mbox series

[0/6] media: qcom: camss: Add sc7280 support

Message ID 20240629-camss_first_post_linux_next-v1-0-bc798edabc3a@quicinc.com (mailing list archive)
Headers show
Series media: qcom: camss: Add sc7280 support | expand

Message

Vikram Sharma June 28, 2024, 6:32 p.m. UTC 
SC7280 is a Qualcomm SoC. This series adds support to
bring up the CSIPHY, CSID, VFE/RDI interfaces in SC7280.

SC7280 provides

- 3 x VFE, 3 RDI per VFE
- 2 x VFE Lite, 4 RDI per VFE
- 3 x CSID
- 2 x CSID Lite
- 5 x CSI PHY

This series is rebased based on：
https://lore.kernel.org/linux-arm-msm/20240522154659.510-1-quic_grosikop@quicinc.com/

The changes are verified on SC7280 qcs6490-rb3gen2 board, the base dts for qcs6490-rb3gen2
is:
https://lore.kernel.org/all/20231103184655.23555-1-quic_kbajaj@quicinc.com/

Suresh Vankadara (2):
media: qcom: camss: support for camss driver on sc7280
arm64: dts: qcom: sc7280: Add support for camss

Trishansh Bhardwaj (2):
media: qcom: camss: support for camss driver on sc7280
arm64: dts: qcom: sc7280: Add support for camss

Vikram Sharma (1):
media: dt-bindings: media: camss: Add qcom,sc7280-camss binding

Hariram Purshotam (3):
i2c: Enable IMX577 camera sensor for qcm6490
arm64: dts: qcom: qcs6490-rb3gen2: Enable IMX577 camera sensor
arm64: dts: qcom: sc7280: Add IMX577 camera sensor

Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
---
Suresh Vankadara (1):
      media: qcom: camss: support for camss driver for sc7280

Vikram Sharma (5):
      media: dt-bindings: media: camss: Add qcom,sc7280-camss binding
      arm64: dts: qcom: sc7280: Add support for camss
      arm64: dts: qcom: sc7280: Add IMX577 camera sensor
      arm64: dts: qcom: qcs6490-rb3gen2: Enable IMX577 camera sensor
      i2c: Enable IMX577 camera sensor for qcm6490

 .../bindings/media/qcom,sc7280-camss.yaml          | 477 +++++++++++++++++++++
 arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts       |  67 +++
 arch/arm64/boot/dts/qcom/sc7280.dtsi               | 215 ++++++++++
 drivers/i2c/busses/i2c-qcom-cci.c                  |   1 +
 drivers/media/platform/qcom/camss/camss-csid.c     |  16 +-
 .../platform/qcom/camss/camss-csiphy-3ph-1-0.c     |   2 +
 drivers/media/platform/qcom/camss/camss-vfe.c      |   2 +
 drivers/media/platform/qcom/camss/camss.c          | 340 +++++++++++++++
 drivers/media/platform/qcom/camss/camss.h          |   2 +
 9 files changed, 1119 insertions(+), 3 deletions(-)
---
base-commit: 18eeb2d92baca167809cd5d48eb60e0a5c036d51
change-id: 20240627-camss_first_post_linux_next-f4163c90093c

Best regards,

Comments

Luca Weiss July 4, 2024, 3:01 p.m. UTC | #1 
On Fri Jun 28, 2024 at 8:32 PM CEST, Vikram Sharma wrote:
> SC7280 is a Qualcomm SoC. This series adds support to
> bring up the CSIPHY, CSID, VFE/RDI interfaces in SC7280.
>
> SC7280 provides
>
> - 3 x VFE, 3 RDI per VFE
> - 2 x VFE Lite, 4 RDI per VFE
> - 3 x CSID
> - 2 x CSID Lite
> - 5 x CSI PHY
>
> This series is rebased based on：
> https://lore.kernel.org/linux-arm-msm/20240522154659.510-1-quic_grosikop@quicinc.com/
>
> The changes are verified on SC7280 qcs6490-rb3gen2 board, the base dts for qcs6490-rb3gen2
> is:
> https://lore.kernel.org/all/20231103184655.23555-1-quic_kbajaj@quicinc.com/

Hi Vikram,

Thanks for sending this patch!

I just tried this on QCM6490 Fairphone 5 smartphone but unfortunately
during probe something is not quite right.

