diff mbox series

[2/2] arm64: dts: rockchip: add rock5 itx board

Message ID 20240703210524.776455-3-heiko@sntech.de (mailing list archive)
State New
Headers show
Series Rock 5 ITX devicetree | expand

Commit Message

Heiko Stübner July 3, 2024, 9:05 p.m. UTC
The Rock 5 ITX as the name suggests is made in the ITX form factor and
actually build in a form to be used in a regular case even providing
connectors for regular front-panel io.

It can be powered either bei 12V, ATX power-supply or PoE.

Notable peripherals are the 4 SATA ports, M.2 M-Key slot, M.2 E-key slot,
2*2.5Gb pcie-connected ethernet nics.

As of yet unsupported display options consist of 2*hdmi, DP via type-c,
eDP + 2*DSI via pcb connectors.

USB ports are 4*USB3 + 2*USB2 on the back panel and 2-port front-panel
connector.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
 arch/arm64/boot/dts/rockchip/Makefile         |    1 +
 .../boot/dts/rockchip/rk3588-rock-5itx.dts    | 1188 +++++++++++++++++
 2 files changed, 1189 insertions(+)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3588-rock-5itx.dts

Comments

Dragan Simic July 3, 2024, 9:16 p.m. UTC | #1
Hello Heiko,

Please see a few comments below.

On 2024-07-03 23:05, Heiko Stuebner wrote:
> The Rock 5 ITX as the name suggests is made in the ITX form factor and

s/Rock/ROCK/

> actually build in a form to be used in a regular case even providing

s/build/built/

> connectors for regular front-panel io.
> 
> It can be powered either bei 12V, ATX power-supply or PoE.

s/bei/by/

> Notable peripherals are the 4 SATA ports, M.2 M-Key slot, M.2 E-key 
> slot,
> 2*2.5Gb pcie-connected ethernet nics.

s/pcie/PCIe/
s/ethernet/Ethernet/
s/nics/NICs/

> As of yet unsupported display options consist of 2*hdmi, DP via type-c,
> eDP + 2*DSI via pcb connectors.

s/hdmi/HDMI/
s/type-c/USB-C/
s/pcb/PCB/

> USB ports are 4*USB3 + 2*USB2 on the back panel and 2-port front-panel
> connector.
> 
> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
> ---
>  arch/arm64/boot/dts/rockchip/Makefile         |    1 +
>  .../boot/dts/rockchip/rk3588-rock-5itx.dts    | 1188 +++++++++++++++++

The new dts file should be named rk3588-rock-5-itx.dts instead, because
the board name deviates from the standard Radxa naming scheme.

>  2 files changed, 1189 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/rockchip/rk3588-rock-5itx.dts
> 
> diff --git a/arch/arm64/boot/dts/rockchip/Makefile
> b/arch/arm64/boot/dts/rockchip/Makefile
> index e8eba631da23e..0380768586436 100644
> --- a/arch/arm64/boot/dts/rockchip/Makefile
> +++ b/arch/arm64/boot/dts/rockchip/Makefile
> @@ -132,6 +132,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += 
> rk3588-quartzpro64.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b-pcie-ep.dtbo
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b-pcie-srns.dtbo
> +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5itx.dtb

The same comment about the file name as above applies here as well.

>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-tiger-haikou.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-toybrick-x0.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-turing-rk1.dtb
> diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5itx.dts
> b/arch/arm64/boot/dts/rockchip/rk3588-rock-5itx.dts
> new file mode 100644
> index 0000000000000..41d92ceeeb09c
> --- /dev/null
> +++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5itx.dts
> @@ -0,0 +1,1188 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2022 Rockchip Electronics Co., Ltd.
> + * Copyright (c) 2022 Radxa Limited
> + *
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/leds/common.h>
> +#include <dt-bindings/pinctrl/rockchip.h>
> +#include <dt-bindings/pwm/pwm.h>
> +#include "dt-bindings/usb/pd.h"
> +#include "rk3588.dtsi"
> +
> +/ {
> +	model = "Radxa ROCK 5 ITX";
> +	compatible = "radxa,rock-5itx", "rockchip,rk3588";

