,7 +1617,7 @@ static const struct freq_tbl ftbl_sdcc_apps_clk_src[] = { F(96000000, P_GPLL2, 12, 0, 0), F(177777778, P_GPLL0, 4.5, 0, 0), F(192000000, P_GPLL2, 6, 0, 0), - F(384000000, P_GPLL2, 3, 0, 0), + F(200000000, P_GPLL0, 4, 0, 0), { } };
The mmc controller of the IPQ6018 does not support HS400 mode. So adjust the maximum clock frequency of sdcc to 200 MHz (HS200). Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> --- drivers/clk/qcom/gcc-ipq6018.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)