| Message ID | 20240705134647.3524969-4-ciprianmarian.costea@oss.nxp.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | address several S32G2/S32G3 SoC based boards particularities | expand |
> -----Original Message----- > From: Ciprian Marian Costea (OSS) <ciprianmarian.costea@oss.nxp.com> > Sent: 2024年7月5日 21:47 > To: Bough Chen <haibo.chen@nxp.com>; Adrian Hunter > <adrian.hunter@intel.com>; Ulf Hansson <ulf.hansson@linaro.org>; Shawn Guo > <shawnguo@kernel.org>; Sascha Hauer <s.hauer@pengutronix.de>; > Pengutronix Kernel Team <kernel@pengutronix.de>; Fabio Estevam > <festevam@gmail.com> > Cc: linux-kernel@vger.kernel.org; linux-mmc@vger.kernel.org; > imx@lists.linux.dev; linux-arm-kernel@lists.infradead.org; dl-S32 > <S32@nxp.com>; Ciprian Marian Costea (OSS) > <ciprianmarian.costea@oss.nxp.com> > Subject: [PATCH 3/4] mmc: sdhci-esdhc-imx: add option to not change pinctrl > state in suspend > > On some boards such as S32G based, changing the pinctrl state in suspend > routine may not be supported. If so, why not dop the "sleep" pinctrl in device tree file? Best Regards Haibo Chen > > For this scenario the newly introduced flag 'ESDHC_FLAG_SKIP_PINCTRL_SLEEP' > is used. > > Signed-off-by: Ciprian Costea <ciprianmarian.costea@oss.nxp.com> > --- > drivers/mmc/host/sdhci-esdhc-imx.c | 14 ++++++++++---- > 1 file changed, 10 insertions(+), 4 deletions(-) > > diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c > b/drivers/mmc/host/sdhci-esdhc-imx.c > index 8f0bc6dca2b0..c3ff7fccd051 100644 > --- a/drivers/mmc/host/sdhci-esdhc-imx.c > +++ b/drivers/mmc/host/sdhci-esdhc-imx.c > @@ -204,6 +204,9 @@ > /* The IP does not have GPIO CD wake capabilities */ > #define ESDHC_FLAG_SKIP_CD_WAKE BIT(18) > > +/* The IP does not support transition to pinctrl sleep state */ #define > +ESDHC_FLAG_SKIP_PINCTRL_SLEEP BIT(19) > + > enum wp_types { > ESDHC_WP_NONE, /* no WP, neither controller nor gpio */ > ESDHC_WP_CONTROLLER, /* mmc controller internal WP */ > @@ -301,7 +304,8 @@ static struct esdhc_soc_data usdhc_s32g2_data = { > .flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_MAN_TUNING > | ESDHC_FLAG_HAVE_CAP1 | ESDHC_FLAG_HS200 > | ESDHC_FLAG_HS400 | ESDHC_FLAG_HS400_ES > - | ESDHC_FLAG_SKIP_ERR004536 | > ESDHC_FLAG_SKIP_CD_WAKE, > + | ESDHC_FLAG_SKIP_ERR004536 | > ESDHC_FLAG_SKIP_CD_WAKE > + | ESDHC_FLAG_SKIP_PINCTRL_SLEEP, > }; > > static struct esdhc_soc_data usdhc_imx7ulp_data = { @@ -1884,9 +1888,11 > @@ static int sdhci_esdhc_suspend(struct device *dev) > if (ret) > return ret; > > - ret = pinctrl_pm_select_sleep_state(dev); > - if (ret) > - return ret; > + if (!(imx_data->socdata->flags & ESDHC_FLAG_SKIP_PINCTRL_SLEEP)) { > + ret = pinctrl_pm_select_sleep_state(dev); > + if (ret) > + return ret; > + } > > ret = mmc_gpio_set_cd_wake(host->mmc, true); > > -- > 2.45.2
On 7/8/2024 5:33 AM, Bough Chen wrote: >> -----Original Message----- >> From: Ciprian Marian Costea (OSS) <ciprianmarian.costea@oss.nxp.com> >> Sent: 2024年7月5日 21:47 >> To: Bough Chen <haibo.chen@nxp.com>; Adrian Hunter >> <adrian.hunter@intel.com>; Ulf Hansson <ulf.hansson@linaro.org>; Shawn Guo >> <shawnguo@kernel.org>; Sascha Hauer <s.hauer@pengutronix.de>; >> Pengutronix Kernel Team <kernel@pengutronix.de>; Fabio Estevam >> <festevam@gmail.com> >> Cc: linux-kernel@vger.kernel.org; linux-mmc@vger.kernel.org; >> imx@lists.linux.dev; linux-arm-kernel@lists.infradead.org; dl-S32 >> <S32@nxp.com>; Ciprian Marian Costea (OSS) >> <ciprianmarian.costea@oss.nxp.com> >> Subject: [PATCH 3/4] mmc: sdhci-esdhc-imx: add option to not change pinctrl >> state in suspend >> >> On some boards such as S32G based, changing the pinctrl state in suspend >> routine may not be supported. > > If so, why not dop the "sleep" pinctrl