s/5itx/5-itx/

> +
> +	aliases {
> +		mmc0 = &sdhci;
> +		mmc1 = &sdmmc;
> +		mmc2 = &sdio;
> +	};
> +
> +	chosen {
> +		stdout-path = "serial2:1500000n8";
> +	};
> +
> +	adc_keys: adc-keys {
> +		compatible = "adc-keys";
> +		io-channels = <&saradc 0>;
> +		io-channel-names = "buttons";
> +		keyup-threshold-microvolt = <1800000>;
> +		poll-interval = <100>;
> +		status = "okay";
> +
> +		button-maskrom {
> +			label = "Mask Rom";
> +			linux,code = <KEY_SETUP>;
> +			press-threshold-microvolt = <1750>;
> +		};
> +	};
> +
> +	analog-sound {
> +		compatible = "audio-graph-card";
> +		label = "rk3588-es8316";
> +
> +		widgets = "Microphone", "Mic Jack",
> +			  "Headphone", "Headphones";
> +
> +		routing = "MIC2", "Mic Jack",
> +			  "Headphones", "HPOL",
> +			  "Headphones", "HPOR";
> +
> +		dais = <&i2s0_8ch_p0>;
> +		hp-det-gpio = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&hp_detect>;
> +	};
> +
> +	gpio-leds {
> +		compatible = "gpio-leds";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&led_pins>;
> +
> +		power-led1 {
> +			gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
> +			linux,default-trigger = "default-on";
> +		};
> +
> +		hdd-led2 {
> +			gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_HIGH>;
> +			linux,default-trigger = "disk-activity";
> +		};
> +	};
> +
> +	fan0: pwm-fan {
> +		compatible = "pwm-fan";
> +		#cooling-cells = <2>;
> +		cooling-levels = <0 64 128 192 255>;
> +		fan-supply = <&vcc12v_dcin>;
> +		pwms = <&pwm14 0 10000 0>;
> +	};
> +
> +	/* M.2 E-KEY */
> +	sdio_pwrseq: sdio-pwrseq {
> +		compatible = "mmc-pwrseq-simple";
> +		clocks = <&hym8563>;
> +		clock-names = "ext_clock";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&wifi_enable_h>;
> +		reset-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_LOW>;
> +	};
> +
> +	typec_vin: regulator-typec-vin {
> +		compatible = "regulator-fixed";
> +		enable-active-high;
> +		gpio = <&gpio1 RK_PB6 GPIO_ACTIVE_HIGH>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&vbus5v0_typec_en>;
> +		regulator-name = "typec_vin";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		vin-supply = <&vcc5v0_sys>;
> +	};
> +
> +	vcc12v_dcin: regulator-vcc12v-dcin {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc12v_dcin";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-min-microvolt = <12000000>;
> +		regulator-max-microvolt = <12000000>;
> +	};
> +
> +	vcc33_io64: regulator-vcc33-io64 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc33_io64";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		vin-supply = <&vcc12v_dcin>;
> +	};
> +
> +	vcc3v3_ekey: regulator-vcc3v3-ekey {
> +		compatible = "regulator-fixed";
> +		enable-active-high;
> +		gpios = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&ekey_en>;
> +		regulator-name = "vcc3v3_ekey";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		startup-delay-us = <50000>;
> +		vin-supply = <&vcc5v0_sys>;
> +	};
> +
> +	vcc3v3_lan: vcc3v3_lan_phy2: regulator-vcc3v3-lan {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc3v3_lan";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		vin-supply = <&vcc_3v3_s3>;
> +	};
> +
> +	vcc3v3_mkey: regulator-vcc3v3-mkey {
> +		compatible = "regulator-fixed";
> +		enable-active-high;
> +		gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pcie30x4_pwren_h>;
> +		regulator-name = "vcc3v3_mkey";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		startup-delay-us = <5000>;
> +		vin-supply = <&vcc5v0_sys>;
> +	};
> +
> +	vcc3v3_sys: regulator-vcc3v3-sys {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc3v3_sys";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		vin-supply = <&vcc12v_dcin>;
> +	};
> +
> +	vcc5v0_sys: regulator-vcc5v0-sys {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc5v0_sys";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		vin-supply = <&vcc12v_dcin>;
> +	};
> +
> +	vcc5v0_usb20: vcc5v0_usb12: vcc5v0_usb34: regulator-vcc5v0-usb {
> +		compatible = "regulator-fixed";
> +		enable-active-high;
> +		gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&usb_host_pwren_h>;
> +		regulator-name = "vcc5v0_usb";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		vin-supply = <&vcc5v0_sys>;
> +	};
> +
> +	vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc_1v1_nldo_s3";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-min-microvolt = <1100000>;
> +		regulator-max-microvolt = <1100000>;
> +		vin-supply = <&vcc5v0_sys>;
> +	};
> +};
> +
> +&combphy0_ps {
> +	status = "okay";
> +};
> +
> +&combphy1_ps {
> +	status = "okay";
> +};
> +
> +&combphy2_psu {
> +	status = "okay";
> +};
> +
> +&cpu_b0 {
> +	cpu-supply = <&vdd_cpu_big0_s0>;
> +};
> +
> +&cpu_b1 {
> +	cpu-supply = <&vdd_cpu_big0_s0>;
> +};
> +
> +&cpu_b2 {
> +	cpu-supply = <&vdd_cpu_big1_s0>;
> +};
> +
> +&cpu_b3 {
> +	cpu-supply = <&vdd_cpu_big1_s0>;
> +};
> +
> +&cpu_l0 {
> +	cpu-supply = <&vdd_cpu_lit_s0>;
> +};
> +
> +&cpu_l1 {
> +	cpu-supply = <&vdd_cpu_lit_s0>;
> +};
> +
> +&cpu_l2 {
> +	cpu-supply = <&vdd_cpu_lit_s0>;
> +};
> +
> +&cpu_l3 {
> +	cpu-supply = <&vdd_cpu_lit_s0>;
> +};
> +
> +&gpu {
> +	mali-supply = <&vdd_gpu_s0>;
> +	status = "okay";
> +};
> +
> +&i2c0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&i2c0m2_xfer>;
> +	status = "okay";
> +
> +	vdd_cpu_big0_s0: regulator@42 {
> +		compatible = "rockchip,rk8602";
> +		reg = <0x42>;
> +		fcs,suspend-voltage-selector = <1>;
> +		regulator-name = "vdd_cpu_big0_s0";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-min-microvolt = <550000>;
> +		regulator-max-microvolt = <1050000>;
> +		regulator-ramp-delay = <2300>;
> +		vin-supply = <&vcc5v0_sys>;
> +
> +		regulator-state-mem {
> +			regulator-off-in-suspend;
> +		};
> +	};
> +
> +	vdd_cpu_big1_s0: regulator@43 {
> +		compatible = "rockchip,rk8603", "rockchip,rk8602";
> +		reg = <0x43>;
> +		fcs,suspend-voltage-selector = <1>;
> +		regulator-name = "vdd_cpu_big1_s0";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-min-microvolt = <550000>;
> +		regulator-max-microvolt = <1050000>;
> +		regulator-ramp-delay = <2300>;
> +		vin-supply = <&vcc5v0_sys>;
> +
> +		regulator-state-mem {
> +			regulator-off-in-suspend;
> +		};
> +	};
> +};
> +
> +&i2c1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&i2c1m2_xfer>;
> +	status = "okay";
> +
> +	vdd_npu_s0: regulator@42 {
> +		compatible = "rockchip,rk8602";
> +		reg = <0x42>;
> +		fcs,suspend-voltage-selector = <1>;
> +		regulator-name = "vdd_npu_s0";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-min-microvolt = <550000>;
> +		regulator-max-microvolt = <950000>;
> +		regulator-ramp-delay = <2300>;
> +		vin-supply = <&vcc5v0_sys>;
> +
> +		regulator-state-mem {
> +			regulator-off-in-suspend;
> +		};
> +	};
> +};
> +
> +/* CAM0 connector */
> +&i2c3 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&i2c3m0_xfer>;
> +};
> +
> +/* M.2 E-key */
> +&i2c4 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&i2c4m1_xfer>;
> +};
> +
> +/* RTC and LCD0 connector */
> +&i2c6 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&i2c6m0_xfer>;
> +	status = "okay";
> +
> +	hym8563: rtc@51 {
> +		compatible = "haoyu,hym8563";
> +		reg = <0x51>;
> +		#clock-cells = <0>;
> +		clock-output-names = "wifi_32kout";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&rtc_int>;
> +		interrupt-parent = <&gpio0>;
> +		interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
> +	};
> +};
> +
> +/* Audio codec and CAM1 connector */
> +&i2c7 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&i2c7m0_xfer>;
> +	status = "okay";
> +
> +	es8316: audio-codec@11 {
> +		compatible = "everest,es8316";
> +		reg = <0x11>;
> +		clocks = <&cru I2S0_8CH_MCLKOUT>;
> +		clock-names = "mclk";
> +		assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
> +		assigned-clock-rates = <12288000>;
> +		#sound-dai-cells = <0>;
> +
> +		port {
> +			es8316_p0_0: endpoint {
> +				remote-endpoint = <&i2s0_8ch_p0_0>;
> +			};
> +		};
> +	};
> +};
> +
> +/* FUSB302 and LCD1 connector */
> +&i2c8 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&i2c8m4_xfer>;
> +	status = "okay";
> +
> +	usbc0: usb-typec@22 {
> +		compatible = "fcs,fusb302";
> +		reg = <0x22>;
> +		interrupt-parent = <&gpio3>;
> +		interrupts = <RK_PB4 IRQ_TYPE_LEVEL_LOW>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&usbc0_int>;
> +		vbus-supply = <&typec_vin>;
> +
> +		usb_con: connector {
> +			compatible = "usb-c-connector";
> +			label = "USB-C";
> +			data-role = "dual";
> +			power-role = "dual";
> +			try-power-role = "sink";
> +			op-sink-microwatt = <1000000>;
> +			sink-pdos =
> +				<PDO_FIXED(5000, 1000, PDO_FIXED_USB_COMM)>;
> +			source-pdos =
> +				<PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
> +
> +			ports {
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +
> +				port@0 {
> +					reg = <0>;
> +					usbc0_orien_sw: endpoint {
> +						remote-endpoint = <&usbdp_phy0_orientation_switch>;
> +					};
> +				};
> +
> +				port@1 {
> +					reg = <1>;
> +					usbc0_role_sw: endpoint {
> +						remote-endpoint = <&dwc3_0_role_switch>;
> +					};
> +				};
> +
> +				port@2 {
> +					reg = <2>;
> +					dp_altmode_mux: endpoint {
> +						remote-endpoint = <&usbdp_phy0_dp_altmode_mux>;
> +					};
> +				};
> +			};
> +		};
> +	};
> +};
> +
> +&i2c8m4_xfer {
> +	rockchip,pins =
> +		/* i2c8_scl_m4 */
> +		<3 RK_PC2 9 &pcfg_pull_up_drv_level_6>,
> +		/* i2c8_sda_m4 */
> +		<3 RK_PC3 9 &pcfg_pull_up_drv_level_6>;
> +};
> +
> +&i2s0_8ch {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&i2s0_lrck
> +		     &i2s0_mclk
> +		     &i2s0_sclk
> +		     &i2s0_sdi0
> +		     &i2s0_sdo0>;
> +	status = "okay";
> +
> +	i2s0_8ch_p0: port {
> +		i2s0_8ch_p0_0: endpoint {
> +			dai-format = "i2s";
> +			mclk-fs = <256>;
> +			remote-endpoint = <&es8316_p0_0>;
> +		};
> +	};
> +};
> +
> +&package_thermal {
> +	polling-delay = <1000>;
> +
> +	trips {
> +		package_fan0: package-fan0 {
> +			hysteresis = <2000>;
> +			temperature = <50000>;
> +			type = "active";
> +		};
> +
> +		package_fan1: package-fan1 {
> +			hysteresis = <2000>;
> +			temperature = <65000>;
> +			type = "active";
> +		};
> +	};
> +
> +	cooling-maps {
> +		map0 {
> +			cooling-device = <&fan0 THERMAL_NO_LIMIT 1>;
> +			trip = <&package_fan0>;
> +		};
> +		map1 {
> +			cooling-device = <&fan0 2 THERMAL_NO_LIMIT>;
> +			trip = <&package_fan1>;
> +		};
> +	};
> +};
> +
> +/* M.2 E-key */
> +&pcie2x1l0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pcie30x1_0_perstn_m1_l>;
> +	reset-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
> +	vpcie3v3-supply = <&vcc3v3_ekey>;
> +	status = "okay";
> +};
> +
> +/* RTL8125B_1 */
> +&pcie2x1l1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pcie30x1_1_perstn>;
> +	reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
> +	vpcie3v3-supply = <&vcc3v3_lan>;
> +	status = "okay";
> +};
> +
> +/* RTL8125B_2 */
> +&pcie2x1l2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pcie20x1_2_perstn>;
> +	reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_HIGH>;
> +	vpcie3v3-supply = <&vcc3v3_lan_phy2>;
> +	status = "okay";
> +};
> +
> +&pcie30phy {
> +	data-lanes = <1 1 2 2>;
> +	/* separate clock lines from the clock generator to phy and devices 
> */
> +	rockchip,rx-common-refclk-mode = <0 0 0 0>;
> +	status = "okay";
> +};
> +
> +/* ASMedia ASM1164 Sata controller */
> +&pcie3x2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pcie30x2_perstn_m1_l>;
> +	reset-gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
> +	vpcie3v3-supply = <&vcc33_io64>;
> +	status = "okay";
> +};
> +
> +/* M.2 M.key */
> +&pcie3x4 {
> +	num-lanes = <2>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pcie30x4_perstn_m1_l>;
> +	reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
> +	vpcie3v3-supply = <&vcc3v3_mkey>;
> +	status = "okay";
> +};
> +
> +&pwm14 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pwm14m1_pins>;
> +	status = "okay";
> +};
> +
> +&saradc {
> +	vref-supply = <&avcc_1v8_s0>;
> +	status = "okay";
> +};
> +
> +&sdhci {
> +	bus-width = <8>;
> +	no-sdio;
> +	no-sd;
> +	non-removable;
> +	max-frequency = <200000000>;
> +	mmc-hs400-1_8v;
> +	mmc-hs400-enhanced-strobe;
> +	mmc-hs200-1_8v;
> +	status = "okay";
> +};
> +
> +&sdmmc {
> +	max-frequency = <200000000>;
> +	no-sdio;
> +	no-mmc;
> +	bus-width = <4>;
> +	cap-mmc-highspeed;
> +	cap-sd-highspeed;
> +	disable-wp;
> +	sd-uhs-sdr104;
> +	vmmc-supply = <&vcc_3v3_s3>;
> +	vqmmc-supply = <&vccio_sd_s0>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&sdmmc_bus4 &sdmmc_clk &sdmmc_cmd &sdmmc_det>;
> +	status = "okay";
> +};
> +
> +/* M.2 E-KEY */
> +&sdio {
> +	broken-cd;
> +	bus-width = <4>;
> +	cap-sdio-irq;
> +	disable-wp;
> +	keep-power-in-suspend;
> +	max-frequency = <150000000>;
> +	mmc-pwrseq = <&sdio_pwrseq>;
> +	no-sd;
> +	no-mmc;
> +	non-removable;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&sdiom0_pins>;
> +	sd-uhs-sdr104;
> +	vmmc-supply = <&vcc3v3_ekey>;
