@@ -40,6 +40,7 @@ config HP_WMI
depends on ACPI_WMI
depends on INPUT
depends on RFKILL || RFKILL = n
+ select POWER_SUPPLY
select INPUT_SPARSEKMAP
select ACPI_PLATFORM_PROFILE
select HWMON
@@ -24,6 +24,9 @@
#include <linux/platform_profile.h>
#include <linux/hwmon.h>
#include <linux/acpi.h>
+#include <linux/mutex.h>
+#include <linux/cleanup.h>
+#include <linux/power_supply.h>
#include <linux/rfkill.h>
#include <linux/string.h>
#include <linux/dmi.h>
@@ -42,6 +45,8 @@ MODULE_ALIAS("wmi:5FB7F034-2C63-45E9-BE91-3D44E2C707E4");
#define HP_OMEN_EC_THERMAL_PROFILE_TIMER_OFFSET 0x63
#define HP_OMEN_EC_THERMAL_PROFILE_OFFSET 0x95
+#define ACPI_AC_CLASS "ac_adapter"
+
#define zero_if_sup(tmp) (zero_insize_support?0:sizeof(tmp)) // use when zero insize is required
/* DMI board names of devices that should use the omen specific path for
@@ -259,10 +264,18 @@ static const struct key_entry hp_wmi_keymap[] = {
{ KE_END, 0 }
};
+/*
+ * Mutex for the active_platform_profile variable,
+ * see omen_powersource_event.
+ */
+DEFINE_MUTEX(active_platform_profile_lock);
+
static struct input_dev *hp_wmi_input_dev;
static struct input_dev *camera_shutter_input_dev;
static struct platform_device *hp_wmi_platform_dev;
static struct platform_profile_handler platform_profile_handler;
+static struct notifier_block platform_power_source_nb;
+static enum platform_profile_option active_platform_profile;
static bool platform_profile_support;
static bool zero_insize_support;
@@ -1194,8 +1207,7 @@ static int __init hp_wmi_rfkill2_setup(struct platform_device *device)
return err;
}
-static int platform_profile_omen_get(struct platform_profile_handler *pprof,
- enum platform_profile_option *profile)
+static int platform_profile_omen_get_ec(enum platform_profile_option *profile)
{
int tp;
@@ -1223,6 +1235,29 @@ static int platform_profile_omen_get(struct platform_profile_handler *pprof,
return 0;
}
+static int platform_profile_omen_get(struct platform_profile_handler *pprof,
+ enum platform_profile_option *profile)
+{
+ enum platform_profile_option selected_platform_profile;
+
+ /*
+ * We directly return the stored platform profile, as the embedded
+ * controller will not accept switching to the performance option when
+ * the conditions are not met (e.g. the laptop is not plugged in).
+ *
+ * If we directly return what the EC reports, the platform profile will
+ * immediately "switch back" to normal mode, which is against the
+ * expected behaviour from a userspace point of view, as described in
+ * the Platform Profile Section page of the kernel documentation.
+ *
+ * See also omen_powersource_event.
+ */
+ guard(mutex)(&active_platform_profile_lock);
+ selected_platform_profile = active_platform_profile;
+
+ return selected_platform_profile;
+}
+
static bool has_omen_thermal_profile_ec_timer(void)
{
const char *board_name = dmi_get_system_info(DMI_BOARD_NAME);
@@ -1245,8 +1280,7 @@ inline int omen_thermal_profile_ec_timer_set(u8 value)
return ec_write(HP_OMEN_EC_THERMAL_PROFILE_TIMER_OFFSET, value);
}
-static int platform_profile_omen_set(struct platform_profile_handler *pprof,
- enum platform_profile_option profile)
+static int platform_profile_omen_set_ec(enum platform_profile_option profile)
{
int err, tp, tp_version;
enum hp_thermal_profile_omen_flags flags = 0;
@@ -1300,6 +1334,22 @@ static int platform_profile_omen_set(struct platform_profile_handler *pprof,
return 0;
}
+static int platform_profile_omen_set(struct platform_profile_handler *pprof,
+ enum platform_profile_option profile)
+{
+ int err;
+
+ guard(mutex)(&active_platform_profile_lock);
+
+ err = platform_profile_omen_set_ec(profile);
+ if (err < 0)
+ return err;
+
+ active_platform_profile = profile;
+
+ return 0;
+}
+
static int thermal_profile_get(void)
{
return hp_wmi_read_int(HPWMI_THERMAL_PROFILE_QUERY);
@@ -1381,8 +1431,7 @@ static bool is_victus_thermal_profile(void)
board_name) >= 0;
}
-static int platform_profile_victus_get(struct platform_profile_handler *pprof,
- enum platform_profile_option *profile)
+static int platform_profile_victus_get_ec(enum platform_profile_option *profile)
{
int tp;
@@ -1407,8 +1456,14 @@ static int platform_profile_victus_get(struct platform_profile_handler *pprof,
return 0;
}
-static int platform_profile_victus_set(struct platform_profile_handler *pprof,
- enum platform_profile_option profile)
+static int platform_profile_victus_get(struct platform_profile_handler *pprof,
+ enum platform_profile_option *profile)
+{
+ /* Same behaviour as platform_profile_omen_get */
+ return platform_profile_omen_get(pprof, profile);
+}
+
+static int platform_profile_victus_set_ec(enum platform_profile_option profile)
{
int err, tp;
@@ -1433,21 +1488,113 @@ static int platform_profile_victus_set(struct platform_profile_handler *pprof,
return 0;
}
+static int platform_profile_victus_set(struct platform_profile_handler *pprof,
+ enum platform_profile_option profile)
+{
+ int err;
+
+ guard(mutex)(&active_platform_profile_lock);
+
+ err = platform_profile_victus_set_ec(profile);
+ if (err < 0)
+ return err;
+
+ active_platform_profile = profile;
+
+ return 0;
+}
+
+static int omen_powersource_event(struct notifier_block *nb,
+ unsigned long value,
+ void *data)
+{
+ struct acpi_bus_event *event_entry = data;
+ enum platform_profile_option actual_profile;
+ int err;
+
+ if (strcmp(event_entry->device_class, ACPI_AC_CLASS) != 0)
+ return NOTIFY_DONE;
+
+ pr_debug("Received power source device event\n");
+
+ guard(mutex)(&active_platform_profile_lock);
+
+ /*
+ * This handler can only be called on Omen and Victus models, so
+ * there's no need to call is_victus_thermal_profile() here.
+ */
+ if (is_omen_thermal_profile())
+ err = platform_profile_omen_get_ec(&actual_profile);
+ else
+ err = platform_profile_victus_get_ec(&actual_profile);
+
+ if (err < 0) {
+ /*
+ * Although we failed to get the current platform profile, we
+ * still want the other event consumers to process it.
+ */
+ pr_warn("Failed to read current platform profile (%d)\n", err);
+ return NOTIFY_DONE;
+ }
+
+ /*
+ * If we're back on AC and that the user-chosen power profile is
+ * different from what the EC reports, we restore the user-chosen
+ * one.
+ */
+ if (power_supply_is_system_supplied() <= 0 ||
+ active_platform_profile == actual_profile) {
+ pr_debug("Platform profile update skipped, conditions unmet\n");
+ return NOTIFY_DONE;
+ }
+
+ if (is_omen_thermal_profile())
+ err = platform_profile_omen_set_ec(active_platform_profile);
+ else
+ err = platform_profile_victus_set_ec(active_platform_profile);
+
+ if (err < 0) {
+ pr_warn("Failed to restore platform profile (%d)\n", err);
+ return NOTIFY_DONE;
+ }
+
+ return NOTIFY_OK;
+}
+
+static int omen_register_powersource_event_handler(void)
+{
+ int err;
+
+ platform_power_source_nb.notifier_call = omen_powersource_event;
+ err = register_acpi_notifier(&platform_power_source_nb);
+
+ if (err < 0) {
+ pr_warn("Failed to install ACPI power source notify handler\n");
+ return err;
+ }
+
+ return 0;
+}
+
+static inline void omen_unregister_powersource_event_handler(void)
+{
+ unregister_acpi_notifier(&platform_power_source_nb);
+}
+
static int thermal_profile_setup(void)
{
int err, tp;
if (is_omen_thermal_profile()) {
- tp = omen_thermal_profile_get();
- if (tp < 0)
- return tp;
+ err = platform_profile_omen_get_ec(&active_platform_profile);
+ if (err < 0)
+ return err;
/*
* call thermal profile write command to ensure that the
* firmware correctly sets the OEM variables
*/
-
- err = omen_thermal_profile_set(tp);
+ err = platform_profile_omen_set_ec(active_platform_profile);
if (err < 0)
return err;
@@ -1456,15 +1603,15 @@ static int thermal_profile_setup(void)
set_bit(PLATFORM_PROFILE_COOL, platform_profile_handler.choices);
} else if (is_victus_thermal_profile()) {
- tp = omen_thermal_profile_get();
- if (tp < 0)
- return tp;
+ err = platform_profile_victus_get_ec(&active_platform_profile);
+ if (err < 0)
+ return err;
/*
* call thermal profile write command to ensure that the
* firmware correctly sets the OEM variables
*/
- err = omen_thermal_profile_set(tp);
+ err = platform_profile_victus_set_ec(active_platform_profile);
if (err < 0)
return err;
@@ -1758,6 +1905,12 @@ static int __init hp_wmi_init(void)
goto err_unregister_device;
}
+ if (is_omen_thermal_profile() || is_victus_thermal_profile()) {
+ err = omen_register_powersource_event_handler();
+ if (err)
+ goto err_unregister_device;
+ }
+
return 0;
err_unregister_device:
@@ -1772,6 +1925,9 @@ module_init(hp_wmi_init);
static void __exit hp_wmi_exit(void)
{
+ if (is_omen_thermal_profile() || is_victus_thermal_profile())
+ omen_unregister_powersource_event_handler();
+
if (wmi_has_guid(HPWMI_EVENT_GUID))
hp_wmi_input_destroy();
