mbox series

[v3,0/2] ARM: dts: qcom-msm8226-samsung-ms013g: Add initial device tree

Message ID 20240630132859.2885-1-raymondhackley@protonmail.com (mailing list archive)
Headers show
Series ARM: dts: qcom-msm8226-samsung-ms013g: Add initial device tree | expand

Message

Raymond Hackley June 30, 2024, 1:29 p.m. UTC
Samsung Galaxy Grand 2 is a phone based on MSM8226. It's similar to the
other Samsung devices based on MSM8226 with only a few minor differences.

The device trees contain initial support with:
 - GPIO keys
 - Regulator haptic
 - SDHCI (internal and external storage)
 - UART (on USB connector via the TI TSU6721 MUIC)
 - Regulators
 - Touchscreen
 - Accelerometer

---
v2: Adjust l3, l15, l22 and l27 regulator voltages. Sort nodes.
    Set regulator-allow-set-load for vqmmc supplies.
v3: Rename node haptic to vibrator.

Comments

Rob Herring (Arm) July 1, 2024, 6:10 p.m. UTC | #1
On Sun, 30 Jun 2024 13:29:13 +0000, Raymond Hackley wrote:
> Samsung Galaxy Grand 2 is a phone based on MSM8226. It's similar to the
> other Samsung devices based on MSM8226 with only a few minor differences.
> 
> The device trees contain initial support with:
>  - GPIO keys
>  - Regulator haptic
>  - SDHCI (internal and external storage)
>  - UART (on USB connector via the TI TSU6721 MUIC)
>  - Regulators
>  - Touchscreen
>  - Accelerometer
> 
> ---
> v2: Adjust l3, l15, l22 and l27 regulator voltages. Sort nodes.
>     Set regulator-allow-set-load for vqmmc supplies.
> v3: Rename node haptic to vibrator.
> 
> 
> 


My bot found new DTB warnings on the .dts files added or changed in this
series.

Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.

If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:

  pip3 install dtschema --upgrade


New warnings running 'make CHECK_DTBS=y qcom/qcom-msm8226-samsung-ms013g.dtb' for 20240630132859.2885-1-raymondhackley@protonmail.com:

arch/arm/boot/dts/qcom/qcom-msm8226-samsung-ms013g.dtb: syscon@f9011000: compatible: ['syscon'] is too short
	from schema $id: http://devicetree.org/schemas/mfd/syscon-common.yaml#
Bjorn Andersson July 3, 2024, 3:37 a.m. UTC | #2
On Sun, 30 Jun 2024 13:29:13 +0000, Raymond Hackley wrote:
> Samsung Galaxy Grand 2 is a phone based on MSM8226. It's similar to the
> other Samsung devices based on MSM8226 with only a few minor differences.
> 
> The device trees contain initial support with:
>  - GPIO keys
>  - Regulator haptic
>  - SDHCI (internal and external storage)
>  - UART (on USB connector via the TI TSU6721 MUIC)
>  - Regulators
>  - Touchscreen
>  - Accelerometer
> 
> [...]

Applied, thanks!

[2/2] ARM: dts: qcom-msm8226-samsung-ms013g: Add initial device tree
      commit: 2a5454d0fe5684855581f8ad958afbcdc476fd64

Best regards,