> +	status = "okay";
> +};
> +
> +&sfc {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&fspim2_pins>;
> +	status = "okay";
> +
> +	spi_flash: flash@0 {
> +		compatible = "jedec,spi-nor";
> +		reg = <0x0>;
> +		spi-max-frequency = <50000000>;
> +		spi-rx-bus-width = <4>;
> +		spi-tx-bus-width = <1>;
> +	};
> +};
> +
> +&spi2 {
> +	status = "okay";
> +	assigned-clocks = <&cru CLK_SPI2>;
> +	assigned-clock-rates = <200000000>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
> +	num-cs = <1>;
> +
> +	pmic@0 {
> +		compatible = "rockchip,rk806";
> +		spi-max-frequency = <1000000>;
> +		reg = <0x0>;
> +
> +		interrupt-parent = <&gpio0>;
> +		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
> +
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
> +			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
> +
> +		system-power-controller;
> +
> +		vcc1-supply = <&vcc5v0_sys>;
> +		vcc2-supply = <&vcc5v0_sys>;
> +		vcc3-supply = <&vcc5v0_sys>;
> +		vcc4-supply = <&vcc5v0_sys>;
> +		vcc5-supply = <&vcc5v0_sys>;
> +		vcc6-supply = <&vcc5v0_sys>;
> +		vcc7-supply = <&vcc5v0_sys>;
> +		vcc8-supply = <&vcc5v0_sys>;
> +		vcc9-supply = <&vcc5v0_sys>;
> +		vcc10-supply = <&vcc5v0_sys>;
> +		vcc11-supply = <&vcc_2v0_pldo_s3>;
> +		vcc12-supply = <&vcc5v0_sys>;
> +		vcc13-supply = <&vcc_1v1_nldo_s3>;
> +		vcc14-supply = <&vcc_1v1_nldo_s3>;
> +		vcca-supply = <&vcc5v0_sys>;
> +
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +
> +		rk806_dvs1_null: dvs1-null-pins {
> +			pins = "gpio_pwrctrl1";
> +			function = "pin_fun0";
> +		};
> +
> +		rk806_dvs2_null: dvs2-null-pins {
> +			pins = "gpio_pwrctrl2";
> +			function = "pin_fun0";
> +		};
> +
> +		rk806_dvs3_null: dvs3-null-pins {
> +			pins = "gpio_pwrctrl3";
> +			function = "pin_fun0";
> +		};
> +
> +		regulators {
> +			vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
> +				regulator-boot-on;
> +				regulator-min-microvolt = <550000>;
> +				regulator-max-microvolt = <950000>;
> +				regulator-ramp-delay = <12500>;
> +				regulator-name = "vdd_gpu_s0";
> +				regulator-enable-ramp-delay = <400>;
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <550000>;
> +				regulator-max-microvolt = <950000>;
> +				regulator-ramp-delay = <12500>;
> +				regulator-name = "vdd_cpu_lit_s0";
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			vdd_log_s0: dcdc-reg3 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <675000>;
> +				regulator-max-microvolt = <750000>;
> +				regulator-ramp-delay = <12500>;
> +				regulator-name = "vdd_log_s0";
> +
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +					regulator-suspend-microvolt = <750000>;
> +				};
> +			};
> +
> +			vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <550000>;
> +				regulator-max-microvolt = <950000>;
> +				regulator-ramp-delay = <12500>;
> +				regulator-name = "vdd_vdenc_s0";
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			vdd_ddr_s0: dcdc-reg5 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <675000>;
> +				regulator-max-microvolt = <900000>;
> +				regulator-ramp-delay = <12500>;
> +				regulator-name = "vdd_ddr_s0";
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +					regulator-suspend-microvolt = <850000>;
> +				};
> +			};
> +
> +			vdd2_ddr_s3: dcdc-reg6 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-name = "vdd2_ddr_s3";
> +
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +				};
> +			};
> +
> +			vcc_2v0_pldo_s3: dcdc-reg7 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <2000000>;
> +				regulator-max-microvolt = <2000000>;
> +				regulator-ramp-delay = <12500>;
> +				regulator-name = "vdd_2v0_pldo_s3";
> +
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +					regulator-suspend-microvolt = <2000000>;
> +				};
> +			};
> +
> +			vcc_3v3_s3: dcdc-reg8 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <3300000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-name = "vcc_3v3_s3";
> +
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +					regulator-suspend-microvolt = <3300000>;
> +				};
> +			};
> +
> +			vddq_ddr_s0: dcdc-reg9 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-name = "vddq_ddr_s0";
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			vcc_1v8_s3: dcdc-reg10 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <1800000>;
> +				regulator-name = "vcc_1v8_s3";
> +
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +					regulator-suspend-microvolt = <1800000>;
> +				};
> +			};
> +
> +			avcc_1v8_s0: pldo-reg1 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <1800000>;
> +				regulator-name = "avcc_1v8_s0";
> +
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +					regulator-suspend-microvolt = <1800000>;
> +				};
> +			};
> +
> +			vcc_1v8_s0: pldo-reg2 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <1800000>;
> +				regulator-name = "vcc_1v8_s0";
> +
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +					regulator-suspend-microvolt = <1800000>;
> +				};
> +			};
> +
> +			avdd_1v2_s0: pldo-reg3 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <1200000>;
> +				regulator-max-microvolt = <1200000>;
> +				regulator-name = "avdd_1v2_s0";
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			vcc_3v3_s0: pldo-reg4 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <3300000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-ramp-delay = <12500>;
> +				regulator-name = "vcc_3v3_s0";
> +
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +					regulator-suspend-microvolt = <3300000>;
> +				};
> +			};
> +
> +			vccio_sd_s0: pldo-reg5 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-ramp-delay = <12500>;
> +				regulator-name = "vccio_sd_s0";
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			pldo6_s3: pldo-reg6 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <1800000>;
> +				regulator-name = "pldo6_s3";
> +
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +					regulator-suspend-microvolt = <1800000>;
> +				};
> +			};
> +
> +			vdd_0v75_s3: nldo-reg1 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <750000>;
> +				regulator-max-microvolt = <750000>;
> +				regulator-name = "vdd_0v75_s3";
> +
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +					regulator-suspend-microvolt = <750000>;
> +				};
> +			};
> +
> +			vdd_ddr_pll_s0: nldo-reg2 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <850000>;
> +				regulator-max-microvolt = <850000>;
> +				regulator-name = "vdd_ddr_pll_s0";
> +
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +					regulator-suspend-microvolt = <850000>;
> +				};
> +			};
> +
> +			avdd_0v75_s0: nldo-reg3 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <750000>;
> +				regulator-max-microvolt = <750000>;
> +				regulator-name = "avdd_0v75_s0";
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			vdd_0v85_s0: nldo-reg4 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <850000>;
> +				regulator-max-microvolt = <850000>;
> +				regulator-name = "vdd_0v85_s0";
> +
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +					regulator-suspend-microvolt = <837500>;
> +				};
> +			};
> +
> +			vdd_0v75_s0: nldo-reg5 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <750000>;
> +				regulator-max-microvolt = <750000>;
> +				regulator-name = "vdd_0v75_s0";
> +
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +					regulator-suspend-microvolt = <750000>;
> +				};
> +			};
> +		};
> +	};
> +};
> +
> +&tsadc {
> +	status = "okay";
> +};
> +
> +&uart2 {
> +	pinctrl-0 = <&uart2m0_xfer>;
> +	status = "okay";
> +};
> +
> +/* Connected to M.2 E-key */
> +&uart6 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&uart6m1_xfer &uart6m1_ctsn &uart6m1_rtsn>;
> +	status = "okay";
> +};
> +
> +&u2phy0 {
> +	status = "okay";
> +};
> +
> +&u2phy0_otg {
> +	status = "okay";
> +};
> +
> +&u2phy1 {
> +	status = "okay";
> +};
> +
> +&u2phy1_otg {
> +	/* connected to USB3 hub, which is powered by vcc5v0_usb12 */
> +	phy-supply = <&vcc5v0_usb12>;
> +	status = "okay";
> +};
> +
> +&u2phy2 {
> +	status = "okay";
> +};
> +
> +&u2phy2_host {
> +	/* connected to USB2 hub, which is powered by vcc5v0_usb20 */
> +	phy-supply = <&vcc5v0_usb20>;
> +	status = "okay";
> +};
> +
> +&u2phy3 {
> +	status = "okay";
> +};
> +
> +&u2phy3_host {
> +	phy-supply = <&vcc5v0_usb20>;
> +	status = "okay";
> +};
> +
> +&usb_host0_ehci {
> +	status = "okay";
> +};
> +
> +&usb_host0_ohci {
> +	status = "okay";
> +};
> +
> +&usb_host1_ehci {
> +	status = "okay";
> +};
> +
> +&usb_host1_ohci {
> +	status = "okay";
> +};
> +
> +&usb_host0_xhci {
> +	usb-role-switch;
> +	status = "okay";
> +
> +	port {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		dwc3_0_role_switch: endpoint@0 {
> +			reg = <0>;
> +			remote-endpoint = <&usbc0_role_sw>;
> +		};
> +	};
> +};
> +
> +&usb_host1_xhci {
> +	dr_mode = "host";
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +	status = "okay";
> +
> +	/* 2.0 hub on port 1 */
> +	hub_2_0: hub@1 {
> +		compatible = "usb5e3,610";
> +		reg = <1>;
> +		peer-hub = <&hub_3_0>;
> +		vdd-supply = <&vcc5v0_usb12>;
> +	};
> +
> +	/* 3.0 hub on port 4 */
> +	hub_3_0: hub@2 {
> +		compatible = "usb5e3,620";
> +		reg = <2>;
> +		peer-hub = <&hub_2_0>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&gl3523_reset>;
> +		reset-gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>;
> +		vdd-supply = <&vcc5v0_usb12>;
> +	};
> +};
> +
> +&usbdp_phy0 {
> +	mode-switch;
> +	orientation-switch;
> +	sbu1-dc-gpios = <&gpio4 RK_PB7 GPIO_ACTIVE_HIGH>;
> +	sbu2-dc-gpios = <&gpio4 RK_PC0 GPIO_ACTIVE_HIGH>;
> +	status = "okay";
> +
> +	port {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		usbdp_phy0_orientation_switch: endpoint@0 {
> +			reg = <0>;
> +			remote-endpoint = <&usbc0_orien_sw>;
> +		};
> +
> +		usbdp_phy0_dp_altmode_mux: endpoint@1 {
> +			reg = <1>;
> +			remote-endpoint = <&dp_altmode_mux>;
> +		};
> +	};
> +};
> +
> +&usbdp_phy1 {
> +	rockchip,dp-lane-mux = <2 3>;
> +	status = "okay";
> +};
> +
> +&pinctrl {
> +	hym8563 {
> +		rtc_int: rtc-int {
> +			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
> +		};
> +	};
> +
> +	leds {
> +		led_pins: led-pins {
> +			rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>,
> +					<0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
> +		};
> +	};
> +
> +	pcie {
> +		pcie20x1_2_perstn: pcie20x1-2-perstn {
> +			rockchip,pins = <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
> +		};
> +
> +		pcie30x1_0_perstn_m1_l: pcie30x1-0-perstn-m1-l {
> +			rockchip,pins = <4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
> +		};
> +
> +		pcie30x1_1_perstn: pcie30x1-1-perstn {
> +			rockchip,pins = <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
> +		};
> +
> +		pcie30x2_perstn_m1_l: pcie30x2-perstn-m1-l {
> +			rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
> +		};
> +
> +		pcie30x4_perstn_m1_l: pcie30x4-perstn-m1-l {
> +			rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
> +		};
> +
> +		ekey_en: ekey-en {
> +			rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_down>;
> +		};
> +
> +		pcie30x4_pwren_h: pcie30x4-pwren-h {
> +			rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_down>;
> +		};
> +	};
> +
> +	sound {
> +		hp_detect: hp-detect {
> +			rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_down>;
> +		};
> +	};
> +
> +	usb {
> +		usb_host_pwren_h: usb-host-pwren-h {
> +			rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
> +		};
> +
> +		vcc5v0_otg_en: vcc5v0-otg-en {
> +			rockchip,pins = <2 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
> +		};
> +
> +		gl3523_reset: rl3523-reset {
> +			rockchip,pins = <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
> +		};
> +	};
> +
> +	usb-typec {
> +		usbc0_int: usbc0-int {
> +			rockchip,pins = <3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>;
> +		};
> +
> +		vbus5v0_typec_en: vbus5v0-typec-en {
> +			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
> +		};
> +	};
> +
> +	hdmirx {
> +		hdmirx_det: hdmirx-det {
> +			rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
> +		};
> +	};
> +
> +	sdio-pwrseq {
> +		wifi_enable_h: wifi-enable-h {
> +			rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
> +		};
> +	};
> +
> +	wireless-wlan {
> +		wifi_host_wake_irq: wifi-host-wake-irq {
> +			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_down>;
> +		};
> +	};
> +
> +	bt {
> +		bt_enable_h: bt-enable-h {
> +			rockchip,pins = <2 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
> +		};
> +
> +		bt_host_wake_l: bt-host-wake-l {
> +			rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
> +		};
> +
> +		bt_wake_l: bt-wake-l {
> +			rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
> +		};
> +	};
> +
> +	dp {
> +		dp1_hpd: dp1-hpd {
> +			rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
> +		};
> +	};
> +};
Krzysztof Kozlowski July 4, 2024, 6:28 a.m. UTC | #2
On 03/07/2024 23:05, Heiko Stuebner wrote:

