| Message ID | 20240709070317.24876-1-qiang.zhang1211@gmail.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [v2] rcu-tasks: Fix access non-existent percpu rtpcp variable in rcu_tasks_need_gpcb() | expand |
Hi Zqiang, I don't see any functional issue with the patch. Few style comments below: On Tue, Jul 9, 2024 at 12:33 PM Zqiang <qiang.zhang1211@gmail.com> wrote: > > For kernels built with CONFIG_FORCE_NR_CPUS=y, the nr_cpu_ids is > defined as NR_CPUS instead of the number of possible cpus, this > will cause the following system panic: > > [ 0.015349][ T0] smpboot: Allowing 4 CPUs, 0 hotplug CPUs > ... > [ 0.021342][ T0] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:512 nr_node_ids:1 > ... > [ 3.681252][ T15] BUG: unable to handle page fault for address: ffffffff9911c8c8 > [ 3.689415][ T45] ehci-pci 0000:00:1a.0: debug port 2 > [ 3.697008][ T15] #PF: supervisor read access in kernel mode > [ 3.697009][ T15] #PF: error_code(0x0000) - not-present page > [ 3.706233][ T45] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7e3c000 > [ 3.708152][ T15] PGD 40fa24067 P4D 40fa24067 PUD 40fa25063 PMD 410bff063 > [ 3.720380][ T45] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 > [ 3.720430][ T15] PTE 800ffffbefee3062 > [ 3.720431][ T15] Oops: 0000 [#1] PREEMPT SMP PTI > [ 3.727873][ T45] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06 > [ 3.734009][ T15] CPU: 0 PID: 15 Comm: rcu_tasks_trace Tainted: G W 6.6.21 #1 5dc7acf91a5e8e9ac9dcfc35bee0245691283ea6 > [ 3.734011][ T15] Hardware name: Dell Inc. OptiPlex 9020/005T15, BIOS A14 09/14/2015 > [ 3.734012][ T15] RIP: 0010:rcu_tasks_need_gpcb+0x25d/0x2c0 > [ 3.737962][ T45] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > [ 3.742877][ T15] RSP: 0018:ffffa371c00a3e60 EFLAGS: 00010082 > [ 3.751891][ T45] usb usb2: Product: EHCI Host Controller > [ 3.764495][ T15] > [ 3.764496][ T15] RAX: ffffffff98929ca0 RBX: ffffffff98b3b328 RCX: 0000000000021880 > [ 3.764497][ T15] RDX: ffffffff9911c880 RSI: 0000000000000000 RDI: 0000000000000000 > [ 3.772461][ T45] usb usb2: Manufacturer: Linux 6.6.21 ehci_hcd > [ 3.778248][ T15] RBP: 0000000000000202 R08: 0000000000000000 R09: 0000000000000000 > [ 3.778249][ T15] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000003 > [ 3.778249][ T15] R13: 0000000000000000 R14: 0000000000000001 R15: ffffffff98b3b320 > [ 3.786216][ T45] usb usb2: SerialNumber: 0000:00:1a.0 > [ 3.805811][ T15] FS: 0000000000000000(0000) GS:ffff8c781ea00000(0000) knlGS:0000000000000000 > [ 3.805813][ T15] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > [ 3.811993][ T45] hub 2-0:1.0: USB hub found > [ 3.817383][ T15] CR2: ffffffff9911c8c8 CR3: 000000040fa20005 CR4: 00000000001706f0 > [ 3.817385][ T15] Call Trace: > [ 3.817386][ T15] <TASK> > [ 3.817388][ T15] ? __die+0x23/0x80 > [ 3.819643][ T45] hub 2-0:1.0: 2 ports detected > [ 3.827481][ T15] ? page_fault_oops+0xa4/0x180 > [ 3.827485][ T15] ? exc_page_fault+0x152/0x180 > [ 3.922376][ T15] ? asm_exc_page_fault+0x26/0x40 > [ 3.927289][ T15] ? rcu_tasks_need_gpcb+0x25d/0x2c0 > [ 3.932459][ T15] ? __pfx_rcu_tasks_kthread+0x40/0x40 > [ 3.937806][ T15] rcu_tasks_one_gp+0x69/0x180 > [ 3.942451][ T15] rcu_tasks_kthread+0x94/0xc0 > [ 3.947096][ T15] kthread+0xe8/0x140 > [ 3.950956][ T15] ? __pfx_kthread+0x40/0x40 > [ 3.955425][ T15] ret_from_fork+0x34/0x80 > [ 3.959721][ T15] ? __pfx_kthread+0x40/0x40 > [ 3.964192][ T15] ret_from_fork_asm+0x1b/0x80 > [ 3.968841][ T15] </TASK> > For stacktraces, timestamps, process names and extra information should be avoided. smpboot: Allowing 4 CPUs, 0 hotplug CPUs ... setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:512 nr_node_ids:1 ... BUG: unable to handle page fault for address: ffffffff9911c8c8 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page CPU: 0 PID: 15 Comm: rcu_tasks_trace Tainted: G W 6.6.21 #1 5dc7acf91a5e8e9ac9dcfc35bee0245691283ea6 RIP: 0010:rcu_tasks_need_gpcb+0x25d/0x2c0 CR2: ffffffff9911c8c8 CR3: 000000040fa20005 CR4: 00000000001706f0 Call Trace: <TASK> ? __die+0x23/0x80 ? page_fault_oops+0xa4/0x180 ? exc_page_fault+0x152/0x180 ? asm_exc_page_fault+0x26/0x40 ? rcu_tasks_need_gpcb+0x25d/0x2c0 ? __pfx_rcu_tasks_kthread+0x40/0x40 rcu_tasks_one_gp+0x69/0x180 rcu_tasks_kthread+0x94/0xc0 kthread+0xe8/0x140 ? __pfx_kthread+0x40/0x40 ret_from_fork+0x34/0x80 ? __pfx_kthread+0x40/0x40 ret_from_fork_asm+0x1b/0x80 </TASK> > Consider that there may be holes in the CPU numbers, this commit s/this commit// [1] You can avoid specific details like below? Considering that there may be holes in the CPU numbers, use the