@@ -7,15 +7,40 @@
/dts-v1/;
+#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
+
#include "sdm845.dtsi"
+#include "pm8998.dtsi"
+#include "sdm845-wcd9340.dtsi"
+
+/delete-node/ &rmtfs_mem;
+/delete-node/ &adsp_mem;
+/delete-node/ &slpi_mem;
+/delete-node/ &spss_mem;
/ {
chassis-type = "handset";
model = "Samsung Galaxy S9 SM-G9600";
compatible = "samsung,starqltechn", "qcom,sdm845";
+ aliases {
+ serial0 = &uart9;
+ };
+
+ battery: battery {
+ compatible = "simple-battery";
+ constant-charge-current-max-microamp = <2150000>;
+ charge-full-design-microamp-hours = <3000000>;
+
+ over-voltage-threshold-microvolt = <4500000>;
+ voltage-min-design-microvolt = <3400000>;
+ voltage-max-design-microvolt = <4350000>;
+ };
+
chosen {
#address-cells = <2>;
#size-cells = <2>;
@@ -59,9 +84,199 @@ memory@a1300000 {
ftrace-size = <0x40000>;
pmsg-size = <0x40000>;
};
+
+ /* The rmtfs_mem needs to be guarded due to "XPU limitations"
+ * it is otherwise possible for an allocation adjacent to the
+ * rmtfs_mem region to trigger an XPU violation, causing a crash.
+ */
+ rmtfs_lower_guard: memory@fde00000 {
+ no-map;
+ reg = <0 0xfde00000 0 0x1000>;
+ };
+
+ rmtfs_mem: rmtfs-mem@fde01000 {
+ compatible = "qcom,rmtfs-mem";
+ reg = <0 0xfde01000 0 0x200000>;
+ no-map;
+
+ qcom,client-id = <1>;
+ qcom,vmid = <15>;
+ };
+
+ rmtfs_upper_guard: rmtfs-upper-guard@fe001000 {
+ no-map;
+ reg = <0 0xfe001000 0 0x1000>;
+ };
+
+ /*
+ * It seems like reserving the old rmtfs_mem region is also needed to prevent
+ * random crashes which are most likely modem related, more testing needed.
+ */
+ removed_region: removed-region@88f00000 {
+ no-map;
+ reg = <0 0x88f00000 0 0x1c00000>;
+ };
+
+ slpi_mem: slpi@96700000 {
+ reg = <0 0x96700000 0 0xf00000>;
+ no-map;
+ };
+
+ spss_mem: spss@97700000 {
+ reg = <0 0x97700000 0 0x100000>;
+ no-map;
+ };
+
+ adsp_mem: memory@97800000 {
+ reg = <0 0x97800000 0 0x2000000>;
+ no-map;
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ autorepeat;
+
+ key-vol-up {
+ label = "volume_up";
+ gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ debounce-interval = <15>;
+ };
+
+ key-wink {
+ label = "key_wink";
+ gpios = <&pm8998_gpios 19 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_ENTER>;
+ debounce-interval = <15>;
+ };
+ };
+
+ i2c21 {
+ compatible = "i2c-gpio";
+ sda-gpios = <&tlmm 127 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&tlmm 128 GPIO_ACTIVE_HIGH>;
+ i2c-gpio,delay-us = <2>;
+ pinctrl-0 = <&i2c21_sda_state &i2c21_scl_state>;
+ pinctrl-names = "default";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmic@60 {
+ compatible = "samsung,s2dos05-pmic";
+ reg = <0x60>;
+
+ regulators {
+ s2dos05_ldo1: ldo1 {
+ regulator-name = "s2dos05-ldo1";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-active-discharge = <1>;
+ };
+
+ s2dos05_ldo2: ldo2 {
+ regulator-name = "s2dos05-ldo2";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-active-discharge = <1>;
+ regulator-boot-on;
+ };
+
+ s2dos05_ldo3: ldo3 {
+ regulator-name = "s2dos05-ldo3";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-active-discharge = <1>;