> +/ {
> +	model = "Radxa ROCK 5 ITX";
> +	compatible = "radxa,rock-5itx", "rockchip,rk3588";
> +
> +	aliases {
> +		mmc0 = &sdhci;
> +		mmc1 = &sdmmc;
> +		mmc2 = &sdio;
> +	};
> +
> +	chosen {
> +		stdout-path = "serial2:1500000n8";
> +	};
> +
> +	adc_keys: adc-keys {
> +		compatible = "adc-keys";
> +		io-channels = <&saradc 0>;
> +		io-channel-names = "buttons";
> +		keyup-threshold-microvolt = <1800000>;
> +		poll-interval = <100>;
> +		status = "okay";

Looks like status can be dropped.

> +
> +		button-maskrom {
> +			label = "Mask Rom";
> +			linux,code = <KEY_SETUP>;
> +			press-threshold-microvolt = <1750>;
> +		};
> +	};


Best regards,
Krzysztof
Diederik de Haas July 4, 2024, 9:38 a.m. UTC | #3
Hi Heiko,

Thanks for submitting this. A quick scan indicates it should work with a 
(recent) Debian kernel OOTB :-)

On Wednesday, 3 July 2024 23:05:24 CEST Heiko Stuebner wrote:
> +&sdhci {
> +       bus-width = <8>;
> +       no-sdio;
> +       no-sd;
> +       non-removable;
> +       max-frequency = <200000000>;
> +       mmc-hs400-1_8v;
> +       mmc-hs400-enhanced-strobe;
> +       mmc-hs200-1_8v;
> +       status = "okay";
> +};
> +
> +&sdmmc {
> +       max-frequency = <200000000>;
> +       no-sdio;
> +       no-mmc;
> +       bus-width = <4>;
> +       cap-mmc-highspeed;
> +       cap-sd-highspeed;
> +       disable-wp;
> +       sd-uhs-sdr104;
> +       vmmc-supply = <&vcc_3v3_s3>;
> +       vqmmc-supply = <&vccio_sd_s0>;
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&sdmmc_bus4 &sdmmc_clk &sdmmc_cmd &sdmmc_det>;
> +       status = "okay";
> +};
> +
> +/* M.2 E-KEY */
> +&sdio {
> +       broken-cd;
> +       bus-width = <4>;
> +       cap-sdio-irq;
> +       disable-wp;
> +       keep-power-in-suspend;
> +       max-frequency = <150000000>;
> +       mmc-pwrseq = <&sdio_pwrseq>;
> +       no-sd;
> +       no-mmc;
> +       non-removable;
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&sdiom0_pins>;
> +       sd-uhs-sdr104;
> +       vmmc-supply = <&vcc3v3_ekey>;
> +       status = "okay";
> +};
> +
> +&sfc {
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&fspim2_pins>;
> +       status = "okay";

Shouldn't those properties be sorted alphabetically? Or at least consistently?
Note that the same issue is present on other places too, but I believe the 
above quoted part shows the issue enough.

Cheers,
  Diederik
Heiko Stübner July 4, 2024, 10:05 a.m. UTC | #4
Hi Diederik,

Am Donnerstag, 4. Juli 2024, 11:38:51 CEST schrieb Diederik de Haas:
> Thanks for submitting this. A quick scan indicates it should work with a 
> (recent) Debian kernel OOTB :-)
> 
> On Wednesday, 3 July 2024 23:05:24 CEST Heiko Stuebner wrote:
> > +&sdhci {
> > +       bus-width = <8>;
> > +       no-sdio;
> > +       no-sd;
> > +       non-removable;
> > +       max-frequency = <200000000>;
> > +       mmc-hs400-1_8v;
> > +       mmc-hs400-enhanced-strobe;
> > +       mmc-hs200-1_8v;
> > +       status = "okay";
> > +};
> > +
> > +&sdmmc {
> > +       max-frequency = <200000000>;
> > +       no-sdio;
> > +       no-mmc;
> > +       bus-width = <4>;
> > +       cap-mmc-highspeed;
> > +       cap-sd-highspeed;
> > +       disable-wp;
> > +       sd-uhs-sdr104;
> > +       vmmc-supply = <&vcc_3v3_s3>;
> > +       vqmmc-supply = <&vccio_sd_s0>;
> > +       pinctrl-names = "default";
> > +       pinctrl-0 = <&sdmmc_bus4 &sdmmc_clk &sdmmc_cmd &sdmmc_det>;
> > +       status = "okay";
> > +};
> > +
> > +/* M.2 E-KEY */
> > +&sdio {
> > +       broken-cd;
> > +       bus-width = <4>;
> > +       cap-sdio-irq;
> > +       disable-wp;
> > +       keep-power-in-suspend;
> > +       max-frequency = <150000000>;
> > +       mmc-pwrseq = <&sdio_pwrseq>;
> > +       no-sd;
> > +       no-mmc;
> > +       non-removable;
> > +       pinctrl-names = "default";
> > +       pinctrl-0 = <&sdiom0_pins>;
> > +       sd-uhs-sdr104;
> > +       vmmc-supply = <&vcc3v3_ekey>;
> > +       status = "okay";
> > +};
> > +
> > +&sfc {
> > +       pinctrl-names = "default";
> > +       pinctrl-0 = <&fspim2_pins>;
> > +       status = "okay";
> 
> Shouldn't those properties be sorted alphabetically? Or at least consistently?
> Note that the same issue is present on other places too, but I believe the 
> above quoted part shows the issue enough.

