new file mode 100644
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/realtek,rt5677.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RT5677 audio CODEC
+
+maintainers:
+ - Animesh Agarwal <animeshagarwal28@gmail.com>
+
+description: |
+ This device supports I2C only.
+
+ Pins on the device (for linking into audio routes):
+ * IN1P
+ * IN1N
+ * IN2P
+ * IN2N
+ * MICBIAS1
+ * DMIC1
+ * DMIC2
+ * DMIC3
+ * DMIC4
+ * LOUT1
+ * LOUT2
+ * LOUT3
+
+allOf:
+ - $ref: dai-common.yaml#
+
+properties:
+ compatible:
+ const: realtek,rt5677
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ const: 2
+
+ realtek,pow-ldo2-gpio:
+ maxItems: 1
+ description: CODEC's POW_LDO2 pin.
+
+ realtek,reset-gpio:
+ maxItems: 1
+ description: CODEC's RESET pin. Active low.
+
+ realtek,gpio-config:
+ description: |
+ Array of six 8bit elements that configures GPIO.
+ 0 - floating (reset value)
+ 1 - pull down
+ 2 - pull up
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 6
+ maxItems: 6
+ items:
+ maximum: 2
+
+patternProperties:
+ "^realtek,in[1-2]-differential$":
+ type: boolean
+ description: Indicate MIC1/2 input are differential, rather than
+ single-ended.
+
+ "^realtek,lout[1-3]-differential$":
+ type: boolean
+ description: Indicate LOUT1/2/3 outputs are differential, rather than
+ single-ended.
+
+ "^realtek,jd[1-3]-gpio$":
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum:
+ - 0 # OFF
+ - 1 # GPIO1 for jd1 and GPIO4 for jd2.
+ - 2 # GPIO2 for jd1 and GPIO5 for jd2.
+ - 3 # GPIO3 for jd1 and GPIO6 for jd2.
+ description: Configures GPIO Mic Jack detection 1, 2 and 3.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - gpio-controller
+ - '#gpio-cells'
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ codec@2c {
+ compatible = "realtek,rt5677";
+ reg = <0x2c>;
+ interrupt-parent = <&gpio>;
+ interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ realtek,pow-ldo2-gpio = <&gpio 3 GPIO_ACTIVE_HIGH>;
+ realtek,reset-gpio = <&gpio 3 GPIO_ACTIVE_LOW>;
+ realtek,in1-differential;
+ realtek,gpio-config = <0 0 0 0 0 2>;
+ };
+ };
deleted file mode 100644
@@ -1,78 +0,0 @@
-RT5677 audio CODEC
-
-This device supports I2C only.
-
-Required properties:
-
-- compatible : "realtek,rt5677".
-
-- reg : The I2C address of the device.
-
-- interrupts : The CODEC's interrupt output.
-
-- gpio-controller : Indicates this device is a GPIO controller.
-
-- #gpio-cells : Should be two. The first cell is the pin number and the
- second cell is used to specify optional parameters (currently unused).
-
-Optional properties:
-
-- realtek,pow-ldo2-gpio : The GPIO that controls the CODEC's POW_LDO2 pin.
-- realtek,reset-gpio : The GPIO that controls the CODEC's RESET pin. Active low.
-
-- realtek,in1-differential
-- realtek,in2-differential
-- realtek,lout1-differential
-- realtek,lout2-differential
-- realtek,lout3-differential
- Boolean. Indicate MIC1/2 input and LOUT1/2/3 outputs are differential,
- rather than single-ended.
-
-- realtek,gpio-config
- Array of six 8bit elements that configures GPIO.
- 0 - floating (reset value)
- 1 - pull down
- 2 - pull up
-
-- realtek,jd1-gpio
- Configures GPIO Mic Jack detection 1.
- Select 0 ~ 3 as OFF, GPIO1, GPIO2 and GPIO3 respectively.
-
-- realtek,jd2-gpio
-- realtek,jd3-gpio
- Configures GPIO Mic Jack detection 2 and 3.
- Select 0 ~ 3 as OFF, GPIO4, GPIO5 and GPIO6 respectively.
-
-Pins on the device (for linking into audio routes):
-
- * IN1P
- * IN1N
- * IN2P
- * IN2N
- * MICBIAS1
- * DMIC1
- * DMIC2
- * DMIC3
- * DMIC4
- * LOUT1
- * LOUT2
- * LOUT3
-
-Example:
-
-rt5677 {
- compatible = "realtek,rt5677";
- reg = <0x2c>;
- interrupt-parent = <&gpio>;
- interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_HIGH>;
-
- gpio-controller;
- #gpio-cells = <2>;
-
- realtek,pow-ldo2-gpio =
- <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
- realtek,reset-gpio = <&gpio TEGRA_GPIO(BB, 3) GPIO_ACTIVE_LOW>;
- realtek,in1-differential = "true";
- realtek,gpio-config = /bits/ 8 <0 0 0 0 0 2>; /* pull up GPIO6 */
- realtek,jd2-gpio = <3>; /* Enables Jack detection for GPIO6 */
-};
Convert the RT5677 audio CODEC bindings to DT schema. Signed-off-by: Animesh Agarwal <animeshagarwal28@gmail.com> Cc: Daniel Baluta <daniel.baluta@nxp.com> --- .../bindings/sound/realtek,rt5677.yaml | 117 ++++++++++++++++++ .../devicetree/bindings/sound/rt5677.txt | 78 ------------ 2 files changed, 117 insertions(+), 78 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/realtek,rt5677.yaml delete mode 100644 Documentation/devicetree/bindings/sound/rt5677.txt