maximum possible cpu number, instead of nr_cpu_ids, for configuring enqueue and dequeue limits. [1] https://docs.kernel.org/process/submitting-patches.html#submittingpatches Thanks Neeraj > use the maxcpu variable to store the CPU numbers after traversing > possible cpu, and generate the rcu_task_cpu_ids variable and assign > it to (maxcpu +1) instead of nr_cpu_ids. > > Closes: https://lore.kernel.org/linux-input/CALMA0xaTSMN+p4xUXkzrtR5r6k7hgoswcaXx7baR_z9r5jjskw@mail.gmail.com/T/#u > Reported-by: Zhixu Liu <zhixu.liu@gmail.com> > Signed-off-by: Zqiang <qiang.zhang1211@gmail.com> > --- > kernel/rcu/tasks.h | 80 +++++++++++++++++++++++++++++----------------- > 1 file changed, 51 insertions(+), 29 deletions(-) > > diff --git a/kernel/rcu/tasks.h b/kernel/rcu/tasks.h > index 2b1d6abf3ba3..12d63ce84cc9 100644 > --- a/kernel/rcu/tasks.h > +++ b/kernel/rcu/tasks.h > @@ -49,6 +49,7 @@ struct rcu_tasks_percpu { > struct list_head rtp_blkd_tasks; > struct list_head rtp_exit_list; > int cpu; > + int index; > struct rcu_tasks *rtpp; > }; > > @@ -110,6 +111,7 @@ struct rcu_tasks { > call_rcu_func_t call_func; > unsigned int wait_state; > struct rcu_tasks_percpu __percpu *rtpcpu; > + struct rcu_tasks_percpu **rtpcp_array; > int percpu_enqueue_shift; > int percpu_enqueue_lim; > int percpu_dequeue_lim; > @@ -182,6 +184,8 @@ module_param(rcu_task_collapse_lim, int, 0444); > static int rcu_task_lazy_lim __read_mostly = 32; > module_param(rcu_task_lazy_lim, int, 0444); > > +static int rcu_task_cpu_ids; > + > /* RCU tasks grace-period state for debugging. */ > #define RTGS_INIT 0 > #define RTGS_WAIT_WAIT_CBS 1 > @@ -245,6 +249,8 @@ static void cblist_init_generic(struct rcu_tasks *rtp) > int cpu; > int lim; > int shift; > + int maxcpu; > + int index = 0; > > if (rcu_task_enqueue_lim < 0) { > rcu_task_enqueue_lim = 1; > @@ -254,14 +260,9 @@ static void cblist_init_generic(struct rcu_tasks *rtp) > } > lim = rcu_task_enqueue_lim; > > - if (lim > nr_cpu_ids) > - lim = nr_cpu_ids; > - shift = ilog2(nr_cpu_ids / lim); > - if (((nr_cpu_ids - 1) >> shift) >= lim) > - shift++; > - WRITE_ONCE(rtp->percpu_enqueue_shift, shift); > - WRITE_ONCE(rtp->percpu_dequeue_lim, lim); > - smp_store_release(&rtp->percpu_enqueue_lim, lim); > + rtp->rtpcp_array = kcalloc(num_possible_cpus(), sizeof(struct rcu_tasks_percpu *), GFP_KERNEL); > + BUG_ON(!rtp->rtpcp_array); > + > for_each_possible_cpu(cpu) { > struct rcu_tasks_percpu *rtpcp = per_cpu_ptr(rtp->rtpcpu, cpu); > > @@ -273,14 +274,29 @@ static void cblist_init_generic(struct rcu_tasks *rtp) > INIT_WORK(&rtpcp->rtp_work, rcu_tasks_invoke_cbs_wq); > rtpcp->cpu = cpu; > rtpcp->rtpp = rtp; > + rtpcp->index = index; > + rtp->rtpcp_array[index] = rtpcp; > + index++; > if (!rtpcp->rtp_blkd_tasks.next) > INIT_LIST_HEAD(&rtpcp->rtp_blkd_tasks); > if (!rtpcp->rtp_exit_list.next) > INIT_LIST_HEAD(&rtpcp->rtp_exit_list); > + maxcpu = cpu; > } > > - pr_info("%s: Setting shift to %d and lim to %d rcu_task_cb_adjust=%d.\n", rtp->name, > - data_race(rtp->percpu_enqueue_shift), data_race(rtp->percpu_enqueue_lim), rcu_task_cb_adjust); > + rcu_task_cpu_ids = maxcpu + 1; > + if (lim > rcu_task_cpu_ids) > + lim = rcu_task_cpu_ids; > + shift = ilog2(rcu_task_cpu_ids / lim); > + if (((rcu_task_cpu_ids - 1) >> shift) >= lim) > + shift++; > + WRITE_ONCE(rtp->percpu_enqueue_shift, shift); > + WRITE_ONCE(rtp->percpu_dequeue_lim, lim); > + smp_store_release(&rtp->percpu_enqueue_lim, lim); > + > + pr_info("%s: Setting shift to %d and lim to %d rcu_task_cb_adjust=%d rcu_task_cpu_ids=%d.\n", > + rtp->name, data_race(rtp->percpu_enqueue_shift), data_race(rtp->percpu_enqueue_lim), > + rcu_task_cb_adjust, rcu_task_cpu_ids); > } > > // Compute wakeup time for lazy callback timer. > @@ -348,7 +364,7 @@ static void call_rcu_tasks_generic(struct rcu_head *rhp, rcu_callback_t func, > rtpcp->rtp_n_lock_retries = 0; > } > if (rcu_task_cb_adjust && ++rtpcp->rtp_n_lock_retries > rcu_task_contend_lim && > - READ_ONCE(rtp->percpu_enqueue_lim) != nr_cpu_ids) > + READ_ONCE(rtp->percpu_enqueue_lim) != rcu_task_cpu_ids) > needadjust = true; // Defer adjustment to avoid deadlock. > } > // Queuing callbacks before initialization not yet supported. > @@ -368,10 +384,10 @@ static void call_rcu_tasks_generic(struct rcu_head *rhp, rcu_callback_t func, > raw_spin_unlock_irqrestore_rcu_node(rtpcp, flags); > if (unlikely(needadjust)) { > raw_spin_lock_irqsave(&rtp->cbs_gbl_lock, flags); > - if (rtp->percpu_enqueue_lim != nr_cpu_ids) { > + if (rtp->percpu_enqueue_lim != rcu_task_cpu_ids) { > WRITE_ONCE(rtp->percpu_enqueue_shift, 0); > - WRITE_ONCE(rtp->percpu_dequeue_lim, nr_cpu_ids); > - smp_store_release(&rtp->percpu_enqueue_lim, nr_cpu_ids); > + WRITE_ONCE(rtp->percpu_dequeue_lim, rcu_task_cpu_ids); > + smp_store_release(&rtp->percpu_enqueue_lim, rcu_task_cpu_ids); > pr_info("Switching %s to per-CPU callback queuing.