The main sorting is
- compatible
- reg
[... alphabetically ...]
- status

But now that I look at it, you're right there are some non-alphabetical
shenanigans going on there in the sdmmc and sdhci nodes ;-)

Heiko
Alex Bee July 4, 2024, 10:52 a.m. UTC | #5
Am 03.07.24 um 23:05 schrieb Heiko Stuebner:
> The Rock 5 ITX as the name suggests is made in the ITX form factor and
> actually build in a form to be used in a regular case even providing
> connectors for regular front-panel io.
> 
> It can be powered either bei 12V, ATX power-supply or PoE.
> 
> Notable peripherals are the 4 SATA ports, M.2 M-Key slot, M.2 E-key slot,
> 2*2.5Gb pcie-connected ethernet nics.
> 
> As of yet unsupported display options consist of 2*hdmi, DP via type-c,
> eDP + 2*DSI via pcb connectors.
> 
> USB ports are 4*USB3 + 2*USB2 on the back panel and 2-port front-panel
> connector.
> 
> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
> ---
>   arch/arm64/boot/dts/rockchip/Makefile         |    1 +
>   .../boot/dts/rockchip/rk3588-rock-5itx.dts    | 1188 +++++++++++++++++
>   2 files changed, 1189 insertions(+)
>   create mode 100644 arch/arm64/boot/dts/rockchip/rk3588-rock-5itx.dts
> 
> diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
> index e8eba631da23e..0380768586436 100644
> --- a/arch/arm64/boot/dts/rockchip/Makefile
> +++ b/arch/arm64/boot/dts/rockchip/Makefile
> @@ -132,6 +132,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-quartzpro64.dtb
>   dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b.dtb
>   dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b-pcie-ep.dtbo
>   dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b-pcie-srns.dtbo
> +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5itx.dtb
>   dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-tiger-haikou.dtb
>   dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-toybrick-x0.dtb
>   dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-turing-rk1.dtb
> diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5itx.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5itx.dts
> new file mode 100644
> index 0000000000000..41d92ceeeb09c
> --- /dev/null
> +++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5itx.dts
> @@ -0,0 +1,1188 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2022 Rockchip Electronics Co., Ltd.
> + * Copyright (c) 2022 Radxa Limited
> + *
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/leds/common.h>
> +#include <dt-bindings/pinctrl/rockchip.h>
> +#include <dt-bindings/pwm/pwm.h>
> +#include "dt-bindings/usb/pd.h"
> +#include "rk3588.dtsi"
> +
> +/ {
> +	model = "Radxa ROCK 5 ITX";
> +	compatible = "radxa,rock-5itx", "rockchip,rk3588";
> +
> +	aliases {
> +		mmc0 = &sdhci;
> +		mmc1 = &sdmmc;
> +		mmc2 = &sdio;
> +	};
> +
> +	chosen {
> +		stdout-path = "serial2:1500000n8";
> +	};
> +
> +	adc_keys: adc-keys {
> +		compatible = "adc-keys";
> +		io-channels = <&saradc 0>;
> +		io-channel-names = "buttons";
> +		keyup-threshold-microvolt = <1800000>;
> +		poll-interval = <100>;
> +		status = "okay";
> +
> +		button-maskrom {
> +			label = "Mask Rom";
> +			linux,code = <KEY_SETUP>;
> +			press-threshold-microvolt = <1750>;
> +		};
> +	};
> +
> +	analog-sound {
> +		compatible = "audio-graph-card";
> +		label = "rk3588-es8316";
> +
> +		widgets = "Microphone", "Mic Jack",
> +			  "Headphone", "Headphones";
> +
> +		routing = "MIC2", "Mic Jack",
> +			  "Headphones", "HPOL",
> +			  "Headphones", "HPOR";
> +
> +		dais = <&i2s0_8ch_p0>;
> +		hp-det-gpio = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&hp_detect>;
> +	};
> +
> +	gpio-leds {
> +		compatible = "gpio-leds";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&led_pins>;
> +
> +		power-led1 {
> +			gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
> +			linux,default-trigger = "default-on";
> +		};
> +
> +		hdd-led2 {
> +			gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_HIGH>;
> +			linux,default-trigger = "disk-activity";
> +		};
> +	};
> +
> +	fan0: pwm-fan {
> +		compatible = "pwm-fan";
> +		#cooling-cells = <2>;
> +		cooling-levels = <0 64 128 192 255>;
> +		fan-supply = <&vcc12v_dcin>;
> +		pwms = <&pwm14 0 10000 0>;
> +	};
> +
> +	/* M.2 E-KEY */
> +	sdio_pwrseq: sdio-pwrseq {
> +		compatible = "mmc-pwrseq-simple";
> +		clocks = <&hym8563>;
> +		clock-names = "ext_clock";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&wifi_enable_h>;
> +		reset-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_LOW>;
> +	};
> +
> +	typec_vin: regulator-typec-vin {
> +		compatible = "regulator-fixed";
> +		enable-active-high;
> +		gpio = <&gpio1 RK_PB6 GPIO_ACTIVE_HIGH>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&vbus5v0_typec_en>;
> +		regulator-name = "typec_vin";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		vin-supply = <&vcc5v0_sys>;
> +	};
> +
> +	vcc12v_dcin: regulator-vcc12v-dcin {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc12v_dcin";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-min-microvolt = <12000000>;
> +		regulator-max-microvolt = <12000000>;
> +	};
> +
> +	vcc33_io64: regulator-vcc33-io64 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc33_io64";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		vin-supply = <&vcc12v_dcin>;
> +	};
> +
> +	vcc3v3_ekey: regulator-vcc3v3-ekey {
> +		compatible = "regulator-fixed";
> +		enable-active-high;
> +		gpios = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&ekey_en>;
> +		regulator-name = "vcc3v3_ekey";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		startup-delay-us = <50000>;
> +		vin-supply = <&vcc5v0_sys>;
> +	};
> +
> +	vcc3v3_lan: vcc3v3_lan_phy2: regulator-vcc3v3-lan {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc3v3_lan";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		vin-supply = <&vcc_3v3_s3>;
> +	};
> +
> +	vcc3v3_mkey: regulator-vcc3v3-mkey {
> +		compatible = "regulator-fixed";
> +		enable-active-high;
> +		gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pcie30x4_pwren_h>;
> +		regulator-name = "vcc3v3_mkey";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		startup-delay-us = <5000>;
> +		vin-supply = <&vcc5v0_sys>;
> +	};
> +
> +	vcc3v3_sys: regulator-vcc3v3-sys {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc3v3_sys";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		vin-supply = <&vcc12v_dcin>;
> +	};
> +
> +	vcc5v0_sys: regulator-vcc5v0-sys {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc5v0_sys";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		vin-supply = <&vcc12v_dcin>;
> +	};
> +
> +	vcc5v0_usb20: vcc5v0_usb12: vcc5v0_usb34: regulator-vcc5v0-usb {
> +		compatible = "regulator-fixed";
> +		enable-active-high;
> +		gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&usb_host_pwren_h>;
> +		regulator-name = "vcc5v0_usb";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		vin-supply = <&vcc5v0_sys>;
> +	};
> +
> +	vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc_1v1_nldo_s3";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-min-microvolt = <1100000>;
> +		regulator-max-microvolt = <1100000>;
> +		vin-supply = <&vcc5v0_sys>;
> +	};
> +};
> +
> +&combphy0_ps {
> +	status = "okay";
> +};
> +
> +&combphy1_ps {
> +	status = "okay";
> +};
> +
> +&combphy2_psu {
> +	status = "okay";
> +};
> +
> +&cpu_b0 {
> +	cpu-supply = <&vdd_cpu_big0_s0>;
> +};
> +
> +&cpu_b1 {
> +	cpu-supply = <&vdd_cpu_big0_s0>;
> +};
> +
> +&cpu_b2 {
> +	cpu-supply = <&vdd_cpu_big1_s0>;
> +};
> +
> +&cpu_b3 {
> +	cpu-supply = <&vdd_cpu_big1_s0>;
> +};
> +
> +&cpu_l0 {
> +	cpu-supply = <&vdd_cpu_lit_s0>;
> +};
> +
> +&cpu_l1 {
> +	cpu-supply = <&vdd_cpu_lit_s0>;
> +};
> +
> +&cpu_l2 {
> +	cpu-supply = <&vdd_cpu_lit_s0>;
> +};
> +
> +&cpu_l3 {
> +	cpu-supply = <&vdd_cpu_lit_s0>;
> +};
> +
> +&gpu {
> +	mali-supply = <&vdd_gpu_s0>;
> +	status = "okay";
> +};
> +
> +&i2c0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&i2c0m2_xfer>;
> +	status = "okay";
> +
> +	vdd_cpu_big0_s0: regulator@42 {
> +		compatible = "rockchip,rk8602";
> +		reg = <0x42>;
> +		fcs,suspend-voltage-selector = <1>;
> +		regulator-name = "vdd_cpu_big0_s0";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-min-microvolt = <550000>;
> +		regulator-max-microvolt = <1050000>;
> +		regulator-ramp-delay = <2300>;
> +		vin-supply = <&vcc5v0_sys>;
> +
> +		regulator-state-mem {
> +			regulator-off-in-suspend;
> +		};
> +	};
> +
> +	vdd_cpu_big1_s0: regulator@43 {
> +		compatible = "rockchip,rk8603", "rockchip,rk8602";
> +		reg = <0x43>;
> +		fcs,suspend-voltage-selector = <1>;
> +		regulator-name = "vdd_cpu_big1_s0";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-min-microvolt = <550000>;
> +		regulator-max-microvolt = <1050000>;
> +		regulator-ramp-delay = <2300>;
> +		vin-supply = <&vcc5v0_sys>;
> +
> +		regulator-state-mem {
> +			regulator-off-in-suspend;
> +		};
> +	};
> +};
> +
> +&i2c1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&i2c1m2_xfer>;
> +	status = "okay";
> +
> +	vdd_npu_s0: regulator@42 {
> +		compatible = "rockchip,rk8602";
> +		reg = <0x42>;
> +		fcs,suspend-voltage-selector = <1>;
> +		regulator-name = "vdd_npu_s0";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-min-microvolt = <550000>;
> +		regulator-max-microvolt = <950000>;
> +		regulator-ramp-delay = <2300>;
> +		vin-supply = <&vcc5v0_sys>;
> +
> +		regulator-state-mem {
> +			regulator-off-in-suspend;
> +		};
> +	};
> +};
> +
> +/* CAM0 connector */
> +&i2c3 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&i2c3m0_xfer>;
> +};
> +
> +/* M.2 E-key */
> +&i2c4 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&i2c4m1_xfer>;
> +};
> +
> +/* RTC and LCD0 connector */
> +&i2c6 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&i2c6m0_xfer>;
> +	status = "okay";
> +
> +	hym8563: rtc@51 {
> +		compatible = "haoyu,hym8563";
> +		reg = <0x51>;
> +		#clock-cells = <0>;
> +		clock-output-names = "wifi_32kout";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&rtc_int>;
> +		interrupt-parent = <&gpio0>;
> +		interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
> +	};
> +};
> +
> +/* Audio codec and CAM1 connector */
> +&i2c7 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&i2c7m0_xfer>;
> +	status = "okay";
> +
> +	es8316: audio-codec@11 {
> +		compatible = "everest,es8316";
> +		reg = <0x11>;
> +		clocks = <&cru I2S0_8CH_MCLKOUT>;
> +		clock-names = "mclk";
> +		assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
> +		assigned-clock-rates = <12288000>;
> +		#sound-dai-cells = <0>;
> +
> +		port {
> +			es8316_p0_0: endpoint {
> +				remote-endpoint = <&i2s0_8ch_p0_0>;
> +			};
> +		};
> +	};
> +};
> +
> +/* FUSB302 and LCD1 connector */
> +&i2c8 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&i2c8m4_xfer>;
> +	status = "okay";
> +
> +	usbc0: usb-typec@22 {
> +		compatible = "fcs,fusb302";
> +		reg = <0x22>;
> +		interrupt-parent = <&gpio3>;
> +		interrupts = <RK_PB4 IRQ_TYPE_LEVEL_LOW>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&usbc0_int>;
> +		vbus-supply = <&typec_vin>;
> +
> +		usb_con: connector {
> +			compatible = "usb-c-connector";
> +			label = "USB-C";
> +			data-role = "dual";
> +			power-role = "dual";
> +			try-power-role = "sink";
> +			op-sink-microwatt = <1000000>;
> +			sink-pdos =
> +				<PDO_FIXED(5000, 1000, PDO_FIXED_USB_COMM)>;
> +			source-pdos =
> +				<PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
> +
> +			ports {
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +
> +				port@0 {
> +					reg = <0>;
> +					usbc0_orien_sw: endpoint {
> +						remote-endpoint = <&usbdp_phy0_orientation_switch>;
> +					};
> +				};
> +
> +				port@1 {
> +					reg = <1>;
> +					usbc0_role_sw: endpoint {
> +						remote-endpoint = <&dwc3_0_role_switch>;
> +					};
> +				};
> +
> +				port@2 {
> +					reg = <2>;
> +					dp_altmode_mux: endpoint {
> +						remote-endpoint = <&usbdp_phy0_dp_altmode_mux>;
> +					};
> +				};
> +			};
> +		};
> +	};
> +};
> +
> +&i2c8m4_xfer {
> +	rockchip,pins =
> +		/* i2c8_scl_m4 */
> +		<3 RK_PC2 9 &pcfg_pull_up_drv_level_6>,
> +		/* i2c8_sda_m4 */
> +		<3 RK_PC3 9 &pcfg_pull_up_drv_level_6>;
> +};
> +
> +&i2s0_8ch {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&i2s0_lrck
> +		     &i2s0_mclk
> +		     &i2s0_sclk
> +		     &i2s0_sdi0
> +		     &i2s0_sdo0>;
> +	status = "okay";
> +
> +	i2s0_8ch_p0: port {
> +		i2s0_8ch_p0_0: endpoint {
> +			dai-format = "i2s";
> +			mclk-fs = <256>;
> +			remote-endpoint = <&es8316_p0_0>;
> +		};
> +	};
> +};
> +
> +&package_thermal {
> +	polling-delay = <1000>;
> +
> +	trips {
> +		package_fan0: package-fan0 {
> +			hysteresis = <2000>;
> +			temperature = <50000>;
> +			type = "active";
> +		};
> +
> +		package_fan1: package-fan1 {
> +			hysteresis = <2000>;
> +			temperature = <65000>;
> +			type = "active";
> +		};
> +	};
> +
> +	cooling-maps {
> +		map0 {
> +			cooling-device = <&fan0 THERMAL_NO_LIMIT 1>;
> +			trip = <&package_fan0>;
> +		};
> +		map1 {
> +			cooling-device = <&fan0 2 THERMAL_NO_LIMIT>;
> +			trip = <&package_fan1>;
> +		};
> +	};
> +};
> +
> +/* M.2 E-key */
> +&pcie2x1l0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pcie30x1_0_perstn_m1_l>;
> +	reset-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
> +	vpcie3v3-supply = <&vcc3v3_ekey>;
> +	status = "okay";
> +};
> +
> +/* RTL8125B_1 */
> +&pcie2x1l1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pcie30x1_1_perstn>;
> +	reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
> +	vpcie3v3-supply = <&vcc3v3_lan>;
> +	status = "okay";
> +};
> +
> +/* RTL8125B_2 */
> +&pcie2x1l2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pcie20x1_2_perstn>;
> +	reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_HIGH>;
> +	vpcie3v3-supply = <&vcc3v3_lan_phy2>;
> +	status = "okay";
> +};
> +
> +&pcie30phy {
> +	data-lanes = <1 1 2 2>;
> +	/* separate clock lines from the clock generator to phy and devices */
> +	rockchip,rx-common-refclk-mode = <0 0 0 0>;
> +	status = "okay";
> +};
> +
> +/* ASMedia ASM1164 Sata controller */
> +&pcie3x2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pcie30x2_perstn_m1_l>;
> +	reset-gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
> +	vpcie3v3-supply = <&vcc33_io64>;
> +	status = "okay";
> +};
> +
> +/* M.2 M.key */
> +&pcie3x4 {
> +	num-lanes = <2>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pcie30x4_perstn_m1_l>;
> +	reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
> +	vpcie3v3-supply = <&vcc3v3_mkey>;
> +	status = "okay";
> +};
> +
> +&pwm14 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pwm14m1_pins>;
> +	status = "okay";
> +};
> +
> +&saradc {
> +	vref-supply = <&avcc_1v8_s0>;
> +	status = "okay";
> +};
> +
> +&sdhci {
> +	bus-width = <8>;
> +	no-sdio;
> +	no-sd;
> +	non-removable;
> +	max-frequency = <200000000>;
> +	mmc-hs400-1_8v;
> +	mmc-hs400-enhanced-strobe;
> +	mmc-hs200-1_8v;
> +	status = "okay";
> +};
> +
> +&sdmmc {
> +	max-frequency = <200000000>;
> +	no-sdio;
> +	no-mmc;
> +	bus-width = <4>;
> +	cap-mmc-highspeed;
> +	cap-sd-highspeed;
> +	disable-wp;
> +	sd-uhs-sdr104;
> +	vmmc-supply = <&vcc_3v3_s3>;
> +	vqmmc-supply = <&vccio_sd_s0>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&sdmmc_bus4 &sdmmc_clk &sdmmc_cmd &sdmmc_det>;
> +	status = "okay";
> +};
> +
> +/* M.2 E-KEY */
> +&sdio {
> +	broken-cd;
> +	bus-width = <4>;
> +	cap-sdio-irq;
> +	disable-wp;
> +	keep-power-in-suspend;
> +	max-frequency = <150000000>;
> +	mmc-pwrseq = <&sdio_pwrseq>;
> +	no-sd;
> +	no-mmc;
> +	non-removable;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&sdiom0_pins>;
> +	sd-uhs-sdr104;
> +	vmmc-supply = <&vcc3v3_ekey>;
> +	status = "okay";
> +};
> +
> +&sfc {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&fspim2_pins>;
> +	status = "okay";
> +
> +	spi_flash: flash@0 {
> +		compatible = "jedec,spi-nor";
> +		reg = <0x0>;
> +		spi-max-frequency = <50000000>;
> +		spi-rx-bus-width = <4>;
> +		spi-tx-bus-width = <1>;
> +	};
> +};
> +
> +&spi2 {
> +	status = "okay";
> +	assigned-clocks = <&cru CLK_SPI2>;
> +	assigned-clock-rates = <200000000>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
> +	num-cs = <1>;
> +
> +	pmic@0 {
> +		compatible = "rockchip,rk806";
> +		spi-max-frequency = <1000000>;
> +		reg = <0x0>;
> +
> +		interrupt-parent = <&gpio0>;
> +		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
> +
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
> +			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
> +
> +		system-power-controller;
> +
> +		vcc1-supply = <&vcc5v0_sys>;
> +		vcc2-supply = <&vcc5v0_sys>;
> +		vcc3-supply = <&vcc5v0_sys>;
> +		vcc4-supply = <&vcc5v0_sys>;
> +		vcc5-supply = <&vcc5v0_sys>;
> +		vcc6-supply = <&vcc5v0_sys>;
> +		vcc7-supply = <&vcc5v0_sys>;
> +		vcc8-supply = <&vcc5v0_sys>;
> +		vcc9-supply = <&vcc5v0_sys>;
> +		vcc10-supply = <&vcc5v0_sys>;
> +		vcc11-supply = <&vcc_2v0_pldo_s3>;
> +		vcc12-supply = <&vcc5v0_sys>;
> +		vcc13-supply = <&vcc_1v1_nldo_s3>;
> +		vcc14-supply = <&vcc_1v1_nldo_s3>;
> +		vcca-supply = <&vcc5v0_sys>;
> +
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +
> +		rk806_dvs1_null: dvs1-null-pins {
> +			pins = "gpio_pwrctrl1";
> +			function = "pin_fun0";
> +		};
> +
> +		rk806_dvs2_null: dvs2-null-pins {
> +			pins = "gpio_pwrctrl2";
> +			function = "pin_fun0";
> +		};
> +
> +		rk806_dvs3_null: dvs3-null-pins {
> +			pins = "gpio_pwrctrl3";
> +			function = "pin_fun0";
> +		};
> +
> +		regulators {
> +			vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
> +				regulator-boot-on;
> +				regulator-min-microvolt = <550000>;
> +				regulator-max-microvolt = <950000>;
> +				regulator-ramp-delay = <12500>;
> +				regulator-name = "vdd_gpu_s0";
> +				regulator-enable-ramp-delay = <400>;
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <550000>;
> +				regulator-max-microvolt = <950000>;
> +				regulator-ramp-delay = <12500>;
> +				regulator-name = "vdd_cpu_lit_s0";
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			vdd_log_s0: dcdc-reg3 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <675000>;
> +				regulator-max-microvolt = <750000>;
> +				regulator-ramp-delay = <12500>;
> +				regulator-name = "vdd_log_s0";
> +
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +					regulator-suspend-microvolt = <750000>;
> +				};
> +			};
> +
> +			vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <550000>;
> +				regulator-max-microvolt = <950000>;
> +				regulator-ramp-delay = <12500>;
> +				regulator-name = "vdd_vdenc_s0";
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			vdd_ddr_s0: dcdc-reg5 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <675000>;
> +				regulator-max-microvolt = <900000>;
> +				regulator-ramp-delay = <12500>;
> +				regulator-name = "vdd_ddr_s0";
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +					regulator-suspend-microvolt = <850000>;
> +				};
> +			};
> +
> +			vdd2_ddr_s3: dcdc-reg6 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-name = "vdd2_ddr_s3";
> +
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +				};
> +			};
> +
> +			vcc_2v0_pldo_s3: dcdc-reg7 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <2000000>;
> +				regulator-max-microvolt = <2000000>;
> +				regulator-ramp-delay = <12500>;
> +				regulator-name = "vdd_2v0_pldo_s3";
> +
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +					regulator-suspend-microvolt = <2000000>;
> +				};
> +			};
> +
> +			vcc_3v3_s3: dcdc-reg8 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <3300000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-name = "vcc_3v3_s3";
> +
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +					regulator-suspend-microvolt = <3300000>;
> +				};
> +			};
> +
> +			vddq_ddr_s0: dcdc-reg9 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-name = "vddq_ddr_s0";
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			vcc_1v8_s3: dcdc-reg10 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <1800000>;
> +				regulator-name = "vcc_1v8_s3";
> +
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +					regulator-suspend-microvolt = <1800000>;
> +				};
> +			};
> +
> +			avcc_1v8_s0: pldo-reg1 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <1800000>;
> +				regulator-name = "avcc_1v8_s0";
> +
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +					regulator-suspend-microvolt = <1800000>;
> +				};
> +			};
> +
> +			vcc_1v8_s0: pldo-reg2 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <1800000>;
> +				regulator-name = "vcc_1v8_s0";
> +
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +					regulator-suspend-microvolt = <1800000>;
> +				};
> +			};
> +
> +			avdd_1v2_s0: pldo-reg3 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <1200000>;
> +				regulator-max-microvolt = <1200000>;
> +				regulator-name = "avdd_1v2_s0";
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			vcc_3v3_s0: pldo-reg4 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <3300000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-ramp-delay = <12500>;
> +				regulator-name = "vcc_3v3_s0";
> +
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +					regulator-suspend-microvolt = <3300000>;
> +				};
> +			};
> +
> +			vccio_sd_s0: pldo-reg5 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-ramp-delay = <12500>;
> +				regulator-name = "vccio_sd_s0";
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			pldo6_s3: pldo-reg6 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <1800000>;
> +				regulator-name = "pldo6_s3";
> +
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +					regulator-suspend-microvolt = <1800000>;
> +				};
> +			};
> +
> +			vdd_0v75_s3: nldo-reg1 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <750000>;
> +				regulator-max-microvolt = <750000>;
> +				regulator-name = "vdd_0v75_s3";
> +
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +					regulator-suspend-microvolt = <750000>;
> +				};
> +			};
> +
> +			vdd_ddr_pll_s0: nldo-reg2 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <850000>;
> +				regulator-max-microvolt = <850000>;
> +				regulator-name = "vdd_ddr_pll_s0";
> +
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +					regulator-suspend-microvolt = <850000>;
> +				};
> +			};
> +
> +			avdd_0v75_s0: nldo-reg3 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <750000>;
> +				regulator-max-microvolt = <750000>;
> +				regulator-name = "avdd_0v75_s0";
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			vdd_0v85_s0: nldo-reg4 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <850000>;
> +				regulator-max-microvolt = <850000>;
> +				regulator-name = "vdd_0v85_s0";
> +
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +					regulator-suspend-microvolt = <837500>;
> +				};
> +			};
> +
> +			vdd_0v75_s0: nldo-reg5 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <750000>;
> +				regulator-max-microvolt = <750000>;
> +				regulator-name = "vdd_0v75_s0";
> +
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +					regulator-suspend-microvolt = <750000>;
> +				};
> +			};
> +		};
> +	};
> +};
> +
> +&tsadc {
> +	status = "okay";
> +};
> +
> +&uart2 {
> +	pinctrl-0 = <&uart2m0_xfer>;
> +	status = "okay";
> +};
> +
> +/* Connected to M.2 E-key */
> +&uart6 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&uart6m1_xfer &uart6m1_ctsn &uart6m1_rtsn>;
> +	status = "okay";
> +};
> +
> +&u2phy0 {
> +	status = "okay";
> +};
> +
> +&u2phy0_otg {
> +	status = "okay";
> +};
> +
> +&u2phy1 {
> +	status = "okay";
> +};
> +
> +&u2phy1_otg {
> +	/* connected to USB3 hub, which is powered by vcc5v0_usb12 */
> +	phy-supply = <&vcc5v0_usb12>;
> +	status = "okay";
> +};
> +
> +&u2phy2 {
> +	status = "okay";
> +};
> +
> +&u2phy2_host {
> +	/* connected to USB2 hub, which is powered by vcc5v0_usb20 */
> +	phy-supply = <&vcc5v0_usb20>;
> +	status = "okay";
> +};
> +
> +&u2phy3 {
> +	status = "okay";
> +};
> +
> +&u2phy3_host {
> +	phy-supply = <&vcc5v0_usb20>;
> +	status = "okay";
> +};
> +
> +&usb_host0_ehci {
> +	status = "okay";
> +};
> +
> +&usb_host0_ohci {
> +	status = "okay";
> +};
> +
> +&usb_host1_ehci {
> +	status = "okay";
> +};
> +
> +&usb_host1_ohci {
> +	status = "okay";
> +};
> +
> +&usb_host0_xhci {
> +	usb-role-switch;
> +	status = "okay";
> +
> +	port {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		dwc3_0_role_switch: endpoint@0 {
> +			reg = <0>;
> +			remote-endpoint = <&usbc0_role_sw>;
> +		};
> +	};
> +};
> +
> +&usb_host1_xhci {
> +	dr_mode = "host";
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +	status = "okay";
> +
> +	/* 2.0 hub on port 1 */
> +	hub_2_0: hub@1 {
> +		compatible = "usb5e3,610";
> +		reg = <1>;
> +		peer-hub = <&hub_3_0>;
> +		vdd-supply = <&vcc5v0_usb12>;
Are you sure about this one? I couldn't find any schematics for this board,
but both the bindings for usb5e3,610 and the datasheet[0] are saying this
is the supply for the hub's internal logic which is typically ~3.3V. It's
definitely not a supply for the vbus.

[0] http://www.sunnyqi.com/upLoad/product/month_1308/GL852G.pdf

> +	};
> +
> +	/* 3.0 hub on port 4 */
> +	hub_3_0: hub@2 {
> +		compatible = "usb5e3,620";
> +		reg = <2>;
> +		peer-hub = <&hub_2_0>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&gl3523_reset>;
> +		reset-gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>;
> +		vdd-supply = <&vcc5v0_usb12>;
> +	};
> +};
> +
> +&usbdp_phy0 {
> +	mode-switch;
> +	orientation-switch;
> +	sbu1-dc-gpios = <&gpio4 RK_PB7 GPIO_ACTIVE_HIGH>;
> +	sbu2-dc-gpios = <&gpio4 RK_PC0 GPIO_ACTIVE_HIGH>;
> +	status = "okay";
> +
> +	port {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		usbdp_phy0_orientation_switch: endpoint@0 {
> +			reg = <0>;
> +			remote-endpoint = <&usbc0_orien_sw>;
> +		};
> +
> +		usbdp_phy0_dp_altmode_mux: endpoint@1 {
> +			reg = <1>;
> +			remote-endpoint = <&dp_altmode_mux>;
> +		};
> +	};
> +};
> +
> +&usbdp_phy1 {
> +	rockchip,dp-lane-mux = <2 3>;
> +	status = "okay";
> +};
> +
> +&pinctrl {
> +	hym8563 {
> +		rtc_int: rtc-int {
> +			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
> +		};
> +	};
> +
> +	leds {
> +		led_pins: led-pins {
> +			rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>,
> +					<0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
> +		};
> +	};
> +
> +	pcie {
> +		pcie20x1_2_perstn: pcie20x1-2-perstn {
> +			rockchip,pins = <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
> +		};
> +
> +		pcie30x1_0_perstn_m1_l: pcie30x1-0-perstn-m1-l {
> +			rockchip,pins = <4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
> +		};
> +
> +		pcie30x1_1_perstn: pcie30x1-1-perstn {
> +			rockchip,pins = <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
> +		};
> +
> +		pcie30x2_perstn_m1_l: pcie30x2-perstn-m1-l {
> +			rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
> +		};
> +
> +		pcie30x4_perstn_m1_l: pcie30x4-perstn-m1-l {
> +			rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
> +		};
> +
> +		ekey_en: ekey-en {
> +			rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_down>;
> +		};
> +
> +		pcie30x4_pwren_h: pcie30x4-pwren-h {
> +			rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_down>;
> +		};
> +	};
> +
> +	sound {
> +		hp_detect: hp-detect {
> +			rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_down>;
> +		};
> +	};
> +
> +	usb {
> +		usb_host_pwren_h: usb-host-pwren-h {
> +			rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
> +		};
> +
> +		vcc5v0_otg_en: vcc5v0-otg-en {
> +			rockchip,pins = <2 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
> +		};
> +
> +		gl3523_reset: rl3523-reset {
> +			rockchip,pins = <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
> +		};
> +	};
> +
> +	usb-typec {
> +		usbc0_int: usbc0-int {
> +			rockchip,pins = <3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>;
> +		};
> +
> +		vbus5v0_typec_en: vbus5v0-typec-en {
> +			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
> +		};
> +	};
> +
> +	hdmirx {
> +		hdmirx_det: hdmirx-det {
> +			rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
> +		};
> +	};
> +
> +	sdio-pwrseq {
> +		wifi_enable_h: wifi-enable-h {
> +			rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
> +		};
> +	};
> +
> +	wireless-wlan {
> +		wifi_host_wake_irq: wifi-host-wake-irq {
> +			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_down>;
> +		};
> +	};
> +
> +	bt {
> +		bt_enable_h: bt-enable-h {
> +			rockchip,pins = <2 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
> +		};
> +
> +		bt_host_wake_l: bt-host-wake-l {
> +			rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
> +		};
> +
> +		bt_wake_l: bt-wake-l {
> +			rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
> +		};
> +	};
> +
> +	dp {
> +		dp1_hpd: dp1-hpd {
> +			rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
> +		};
> +	};
> +};
Heiko Stübner July 4, 2024, 11:21 a.m. UTC | #6
Hi Alex,

Am Donnerstag, 4. Juli 2024, 12:52:35 CEST schrieb Alex Bee:
> Am 03.07.24 um 23:05 schrieb Heiko Stuebner:
> > The Rock 5 ITX as the name suggests is made in the ITX form factor and
> > actually build in a form to be used in a regular case even providing
> > connectors for regular front-panel io.
> > 
> > It can be powered either bei 12V, ATX power-supply or PoE.
> > 
> > Notable peripherals are the 4 SATA ports, M.2 M-Key slot, M.2 E-key slot,
> > 2*2.5Gb pcie-connected ethernet nics.
> > 
> > As of yet unsupported display options consist of 2*hdmi, DP via type-c,
> > eDP + 2*DSI via pcb connectors.
> > 
> > USB ports are 4*USB3 + 2*USB2 on the back panel and 2-port front-panel
> > connector.
> > 
> > Signed-off-by: Heiko Stuebner <heiko@sntech.de>
> > ---

> > +&usb_host1_xhci {
> > +	dr_mode = "host";
> > +	#address-cells = <1>;
> > +	#size-cells = <0>;
> > +	status = "okay";
> > +
> > +	/* 2.0 hub on port 1 */
> > +	hub_2_0: hub@1 {
> > +		compatible = "usb5e3,610";
> > +		reg = <1>;
> > +		peer-hub = <&hub_3_0>;
> > +		vdd-supply = <&vcc5v0_usb12>;
> Are you sure about this one? I couldn't find any schematics for this board,
> but both the bindings for usb5e3,610 and the datasheet[0] are saying this
> is the supply for the hub's internal logic which is typically ~3.3V. It's
> definitely not a supply for the vbus.
> 
> [0] http://www.sunnyqi.com/upLoad/product/month_1308/GL852G.pdf

yeah, you're right. The vdd-supply is coming from vcc_3v3 it seems
vcc5v0_usb12 is the phy supply instead.

Will fix that in v3.

Thanks for catching that
Heiko
Alex Bee July 4, 2024, 11:43 a.m. UTC | #7
Am 04.07.24 um 12:05 schrieb Heiko Stübner:
> Hi Diederik,
> 
> Am Donnerstag, 4. Juli 2024, 11:38:51 CEST schrieb Diederik de Haas:
>> Thanks for submitting this. A quick scan indicates it should work with a
>> (recent) Debian kernel OOTB :-)
>>
>> On Wednesday, 3 July 2024 23:05:24 CEST Heiko Stuebner wrote:
>>> +&sdhci {
>>> +       bus-width = <8>;
>>> +       no-sdio;
>>> +       no-sd;
>>> +       non-removable;
>>> +       max-frequency = <200000000>;
>>> +       mmc-hs400-1_8v;
>>> +       mmc-hs400-enhanced-strobe;
>>> +       mmc-hs200-1_8v;
>>> +       status = "okay";
>>> +};
>>> +
>>> +&sdmmc {
>>> +       max-frequency = <200000000>;
>>> +       no-sdio;
>>> +       no-mmc;
>>> +       bus-width = <4>;
>>> +       cap-mmc-highspeed;
>>> +       cap-sd-highspeed;
>>> +       disable-wp;
>>> +       sd-uhs-sdr104;
>>> +       vmmc-supply = <&vcc_3v3_s3>;
>>> +       vqmmc-supply = <&vccio_sd_s0>;
>>> +       pinctrl-names = "default";
>>> +       pinctrl-0 = <&sdmmc_bus4 &sdmmc_clk &sdmmc_cmd &sdmmc_det>;
>>> +       status = "okay";
>>> +};
>>> +
>>> +/* M.2 E-KEY */
>>> +&sdio {
>>> +       broken-cd;
>>> +       bus-width = <4>;
>>> +       cap-sdio-irq;
>>> +       disable-wp;
>>> +       keep-power-in-suspend;
>>> +       max-frequency = <150000000>;
>>> +       mmc-pwrseq = <&sdio_pwrseq>;
>>> +       no-sd;
>>> +       no-mmc;
>>> +       non-removable;
>>> +       pinctrl-names = "default";
>>> +       pinctrl-0 = <&sdiom0_pins>;
>>> +       sd-uhs-sdr104;
>>> +       vmmc-supply = <&vcc3v3_ekey>;
>>> +       status = "okay";
>>> +};
>>> +
>>> +&sfc {
>>> +       pinctrl-names = "default";
>>> +       pinctrl-0 = <&fspim2_pins>;
>>> +       status = "okay";
>>
>> Shouldn't those properties be sorted alphabetically? Or at least consistently?
>> Note that the same issue is present on other places too, but I believe the
>> above quoted part shows the issue enough.
> 
> The main sorting is
> - compatible
> - reg
> [... alphabetically ...]
> - status
> 
Yeah ... that's always the question when adding new board files. Do it like
"it's always been done" or re-sort the properties alphanumeric _everywhere_
which looks quite strange at times. If I'm getting the newly added dt
coding style correctly common (subsystem?) properties should also be placed
before vendor (driver?) specific ones. Yet I didn't see a board file which
places 'regulator-max-microvolt' before 'regulator-min-microvolt'. So I
guess it's fine if it's done consistently within the same file?

