diff mbox series

[v2,11/11] hwmon: (amc6821) Add support for pwm1_mode attribute

Message ID 20240701212348.1670617-12-linux@roeck-us.net (mailing list archive)
State Superseded
Headers show
Series hwmon: (amc6821) Various improvements | expand

Commit Message

Guenter Roeck July 1, 2024, 9:23 p.m. UTC
AMC6821 supports configuring if a fan is DC or PWM controlled.
Add support for the pwm1_mode attribute to make it runtime configurable.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
v2: New patch

 Documentation/hwmon/amc6821.rst |  1 +
 drivers/hwmon/amc6821.c         | 16 +++++++++++++++-
 2 files changed, 16 insertions(+), 1 deletion(-)

Comments

Quentin Schulz July 3, 2024, 3:28 p.m. UTC | #1
Hi Guenter,

On 7/1/24 11:23 PM, Guenter Roeck wrote:
> AMC6821 supports configuring if a fan is DC or PWM controlled.
> Add support for the pwm1_mode attribute to make it runtime configurable.
> 
> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
> ---
> v2: New patch
> 
>   Documentation/hwmon/amc6821.rst |  1 +
>   drivers/hwmon/amc6821.c         | 16 +++++++++++++++-
>   2 files changed, 16 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/hwmon/amc6821.rst b/Documentation/hwmon/amc6821.rst
> index 96e604c5ea8e..dbd544cd1160 100644
> --- a/Documentation/hwmon/amc6821.rst
> +++ b/Documentation/hwmon/amc6821.rst
> @@ -58,6 +58,7 @@ pwm1_enable		rw	regulator mode, 1=open loop, 2=fan controlled
>   				remote-sensor temperature,
>   				4=fan controlled by target rpm set with
>   				fan1_target attribute.
> +pwm1_mode		rw	Fan duty control mode (0=DC, 1=PWM)
>   pwm1_auto_channels_temp ro	1 if pwm_enable==2, 3 if pwm_enable==3
>   pwm1_auto_point1_pwm	ro	Hardwired to 0, shared for both
>   				temperature channels.
> diff --git a/drivers/hwmon/amc6821.c b/drivers/hwmon/amc6821.c
> index 5a3c089ae06f..98a45fe529e0 100644
> --- a/drivers/hwmon/amc6821.c
> +++ b/drivers/hwmon/amc6821.c
> @@ -317,6 +317,12 @@ static int amc6821_pwm_read(struct device *dev, u32 attr, long *val)
>   			break;
>   		}
>   		return 0;
> +	case hwmon_pwm_mode:
> +		err = regmap_read(regmap, AMC6821_REG_CONF2, &regval);
> +		if (err)
> +			return err;
> +		*val = !!(regval & AMC6821_CONF2_TACH_MODE);
> +		return 0;
>   	case hwmon_pwm_auto_channels_temp:
>   		err = regmap_read(regmap, AMC6821_REG_CONF1, &regval);
>   		if (err)
> @@ -372,6 +378,13 @@ static int amc6821_pwm_write(struct device *dev, u32 attr, long val)
>   		return regmap_update_bits(regmap, AMC6821_REG_CONF1,
>   					  AMC6821_CONF1_FDRC0 | AMC6821_CONF1_FDRC1,
>   					  mode);
> +	case hwmon_pwm_mode:
> +		if (val < 0 || val > 1)
> +			return -EINVAL;
> +		return regmap_update_bits(regmap, AMC6821_REG_CONF1,

Wrong register here, should be AMC6821_REG_CONF2.

Otherwise, looks good to me.