Fix a platform profile option switch/getter bug on some Omen and Victus laptops dismissing userspace choice when selecting performance mode in inadequate conditions (e.g. by being disconnected from the AC power plug) by - hooking an ACPI notify handler through the omen_register_powersource_event_handler method that listens to AC power source changes (plugging in/out the AC power plug) - keeping an intermediate active_platform_profile variable that is set when userspace changes the platform profile setting - restoring the selected platform profile kept in active_platform_profile when AC power is plugged back into the laptop through the power_supply_is_system_supplied call check, unless if the user decided to alter the platform profile mid-way Add a dependency to the POWER_SUPPLY subsystem to be able to check for power_supply_is_system_supplied. Introduce intermediary functions to leverage platform profile <-> internal thermal profile translation code from platform_profile_omen_set and callers. These changes makes the module compliant with the principles defined in the Platform Profile Selection page of the Kernel documentation on those kind of laptops; which is to not "(...) let userspace know about any sub-optimal conditions which are impeding reaching the requested performance level". Since the Omen and Victus laptops share the same embedded controller system, the fix is applicable to both categories of laptops. Signed-off-by: Alexis Belmonte <alexbelm48@gmail.com> --- V1 -> V2: - Use register_acpi_notifier and unregister_acpi_notifier instead of hooking straight through ACPI node \\_SB.ADP1 V2 -> V3: - Rely on power_supply_is_system_supplied() instead of an EC-specific field to determine if the laptop is plugged in - Refactor omen_powersource_notify_handler to omen_powersource_event - Refactor omen_powersource_register_notifier_handler to omen_register_powersource_event_handler - Use a mutex to protect the active_platform_profile variable from being altered while the handler is executed V3 -> V4: - Remove the unnecessary enum declaration remains from the initial implementation V4 -> V5: - Drop unnecessary modifications from the patch - Call platform_profile_omen_get in platform_profile_victus_get to avoid code duplication - Give-up module initialization if we fail to register the ACPI notifier handler - Fix code style issues reported by checkpatch.pl --strict - Add intermediary/helper platform_profile_omen_set_ec and platform_profile_victus_set_ec functions to leverage code from platform_profile_omen_set and callers, thus simplifying omen_powersource_event - Fix dead-lock when restoring active_platform_profile when the AC power is plugged back into the laptop V5 -> V6: - Drop unnecessary modifications from the patch V6 -> V7: - Drop EC platform profile readback after set - Lock the active_platform_profile mutex unconditionally - Drop the usage of ACPI_FAILURE in favor of a simpler error check when registering/unregistering the ACPI notifier - Initialize active_platform_profile in thermal_profile_setup V7 -> V8: - Pass profile as a value instead of a pointer for platform_profile_omen_set & platform_profile_victus_set as these functions no longer alter the parameter - Initialize active_platform_profile during thermal_profile_setup by reading the current platform profile from the embedded controller - Drop vestigial active_platform_profile initialization code - Add module dependency (select) to POWER_SUPPLY in Kconfig - Simplify thermal profile getter check in omen_powersource_event - Substitute omen_thermal_profile_get/omen_thermal_profile_set with platform_profile_omen_get_ec/platform_profile_omen_set_ec and platform_profile_victus_get_ec/platform_profile_victus_set_ec to simplify thermal_profile_setup V8 -> V9: - Add missing mutex_lock call in omen_powersource_event read failure code branch V9 -> V10: - Use imperative tone and update commit message to conform with the current revision of the patch - Use guard(mutex) over mutex_lock/mutex_unlock - Fix EC <-> user-chosen platform profile comparison in omen_powersource_event - Remove unregister_acpi_notifier error checking as it is non-fatal for the module unloading - Make omen_unregister_powersource_event_handler inline to avoid unnecessary function call overhead while still retaining functional symmetry with omen_register_powersource_event_handler --- drivers/platform/x86/hp/Kconfig | 1 + drivers/platform/x86/hp/hp-wmi.c | 190 ++++++++++++++++++++++++++++--- 2 files changed, 174 insertions(+), 17 deletions(-)