Alex
> But now that I look at it, you're right there are some non-alphabetical
> shenanigans going on there in the sdmmc and sdhci nodes ;-)
> 
> Heiko
> 
> 
> 
> _______________________________________________
> Linux-rockchip mailing list
> Linux-rockchip@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-rockchip
Dragan Simic July 4, 2024, 12:04 p.m. UTC | #8
Hello Alex and Heiko,

On 2024-07-04 12:52, Alex Bee wrote:
> Am 03.07.24 um 23:05 schrieb Heiko Stuebner:
>> The Rock 5 ITX as the name suggests is made in the ITX form factor and
>> actually build in a form to be used in a regular case even providing
>> connectors for regular front-panel io.
>> 
>> It can be powered either bei 12V, ATX power-supply or PoE.
>> 
>> Notable peripherals are the 4 SATA ports, M.2 M-Key slot, M.2 E-key 
>> slot,
>> 2*2.5Gb pcie-connected ethernet nics.
>> 
>> As of yet unsupported display options consist of 2*hdmi, DP via 
>> type-c,
>> eDP + 2*DSI via pcb connectors.
>> 
>> USB ports are 4*USB3 + 2*USB2 on the back panel and 2-port front-panel
>> connector.
>> 
>> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
>> ---
>>   arch/arm64/boot/dts/rockchip/Makefile         |    1 +
>>   .../boot/dts/rockchip/rk3588-rock-5itx.dts    | 1188 
>> +++++++++++++++++
>>   2 files changed, 1189 insertions(+)
>>   create mode 100644 arch/arm64/boot/dts/rockchip/rk3588-rock-5itx.dts

[snip]

>> +&usb_host1_xhci {
>> +	dr_mode = "host";
>> +	#address-cells = <1>;
>> +	#size-cells = <0>;
>> +	status = "okay";
>> +
>> +	/* 2.0 hub on port 1 */
>> +	hub_2_0: hub@1 {
>> +		compatible = "usb5e3,610";
>> +		reg = <1>;
>> +		peer-hub = <&hub_3_0>;
>> +		vdd-supply = <&vcc5v0_usb12>;
> 
> Are you sure about this one? I couldn't find any schematics for this 
> board,
> but both the bindings for usb5e3,610 and the datasheet[0] are saying 
> this
> is the supply for the hub's internal logic which is typically ~3.3V. 
> It's
> definitely not a supply for the vbus.
> 
> [0] http://www.sunnyqi.com/upLoad/product/month_1308/GL852G.pdf

FYI, here's the board schematic:

- https://dl.radxa.com/rock5/5itx/radxa_rock_5_itx_X1100_schematic.pdf
- 
https://dl.radxa.com/rock5/5itx/v1110/radxa_rock_5itx_v1110_schematic.pdf

Perhaps it would be good to include these URLs in the v3 patch 
description.
Heiko Stübner July 4, 2024, 12:05 p.m. UTC | #9
Am Donnerstag, 4. Juli 2024, 13:43:47 CEST schrieb Alex Bee:
> Am 04.07.24 um 12:05 schrieb Heiko Stübner:
> > Hi Diederik,
> > 
> > Am Donnerstag, 4. Juli 2024, 11:38:51 CEST schrieb Diederik de Haas:
> >> Thanks for submitting this. A quick scan indicates it should work with a
> >> (recent) Debian kernel OOTB :-)
> >>
> >> On Wednesday, 3 July 2024 23:05:24 CEST Heiko Stuebner wrote:
> >>> +&sdhci {
> >>> +       bus-width = <8>;
> >>> +       no-sdio;
> >>> +       no-sd;
> >>> +       non-removable;
> >>> +       max-frequency = <200000000>;
> >>> +       mmc-hs400-1_8v;
> >>> +       mmc-hs400-enhanced-strobe;
> >>> +       mmc-hs200-1_8v;
> >>> +       status = "okay";
> >>> +};
> >>> +
> >>> +&sdmmc {
> >>> +       max-frequency = <200000000>;
> >>> +       no-sdio;
> >>> +       no-mmc;
> >>> +       bus-width = <4>;
> >>> +       cap-mmc-highspeed;
> >>> +       cap-sd-highspeed;
> >>> +       disable-wp;
> >>> +       sd-uhs-sdr104;
> >>> +       vmmc-supply = <&vcc_3v3_s3>;
> >>> +       vqmmc-supply = <&vccio_sd_s0>;
> >>> +       pinctrl-names = "default";
> >>> +       pinctrl-0 = <&sdmmc_bus4 &sdmmc_clk &sdmmc_cmd &sdmmc_det>;
> >>> +       status = "okay";
> >>> +};
> >>> +
> >>> +/* M.2 E-KEY */
> >>> +&sdio {
> >>> +       broken-cd;
> >>> +       bus-width = <4>;
> >>> +       cap-sdio-irq;
> >>> +       disable-wp;
> >>> +       keep-power-in-suspend;
> >>> +       max-frequency = <150000000>;
> >>> +       mmc-pwrseq = <&sdio_pwrseq>;
> >>> +       no-sd;
> >>> +       no-mmc;
> >>> +       non-removable;
> >>> +       pinctrl-names = "default";
> >>> +       pinctrl-0 = <&sdiom0_pins>;
> >>> +       sd-uhs-sdr104;
> >>> +       vmmc-supply = <&vcc3v3_ekey>;
> >>> +       status = "okay";
> >>> +};
> >>> +
> >>> +&sfc {
> >>> +       pinctrl-names = "default";
> >>> +       pinctrl-0 = <&fspim2_pins>;
> >>> +       status = "okay";
> >>
> >> Shouldn't those properties be sorted alphabetically? Or at least consistently?
> >> Note that the same issue is present on other places too, but I believe the
> >> above quoted part shows the issue enough.
> > 
> > The main sorting is
> > - compatible
> > - reg
> > [... alphabetically ...]
> > - status
> > 
> Yeah ... that's always the question when adding new board files. Do it like
> "it's always been done" or re-sort the properties alphanumeric _everywhere_
> which looks quite strange at times. If I'm getting the newly added dt
> coding style correctly common (subsystem?) properties should also be placed
> before vendor (driver?) specific ones. Yet I didn't see a board file which
> places 'regulator-max-microvolt' before 'regulator-min-microvolt'. So I
> guess it's fine if it's done consistently within the same file?

I always see it as a best-effort thing. If all regulator-* stuff is grouped
together it will be mostly fine. I'm not going to haggle over the sorting
of the 10th character of property names ;-) .

(and of course reading min before max, is sort of more intuitive)

And of course leaf-things (board dts) are less "important" than the core
nodes in soc devicetrees.
Alex Bee July 4, 2024, 1:04 p.m. UTC | #10
Am 04.07.24 um 14:05 schrieb Heiko Stübner:
> Am Donnerstag, 4. Juli 2024, 13:43:47 CEST schrieb Alex Bee:
>> Am 04.07.24 um 12:05 schrieb Heiko Stübner:
>>> Hi Diederik,
>>>
>>> Am Donnerstag, 4. Juli 2024, 11:38:51 CEST schrieb Diederik de Haas:
>>>> Thanks for submitting this. A quick scan indicates it should work with a
>>>> (recent) Debian kernel OOTB :-)
>>>>
>>>> On Wednesday, 3 July 2024 23:05:24 CEST Heiko Stuebner wrote:
>>>>> +&sdhci {
>>>>> +       bus-width = <8>;
>>>>> +       no-sdio;
>>>>> +       no-sd;
>>>>> +       non-removable;
>>>>> +       max-frequency = <200000000>;
>>>>> +       mmc-hs400-1_8v;
>>>>> +       mmc-hs400-enhanced-strobe;
>>>>> +       mmc-hs200-1_8v;
>>>>> +       status = "okay";
>>>>> +};
>>>>> +
>>>>> +&sdmmc {
>>>>> +       max-frequency = <200000000>;
>>>>> +       no-sdio;
>>>>> +       no-mmc;
>>>>> +       bus-width = <4>;
>>>>> +       cap-mmc-highspeed;
>>>>> +       cap-sd-highspeed;
>>>>> +       disable-wp;
>>>>> +       sd-uhs-sdr104;
>>>>> +       vmmc-supply = <&vcc_3v3_s3>;
>>>>> +       vqmmc-supply = <&vccio_sd_s0>;
>>>>> +       pinctrl-names = "default";
>>>>> +       pinctrl-0 = <&sdmmc_bus4 &sdmmc_clk &sdmmc_cmd &sdmmc_det>;
>>>>> +       status = "okay";
>>>>> +};
>>>>> +
>>>>> +/* M.2 E-KEY */
>>>>> +&sdio {
>>>>> +       broken-cd;
>>>>> +       bus-width = <4>;
>>>>> +       cap-sdio-irq;
>>>>> +       disable-wp;
>>>>> +       keep-power-in-suspend;
>>>>> +       max-frequency = <150000000>;
>>>>> +       mmc-pwrseq = <&sdio_pwrseq>;
>>>>> +       no-sd;
>>>>> +       no-mmc;
>>>>> +       non-removable;
>>>>> +       pinctrl-names = "default";
>>>>> +       pinctrl-0 = <&sdiom0_pins>;
>>>>> +       sd-uhs-sdr104;
>>>>> +       vmmc-supply = <&vcc3v3_ekey>;
>>>>> +       status = "okay";
>>>>> +};
>>>>> +
>>>>> +&sfc {
>>>>> +       pinctrl-names = "default";
>>>>> +       pinctrl-0 = <&fspim2_pins>;
>>>>> +       status = "okay";
>>>> Shouldn't those properties be sorted alphabetically? Or at least consistently?
>>>> Note that the same issue is present on other places too, but I believe the
>>>> above quoted part shows the issue enough.
>>> The main sorting is
>>> - compatible
>>> - reg
>>> [... alphabetically ...]
>>> - status
>>>
>> Yeah ... that's always the question when adding new board files. Do it like
>> "it's always been done" or re-sort the properties alphanumeric _everywhere_
>> which looks quite strange at times. If I'm getting the newly added dt
>> coding style correctly common (subsystem?) properties should also be placed
>> before vendor (driver?) specific ones. Yet I didn't see a board file which
>> places 'regulator-max-microvolt' before 'regulator-min-microvolt'. So I
>> guess it's fine if it's done consistently within the same file?
> I always see it as a best-effort thing. If all regulator-* stuff is grouped
> together it will be mostly fine. I'm not going to haggle over the sorting
> of the 10th character of property names ;-) .
>
> (and of course reading min before max, is sort of more intuitive)
>
> And of course leaf-things (board dts) are less "important" than the core
> nodes in soc devicetrees.
>
Great, thanks for sharing. Will (try) to follow in future.