+ regulator-boot-on;
+ };
+
+ s2dos05_ldo4: ldo4 {
+ regulator-name = "s2dos05-ldo4";
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <3775000>;
+ regulator-active-discharge = <1>;
+ };
+
+ s2dos05_buck1: buck1 {
+ regulator-name = "s2dos05-buck1";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <2100000>;
+ regulator-active-discharge = <1>;
+ };
+ };
+ };
+ };
+
+ vib_regulator: gpio-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "haptic";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&pm8998_gpios 18 GPIO_ACTIVE_HIGH>;
+ };
+
+ vib_pwm: pwm {
+ #pwm-cells = <2>;
+ compatible = "clk-pwm";
+ clocks = <&gcc GCC_GP1_CLK>;
+ pinctrl-0 = <&motor_pwm_default_state>;
+ pinctrl-1 = <&motor_pwm_suspend_state>;
+ pinctrl-names = "default", "suspend";
+ };
+};
+
+&gmu {
+ status = "okay";
+};
+
+&gpu {
+ status = "okay";
+
+ zap-shader {
+ memory-region = <&gpu_mem>;
+ firmware-name = "qcom/sdm845/starqltechn/a630_zap.mbn";
+ };
+};
+
+&mdss {
+ status = "okay";
+};
+
+&mdss_dsi0 {
+ vdda-supply = <&vreg_l26a_1p2>;
+ status = "okay";
+
+ panel@0 {
+ compatible = "samsung,s6e3ha8";
+ reg = <0>;
+ vci-supply = <&s2dos05_ldo4>;
+ vddr-supply = <&s2dos05_buck1>;
+ vdd3-supply = <&s2dos05_ldo1>;
+ te-gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&sde_dsi_default &sde_te>;
+ pinctrl-1 = <&sde_dsi_suspend &sde_te>;
+ pinctrl-names = "default", "suspend";
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&mdss_dsi0_out>;
+ };
+ };
};
};
+&mdss_dsi0_out {
+ data-lanes = <0 1 2 3>;
+ remote-endpoint = <&panel_in>;
+};
+
+&mdss_dsi0_phy {
+ vdds-supply = <&vdda_mipi_dsi0_pll>;
+ status = "okay";
+};
&apps_rsc {
regulators-0 {
@@ -355,10 +570,72 @@ &qupv3_id_1 {
status = "okay";
};
+&gpi_dma0 {
+ status = "okay";
+};
+
+&gpi_dma1 {
+ status = "okay";
+};
+
&uart9 {
status = "okay";
};
+&i2c14 {
+ status = "okay";
+
+ pmic@66 {
+ compatible = "maxim,max77705";
+ reg = <0x66>;
+ interrupt-parent = <&pm8998_gpios>;
+ interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "max77705_irq";
+ pinctrl-0 = <&chg_int_default>;
+ pinctrl-names = "default";
+
+ leds {
+ compatible = "maxim,max77705-led";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@1 {
+ reg = <1>;
+ label = "red:usr1";
+ };
+
+ led@2 {
+ reg = <2>;
+ label = "green:usr2";
+ };
+
+ led@3 {
+ reg = <3>;
+ label = "blue:usr3";
+ };
+ };
+
+ max77705_charger: charger {
+ compatible = "maxim,max77705-charger";
+ monitored-battery = <&battery>;
+ };
+
+ fuelgauge {
+ compatible = "maxim,max77705-fg";
+ monitored-battery = <&battery>;
+ power-supplies = <&max77705_charger>;
+ rsense = <5>;
+ };
+
+
+ haptic {
+ compatible = "maxim,max77705-haptic";
+ haptic-supply = <&vib_regulator>;
+ pwms = <&vib_pwm 0 50000>;
+ };
+ };
+};
+
&ufs_mem_hc {
reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
vcc-supply = <&vreg_l20a_2p95>;
@@ -373,14 +650,241 @@ &ufs_mem_phy {
};
&sdhc_2 {
- pinctrl-names = "default";
pinctrl-0 = <&sdc2_clk_state &sdc2_cmd_state &sdc2_data_state &sd_card_det_n_state>;
+ pinctrl-names = "default";
cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>;
vmmc-supply = <&vreg_l21a_2p95>;
vqmmc-supply = <&vddpx_2>;
status = "okay";
};
+&i2c11 {
+ clock-frequency = <400000>;
+ status = "okay";
+
+ touchscreen@48 {
+ compatible = "samsung,s6sy761";
+ reg = <0x48>;
+ interrupt-parent = <&tlmm>;
+ interrupts = <120 IRQ_TYPE_LEVEL_HIGH>;
+ vdd-supply = <&s2dos05_ldo2>;
+ avdd-supply = <&s2dos05_ldo3>;
+
+ pinctrl-0 = <&touch_irq_state>;
+ pinctrl-names = "default";
+ };
+};
+
+&adsp_pas {
+ firmware-name = "qcom/sdm845/starqltechn/adsp.mbn";
+ status = "okay";
+};
+
+&lpasscc {
+ status = "okay";
+};
+
+&wcd9340 {
+ reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
+ vdd-buck-supply = <&vreg_s4a_1p8>;
+ vdd-buck-sido-supply = <&vreg_s4a_1p8>;
+ vdd-tx-supply = <&vreg_s4a_1p8>;
+ vdd-rx-supply = <&vreg_s4a_1p8>;
+ vdd-io-supply = <&vreg_s4a_1p8>;
+ qcom,micbias1-microvolt = <1800000>;
+ qcom,micbias2-microvolt = <2700000>;
+ qcom,micbias3-microvolt = <1800000>;
+ qcom,micbias4-microvolt = <1800000>;
+};
+
+&sound {
+ compatible = "qcom,sdm845-sndcard";
+ model = "Samsung Galaxy S9";
+ pinctrl-0 = <&quat_mi2s_active &quat_mi2s_sd0_active &quat_mi2s_sd1_active>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ audio-routing = "RX_BIAS", "MCLK",
+ "AMIC2", "MIC BIAS2", /* Headset Mic */
+ "AMIC3", "MIC BIAS2", /* FMLeft Tx */
+ "AMIC4", "MIC BIAS2", /* FMRight Tx */
+ "DMIC0", "MIC BIAS1", /* Digital Mic0 */
+ "DMIC5", "MIC BIAS4", /* Digital Mic1 */
+ "DMIC4", "MIC BIAS4", /* Digital Mic2 */
+ "DMIC3", "MIC BIAS3", /* Digital Mic3 */
+ "DMIC2", "MIC BIAS3", /* Digital Mic4 */
+ "DMIC1", "MIC BIAS1"; /* Digital Mic5 */
+
+ mm1-dai-link {
+ link-name = "MultiMedia1";
+ cpu {
+ sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
+ };
+ };
+
+ mm2-dai-link {
+ link-name = "MultiMedia2";
+ cpu {
+ sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
+ };
+ };
+
+ mm3-dai-link {
+ link-name = "MultiMedia3";
+ cpu {
+ sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
+ };
+ };
+
+ mm4-dai-link {
+ link-name = "MultiMedia4";
+ cpu {
+ sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA4>;
+ };
+ };
+
+ mm5-dai-link {
+ link-name = "MultiMedia5";
+ cpu {
+ sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA5>;
+ };
+ };
+
+ mm6-dai-link {
+ link-name = "MultiMedia6";
+ cpu {
+ sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA6>;
+ };
+ };
+
+ slim-dai-link {
+ link-name = "SLIM Playback 1";
+ cpu {
+ sound-dai = <&q6afedai SLIMBUS_0_RX>;
+ };
+
+ platform {
+ sound-dai = <&q6routing>;
+ };
+
+ codec {
+ sound-dai = <&wcd9340 0>;
+ };
+ };
+
+ slimcap-dai-link {
+ link-name = "SLIM Capture 1";
+ cpu {
+ sound-dai = <&q6afedai SLIMBUS_0_TX>;
+ };
+
+ platform {
+ sound-dai = <&q6routing>;
+ };
+
+ codec {
+ sound-dai = <&wcd9340 1>;
+ };
+ };
+
+ slim2-dai-link {
+ link-name = "SLIM Playback 2";
+ cpu {
+ sound-dai = <&q6afedai SLIMBUS_1_RX>;
+ };
+
+ platform {
+ sound-dai = <&q6routing>;
+ };
+
+ codec {
+ sound-dai = <&wcd9340 2>; /* AIF2_PB */
+ };
+ };
+
+ slimcap2-dai-link {
+ link-name = "SLIM Capture 2";