\n", rtp->name); > } > raw_spin_unlock_irqrestore(&rtp->cbs_gbl_lock, flags); > @@ -444,6 +460,8 @@ static int rcu_tasks_need_gpcb(struct rcu_tasks *rtp) > > dequeue_limit = smp_load_acquire(&rtp->percpu_dequeue_lim); > for (cpu = 0; cpu < dequeue_limit; cpu++) { > + if (!cpu_possible(cpu)) > + continue; > struct rcu_tasks_percpu *rtpcp = per_cpu_ptr(rtp->rtpcpu, cpu); > > /* Advance and accelerate any new callbacks. */ > @@ -481,7 +499,7 @@ static int rcu_tasks_need_gpcb(struct rcu_tasks *rtp) > if (rcu_task_cb_adjust && ncbs <= rcu_task_collapse_lim) { > raw_spin_lock_irqsave(&rtp->cbs_gbl_lock, flags); > if (rtp->percpu_enqueue_lim > 1) { > - WRITE_ONCE(rtp->percpu_enqueue_shift, order_base_2(nr_cpu_ids)); > + WRITE_ONCE(rtp->percpu_enqueue_shift, order_base_2(rcu_task_cpu_ids)); > smp_store_release(&rtp->percpu_enqueue_lim, 1); > rtp->percpu_dequeue_gpseq = get_state_synchronize_rcu(); > gpdone = false; > @@ -496,7 +514,9 @@ static int rcu_tasks_need_gpcb(struct rcu_tasks *rtp) > pr_info("Completing switch %s to CPU-0 callback queuing.\n", rtp->name); > } > if (rtp->percpu_dequeue_lim == 1) { > - for (cpu = rtp->percpu_dequeue_lim; cpu < nr_cpu_ids; cpu++) { > + for (cpu = rtp->percpu_dequeue_lim; cpu < rcu_task_cpu_ids; cpu++) { > + if (!cpu_possible(cpu)) > + continue; > struct rcu_tasks_percpu *rtpcp = per_cpu_ptr(rtp->rtpcpu, cpu); > > WARN_ON_ONCE(rcu_segcblist_n_cbs(&rtpcp->cblist)); > @@ -511,30 +531,32 @@ static int rcu_tasks_need_gpcb(struct rcu_tasks *rtp) > // Advance callbacks and invoke any that are ready. > static void rcu_tasks_invoke_cbs(struct rcu_tasks *rtp, struct rcu_tasks_percpu *rtpcp) > { > - int cpu; > - int cpunext; > int cpuwq; > unsigned long flags; > int len; > + int index; > struct rcu_head *rhp; > struct rcu_cblist rcl = RCU_CBLIST_INITIALIZER(rcl); > struct rcu_tasks_percpu *rtpcp_next; > > - cpu = rtpcp->cpu; > - cpunext = cpu * 2 + 1; > - if (cpunext < smp_load_acquire(&rtp->percpu_dequeue_lim)) { > - rtpcp_next = per_cpu_ptr(rtp->rtpcpu, cpunext); > - cpuwq = rcu_cpu_beenfullyonline(cpunext) ? cpunext : WORK_CPU_UNBOUND; > - queue_work_on(cpuwq, system_wq, &rtpcp_next->rtp_work); > - cpunext++; > - if (cpunext < smp_load_acquire(&rtp->percpu_dequeue_lim)) { > - rtpcp_next = per_cpu_ptr(rtp->rtpcpu, cpunext); > - cpuwq = rcu_cpu_beenfullyonline(cpunext) ? cpunext : WORK_CPU_UNBOUND; > + index = rtpcp->index * 2 + 1; > + if (index < num_possible_cpus()) { > + rtpcp_next = rtp->rtpcp_array[index]; > + if (rtpcp_next->cpu < smp_load_acquire(&rtp->percpu_dequeue_lim)) { > + cpuwq = rcu_cpu_beenfullyonline(rtpcp_next->cpu) ? rtpcp_next->cpu : WORK_CPU_UNBOUND; > queue_work_on(cpuwq, system_wq, &rtpcp_next->rtp_work); > + index++; > + if (index < num_possible_cpus()) { > + rtpcp_next = rtp->rtpcp_array[index]; > + if (rtpcp_next->cpu < smp_load_acquire(&rtp->percpu_dequeue_lim)) { > + cpuwq = rcu_cpu_beenfullyonline(rtpcp_next->cpu) ? rtpcp_next->cpu : WORK_CPU_UNBOUND; > + queue_work_on(cpuwq, system_wq, &rtpcp_next->rtp_work); > + } > + } > } > } > > - if (rcu_segcblist_empty(&rtpcp->cblist) || !cpu_possible(cpu)) > + if (rcu_segcblist_empty(&rtpcp->cblist)) > return; > raw_spin_lock_irqsave_rcu_node(rtpcp, flags); > rcu_segcblist_advance(&rtpcp->cblist, rcu_seq_current(&rtp->tasks_gp_seq)); > -- > 2.17.1 >
> > Hi Zqiang, > > I don't see any functional issue with the patch. Few style comments below: > > On Tue, Jul 9, 2024 at 12:33 PM Zqiang <qiang.zhang1211@gmail.com> wrote: > > > > For kernels built with CONFIG_FORCE_NR_CPUS=y, the nr_cpu_ids is > > defined as NR_CPUS instead of the number of possible cpus, this > > will cause the following system panic: > > > > [ 0.015349][ T0] smpboot: Allowing 4 CPUs, 0 hotplug CPUs > > ... > > [ 0.021342][ T0] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:512 nr_node_ids:1 > > ... > > [ 3.681252][ T15] BUG: unable to handle page fault for address: ffffffff9911c8c8 > > [ 3.689415][ T45] ehci-pci 0000:00:1a.0: debug port 2 > > [ 3.697008][ T15] #PF: supervisor read access in kernel mode > > [ 3.697009][ T15] #PF: error_code(0x0000) - not-present page > > [ 3.706233][ T45] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7e3c000 > > [ 3.708152][ T15] PGD 40fa24067 P4D 40fa24067 PUD 40fa25063 PMD 410bff063 > > [ 3.720380][ T45] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 > > [ 3.720430][ T15] PTE 800ffffbefee3062 > > [ 3.720431][ T15] Oops: 0000 [#1] PREEMPT SMP PTI > > [ 3.727873][ T45] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06 > > [ 3.734009][ T15] CPU: 0 PID: 15 Comm: rcu_tasks_trace Tainted: G W 6.6.21 #1 5dc7acf91a5e8e9ac9dcfc35bee0245691283ea6 > > [ 3.734011][ T15] Hardware name: Dell Inc. OptiPlex 9020/005T15, BIOS A14 09/14/2015 > > [ 3.734012][ T15] RIP: 0010:rcu_tasks_need_gpcb+0x25d/0x2c0 > > [ 3.737962][ T45] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > > [ 3.742877][ T15] RSP: 0018:ffffa371c00a3e60 EFLAGS: 00010082 > > [ 3.751891][ T45] usb usb2: Product: EHCI Host Controller > > [ 3.764495][ T15] > > [ 3.764496][ T15] RAX: ffffffff98929ca0 RBX: ffffffff98b3b328 RCX: 0000000000021880 > > [ 3.764497][ T15] RDX: ffffffff9911c880 RSI: 0000000000000000 RDI: 0000000000000000 > > [ 3.772461][ T45] usb usb2: Manufacturer: Linux 6.6.21 ehci_hcd > > [ 3.778248][ T15] RBP: 0000000000000202 R08: 0000000000000000 R09: 0000000000000000 > > [ 3.778249][ T15] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000003 > > [ 3.778249][ T15] R13: 0000000000000000 R14: 0000000000000001 R15: ffffffff98b3b320 > > [ 3.786216][ T45] usb usb2: SerialNumber: 0000:00:1a.0 > > [ 3.805811][ T15] FS: 0000000000000000(0000) GS:ffff8c781ea00000(0000) knlGS:0000000000000000 > > [ 3.805813][ T15] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > > [ 3.811993][ T45] hub 2-0:1.0: USB hub found > > [ 3.817383][ T15] CR2: ffffffff9911c8c8 CR3: 000000040fa20005 CR4: 00000000001706f0 > > [ 3.817385][ T15] Call Trace: > > [ 3.817386][ T15] <TASK> > > [ 3.817388][ T15] ? __die+0x23/0x80 > > [ 3.819643][ T45] hub 2-0:1.0: 2 ports detected > > [ 3.827481][ T15] ? page_fault_oops+0xa4/0x180 > > [ 3.827485][ T15] ? exc_page_fault+0x152/0x180 > > [ 3.922376][ T15] ? asm_exc_page_fault+0x26/0x40 > > [ 3.927289][ T15] ? rcu_tasks_need_gpcb+0x25d/0x2c0 > > [ 3.932459][ T15] ? __pfx_rcu_tasks_kthread+0x40/0x40 > > [ 3.937806][ T15] rcu_tasks_one_gp+0x69/0x180 > > [ 3.942451][ T15] rcu_tasks_kthread+0x94/0xc0 > > [ 3.947096][ T15] kthread+0xe8/0x140 > > [ 3.950956][ T15] ? __pfx_kthread+0x40/0x40 > > [ 3.955425][ T15] ret_from_fork+0x34/0x80 > > [ 3.959721][ T15] ? __pfx_kthread+0x40/0x40 > > [ 3.964192][ T15] ret_from_fork_asm+0x1b/0x80 > > [ 3.968841][ T15] </TASK> > > > > For stacktraces, timestamps, process names and extra information should be > avoided. OK, I didn't notice this before, thanks for reminding me :) > > smpboot: Allowing 4 CPUs, 0 hotplug CPUs > ... > setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:512 nr_node_ids:1 > ... > BUG: unable to handle page fault for address: ffffffff9911c8c8 > #PF: supervisor read access in kernel mode > #PF: error_code(0x0000) - not-present page > CPU: 0 PID: 15 Comm: rcu_tasks_trace Tainted: G W 6.6.21 #1 > 5dc7acf91a5e8e9ac9dcfc35bee0245691283ea6 > RIP: 0010:rcu_tasks_need_gpcb+0x25d/0x2c0 > CR2: ffffffff9911c8c8 CR3: 000000040fa20005 CR4: 00000000001706f0 > Call Trace: > <TASK> > ? __die+0x23/0x80 > ? page_fault_oops+0xa4/0x180 > ? exc_page_fault+0x152/0x180 > ? asm_exc_page_fault+0x26/0x40 > ? rcu_tasks_need_gpcb+0x25d/0x2c0 > ? __pfx_rcu_tasks_kthread+0x40/0x40 > rcu_tasks_one_gp+0x69/0x180 > rcu_tasks_kthread+0x94/0xc0 > kthread+0xe8/0x140 > ? __pfx_kthread+0x40/0x40 > ret_from_fork+0x34/0x80 > ? __pfx_kthread+0x40/0x40 > ret_from_fork_asm+0x1b/0x80 > </TASK> > > > Consider that there may be holes in the CPU numbers, this commit > > s/this commit// [1] > You can avoid specific details like below? > > Considering that there may be holes in the CPU numbers, use the > maximum possible cpu number, instead of nr_cpu_ids, for configuring > enqueue and dequeue limits. Will update :) Thanks Zqiang > > [1] https://docs.kernel.org/process/submitting-patches.html#submittingpatches > > > Thanks > Neeraj > > > use the maxcpu variable to store the CPU numbers after traversing > > possible cpu, and generate the rcu_task_cpu_ids variable and assign > > it to (maxcpu +1) instead of nr_cpu_ids. > > > > Closes: https://lore.kernel.org/linux-input/CALMA0xaTSMN+p4xUXkzrtR5r6k7hgoswcaXx7baR_z9r5jjskw@mail.gmail.com/T/#u > > Reported-by: Zhixu Liu <zhixu.liu@gmail.com> > > Signed-off-by: Zqiang <qiang.zhang1211@gmail.com> > > --- > > kernel/rcu/tasks.h | 80 +++++++++++++++++++++++++++++----------------- > > 1 file changed, 51 insertions(+), 29 deletions(-) > > > > diff --git a/kernel/rcu/tasks.h b/kernel/rcu/tasks.h > > index 2b1d6abf3ba3..12d63ce84cc9 100644 > > --- a/kernel/rcu/tasks.h > > +++ b/kernel/rcu/tasks.h > > @@ -49,6 +49,7 @@ struct rcu_tasks_percpu { > > struct list_head rtp_blkd_tasks; > > struct list_head rtp_exit_list; > > int cpu; > > + int index; > > struct rcu_tasks *rtpp; > > }; > > > > @@ -110,6 +111,7 @@ struct rcu_tasks { > > call_rcu_func_t call_func; > > unsigned int wait_state; > > struct rcu_tasks_percpu __percpu *rtpcpu; > > + struct rcu_tasks_percpu **rtpcp_array; > > int percpu_enqueue_shift; > > int percpu_enqueue_lim; > > int percpu_dequeue_lim; > > @@ -182,6 +184,8 @@ module_param(rcu_task_collapse_lim, int, 0444); > > static int rcu_task_lazy_lim __read_mostly = 32; > > module_param(rcu_task_lazy_lim, int, 0444); > > > > +static int rcu_task_cpu_ids; > > + > > /* RCU tasks grace-period state for debugging. */ > > #define RTGS_INIT 0 > > #define RTGS_WAIT_WAIT_CBS 1 > > @@ -245,6 +249,8 @@ static void cblist_init_generic(struct rcu_tasks *rtp) > > int cpu; > > int lim; > > int shift; > > + int maxcpu; > > + int index = 0; > > > > if (rcu_task_enqueue_lim < 0) { > > rcu_task_enqueue_lim = 1; > > @@ -254,14 +260,9 @@ static void cblist_init_generic(struct rcu_tasks *rtp) > > } > > lim = rcu_task_enqueue_lim; > > > > - if (lim > nr_cpu_ids) > > - lim = nr_cpu_ids; > > - shift = ilog2(nr_cpu_ids / lim); > > - if (((nr_cpu_ids - 1) >> shift) >= lim) > > - shift++; > > - WRITE_ONCE(rtp->percpu_enqueue_shift, shift); > > - WRITE_ONCE(rtp->percpu_dequeue_lim, lim); > > - smp_store_release(&rtp->percpu_enqueue_lim, lim); > > + rtp->rtpcp_array = kcalloc(num_possible_cpus(), sizeof(struct rcu_tasks_percpu *), GFP_KERNEL); > > + BUG_ON(!rtp->rtpcp_array); > > + > > for_each_possible_cpu(cpu) { > > struct rcu_tasks_percpu *rtpcp = per_cpu_ptr(rtp->rtpcpu, cpu); > > > > @@ -273,14 +274,29 @@ static void cblist_init_generic(struct rcu_tasks *rtp) > > INIT_WORK(&rtpcp->rtp_work, rcu_tasks_invoke_cbs_wq); > > rtpcp->cpu = cpu; > > rtpcp->rtpp = rtp; > > + rtpcp->index = index; > > + rtp->rtpcp_array[index] = rtpcp; > > + index++; > > if (!rtpcp->rtp_blkd_tasks.next) > > INIT_LIST_HEAD(&rtpcp->rtp_blkd_tasks); > > if (!rtpcp->rtp_exit_list.next) > > INIT_LIST_HEAD(&rtpcp->rtp_exit_list); > > + maxcpu = cpu; > > } > > > > - pr_info("%s: Setting shift to %d and lim to %d rcu_task_cb_adjust=%d.\n", rtp->name, > > - data_race(rtp->percpu_enqueue_shift), data_race(rtp->percpu_enqueue_lim), rcu_task_cb_adjust); > > + rcu_task_cpu_ids = maxcpu + 1; > > + if (lim > rcu_task_cpu_ids) > > + lim = rcu_task_cpu_ids; > > + shift = ilog2(rcu_task_cpu_ids / lim); > > + if (((rcu_task_cpu_ids - 1) >> shift) >= lim) > > + shift++; > > + WRITE_ONCE(rtp->percpu_enqueue_shift, shift); > > + WRITE_ONCE(rtp->percpu_dequeue_lim, lim); > > + smp_store_release(&rtp->percpu_enqueue_lim, lim); > > + > > + pr_info("%s: Setting shift to %d and lim to %d rcu_task_cb_adjust=%d rcu_task_cpu_ids=%d.\n", > > + rtp->name, data_race(rtp->percpu_enqueue_shift), data_race(rtp->percpu_enqueue_lim), > > + rcu_task_cb_adjust, rcu_task_cpu_ids); > > } > > > > // Compute wakeup time for lazy callback timer. > > @@ -348,7 +364,7 @@ static void call_rcu_tasks_generic(struct rcu_head *rhp, rcu_callback_t func, > > rtpcp->rtp_n_lock_retries = 0; > > } > > if (rcu_task_cb_adjust && ++rtpcp->rtp_n_lock_retries > rcu_task_contend_lim && > > - READ_ONCE(rtp->percpu_enqueue_lim) != nr_cpu_ids) > > + READ_ONCE(rtp->percpu_enqueue_lim) != rcu_task_cpu_ids) > > needadjust = true; // Defer adjustment to avoid deadlock. > > } > > // Queuing callbacks before initialization not yet supported. > > @@ -368,10 +384,10 @@ static void call_rcu_tasks_generic(struct rcu_head *rhp, rcu_callback_t func, > > raw_spin_unlock_irqrestore_rcu_node(rtpcp, flags); > > if (unlikely(needadjust)) { > > raw_spin_lock_irqsave(&rtp->cbs_gbl_lock, flags); > > - if (rtp->percpu_enqueue_lim != nr_cpu_ids) { > > + if (rtp->percpu_enqueue_lim != rcu_task_cpu_ids) { > > WRITE_ONCE(rtp->percpu_enqueue_shift, 0); > > - WRITE_ONCE(rtp->percpu_dequeue_lim, nr_cpu_ids); > > - smp_store_release(&rtp->percpu_enqueue_lim, nr_cpu_ids); > > + WRITE_ONCE(rtp->percpu_dequeue_lim, rcu_task_cpu_ids); > > + smp_store_release(&rtp->percpu_enqueue_lim, rcu_task_cpu_ids); > > pr_info("Switching %s to per-CPU callback queuing.\n", rtp->name); > > } > > raw_spin_unlock_irqrestore(&rtp->cbs_gbl_lock, flags); > > @@ -444,6 +460,8 @@ static int rcu_tasks_need_gpcb(struct rcu_tasks *rtp) > > > > dequeue_limit = smp_load_acquire(&rtp->percpu_dequeue_lim); > > for (cpu = 0; cpu < dequeue_limit; cpu++) { > > + if (!cpu_possible(cpu)) > > + continue; > > struct rcu_tasks_percpu *rtpcp = per_cpu_ptr(rtp->rtpcpu, cpu); > > > > /* Advance and accelerate any new callbacks. */ > > @@ -481,7 +499,7 @@ static int rcu_tasks_need_gpcb(struct rcu_tasks *rtp) > > if (rcu_task_cb_adjust && ncbs <= rcu_task_collapse_lim) { > > raw_spin_lock_irqsave(&rtp->cbs_gbl_lock, flags); > > if (rtp->percpu_enqueue_lim > 1) { > > - WRITE_ONCE(rtp->percpu_enqueue_shift, order_base_2(nr_cpu_ids)); > > + WRITE_ONCE(rtp->percpu_enqueue_shift, order_base_2(rcu_task_cpu_ids)); > > smp_store_release(&rtp->percpu_enqueue_lim, 1); > > rtp->percpu_dequeue_gpseq = get_state_synchronize_rcu(); > > gpdone = false; > > @@ -496,7 +514,9 @@ static int rcu_tasks_need_gpcb(struct rcu_tasks *rtp) > > pr_info("Completing switch %s to CPU-0 callback queuing.\n", rtp->name); > > } > > if (rtp->percpu_dequeue_lim == 1) { > > - for (cpu = rtp->percpu_dequeue_lim; cpu < nr_cpu_ids; cpu++) { > > + for (cpu = rtp->percpu_dequeue_lim; cpu < rcu_task_cpu_ids; cpu++) { > > + if (!cpu_possible(cpu)) > > + continue; > > struct rcu_tasks_percpu *rtpcp = per_cpu_ptr(rtp->rtpcpu, cpu); > > > > WARN_ON_ONCE(rcu_segcblist_n_cbs(&rtpcp->cblist)); > > @@ -511,30 +531,32 @@ static int rcu_tasks_need_gpcb(struct rcu_tasks *rtp) > > // Advance callbacks and invoke any that are ready. > > static void rcu_tasks_invoke_cbs(struct rcu_tasks *rtp, struct rcu_tasks_percpu *rtpcp) > > { > > - int cpu; > > - int cpunext; > > int cpuwq; > > unsigned long flags; > > int len; > > + int index; > > struct rcu_head *rhp; > > struct rcu_cblist rcl = RCU_CBLIST_INITIALIZER(rcl); > > struct rcu_tasks_percpu *rtpcp_next; > > > > - cpu = rtpcp->cpu; > > - cpunext = cpu * 2 + 1; > > - if (cpunext < smp_load_acquire(&rtp->percpu_dequeue_lim)) { > > - rtpcp_next = per_cpu_ptr(rtp->rtpcpu, cpunext); > > - cpuwq = rcu_cpu_beenfullyonline(cpunext) ? cpunext : WORK_CPU_UNBOUND; > > - queue_work_on(cpuwq, system_wq, &rtpcp_next->rtp_work); > > - cpunext++; > > - if (cpunext < smp_load_acquire(&rtp->percpu_dequeue_lim)) { > > - rtpcp_next = per_cpu_ptr(rtp->rtpcpu, cpunext); > > - cpuwq = rcu_cpu_beenfullyonline(cpunext) ? cpunext : WORK_CPU_UNBOUND; > > + index = rtpcp->index * 2 + 1; > > + if (index < num_possible_cpus()) { > > + rtpcp_next = rtp->rtpcp_array[index]; > > + if (rtpcp_next->cpu < smp_load_acquire(&rtp->percpu_dequeue_lim)) { > > + cpuwq = rcu_cpu_beenfullyonline(rtpcp_next->cpu) ? rtpcp_next->cpu : WORK_CPU_UNBOUND; > > queue_work_on(cpuwq, system_wq, &rtpcp_next->rtp_work); > > + index++; > > + if (index < num_possible_cpus()) { > > + rtpcp_next = rtp->rtpcp_array[index]; > > + if (rtpcp_next->cpu < smp_load_acquire(&rtp->percpu_dequeue_lim)) { > > + cpuwq = rcu_cpu_beenfullyonline(rtpcp_next->cpu) ? rtpcp_next->cpu : WORK_CPU_UNBOUND; > > + queue_work_on(cpuwq, system_wq, &rtpcp_next->rtp_work); > > + } > > + } > > } > > } > > > > - if (rcu_segcblist_empty(&rtpcp->cblist) || !cpu_possible(cpu)) > > + if (rcu_segcblist_empty(&rtpcp->cblist)) > > return; > > raw_spin_lock_irqsave_rcu_node(rtpcp, flags); > > rcu_segcblist_advance(&rtpcp->cblist, rcu_seq_current(&rtp->tasks_gp_seq)); > > -- > > 2.17.1 > >
diff --git a/kernel/rcu/tasks.h b/kernel/rcu/tasks.h index 2b1d6abf3ba3..12d63ce84cc9 100644 --- a/kernel/rcu/tasks.h +++ b/kernel/rcu/tasks.h @@ -49,6 +49,7 @@ struct rcu_tasks_percpu { struct list_head rtp_blkd_tasks; struct list_head rtp_exit_list; int cpu; + int index; struct rcu_tasks *rtpp; }; @@ -110,6 +111,7 @@ struct rcu_tasks { call_rcu_func_t call_func; unsigned int wait_state; struct rcu_tasks_percpu __percpu *rtpcpu; + struct rcu_tasks_percpu **rtpcp_array; int percpu_enqueue_shift; int percpu_enqueue_lim; int percpu_dequeue_lim; @@ -182,6 +184,8 @@ module_param(rcu_task_collapse_lim, int, 0444); static int rcu_task_lazy_lim __read_mostly = 32; module_param(rcu_task_lazy_lim, int, 0444); +static int rcu_task_cpu_ids; + /* RCU tasks grace-period state for debugging. */ #define RTGS_INIT 0 #define RTGS_WAIT_WAIT_CBS 1 @@ -245,6 +249,8 @@ static void cblist_init_generic(struct rcu_tasks *rtp) int cpu; int lim; int shift; + int maxcpu; + int index = 0; if (rcu_task_enqueue_lim < 0) { rcu_task_enqueue_lim = 1; @@ -254,14 +260,9 @@ static void cblist_init_generic(struct rcu_tasks *rtp) } lim = rcu_task_enqueue_lim; - if (lim > nr_cpu_ids) - lim = nr_cpu_ids; - shift = ilog2(nr_cpu_ids / lim); - if (((nr_cpu_ids - 1) >> shift) >= lim) - shift++; - WRITE_ONCE(rtp->percpu_enqueue_shift, shift); - WRITE_ONCE(rtp->percpu_dequeue_lim, lim); - smp_store_release(&rtp->percpu_enqueue_lim, lim); + rtp->rtpcp_array = kcalloc(num_possible_cpus(), sizeof(struct rcu_tasks_percpu *), GFP_KERNEL); + BUG_ON(!rtp->rtpcp_array); + for_each_possible_cpu(cpu) { struct rcu_tasks_percpu *rtpcp = per_cpu_ptr(rtp->rtpcpu, cpu); @@ -273,14 +274,29 @@ static void cblist_init_generic(struct rcu_tasks *rtp) INIT_WORK(&rtpcp->rtp_work, rcu_tasks_invoke_cbs_wq); rtpcp->cpu = cpu; rtpcp->rtpp = rtp; + rtpcp->index = index; + rtp->rtpcp_array[index] = rtpcp; + index++; if (!rtpcp->rtp_blkd_tasks.next) INIT_LIST_HEAD(&rtpcp->rtp_blkd_tasks); if (!rtpcp->rtp_exit_list.next) INIT_LIST_HEAD(&rtpcp->rtp_exit_list); + maxcpu = cpu; } - pr_info("%s: Setting shift to %d and lim to %d rcu_task_cb_adjust=%d.