Alex

>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index e8eba631da23e..0380768586436 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -132,6 +132,7 @@  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-quartzpro64.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b-pcie-ep.dtbo
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b-pcie-srns.dtbo
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5itx.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-tiger-haikou.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-toybrick-x0.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-turing-rk1.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5itx.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5itx.dts
new file mode 100644
index 0000000000000..41d92ceeeb09c
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5itx.dts
@@ -0,0 +1,1188 @@ 
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2022 Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2022 Radxa Limited
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "dt-bindings/usb/pd.h"
+#include "rk3588.dtsi"
+
+/ {
+	model = "Radxa ROCK 5 ITX";
+	compatible = "radxa,rock-5itx", "rockchip,rk3588";
+
+	aliases {
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc;
+		mmc2 = &sdio;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	adc_keys: adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+		poll-interval = <100>;
+		status = "okay";
+
+		button-maskrom {
+			label = "Mask Rom";
+			linux,code = <KEY_SETUP>;
+			press-threshold-microvolt = <1750>;
+		};
+	};
+
+	analog-sound {
+		compatible = "audio-graph-card";
+		label = "rk3588-es8316";
+
+		widgets = "Microphone", "Mic Jack",
+			  "Headphone", "Headphones";
+
+		routing = "MIC2", "Mic Jack",
+			  "Headphones", "HPOL",
+			  "Headphones", "HPOR";
+
+		dais = <&i2s0_8ch_p0>;
+		hp-det-gpio = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hp_detect>;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+
+		power-led1 {
+			gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		hdd-led2 {
+			gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "disk-activity";
+		};
+	};
+
+	fan0: pwm-fan {
+		compatible = "pwm-fan";
+		#cooling-cells = <2>;
+		cooling-levels = <0 64 128 192 255>;
+		fan-supply = <&vcc12v_dcin>;
+		pwms = <&pwm14 0 10000 0>;
+	};
+
+	/* M.2 E-KEY */
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&hym8563>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h>;
+		reset-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_LOW>;
+	};
+
+	typec_vin: regulator-typec-vin {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PB6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vbus5v0_typec_en>;
+		regulator-name = "typec_vin";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc12v_dcin: regulator-vcc12v-dcin {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc33_io64: regulator-vcc33-io64 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc33_io64";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc3v3_ekey: regulator-vcc3v3-ekey {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ekey_en>;
+		regulator-name = "vcc3v3_ekey";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <50000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc3v3_lan: vcc3v3_lan_phy2: regulator-vcc3v3-lan {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_lan";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3v3_s3>;
+	};
+
+	vcc3v3_mkey: regulator-vcc3v3-mkey {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie30x4_pwren_h>;
+		regulator-name = "vcc3v3_mkey";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <5000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc3v3_sys: regulator-vcc3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc5v0_sys: regulator-vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc5v0_usb20: vcc5v0_usb12: vcc5v0_usb34: regulator-vcc5v0-usb {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_host_pwren_h>;
+		regulator-name = "vcc5v0_usb";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v1_nldo_s3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&combphy0_ps {
+	status = "okay";
+};
+
+&combphy1_ps {
+	status = "okay";
+};
+
+&combphy2_psu {
+	status = "okay";
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b2 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_b3 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu_s0>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0m2_xfer>;
+	status = "okay";
+
+	vdd_cpu_big0_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big0_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_cpu_big1_s0: regulator@43 {
+		compatible = "rockchip,rk8603", "rockchip,rk8602";
+		reg = <0x43>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big1_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1m2_xfer>;
+	status = "okay";
+
+	vdd_npu_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_npu_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <950000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+/* CAM0 connector */
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3m0_xfer>;
+};
+
+/* M.2 E-key */
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4m1_xfer>;
+};
+
+/* RTC and LCD0 connector */
+&i2c6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c6m0_xfer>;
+	status = "okay";
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-output-names = "wifi_32kout";
+		pinctrl-names = "default";
+		pinctrl-0 = <&rtc_int>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+/* Audio codec and CAM1 connector */
+&i2c7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c7m0_xfer>;
+	status = "okay";
+
+	es8316: audio-codec@11 {
+		compatible = "everest,es8316";
+		reg = <0x11>;
+		clocks = <&cru I2S0_8CH_MCLKOUT>;
+		clock-names = "mclk";
+		assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
+		assigned-clock-rates = <12288000>;
+		#sound-dai-cells = <0>;
+
+		port {
+			es8316_p0_0: endpoint {
+				remote-endpoint = <&i2s0_8ch_p0_0>;
+			};
+		};
+	};
+};
+
+/* FUSB302 and LCD1 connector */
+&i2c8 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c8m4_xfer>;
+	status = "okay";
+
+	usbc0: usb-typec@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <RK_PB4 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usbc0_int>;
+		vbus-supply = <&typec_vin>;
+
+		usb_con: connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			data-role = "dual";
+			power-role = "dual";
+			try-power-role = "sink";
+			op-sink-microwatt = <1000000>;
+			sink-pdos =
+				<PDO_FIXED(5000, 1000, PDO_FIXED_USB_COMM)>;
+			source-pdos =
+				<PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					usbc0_orien_sw: endpoint {
+						remote-endpoint = <&usbdp_phy0_orientation_switch>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					usbc0_role_sw: endpoint {
+						remote-endpoint = <&dwc3_0_role_switch>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					dp_altmode_mux: endpoint {
+						remote-endpoint = <&usbdp_phy0_dp_altmode_mux>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&i2c8m4_xfer {
+	rockchip,pins =
+		/* i2c8_scl_m4 */
+		<3 RK_PC2 9 &pcfg_pull_up_drv_level_6>,
+		/* i2c8_sda_m4 */
+		<3 RK_PC3 9 &pcfg_pull_up_drv_level_6>;
+};
+
+&i2s0_8ch {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s0_lrck
+		     &i2s0_mclk
+		     &i2s0_sclk
+		     &i2s0_sdi0
+		     &i2s0_sdo0>;
+	status = "okay";
+
+	i2s0_8ch_p0: port {
+		i2s0_8ch_p0_0: endpoint {
+			dai-format = "i2s";
+			mclk-fs = <256>;
+			remote-endpoint = <&es8316_p0_0>;
+		};
+	};
+};
+
+&package_thermal {
+	polling-delay = <1000>;
+
+	trips {
+		package_fan0: package-fan0 {
+			hysteresis = <2000>;
+			temperature = <50000>;
+			type = "active";
+		};
+
+		package_fan1: package-fan1 {
+			hysteresis = <2000>;
+			temperature = <65000>;
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map0 {
+			cooling-device = <&fan0 THERMAL_NO_LIMIT 1>;
+			trip = <&package_fan0>;
+		};
+		map1 {
+			cooling-device = <&fan0 2 THERMAL_NO_LIMIT>;
+			trip = <&package_fan1>;
+		};
+	};
+};
+
+/* M.2 E-key */
+&pcie2x1l0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie30x1_0_perstn_m1_l>;
+	reset-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_ekey>;
+	status = "okay";
+};
+
+/* RTL8125B_1 */
+&pcie2x1l1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie30x1_1_perstn>;
+	reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_lan>;
+	status = "okay";
+};
+
+/* RTL8125B_2 */
+&pcie2x1l2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie20x1_2_perstn>;
+	reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_lan_phy2>;
+	status = "okay";
+};
+
+&pcie30phy {
+	data-lanes = <1 1 2 2>;
+	/* separate clock lines from the clock generator to phy and devices */
+	rockchip,rx-common-refclk-mode = <0 0 0 0>;
+	status = "okay";
+};
+
+/* ASMedia ASM1164 Sata controller */
+&pcie3x2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie30x2_perstn_m1_l>;
+	reset-gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc33_io64>;
+	status = "okay";
+};
+
+/* M.2 M.key */
+&pcie3x4 {
+	num-lanes = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie30x4_perstn_m1_l>;
+	reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_mkey>;
+	status = "okay";
+};
+
+&pwm14 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm14m1_pins>;
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&avcc_1v8_s0>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	no-sdio;
+	no-sd;
+	non-removable;
+	max-frequency = <200000000>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	mmc-hs200-1_8v;
+	status = "okay";
+};
+
+&sdmmc {
+	max-frequency = <200000000>;
+	no-sdio;
+	no-mmc;
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_3v3_s3>;
+	vqmmc-supply = <&vccio_sd_s0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_bus4 &sdmmc_clk &sdmmc_cmd &sdmmc_det>;
+	status = "okay";
+};
+
+/* M.2 E-KEY */
+&sdio {
+	broken-cd;
+	bus-width = <4>;
+	cap-sdio-irq;
+	disable-wp;
+	keep-power-in-suspend;
+	max-frequency = <150000000>;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	no-sd;
+	no-mmc;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdiom0_pins>;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc3v3_ekey>;
+	status = "okay";
+};
+
+&sfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&fspim2_pins>;
+	status = "okay";
+
+	spi_flash: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
+	};
+};
+
+&spi2 {
+	status = "okay";
+	assigned-clocks = <&cru CLK_SPI2>;
+	assigned-clock-rates = <200000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
+	num-cs = <1>;
+
+	pmic@0 {
+		compatible = "rockchip,rk806";
+		spi-max-frequency = <1000000>;
+		reg = <0x0>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
+			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
+
+		system-power-controller;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc5v0_sys>;
+		vcc6-supply = <&vcc5v0_sys>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc5v0_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+		vcc10-supply = <&vcc5v0_sys>;
+		vcc11-supply = <&vcc_2v0_pldo_s3>;
+		vcc12-supply = <&vcc5v0_sys>;
+		vcc13-supply = <&vcc_1v1_nldo_s3>;
+		vcc14-supply = <&vcc_1v1_nldo_s3>;
+		vcca-supply = <&vcc5v0_sys>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		rk806_dvs1_null: dvs1-null-pins {
+			pins = "gpio_pwrctrl1";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs2_null: dvs2-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs3_null: dvs3-null-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun0";
+		};
+
+		regulators {
+			vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_gpu_s0";
+				regulator-enable-ramp-delay = <400>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_cpu_lit_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_log_s0: dcdc-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <750000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_log_s0";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_vdenc_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_ddr_s0: dcdc-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <900000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_ddr_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			vdd2_ddr_s3: dcdc-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vdd2_ddr_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_2v0_pldo_s3: dcdc-reg7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_2v0_pldo_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <2000000>;
+				};
+			};
+
+			vcc_3v3_s3: dcdc-reg8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_3v3_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vddq_ddr_s0: dcdc-reg9 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vddq_ddr_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s3: dcdc-reg10 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_1v8_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avcc_1v8_s0: pldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "avcc_1v8_s0";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_1v8_s0: pldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_1v8_s0";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avdd_1v2_s0: pldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-name = "avdd_1v2_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3_s0: pldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vcc_3v3_s0";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vccio_sd_s0: pldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vccio_sd_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			pldo6_s3: pldo-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "pldo6_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_0v75_s3: nldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "vdd_0v75_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_ddr_pll_s0: nldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-name = "vdd_ddr_pll_s0";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			avdd_0v75_s0: nldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "avdd_0v75_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v85_s0: nldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-name = "vdd_0v85_s0";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <837500>;
+				};
+			};
+
+			vdd_0v75_s0: nldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "vdd_0v75_s0";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+		};
+	};
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-0 = <&uart2m0_xfer>;
+	status = "okay";
+};
+
+/* Connected to M.2 E-key */
+&uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart6m1_xfer &uart6m1_ctsn &uart6m1_rtsn>;
+	status = "okay";
+};
+
+&u2phy0 {
+	status = "okay";
+};
+
+&u2phy0_otg {
+	status = "okay";
+};
+
+&u2phy1 {
+	status = "okay";
+};
+
+&u2phy1_otg {
+	/* connected to USB3 hub, which is powered by vcc5v0_usb12 */
+	phy-supply = <&vcc5v0_usb12>;
+	status = "okay";
+};
+
+&u2phy2 {
+	status = "okay";
+};
+
+&u2phy2_host {
+	/* connected to USB2 hub, which is powered by vcc5v0_usb20 */
+	phy-supply = <&vcc5v0_usb20>;
+	status = "okay";
+};
+
+&u2phy3 {
+	status = "okay";
+};
+
+&u2phy3_host {
+	phy-supply = <&vcc5v0_usb20>;
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usb_host0_xhci {
+	usb-role-switch;
+	status = "okay";
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		dwc3_0_role_switch: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&usbc0_role_sw>;
+		};
+	};
+};
+
+&usb_host1_xhci {
+	dr_mode = "host";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	/* 2.0 hub on port 1 */
+	hub_2_0: hub@1 {
+		compatible = "usb5e3,610";
+		reg = <1>;
+		peer-hub = <&hub_3_0>;
+		vdd-supply = <&vcc5v0_usb12>;
+	};
+
+	/* 3.0 hub on port 4 */
+	hub_3_0: hub@2 {
+		compatible = "usb5e3,620";
+		reg = <2>;
+		peer-hub = <&hub_2_0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&gl3523_reset>;
+		reset-gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&vcc5v0_usb12>;
+	};
+};
+
+&usbdp_phy0 {
+	mode-switch;
+	orientation-switch;
+	sbu1-dc-gpios = <&gpio4 RK_PB7 GPIO_ACTIVE_HIGH>;
+	sbu2-dc-gpios = <&gpio4 RK_PC0 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		usbdp_phy0_orientation_switch: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&usbc0_orien_sw>;
+		};
+
+		usbdp_phy0_dp_altmode_mux: endpoint@1 {
+			reg = <1>;
+			remote-endpoint = <&dp_altmode_mux>;
+		};
+	};
+};
+
+&usbdp_phy1 {
+	rockchip,dp-lane-mux = <2 3>;
+	status = "okay";
+};
+
+&pinctrl {
+	hym8563 {
+		rtc_int: rtc-int {
+			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	leds {
+		led_pins: led-pins {
+			rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>,
+					<0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pcie {
+		pcie20x1_2_perstn: pcie20x1-2-perstn {
+			rockchip,pins = <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pcie30x1_0_perstn_m1_l: pcie30x1-0-perstn-m1-l {
+			rockchip,pins = <4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pcie30x1_1_perstn: pcie30x1-1-perstn {
+			rockchip,pins = <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pcie30x2_perstn_m1_l: pcie30x2-perstn-m1-l {
+			rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pcie30x4_perstn_m1_l: pcie30x4-perstn-m1-l {
+			rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		ekey_en: ekey-en {
+			rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		pcie30x4_pwren_h: pcie30x4-pwren-h {
+			rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	sound {
+		hp_detect: hp-detect {
+			rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	usb {
+		usb_host_pwren_h: usb-host-pwren-h {
+			rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		vcc5v0_otg_en: vcc5v0-otg-en {
+			rockchip,pins = <2 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		gl3523_reset: rl3523-reset {
+			rockchip,pins = <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb-typec {
+		usbc0_int: usbc0-int {
+			rockchip,pins = <3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		vbus5v0_typec_en: vbus5v0-typec-en {
+			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	hdmirx {
+		hdmirx_det: hdmirx-det {
+			rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	wireless-wlan {
+		wifi_host_wake_irq: wifi-host-wake-irq {
+			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	bt {
+		bt_enable_h: bt-enable-h {
+			rockchip,pins = <2 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_host_wake_l: bt-host-wake-l {
+			rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_wake_l: bt-wake-l {
+			rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	dp {
+		dp1_hpd: dp1-hpd {
+			rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};