[   99.531855] qcom-camss acaf000.camss: Adding to iommu group 11
[   99.533180] ------------[ cut here ]------------
[   99.533187] qcom-camss acaf000.camss: Error: CSID depends on VFE/IFE device ops!
[   99.533219] WARNING: CPU: 2 PID: 6902 at drivers/media/platform/qcom/camss/camss-csid.c:1024 msm_csid_subdev_init+0x41c/0x460 [qcom_camss]
[   99.533248] Modules linked in: qcom_camss(+) videobuf2_dma_sg videobuf2_memops videobuf2_v4l2 videobuf2_common
[   99.533266] CPU: 2 PID: 6902 Comm: modprobe Not tainted 6.10.0-rc5-00087-g1dd25cd60c69 #138
[   99.533272] Hardware name: Fairphone 5 (DT)
[   99.533276] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[   99.533281] pc : msm_csid_subdev_init+0x41c/0x460 [qcom_camss]
[   99.533301] lr : msm_csid_subdev_init+0x41c/0x460 [qcom_camss]
[   99.533321] sp : ffff80008575b760
[   99.533324] x29: ffff80008575b760 x28: ffffae85fd7685d8 x27: ffff80008575bca8
[   99.533334] x26: 0000000000002c28 x25: 0000000000000000 x24: ffff307e4c48a080
[   99.533343] x23: ffff307e46876080 x22: 0000000000000000 x21: ffff307e40bdac10
[   99.533352] x20: ffff307e46876080 x19: 0000000000000000 x18: fffffffffffed520
[   99.533361] x17: 2065636976656420 x16: 4546492f45465620 x15: 6e6f2073646e6570
[   99.533369] x14: ffffae865b46dad0 x13: 2173706f20656369 x12: 766564204546492f
[   99.533377] x11: ffffae865b46dad0 x10: 00000000000002d3 x9 : ffffae865b4c5ad0
[   99.533386] x8 : 0000000000017fe8 x7 : 00000000fffff000 x6 : ffffae865b4c5ad0
[   99.533394] x5 : ffff307fb6f83848 x4 : 0000000000000000 x3 : ffff81f95bd4d000
[   99.533402] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff307e4dfe9000
[   99.533412] Call trace:
[   99.533415]  msm_csid_subdev_init+0x41c/0x460 [qcom_camss]
[   99.533435]  camss_probe+0x310/0x998 [qcom_camss]
[   99.533454]  platform_probe+0x68/0xe0
[   99.533465]  really_probe+0xbc/0x2c0
[   99.533471]  __driver_probe_device+0x78/0x120
[   99.533479]  driver_probe_device+0x3c/0x160
[   99.533485]  __driver_attach+0x90/0x1a0
[   99.533490]  bus_for_each_dev+0x7c/0xf0
[   99.533497]  driver_attach+0x24/0x30
[   99.533503]  bus_add_driver+0xe4/0x208
[   99.533509]  driver_register+0x68/0x124
[   99.533514]  __platform_driver_register+0x28/0x40
[   99.533521]  qcom_camss_driver_init+0x20/0x1000 [qcom_camss]
[   99.533540]  do_one_initcall+0x60/0x1d4
[   99.533547]  do_init_module+0x5c/0x21c
[   99.533555]  load_module+0x18b0/0x1e40
[   99.533562]  init_module_from_file+0x88/0xcc
[   99.533568]  __arm64_sys_finit_module+0x174/0x340
[   99.533575]  invoke_syscall+0x48/0x10c
[   99.533582]  el0_svc_common.constprop.0+0x40/0xe0
[   99.533588]  do_el0_svc+0x1c/0x34
[   99.533594]  el0_svc+0x34/0xe0
[   99.533602]  el0t_64_sync_handler+0x120/0x12c
[   99.533608]  el0t_64_sync+0x190/0x194
[   99.533613] ---[ end trace 0000000000000000 ]---
[   99.533619] qcom-camss acaf000.camss: Failed to init csid0 sub-device: -22
[   99.533828] qcom-camss acaf000.camss: probe with driver qcom-camss failed with error -22

My tree is based on 6.10-rc5 plus v4 of:
https://lore.kernel.org/linux-arm-msm/20240522154659.510-1-quic_grosikop@quicinc.com/
plus your v1 series.

And then some extra patches for my device but nothing touching camss
driver.

Am I missing something?

Regards
Luca

>
> Suresh Vankadara (2):
> media: qcom: camss: support for camss driver on sc7280
> arm64: dts: qcom: sc7280: Add support for camss
>
> Trishansh Bhardwaj (2):
> media: qcom: camss: support for camss driver on sc7280
> arm64: dts: qcom: sc7280: Add support for camss
>
> Vikram Sharma (1):
> media: dt-bindings: media: camss: Add qcom,sc7280-camss binding
>
> Hariram Purshotam (3):
> i2c: Enable IMX577 camera sensor for qcm6490
> arm64: dts: qcom: qcs6490-rb3gen2: Enable IMX577 camera sensor
> arm64: dts: qcom: sc7280: Add IMX577 camera sensor
>
> Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
> ---
> Suresh Vankadara (1):
>       media: qcom: camss: support for camss driver for sc7280
>
> Vikram Sharma (5):
>       media: dt-bindings: media: camss: Add qcom,sc7280-camss binding
>       arm64: dts: qcom: sc7280: Add support for camss
>       arm64: dts: qcom: sc7280: Add IMX577 camera sensor
>       arm64: dts: qcom: qcs6490-rb3gen2: Enable IMX577 camera sensor
>       i2c: Enable IMX577 camera sensor for qcm6490
>
>  .../bindings/media/qcom,sc7280-camss.yaml          | 477 +++++++++++++++++++++
>  arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts       |  67 +++
>  arch/arm64/boot/dts/qcom/sc7280.dtsi               | 215 ++++++++++
>  drivers/i2c/busses/i2c-qcom-cci.c                  |   1 +
>  drivers/media/platform/qcom/camss/camss-csid.c     |  16 +-
>  .../platform/qcom/camss/camss-csiphy-3ph-1-0.c     |   2 +
>  drivers/media/platform/qcom/camss/camss-vfe.c      |   2 +
>  drivers/media/platform/qcom/camss/camss.c          | 340 +++++++++++++++
>  drivers/media/platform/qcom/camss/camss.h          |   2 +
>  9 files changed, 1119 insertions(+), 3 deletions(-)
> ---
> base-commit: 18eeb2d92baca167809cd5d48eb60e0a5c036d51
> change-id: 20240627-camss_first_post_linux_next-f4163c90093c
>
> Best regards,