+ cpu {
+ sound-dai = <&q6afedai SLIMBUS_1_TX>;
+ };
+
+ platform {
+ sound-dai = <&q6routing>;
+ };
+
+ codec {
+ sound-dai = <&wcd9340 3>; /* AIF2_CAP */
+ };
+ };
+
+ slimcap3-dai-link {
+ link-name = "SLIM Capture 3";
+ cpu {
+ sound-dai = <&q6afedai SLIMBUS_2_TX>;
+ };
+
+ platform {
+ sound-dai = <&q6routing>;
+ };
+
+ codec {
+ sound-dai = <&wcd9340 5>; /* AIF3_CAP */
+ };
+ };
+};
+
+&q6afedai {
+ dai@22 {
+ reg = <22>;
+ qcom,sd-lines = <1>;
+ };
+
+ dai@23 {
+ reg = <23>;
+ qcom,sd-lines = <0>;
+ };
+};
+
+&q6asmdai {
+ dai@0 {
+ reg = <0>;
+ };
+
+ dai@1 {
+ reg = <1>;
+ };
+
+ dai@2 {
+ reg = <2>;
+ };
+
+ dai@3 {
+ reg = <3>;
+ };
+
+ dai@4 {
+ reg = <4>;
+ };
+
+ dai@5 {
+ reg = <5>;
+ };
+};
+
+/* Modem/wifi */
+&mss_pil {
+ firmware-name = "qcom/sdm845/starqltechn/mba.mbn",
+ "qcom/sdm845/starqltechn/modem.mbn";
+ status = "okay";
+};
+
+&ipa {
+ qcom,gsi-loader = "self";
+ memory-region = <&ipa_fw_mem>;
+ firmware-name = "qcom/sdm845/starqltechn/ipa_fws.mbn";
+ status = "okay";
+};
+
&usb_1 {
status = "okay";
};
@@ -408,9 +912,45 @@ &usb_1_qmpphy {
status = "okay";
};
+&pm8998_resin {
+ linux,code = <KEY_VOLUMEDOWN>;
+ status = "okay";
+};
+
+&pm8998_gpios {
+ chg_int_default: chg-int-default-state {
+ pins = "gpio11";
+ function = "normal";
+ input-enable;
+ bias-disable;
+ power-source = <0>;
+ };
+};
+
&tlmm {
gpio-reserved-ranges = <0 4>, <27 4>, <81 4>, <85 4>;
+ sde_dsi_default: sde-dsi-default-state {
+ pins = "gpio6";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ sde_dsi_suspend: sde-dsi-suspend-state {
+ pins = "gpio6";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ sde_te: sde-te-state {
+ pins = "gpio10";
+ function = "mdp_vsync";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
sdc2_clk_state: sdc2-clk-state {
pins = "sdc2_clk";
bias-disable;
@@ -439,4 +979,55 @@ sd_card_det_n_state: sd-card-det-n-state {
function = "gpio";
bias-pull-up;
};
+
+ motor_pwm_default_state: motor-pwm-active-state {
+ pins = "gpio57";
+ function = "gcc_gp1";
+ drive-strength = <2>;
+ bias-disable;
+ output-high;
+ };
+
+ motor_pwm_suspend_state: motor-pwm-suspend-state {
+ pins = "gpio57";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ output-low;
+ };
+
+ i2c21_sda_state: i2c21-sda-state {
+ pins = "gpio127";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ i2c21_scl_state: i2c21-scl-state {
+ pins = "gpio128";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ touch_irq_state: touch-irq-state {
+ pins = "gpio120";
+ function = "gpio";
+ bias-disable;
+ };
+};
+
+&qup_uart9_tx {
+ drive-strength = <2>;
+ bias-pull-up;
+};
+
+&qup_uart9_rx {
+ drive-strength = <2>;
+ bias-pull-up;
+};
+
+&qup_i2c11_default {
+ drive-strength = <2>;
+ bias-disable;
};
Add support for new features: - sound (headphones and mics only) - gpu - panel - buttons - MAX77705 MFD: - charger - fuelgauge - haptic - led Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> --- .../boot/dts/qcom/sdm845-samsung-starqltechn.dts | 593 ++++++++++++++++++++- 1 file changed, 592 insertions(+), 1 deletion(-)