in device tree file? > > Best Regards > Haibo Chen Thanks for this suggestion. I verified and pinctrl node is not yet upstream'ed for S32G2/S32G3 SoC. Indeed, 'pinctrl_pm_select_sleep_state' would not report any errors in case 'sleep' pinctrl is not defined in the device tree file. I will drop this commit in version 2 of this patchset. Best Regards, Ciprian >> >> For this scenario the newly introduced flag 'ESDHC_FLAG_SKIP_PINCTRL_SLEEP' >> is used. >> >> Signed-off-by: Ciprian Costea <ciprianmarian.costea@oss.nxp.com> >> --- >> drivers/mmc/host/sdhci-esdhc-imx.c | 14 ++++++++++---- >> 1 file changed, 10 insertions(+), 4 deletions(-) >> >> diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c >> b/drivers/mmc/host/sdhci-esdhc-imx.c >> index 8f0bc6dca2b0..c3ff7fccd051 100644 >> --- a/drivers/mmc/host/sdhci-esdhc-imx.c >> +++ b/drivers/mmc/host/sdhci-esdhc-imx.c >> @@ -204,6 +204,9 @@ >> /* The IP does not have GPIO CD wake capabilities */ >> #define ESDHC_FLAG_SKIP_CD_WAKE BIT(18) >> >> +/* The IP does not support transition to pinctrl sleep state */ #define >> +ESDHC_FLAG_SKIP_PINCTRL_SLEEP BIT(19) >> + >> enum wp_types { >> ESDHC_WP_NONE, /* no WP, neither controller nor gpio */ >> ESDHC_WP_CONTROLLER, /* mmc controller internal WP */ >> @@ -301,7 +304,8 @@ static struct esdhc_soc_data usdhc_s32g2_data = { >> .flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_MAN_TUNING >> | ESDHC_FLAG_HAVE_CAP1 | ESDHC_FLAG_HS200 >> | ESDHC_FLAG_HS400 | ESDHC_FLAG_HS400_ES >> - | ESDHC_FLAG_SKIP_ERR004536 | >> ESDHC_FLAG_SKIP_CD_WAKE, >> + | ESDHC_FLAG_SKIP_ERR004536 | >> ESDHC_FLAG_SKIP_CD_WAKE >> + | ESDHC_FLAG_SKIP_PINCTRL_SLEEP, >> }; >> >> static struct esdhc_soc_data usdhc_imx7ulp_data = { @@ -1884,9 +1888,11 >> @@ static int sdhci_esdhc_suspend(struct device *dev) >> if (ret) >> return ret; >> >> - ret = pinctrl_pm_select_sleep_state(dev); >> - if (ret) >> - return ret; >> + if (!(imx_data->socdata->flags & ESDHC_FLAG_SKIP_PINCTRL_SLEEP)) { >> + ret = pinctrl_pm_select_sleep_state(dev); >> + if (ret) >> + return ret; >> + } >> >> ret = mmc_gpio_set_cd_wake(host->mmc, true); >> >> -- >> 2.45.2 >
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index 8f0bc6dca2b0..c3ff7fccd051 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -204,6 +204,9 @@ /* The IP does not have GPIO CD wake capabilities */ #define ESDHC_FLAG_SKIP_CD_WAKE BIT(18) +/* The IP does not support transition to pinctrl sleep state */ +#define ESDHC_FLAG_SKIP_PINCTRL_SLEEP BIT(19) + enum wp_types { ESDHC_WP_NONE, /* no WP, neither controller nor gpio */ ESDHC_WP_CONTROLLER, /* mmc controller internal WP */ @@ -301,7 +304,8 @@ static struct esdhc_soc_data usdhc_s32g2_data = { .flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_MAN_TUNING | ESDHC_FLAG_HAVE_CAP1 | ESDHC_FLAG_HS200 | ESDHC_FLAG_HS400 | ESDHC_FLAG_HS400_ES - | ESDHC_FLAG_SKIP_ERR004536 | ESDHC_FLAG_SKIP_CD_WAKE, + | ESDHC_FLAG_SKIP_ERR004536 | ESDHC_FLAG_SKIP_CD_WAKE + | ESDHC_FLAG_SKIP_PINCTRL_SLEEP, }; static struct esdhc_soc_data usdhc_imx7ulp_data = { @@ -1884,9 +1888,11 @@ static int sdhci_esdhc_suspend(struct device *dev) if (ret) return ret; - ret = pinctrl_pm_select_sleep_state(dev); - if (ret) - return ret; + if (!(imx_data->socdata->flags & ESDHC_FLAG_SKIP_PINCTRL_SLEEP)) { + ret = pinctrl_pm_select_sleep_state(dev); + if (ret) + return ret; + } ret = mmc_gpio_set_cd_wake(host->mmc, true);
On some boards such as S32G based, changing the pinctrl state in suspend routine may not be supported. For this scenario the newly introduced flag 'ESDHC_FLAG_SKIP_PINCTRL_SLEEP' is used. Signed-off-by: Ciprian Costea <ciprianmarian.costea@oss.nxp.com> --- drivers/mmc/host/sdhci-esdhc-imx.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-)