| Message ID | 87ed8halde.wl-kuninori.morimoto.gx@renesas.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | ASoC: simple-audio-mux: add state-labels | expand |
On 28/06/2024 03:47, Kuninori Morimoto wrote: > simple-audio-mux is designed to be used generally, thus "Input 1" or > "Input 2" are used to selecting MUX input. This numbered inputs would > work, but might be not user friendly in some case, for example in case > of system hardware design has some clear labels. > Adds new "state-labels" property and enable to select MUX by own state > names. > > Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> > --- > .../devicetree/bindings/sound/simple-audio-mux.yaml | 6 ++++++ > 1 file changed, 6 insertions(+) > > diff --git a/Documentation/devicetree/bindings/sound/simple-audio-mux.yaml b/Documentation/devicetree/bindings/sound/simple-audio-mux.yaml > index 9f319caf3db7..3b38a0753282 100644 > --- a/Documentation/devicetree/bindings/sound/simple-audio-mux.yaml > +++ b/Documentation/devicetree/bindings/sound/simple-audio-mux.yaml > @@ -24,6 +24,11 @@ properties: > description: | > GPIOs used to select the input line. > > + state-labels: > + description: | Do not need '|' unless you need to preserve formatting. > + State of input line. default is "Input 1", "Input 2" > + $ref: /schemas/types.yaml#/definitions/string-array If I understood correctly the driver, you have only one GPIO and only two states, right? If so, then "maxItems: 2". Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/sound/simple-audio-mux.yaml b/Documentation/devicetree/bindings/sound/simple-audio-mux.yaml index 9f319caf3db7..3b38a0753282 100644 --- a/Documentation/devicetree/bindings/sound/simple-audio-mux.yaml +++ b/Documentation/devicetree/bindings/sound/simple-audio-mux.yaml @@ -24,6 +24,11 @@ properties: description: | GPIOs used to select the input line. + state-labels: + description: | + State of input line. default is "Input 1", "Input 2" + $ref: /schemas/types.yaml#/definitions/string-array + sound-name-prefix: true required: @@ -37,4 +42,5 @@ examples: mux { compatible = "simple-audio-mux"; mux-gpios = <&gpio 3 0>; + state-labels = "Label_A", "Label_B"; };
simple-audio-mux is designed to be used generally, thus "Input 1" or "Input 2" are used to selecting MUX input. This numbered inputs would work, but might be not user friendly in some case, for example in case of system hardware design has some clear labels. Adds new "state-labels" property and enable to select MUX by own state names. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> --- .../devicetree/bindings/sound/simple-audio-mux.yaml | 6 ++++++ 1 file changed, 6 insertions(+)