Cheers,
Quentin
Guenter Roeck July 3, 2024, 9:29 p.m. UTC | #2
On 7/3/24 08:28, Quentin Schulz wrote:
> Hi Guenter,
> 
> On 7/1/24 11:23 PM, Guenter Roeck wrote:
>> AMC6821 supports configuring if a fan is DC or PWM controlled.
>> Add support for the pwm1_mode attribute to make it runtime configurable.
>>
>> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
>> ---
>> v2: New patch
>>
>>   Documentation/hwmon/amc6821.rst |  1 +
>>   drivers/hwmon/amc6821.c         | 16 +++++++++++++++-
>>   2 files changed, 16 insertions(+), 1 deletion(-)
>>
>> diff --git a/Documentation/hwmon/amc6821.rst b/Documentation/hwmon/amc6821.rst
>> index 96e604c5ea8e..dbd544cd1160 100644
>> --- a/Documentation/hwmon/amc6821.rst
>> +++ b/Documentation/hwmon/amc6821.rst
>> @@ -58,6 +58,7 @@ pwm1_enable        rw    regulator mode, 1=open loop, 2=fan controlled
>>                   remote-sensor temperature,
>>                   4=fan controlled by target rpm set with
>>                   fan1_target attribute.
>> +pwm1_mode        rw    Fan duty control mode (0=DC, 1=PWM)
>>   pwm1_auto_channels_temp ro    1 if pwm_enable==2, 3 if pwm_enable==3
>>   pwm1_auto_point1_pwm    ro    Hardwired to 0, shared for both
>>                   temperature channels.
>> diff --git a/drivers/hwmon/amc6821.c b/drivers/hwmon/amc6821.c
>> index 5a3c089ae06f..98a45fe529e0 100644
>> --- a/drivers/hwmon/amc6821.c
>> +++ b/drivers/hwmon/amc6821.c
>> @@ -317,6 +317,12 @@ static int amc6821_pwm_read(struct device *dev, u32 attr, long *val)
>>               break;
>>           }
>>           return 0;
>> +    case hwmon_pwm_mode:
>> +        err = regmap_read(regmap, AMC6821_REG_CONF2, &regval);
>> +        if (err)
>> +            return err;
>> +        *val = !!(regval & AMC6821_CONF2_TACH_MODE);
>> +        return 0;
>>       case hwmon_pwm_auto_channels_temp:
>>           err = regmap_read(regmap, AMC6821_REG_CONF1, &regval);
>>           if (err)
>> @@ -372,6 +378,13 @@ static int amc6821_pwm_write(struct device *dev, u32 attr, long val)
>>           return regmap_update_bits(regmap, AMC6821_REG_CONF1,
>>                         AMC6821_CONF1_FDRC0 | AMC6821_CONF1_FDRC1,
>>                         mode);
>> +    case hwmon_pwm_mode:
>> +        if (val < 0 || val > 1)
>> +            return -EINVAL;
>> +        return regmap_update_bits(regmap, AMC6821_REG_CONF1,
> 
> Wrong register here, should be AMC6821_REG_CONF2.
> 

Oops. I had a bug in my test script, and thanks to that it failed to report the problem.

Thanks for noticing!
Guenter
diff mbox series

Patch

diff --git a/Documentation/hwmon/amc6821.rst b/Documentation/hwmon/amc6821.rst
index 96e604c5ea8e..dbd544cd1160 100644
--- a/Documentation/hwmon/amc6821.rst
+++ b/Documentation/hwmon/amc6821.rst
@@ -58,6 +58,7 @@  pwm1_enable		rw	regulator mode, 1=open loop, 2=fan controlled
 				remote-sensor temperature,
 				4=fan controlled by target rpm set with
 				fan1_target attribute.
+pwm1_mode		rw	Fan duty control mode (0=DC, 1=PWM)
 pwm1_auto_channels_temp ro	1 if pwm_enable==2, 3 if pwm_enable==3
 pwm1_auto_point1_pwm	ro	Hardwired to 0, shared for both
 				temperature channels.
diff --git a/drivers/hwmon/amc6821.c b/drivers/hwmon/amc6821.c
index 5a3c089ae06f..98a45fe529e0 100644
--- a/drivers/hwmon/amc6821.c
+++ b/drivers/hwmon/amc6821.c
@@ -317,6 +317,12 @@  static int amc6821_pwm_read(struct device *dev, u32 attr, long *val)
 			break;
 		}
 		return 0;
+	case hwmon_pwm_mode:
+		err = regmap_read(regmap, AMC6821_REG_CONF2, &regval);
+		if (err)
+			return err;
+		*val = !!(regval & AMC6821_CONF2_TACH_MODE);
+		return 0;
 	case hwmon_pwm_auto_channels_temp:
 		err = regmap_read(regmap, AMC6821_REG_CONF1, &regval);
 		if (err)
@@ -372,6 +378,13 @@  static int amc6821_pwm_write(struct device *dev, u32 attr, long val)
 		return regmap_update_bits(regmap, AMC6821_REG_CONF1,
 					  AMC6821_CONF1_FDRC0 | AMC6821_CONF1_FDRC1,
 					  mode);
+	case hwmon_pwm_mode:
+		if (val < 0 || val > 1)
+			return -EINVAL;
+		return regmap_update_bits(regmap, AMC6821_REG_CONF1,
+					  AMC6821_CONF2_TACH_MODE,
+					  val ? AMC6821_CONF2_TACH_MODE : 0);
+		break;
 	case hwmon_pwm_input:
 		if (val < 0 || val > 255)
 			return -EINVAL;
@@ -749,6 +762,7 @@  static umode_t amc6821_is_visible(const void *data,
 		}
 	case hwmon_pwm:
 		switch (attr) {
+		case hwmon_pwm_mode:
 		case hwmon_pwm_enable:
 		case hwmon_pwm_input:
 			return 0644;
@@ -775,7 +789,7 @@  static const struct hwmon_channel_info * const amc6821_info[] = {
 			   HWMON_F_INPUT | HWMON_F_MIN | HWMON_F_MAX |
 			   HWMON_F_TARGET | HWMON_F_PULSES | HWMON_F_FAULT),
 	HWMON_CHANNEL_INFO(pwm,
-			   HWMON_PWM_INPUT | HWMON_PWM_ENABLE |
+			   HWMON_PWM_INPUT | HWMON_PWM_ENABLE | HWMON_PWM_MODE |
 			   HWMON_PWM_AUTO_CHANNELS_TEMP),
 	NULL
 };