diff mbox series

[3/6] arm64: dts: qcom: sc7280: Add IMX577 camera sensor

Message ID 20240629-camss_first_post_linux_next-v1-3-bc798edabc3a@quicinc.com (mailing list archive)
State New
Headers show
Series media: qcom: camss: Add sc7280 support | expand

Commit Message

Vikram Sharma June 28, 2024, 6:32 p.m. UTC
Add support for IMX577 camera sensor for SC7280 SoC.

Signed-off-by: Hariram Purushothaman <quic_hariramp@quicinc.com>
Signed-off-by: Trishansh Bhardwaj <quic_tbhardwa@quicinc.com>
Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
---
 arch/arm64/boot/dts/qcom/sc7280.dtsi | 33 +++++++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

Comments

Bryan O'Donoghue June 29, 2024, 11:07 a.m. UTC | #1
On 28/06/2024 19:32, Vikram Sharma wrote:
> Add support for IMX577 camera sensor for SC7280 SoC.
> 
> Signed-off-by: Hariram Purushothaman <quic_hariramp@quicinc.com>
> Signed-off-by: Trishansh Bhardwaj <quic_tbhardwa@quicinc.com>
> Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
> ---
>   arch/arm64/boot/dts/qcom/sc7280.dtsi | 33 +++++++++++++++++++++++++++++++++
>   1 file changed, 33 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> index 9ac251fec262..1c99ee09a11a 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> @@ -5167,6 +5167,39 @@ cci3_sleep: cci3-sleep-state {
>   				bias-pull-down;
>   			};
>   
> +			cam2_default: cam2-default {
> +				rst {
> +					pins = "gpio78"; /*cam3*/

I don't think the /* cam3 */ adds much here TBH.

> +					function = "gpio";
> +					drive-strength = <2>;
> +					bias-disable;
> +				};
> +
> +				mclk {
> +					pins = "gpio67"; /*cam3*/
> +					function = "cam_mclk";
> +					drive-strength = <2>; /*RB5 was 16 and i changed to 2 here*/

You can drop that comment too, actually more saliently, what are you 
changing from 16 to 2 since its being mentioned ?

---
bod
Konrad Dybcio June 29, 2024, 1:10 p.m. UTC | #2
On 28.06.2024 8:32 PM, Vikram Sharma wrote:
> Add support for IMX577 camera sensor for SC7280 SoC.
> 
> Signed-off-by: Hariram Purushothaman <quic_hariramp@quicinc.com>
> Signed-off-by: Trishansh Bhardwaj <quic_tbhardwa@quicinc.com>
> Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
> ---
>  arch/arm64/boot/dts/qcom/sc7280.dtsi | 33 +++++++++++++++++++++++++++++++++
>  1 file changed, 33 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> index 9ac251fec262..1c99ee09a11a 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> @@ -5167,6 +5167,39 @@ cci3_sleep: cci3-sleep-state {
>  				bias-pull-down;
>  			};
>  
> +			cam2_default: cam2-default {
> +				rst {
> +					pins = "gpio78"; /*cam3*/

You can drop these comments.. the node name and label suggest this is
cam*2* anyway

> +					function = "gpio";
> +					drive-strength = <2>;
> +					bias-disable;
> +				};
> +
> +				mclk {
> +					pins = "gpio67"; /*cam3*/
> +					function = "cam_mclk";
> +					drive-strength = <2>; /*RB5 was 16 and i changed to 2 here*/

/* why? */

Konrad
Krzysztof Kozlowski July 1, 2024, 8:59 a.m. UTC | #3
On 28/06/2024 20:32, Vikram Sharma wrote:
> Add support for IMX577 camera sensor for SC7280 SoC.
> 
> Signed-off-by: Hariram Purushothaman <quic_hariramp@quicinc.com>
> Signed-off-by: Trishansh Bhardwaj <quic_tbhardwa@quicinc.com>
> Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
> ---
>  arch/arm64/boot/dts/qcom/sc7280.dtsi | 33 +++++++++++++++++++++++++++++++++
>  1 file changed, 33 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> index 9ac251fec262..1c99ee09a11a 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> @@ -5167,6 +5167,39 @@ cci3_sleep: cci3-sleep-state {
>  				bias-pull-down;
>  			};
>  
> +			cam2_default: cam2-default {

There are tools. Use them, instead of us. Read you internal guideline -
it asks you to do that.

It does not look like you tested the DTS against bindings. Please run
`make dtbs_check W=1` (see
Documentation/devicetree/bindings/writing-schema.rst or
https://www.linaro.org/blog/tips-and-tricks-for-validating-devicetree-sources-with-the-devicetree-schema/
for instructions).



Best regards,
Krzysztof
Dmitry Baryshkov July 1, 2024, 6:38 p.m. UTC | #4
On Sat, Jun 29, 2024 at 12:02:37AM GMT, Vikram Sharma wrote:
> Add support for IMX577 camera sensor for SC7280 SoC.

Note, the subject and commit description do not match patch contents.

> 
> Signed-off-by: Hariram Purushothaman <quic_hariramp@quicinc.com>
> Signed-off-by: Trishansh Bhardwaj <quic_tbhardwa@quicinc.com>
> Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
> ---
>  arch/arm64/boot/dts/qcom/sc7280.dtsi | 33 +++++++++++++++++++++++++++++++++
>  1 file changed, 33 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> index 9ac251fec262..1c99ee09a11a 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> @@ -5167,6 +5167,39 @@ cci3_sleep: cci3-sleep-state {
>  				bias-pull-down;
>  			};
>  
> +			cam2_default: cam2-default {
> +				rst {
> +					pins = "gpio78"; /*cam3*/
> +					function = "gpio";
> +					drive-strength = <2>;
> +					bias-disable;
> +				};
> +
> +				mclk {
> +					pins = "gpio67"; /*cam3*/
> +					function = "cam_mclk";
> +					drive-strength = <2>; /*RB5 was 16 and i changed to 2 here*/
> +					bias-disable;
> +				};
> +			};
> +
> +			cam2_suspend: cam2-suspend {
> +				rst {
> +					pins = "gpio78"; /*cam3*/
> +					function = "gpio";
> +					drive-strength = <2>;
> +					bias-pull-down;
> +					output-low;
> +				};
> +
> +				mclk {
> +					pins = "gpio67"; /*cam3*/
> +					function = "cam_mclk";
> +					drive-strength = <2>;
> +					bias-pull-down;
> +				};
> +			};
> +
>  			dp_hot_plug_det: dp-hot-plug-det-state {
>  				pins = "gpio47";
>  				function = "dp_hot";
> 
> -- 
> 2.25.1
>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 9ac251fec262..1c99ee09a11a 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -5167,6 +5167,39 @@  cci3_sleep: cci3-sleep-state {
 				bias-pull-down;
 			};
 
+			cam2_default: cam2-default {
+				rst {
+					pins = "gpio78"; /*cam3*/
+					function = "gpio";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				mclk {
+					pins = "gpio67"; /*cam3*/
+					function = "cam_mclk";
+					drive-strength = <2>; /*RB5 was 16 and i changed to 2 here*/
+					bias-disable;
+				};
+			};
+
+			cam2_suspend: cam2-suspend {
+				rst {
+					pins = "gpio78"; /*cam3*/
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+					output-low;
+				};
+
+				mclk {
+					pins = "gpio67"; /*cam3*/
+					function = "cam_mclk";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
 			dp_hot_plug_det: dp-hot-plug-det-state {
 				pins = "gpio47";
 				function = "dp_hot";