\n", rtp->name, - data_race(rtp->percpu_enqueue_shift), data_race(rtp->percpu_enqueue_lim), rcu_task_cb_adjust); + rcu_task_cpu_ids = maxcpu + 1; + if (lim > rcu_task_cpu_ids) + lim = rcu_task_cpu_ids; + shift = ilog2(rcu_task_cpu_ids / lim); + if (((rcu_task_cpu_ids - 1) >> shift) >= lim) + shift++; + WRITE_ONCE(rtp->percpu_enqueue_shift, shift); + WRITE_ONCE(rtp->percpu_dequeue_lim, lim); + smp_store_release(&rtp->percpu_enqueue_lim, lim); + + pr_info("%s: Setting shift to %d and lim to %d rcu_task_cb_adjust=%d rcu_task_cpu_ids=%d.\n", + rtp->name, data_race(rtp->percpu_enqueue_shift), data_race(rtp->percpu_enqueue_lim), + rcu_task_cb_adjust, rcu_task_cpu_ids); } // Compute wakeup time for lazy callback timer. @@ -348,7 +364,7 @@ static void call_rcu_tasks_generic(struct rcu_head *rhp, rcu_callback_t func, rtpcp->rtp_n_lock_retries = 0; } if (rcu_task_cb_adjust && ++rtpcp->rtp_n_lock_retries > rcu_task_contend_lim && - READ_ONCE(rtp->percpu_enqueue_lim) != nr_cpu_ids) + READ_ONCE(rtp->percpu_enqueue_lim) != rcu_task_cpu_ids) needadjust = true; // Defer adjustment to avoid deadlock. } // Queuing callbacks before initialization not yet supported. @@ -368,10 +384,10 @@ static void call_rcu_tasks_generic(struct rcu_head *rhp, rcu_callback_t func, raw_spin_unlock_irqrestore_rcu_node(rtpcp, flags); if (unlikely(needadjust)) { raw_spin_lock_irqsave(&rtp->cbs_gbl_lock, flags); - if (rtp->percpu_enqueue_lim != nr_cpu_ids) { + if (rtp->percpu_enqueue_lim != rcu_task_cpu_ids) { WRITE_ONCE(rtp->percpu_enqueue_shift, 0); - WRITE_ONCE(rtp->percpu_dequeue_lim, nr_cpu_ids); - smp_store_release(&rtp->percpu_enqueue_lim, nr_cpu_ids); + WRITE_ONCE(rtp->percpu_dequeue_lim, rcu_task_cpu_ids); + smp_store_release(&rtp->percpu_enqueue_lim, rcu_task_cpu_ids); pr_info("Switching %s to per-CPU callback queuing.\n", rtp->name); } raw_spin_unlock_irqrestore(&rtp->cbs_gbl_lock, flags); @@ -444,6 +460,8 @@ static int rcu_tasks_need_gpcb(struct rcu_tasks *rtp) dequeue_limit = smp_load_acquire(&rtp->percpu_dequeue_lim); for (cpu = 0; cpu < dequeue_limit; cpu++) { + if (!cpu_possible(cpu)) + continue; struct rcu_tasks_percpu *rtpcp = per_cpu_ptr(rtp->rtpcpu, cpu); /* Advance and accelerate any new callbacks. */ @@ -481,7 +499,7 @@ static int rcu_tasks_need_gpcb(struct rcu_tasks *rtp) if (rcu_task_cb_adjust && ncbs <= rcu_task_collapse_lim) { raw_spin_lock_irqsave(&rtp->cbs_gbl_lock, flags); if (rtp->percpu_enqueue_lim > 1) { - WRITE_ONCE(rtp->percpu_enqueue_shift, order_base_2(nr_cpu_ids)); + WRITE_ONCE(rtp->percpu_enqueue_shift, order_base_2(rcu_task_cpu_ids)); smp_store_release(&rtp->percpu_enqueue_lim, 1); rtp->percpu_dequeue_gpseq = get_state_synchronize_rcu(); gpdone = false; @@ -496,7 +514,9 @@ static int rcu_tasks_need_gpcb(struct rcu_tasks *rtp) pr_info("Completing switch %s to CPU-0 callback queuing.\n", rtp->name); } if (rtp->percpu_dequeue_lim == 1) { - for (cpu = rtp->percpu_dequeue_lim; cpu < nr_cpu_ids; cpu++) { + for (cpu = rtp->percpu_dequeue_lim; cpu < rcu_task_cpu_ids; cpu++) { + if (!cpu_possible(cpu)) + continue; struct rcu_tasks_percpu *rtpcp = per_cpu_ptr(rtp->rtpcpu, cpu); WARN_ON_ONCE(rcu_segcblist_n_cbs(&rtpcp->cblist)); @@ -511,30 +531,32 @@ static int rcu_tasks_need_gpcb(struct rcu_tasks *rtp) // Advance callbacks and invoke any that are ready. static void rcu_tasks_invoke_cbs(struct rcu_tasks *rtp, struct rcu_tasks_percpu *rtpcp) { - int cpu; - int cpunext; int cpuwq; unsigned long flags; int len; + int index; struct rcu_head *rhp; struct rcu_cblist rcl = RCU_CBLIST_INITIALIZER(rcl); struct rcu_tasks_percpu *rtpcp_next; - cpu = rtpcp->cpu; - cpunext = cpu * 2 + 1; - if (cpunext < smp_load_acquire(&rtp->percpu_dequeue_lim)) { - rtpcp_next = per_cpu_ptr(rtp->rtpcpu, cpunext); - cpuwq = rcu_cpu_beenfullyonline(cpunext) ? cpunext : WORK_CPU_UNBOUND; - queue_work_on(cpuwq, system_wq, &rtpcp_next->rtp_work); - cpunext++; - if (cpunext < smp_load_acquire(&rtp->percpu_dequeue_lim)) { - rtpcp_next = per_cpu_ptr(rtp->rtpcpu, cpunext); - cpuwq = rcu_cpu_beenfullyonline(cpunext) ? cpunext : WORK_CPU_UNBOUND; + index = rtpcp->index * 2 + 1; + if (index < num_possible_cpus()) { + rtpcp_next = rtp->rtpcp_array[index]; + if (rtpcp_next->cpu < smp_load_acquire(&rtp->percpu_dequeue_lim)) { + cpuwq = rcu_cpu_beenfullyonline(rtpcp_next->cpu) ? rtpcp_next->cpu : WORK_CPU_UNBOUND; queue_work_on(cpuwq, system_wq, &rtpcp_next->rtp_work); + index++; + if (index < num_possible_cpus()) { + rtpcp_next = rtp->rtpcp_array[index]; + if (rtpcp_next->cpu < smp_load_acquire(&rtp->percpu_dequeue_lim)) { + cpuwq = rcu_cpu_beenfullyonline(rtpcp_next->cpu) ? rtpcp_next->cpu : WORK_CPU_UNBOUND; + queue_work_on(cpuwq, system_wq, &rtpcp_next->rtp_work); + } + } } } - if (rcu_segcblist_empty(&rtpcp->cblist) || !cpu_possible(cpu)) + if (rcu_segcblist_empty(&rtpcp->cblist)) return; raw_spin_lock_irqsave_rcu_node(rtpcp, flags); rcu_segcblist_advance(&rtpcp->cblist, rcu_seq_current(&rtp->tasks_gp_seq));
For kernels built with CONFIG_FORCE_NR_CPUS=y, the nr_cpu_ids is defined as NR_CPUS instead of the number of possible cpus, this will cause the following system panic: [ 0.015349][ T0] smpboot: Allowing 4 CPUs, 0 hotplug CPUs ... [ 0.021342][ T0] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:512 nr_node_ids:1 ... [ 3.681252][ T15] BUG: unable to handle page fault for address: ffffffff9911c8c8 [ 3.689415][ T45] ehci-pci 0000:00:1a.0: debug port 2 [ 3.697008][ T15] #PF: supervisor read access in kernel mode [ 3.697009][ T15] #PF: error_code(0x0000) - not-present page [ 3.706233][ T45] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7e3c000 [ 3.708152][ T15] PGD 40fa24067 P4D 40fa24067 PUD 40fa25063 PMD 410bff063 [ 3.720380][ T45] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 3.720430][ T15] PTE 800ffffbefee3062 [ 3.720431][ T15] Oops: 0000 [#1] PREEMPT SMP PTI [ 3.727873][ T45] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06 [ 3.734009][ T15] CPU: 0 PID: 15 Comm: rcu_tasks_trace Tainted: G W 6.6.21 #1 5dc7acf91a5e8e9ac9dcfc35bee0245691283ea6 [ 3.734011][ T15] Hardware name: Dell Inc. OptiPlex 9020/005T15, BIOS A14 09/14/2015 [ 3.734012][ T15] RIP: 0010:rcu_tasks_need_gpcb+0x25d/0x2c0 [ 3.737962][ T45] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.742877][ T15] RSP: 0018:ffffa371c00a3e60 EFLAGS: 00010082 [ 3.751891][ T45] usb usb2: Product: EHCI Host Controller [ 3.764495][ T15] [ 3.764496][ T15] RAX: ffffffff98929ca0 RBX: ffffffff98b3b328 RCX: 0000000000021880 [ 3.764497][ T15] RDX: ffffffff9911c880 RSI: 0000000000000000 RDI: 0000000000000000 [ 3.772461][ T45] usb usb2: Manufacturer: Linux 6.6.21 ehci_hcd [ 3.778248][ T15] RBP: 0000000000000202 R08: 0000000000000000 R09: 0000000000000000 [ 3.778249][ T15] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000003 [ 3.778249][ T15] R13: 0000000000000000 R14: 0000000000000001 R15: ffffffff98b3b320 [ 3.786216][ T45] usb usb2: SerialNumber: 0000:00:1a.0 [ 3.805811][ T15] FS: 0000000000000000(0000) GS:ffff8c781ea00000(0000) knlGS:0000000000000000 [ 3.805813][ T15] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3.811993][ T45] hub 2-0:1.0: USB hub found [ 3.817383][ T15] CR2: ffffffff9911c8c8 CR3: 000000040fa20005 CR4: 00000000001706f0 [ 3.817385][ T15] Call Trace: [ 3.817386][ T15] <TASK> [ 3.817388][ T15] ? __die+0x23/0x80 [ 3.819643][ T45] hub 2-0:1.0: 2 ports detected [ 3.827481][ T15] ? page_fault_oops+0xa4/0x180 [ 3.827485][ T15] ? exc_page_fault+0x152/0x180 [ 3.922376][ T15] ? asm_exc_page_fault+0x26/0x40 [ 3.927289][ T15] ? rcu_tasks_need_gpcb+0x25d/0x2c0 [ 3.932459][ T15] ? __pfx_rcu_tasks_kthread+0x40/0x40 [ 3.937806][ T15] rcu_tasks_one_gp+0x69/0x180 [ 3.942451][ T15] rcu_tasks_kthread+0x94/0xc0 [ 3.947096][ T15] kthread+0xe8/0x140 [ 3.950956][ T15] ? __pfx_kthread+0x40/0x40 [ 3.955425][ T15] ret_from_fork+0x34/0x80 [ 3.959721][ T15] ? __pfx_kthread+0x40/0x40 [ 3.964192][ T15] ret_from_fork_asm+0x1b/0x80 [ 3.968841][ T15] </TASK> Consider that there may be holes in the CPU numbers, this commit use the maxcpu variable to store the CPU numbers after traversing possible cpu, and generate the rcu_task_cpu_ids variable and assign it to (maxcpu +1) instead of nr_cpu_ids. Closes: https://lore.kernel.org/linux-input/CALMA0xaTSMN+p4xUXkzrtR5r6k7hgoswcaXx7baR_z9r5jjskw@mail.gmail.com/T/#u Reported-by: Zhixu Liu <zhixu.liu@gmail.com> Signed-off-by: Zqiang <qiang.zhang1211@gmail.com> --- kernel/rcu/tasks.h | 80 +++++++++++++++++++++++++++++----------------- 1 file changed, 51 insertions(+), 29 deletions(-)