[0/3] ASoC: imx-audmix: Split capture device to be a new device

Message

S.J. Wang June 12, 2024, 6:40 a.m. UTC

The transmitter and receiver part of the SAI interface need to be
configured with different master/slave mode, especially to work
with the audiomix module.

The SAI1 TX is in master mode, but SAI1 RX is in slave mode.
So add another two DAIs for TX and RX separately in fsl_sai driver.

There will be three devices for audiomix sound card, hw:x,0 is
the playback device for one SAI, hw:x,1 is the playback device
for another SAI, hw:x,2 is the capture device for audmix
output.

Shengjiu Wang (3):
  ASoC: fsl_sai: Add separate DAI for transmitter and receiver
  ASoC: fsl_audmix: Split playback and capture stream to different DAI
  ASoC: imx-audmix: Split capture device for audmix

 sound/soc/fsl/fsl_audmix.c |  16 ++---
 sound/soc/fsl/fsl_sai.c    | 141 +++++++++++++++++++++++++++----------
 sound/soc/fsl/fsl_sai.h    |   4 +-
 sound/soc/fsl/imx-audmix.c |  79 ++++++++++++---------
 4 files changed, 155 insertions(+), 85 deletions(-)

Comments

Mark Brown June 27, 2024, 12:47 p.m. UTC | #1

On Wed, 12 Jun 2024 14:40:49 +0800, Shengjiu Wang wrote:
> The transmitter and receiver part of the SAI interface need to be
> configured with different master/slave mode, especially to work
> with the audiomix module.
> 
> The SAI1 TX is in master mode, but SAI1 RX is in slave mode.
> So add another two DAIs for TX and RX separately in fsl_sai driver.
> 
> [...]

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next

Thanks!

[1/3] ASoC: fsl_sai: Add separate DAI for transmitter and receiver
      commit: 15c958390460f964ec707ae6c5d1843638ebfe69
[2/3] ASoC: fsl_audmix: Split playback and capture stream to different DAI
      commit: 6232a7eb1afc842d0daf1c0314e1eda65731783f
[3/3] ASoC: imx-audmix: Split capture device for audmix
      commit: 05d996e113481fdd9ac40ccf5cadabd1e73f2404

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark