Message ID | 20240709160656.31146-12-quic_depengs@quicinc.com (mailing list archive) |
---|---|
State | New |
Headers | show |
Series | media: qcom: camss: Add sm8550 support | expand |
On 09/07/2024 17:06, Depeng Shao wrote: > The main v4l2 process logic in camss vfe subdev driver, so the vfe driver > handles the buf done irq and register update configuration. But the buf > done irq and register update configuration have been moved CSID HW in > Titan 780 and other new platform, so vfe driver needs to call into CSID > driver to configure the register update. And CSID driver also needs to > call into vfe driver to notify of the buf done irq. > > Adding this notify interface in camss structure to do the subdevs cross > communication to decouple CSID and VFE, the subdevs can add an interface > to process the message what is routed from other subdevices, then we can > process the cross communication easily. > > Signed-off-by: Depeng Shao <quic_depengs@quicinc.com> > --- > .../platform/qcom/camss/camss-csid-gen3.c | 38 +++++++++++++++ > .../media/platform/qcom/camss/camss-csid.h | 8 ++++ > .../media/platform/qcom/camss/camss-vfe-780.c | 29 +++++++++++- > drivers/media/platform/qcom/camss/camss-vfe.h | 1 + > drivers/media/platform/qcom/camss/camss.c | 47 +++++++++++++++++++ > drivers/media/platform/qcom/camss/camss.h | 9 ++++ > 6 files changed, 130 insertions(+), 2 deletions(-) > > diff --git a/drivers/media/platform/qcom/camss/camss-csid-gen3.c b/drivers/media/platform/qcom/camss/camss-csid-gen3.c > index 17fd7c5499de..585054948255 100644 > --- a/drivers/media/platform/qcom/camss/camss-csid-gen3.c > +++ b/drivers/media/platform/qcom/camss/camss-csid-gen3.c > @@ -312,6 +312,18 @@ static u32 csid_hw_version(struct csid_device *csid) > return hw_version; > } > > +static void csid_reg_update(struct csid_device *csid, int port_id) > +{ > + csid->reg_update |= REG_UPDATE_RDI(csid, port_id); > + writel_relaxed(csid->reg_update, csid->base + CSID_REG_UPDATE_CMD); > +} > + > +static inline void csid_reg_update_clear(struct csid_device *csid, > + int port_id) > +{ > + csid->reg_update &= ~REG_UPDATE_RDI(csid, port_id); > +} > + > /* > * csid_isr - CSID module interrupt service routine > * @irq: Interrupt line > @@ -341,6 +353,14 @@ static irqreturn_t csid_isr(int irq, void *dev) > if (csid->phy.en_vc & BIT(i)) { > val = readl_relaxed(csid->base + CSID_CSI2_RDIN_IRQ_STATUS(i)); > writel_relaxed(val, csid->base + CSID_CSI2_RDIN_IRQ_CLEAR(i)); > + > + if (buf_done_val & BIT(BUF_DONE_IRQ_STATUS_RDI_OFFSET + i)) { > + /* For Titan 780, Buf Done IRQ® has been moved to CSID from VFE. > + * Once CSID received Buf Done, need notify this event to VFE. > + * Trigger VFE to handle Buf Done process. > + */ > + csid->camss->notify(&csid->subdev, CAMSS_MSG_BUF_DONE, (void *)&i); Instead of a generic notify function with an enum passed to a switch lets just have a dedicated function for each functional callback. csid->camss->reg_update_cmd(); csid->camss->reg_clear_cmd(); We can get rid of a switch and an additional enum that way, plus redundant "event not supported" error checking. > + } > } > > val = 1 << IRQ_CMD_CLEAR; > @@ -434,6 +454,23 @@ static void csid_subdev_init(struct csid_device *csid) > csid->testgen.nmodes = CSID_PAYLOAD_MODE_NUM_SUPPORTED_GEN2; > } > > +static void csid_subdev_process_msg(struct csid_device *csid, unsigned int msg_type, void *arg) > +{ > + int msg_data = *(int *)arg; > + > + switch (msg_type) { > + case CAMSS_MSG_RUP: > + csid_reg_update(csid, msg_data); > + break; > + case CAMSS_MSG_RUP_CLEAR: > + csid_reg_update_clear(csid, msg_data); > + break; > + default: > + dev_err(csid->camss->dev, "NOT Supported EVT Type\n"); > + break; > + } > +} > + > const struct csid_hw_ops csid_ops_gen3 = { > .configure_stream = csid_configure_stream, > .configure_testgen_pattern = csid_configure_testgen_pattern, > @@ -442,4 +479,5 @@ const struct csid_hw_ops csid_ops_gen3 = { > .reset = csid_reset, > .src_pad_code = csid_src_pad_code, > .subdev_init = csid_subdev_init, > + .process_msg = csid_subdev_process_msg, > }; > diff --git a/drivers/media/platform/qcom/camss/camss-csid.h b/drivers/media/platform/qcom/camss/camss-csid.h > index ae5b6b0dc0ea..714a8db855fd 100644 > --- a/drivers/media/platform/qcom/camss/camss-csid.h > +++ b/drivers/media/platform/qcom/camss/camss-csid.h > @@ -152,6 +152,14 @@ struct csid_hw_ops { > * @csid: CSID device > */ > void (*subdev_init)(struct csid_device *csid); > + > + /* > + * process_msg - receive message from other sub device > + * @csid: CSID device > + * @evt_type: event type > + * @arg: arguments > + */ > + void (*process_msg)(struct csid_device *csid, unsigned int evt_type, void *arg); > }; > > struct csid_subdev_resources { > diff --git a/drivers/media/platform/qcom/camss/camss-vfe-780.c b/drivers/media/platform/qcom/camss/camss-vfe-780.c > index abef2d5b9c2e..3279fe53b987 100644 > --- a/drivers/media/platform/qcom/camss/camss-vfe-780.c > +++ b/drivers/media/platform/qcom/camss/camss-vfe-780.c > @@ -131,13 +131,23 @@ static void vfe_wm_update(struct vfe_device *vfe, u8 wm, u64 addr, > > static void vfe_reg_update(struct vfe_device *vfe, enum vfe_line_id line_id) > { > - /* TODO: Add register update support */ > + int port_id = line_id; > + > + /* RUP(register update) registers has beem moved to CSID in Titan 780. > + * Notify the event of trigger RUP. > + */ > + vfe->camss->notify(&vfe->line[line_id].subdev, CAMSS_MSG_RUP, (void *)&port_id); > } > > static inline void vfe_reg_update_clear(struct vfe_device *vfe, > enum vfe_line_id line_id) > { > - /* TODO: Add register update clear support */ > + int port_id = line_id; > + > + /* RUP(register update) registers has beem moved to CSID in Titan 780. > + * Notify the event of trigger RUP clear. > + */ > + vfe->camss->notify(&vfe->line[line_id].subdev, CAMSS_MSG_RUP_CLEAR, (void *)&port_id); > } > > /* > @@ -390,6 +400,20 @@ static void vfe_subdev_init(struct device *dev, struct vfe_device *vfe) > vfe->video_ops = vfe_video_ops_780; > } > > +static void vfe_subdev_process_msg(struct vfe_device *vfe, unsigned int msg_type, void *arg) > +{ > + int port_id = *(int *)arg; > + > + switch (msg_type) { > + case CAMSS_MSG_BUF_DONE: > + vfe_buf_done(vfe, port_id); > + break; > + > + default: > + break; > + } > +} > + > const struct vfe_hw_ops vfe_ops_780 = { > .global_reset = NULL, > .hw_version = vfe_hw_version, > @@ -401,4 +425,5 @@ const struct vfe_hw_ops vfe_ops_780 = { > .vfe_enable = vfe_enable, > .vfe_halt = vfe_halt, > .vfe_wm_stop = vfe_wm_stop, > + .process_msg = vfe_subdev_process_msg, > }; > diff --git a/drivers/media/platform/qcom/camss/camss-vfe.h b/drivers/media/platform/qcom/camss/camss-vfe.h > index 10e2cc3c0b83..a8b09ce9941b 100644 > --- a/drivers/media/platform/qcom/camss/camss-vfe.h > +++ b/drivers/media/platform/qcom/camss/camss-vfe.h > @@ -115,6 +115,7 @@ struct vfe_hw_ops { > int (*vfe_halt)(struct vfe_device *vfe); > void (*violation_read)(struct vfe_device *vfe); > void (*vfe_wm_stop)(struct vfe_device *vfe, u8 wm); > + void (*process_msg)(struct vfe_device *vfe, unsigned int msg_type, void *arg); > }; > > struct vfe_isr_ops { > diff --git a/drivers/media/platform/qcom/camss/camss.c b/drivers/media/platform/qcom/camss/camss.c > index 1f1f44f6fbb2..abeb0918e47d 100644 > --- a/drivers/media/platform/qcom/camss/camss.c > +++ b/drivers/media/platform/qcom/camss/camss.c > @@ -2202,6 +2202,52 @@ static void camss_genpd_cleanup(struct camss *camss) > dev_pm_domain_detach(camss->genpd, true); > } > > +static void camss_notify_msg(struct v4l2_subdev *sd, > + unsigned int msg_type, void *arg) > +{ > + struct v4l2_device *v4l2_dev = sd->v4l2_dev; > + struct camss *camss = to_camss(v4l2_dev); > + struct vfe_device *vfe; > + struct vfe_line *vfe_line; > + struct csid_device *csid; > + int evt_data = *(int *)arg; > + > + switch (msg_type) { > + case CAMSS_MSG_BUF_DONE: > + csid = v4l2_get_subdevdata(sd); > + vfe = &(camss->vfe[csid->id]); > + if (vfe->res->hw_ops->process_msg) > + vfe->res->hw_ops->process_msg(vfe, > + CAMSS_MSG_BUF_DONE, (void *)&evt_data); > + break; > + > + case CAMSS_MSG_RUP: > + vfe_line = v4l2_get_subdevdata(sd); > + vfe = to_vfe(vfe_line); > + csid = &(camss->csid[vfe->id]); > + > + if (csid->res->hw_ops->process_msg) > + csid->res->hw_ops->process_msg(csid, > + CAMSS_MSG_RUP, (void *)&evt_data); > + break; > + > + case CAMSS_MSG_RUP_CLEAR: > + vfe_line = v4l2_get_subdevdata(sd); > + vfe = to_vfe(vfe_line); > + csid = &(camss->csid[vfe->id]); > + > + if (csid->res->hw_ops->process_msg) > + csid->res->hw_ops->process_msg(csid, > + CAMSS_MSG_RUP_CLEAR, (void *)&evt_data); > + > + break; > + > + default: > + dev_err(camss->dev, "Not supported evt type\n"); > + break; > + } > +} Instead of having a central swiss army knife notify() callback these should be CSID or VFE specific callbacks vfe->buf_done() csid->msg_rup() etc. --- bod
Hi Bryan, On 7/10/2024 7:54 PM, Bryan O'Donoghue wrote: > On 09/07/2024 17:06, Depeng Shao wrote: >> The main v4l2 process logic in camss vfe subdev driver, so the vfe driver >> handles the buf done irq and register update configuration. But the buf >> done irq and register update configuration have been moved CSID HW in >> Titan 780 and other new platform, so vfe driver needs to call into CSID >> driver to configure the register update. And CSID driver also needs to >> call into vfe driver to notify of the buf done irq. >> >> Adding this notify interface in camss structure to do the subdevs cross >> /* >> * csid_isr - CSID module interrupt service routine >> * @irq: Interrupt line >> @@ -341,6 +353,14 @@ static irqreturn_t csid_isr(int irq, void *dev) >> if (csid->phy.en_vc & BIT(i)) { >> val = readl_relaxed(csid->base + >> CSID_CSI2_RDIN_IRQ_STATUS(i)); >> writel_relaxed(val, csid->base + >> CSID_CSI2_RDIN_IRQ_CLEAR(i)); >> + >> + if (buf_done_val & BIT(BUF_DONE_IRQ_STATUS_RDI_OFFSET + >> i)) { >> + /* For Titan 780, Buf Done IRQ® has been moved to >> CSID from VFE. >> + * Once CSID received Buf Done, need notify this >> event to VFE. >> + * Trigger VFE to handle Buf Done process. >> + */ >> + csid->camss->notify(&csid->subdev, >> CAMSS_MSG_BUF_DONE, (void *)&i); > > Instead of a generic notify function with an enum passed to a switch > lets just have a dedicated function for each functional callback. > > csid->camss->reg_update_cmd(); > csid->camss->reg_clear_cmd(); > > We can get rid of a switch and an additional enum that way, plus > redundant "event not supported" error checking. > Sure, will update the code based on suggestion. >> + } >> } >> val = 1 << IRQ_CMD_CLEAR; >> @@ -434,6 +454,23 @@ static void csid_subdev_init(struct csid_device >> *csid) >> csid->testgen.nmodes = CSID_PAYLOAD_MODE_NUM_SUPPORTED_GEN2; >> } >> +static void csid_subdev_process_msg(struct csid_device *csid, >> unsigned int msg_type, void *arg) >> +{ >> + int msg_data = *(int *)arg; >> + >> + switch (msg_type) { >> + case CAMSS_MSG_RUP: >> + csid_reg_update(csid, msg_data); >> + break; >> + case CAMSS_MSG_RUP_CLEAR: >> + csid_reg_update_clear(csid, msg_data); >> + break; >> + default: >> + dev_err(csid->camss->dev, "NOT Supported EVT Type\n"); >> + break; >> + } >> +} >> + >> const struct csid_hw_ops csid_ops_gen3 = { >> .configure_stream = csid_configure_stream, >> .configure_testgen_pattern = csid_configure_testgen_pattern, >> @@ -442,4 +479,5 @@ const struct csid_hw_ops csid_ops_gen3 = { >> .reset = csid_reset, >> .src_pad_code = csid_src_pad_code, >> .subdev_init = csid_subdev_init, >> + .process_msg = csid_subdev_process_msg, >> diff --git a/drivers/media/platform/qcom/camss/camss-vfe.h >> b/drivers/media/platform/qcom/camss/camss-vfe.h >> index 10e2cc3c0b83..a8b09ce9941b 100644 >> --- a/drivers/media/platform/qcom/camss/camss-vfe.h >> +++ b/drivers/media/platform/qcom/camss/camss-vfe.h >> @@ -115,6 +115,7 @@ struct vfe_hw_ops { >> int (*vfe_halt)(struct vfe_device *vfe); >> void (*violation_read)(struct vfe_device *vfe); >> void (*vfe_wm_stop)(struct vfe_device *vfe, u8 wm); >> + void (*process_msg)(struct vfe_device *vfe, unsigned int >> msg_type, void *arg); >> }; >> struct vfe_isr_ops { >> diff --git a/drivers/media/platform/qcom/camss/camss.c >> b/drivers/media/platform/qcom/camss/camss.c >> index 1f1f44f6fbb2..abeb0918e47d 100644 >> --- a/drivers/media/platform/qcom/camss/camss.c >> +++ b/drivers/media/platform/qcom/camss/camss.c >> @@ -2202,6 +2202,52 @@ static void camss_genpd_cleanup(struct camss >> *camss) >> dev_pm_domain_detach(camss->genpd, true); >> } >> +static void camss_notify_msg(struct v4l2_subdev *sd, >> + unsigned int msg_type, void *arg) >> +{ >> + struct v4l2_device *v4l2_dev = sd->v4l2_dev; >> + struct camss *camss = to_camss(v4l2_dev); >> + struct vfe_device *vfe; >> + struct vfe_line *vfe_line; >> + struct csid_device *csid; >> + int evt_data = *(int *)arg; >> + >> + switch (msg_type) { >> + case CAMSS_MSG_BUF_DONE: >> + csid = v4l2_get_subdevdata(sd); >> + vfe = &(camss->vfe[csid->id]); >> + if (vfe->res->hw_ops->process_msg) >> + vfe->res->hw_ops->process_msg(vfe, >> + CAMSS_MSG_BUF_DONE, (void *)&evt_data); >> + break; >> + >> + case CAMSS_MSG_RUP: >> + vfe_line = v4l2_get_subdevdata(sd); >> + vfe = to_vfe(vfe_line); >> + csid = &(camss->csid[vfe->id]); >> + >> + if (csid->res->hw_ops->process_msg) >> + csid->res->hw_ops->process_msg(csid, >> + CAMSS_MSG_RUP, (void *)&evt_data); >> + break; >> + >> + case CAMSS_MSG_RUP_CLEAR: >> + vfe_line = v4l2_get_subdevdata(sd); >> + vfe = to_vfe(vfe_line); >> + csid = &(camss->csid[vfe->id]); >> + >> + if (csid->res->hw_ops->process_msg) >> + csid->res->hw_ops->process_msg(csid, >> + CAMSS_MSG_RUP_CLEAR, (void *)&evt_data); >> + >> + break; >> + >> + default: >> + dev_err(camss->dev, "Not supported evt type\n"); >> + break; >> + } >> +} > > Instead of having a central swiss army knife notify() callback these > should be CSID or VFE specific callbacks vfe->buf_done() csid->msg_rup() > etc. > I will try to add the callback in CSID and VFE driver. Thanks, Depeng
diff --git a/drivers/media/platform/qcom/camss/camss-csid-gen3.c b/drivers/media/platform/qcom/camss/camss-csid-gen3.c index 17fd7c5499de..585054948255 100644 --- a/drivers/media/platform/qcom/camss/camss-csid-gen3.c +++ b/drivers/media/platform/qcom/camss/camss-csid-gen3.c @@ -312,6 +312,18 @@ static u32 csid_hw_version(struct csid_device *csid) return hw_version; } +static void csid_reg_update(struct csid_device *csid, int port_id) +{ + csid->reg_update |= REG_UPDATE_RDI(csid, port_id); + writel_relaxed(csid->reg_update, csid->base + CSID_REG_UPDATE_CMD); +} + +static inline void csid_reg_update_clear(struct csid_device *csid, + int port_id) +{ + csid->reg_update &= ~REG_UPDATE_RDI(csid, port_id); +} + /* * csid_isr - CSID module interrupt service routine * @irq: Interrupt line @@ -341,6 +353,14 @@ static irqreturn_t csid_isr(int irq, void *dev) if (csid->phy.en_vc & BIT(i)) { val = readl_relaxed(csid->base + CSID_CSI2_RDIN_IRQ_STATUS(i)); writel_relaxed(val, csid->base + CSID_CSI2_RDIN_IRQ_CLEAR(i)); + + if (buf_done_val & BIT(BUF_DONE_IRQ_STATUS_RDI_OFFSET + i)) { + /* For Titan 780, Buf Done IRQ® has been moved to CSID from VFE. + * Once CSID received Buf Done, need notify this event to VFE. + * Trigger VFE to handle Buf Done process. + */ + csid->camss->notify(&csid->subdev, CAMSS_MSG_BUF_DONE, (void *)&i); + } } val = 1 << IRQ_CMD_CLEAR; @@ -434,6 +454,23 @@ static void csid_subdev_init(struct csid_device *csid) csid->testgen.nmodes = CSID_PAYLOAD_MODE_NUM_SUPPORTED_GEN2; } +static void csid_subdev_process_msg(struct csid_device *csid, unsigned int msg_type, void *arg) +{ + int msg_data = *(int *)arg; + + switch (msg_type) { + case CAMSS_MSG_RUP: + csid_reg_update(csid, msg_data); + break; + case CAMSS_MSG_RUP_CLEAR: + csid_reg_update_clear(csid, msg_data); + break; + default: + dev_err(csid->camss->dev, "NOT Supported EVT Type\n"); + break; + } +} + const struct csid_hw_ops csid_ops_gen3 = { .configure_stream = csid_configure_stream, .configure_testgen_pattern = csid_configure_testgen_pattern, @@ -442,4 +479,5 @@ const struct csid_hw_ops csid_ops_gen3 = { .reset = csid_reset, .src_pad_code = csid_src_pad_code, .subdev_init = csid_subdev_init, + .process_msg = csid_subdev_process_msg, }; diff --git a/drivers/media/platform/qcom/camss/camss-csid.h b/drivers/media/platform/qcom/camss/camss-csid.h index ae5b6b0dc0ea..714a8db855fd 100644 --- a/drivers/media/platform/qcom/camss/camss-csid.h +++ b/drivers/media/platform/qcom/camss/camss-csid.h @@ -152,6 +152,14 @@ struct csid_hw_ops { * @csid: CSID device */ void (*subdev_init)(struct csid_device *csid); + + /* + * process_msg - receive message from other sub device + * @csid: CSID device + * @evt_type: event type + * @arg: arguments + */ + void (*process_msg)(struct csid_device *csid, unsigned int evt_type, void *arg); }; struct csid_subdev_resources { diff --git a/drivers/media/platform/qcom/camss/camss-vfe-780.c b/drivers/media/platform/qcom/camss/camss-vfe-780.c index abef2d5b9c2e..3279fe53b987 100644 --- a/drivers/media/platform/qcom/camss/camss-vfe-780.c +++ b/drivers/media/platform/qcom/camss/camss-vfe-780.c @@ -131,13 +131,23 @@ static void vfe_wm_update(struct vfe_device *vfe, u8 wm, u64 addr, static void vfe_reg_update(struct vfe_device *vfe, enum vfe_line_id line_id) { - /* TODO: Add register update support */ + int port_id = line_id; + + /* RUP(register update) registers has beem moved to CSID in Titan 780. + * Notify the event of trigger RUP. + */ + vfe->camss->notify(&vfe->line[line_id].subdev, CAMSS_MSG_RUP, (void *)&port_id); } static inline void vfe_reg_update_clear(struct vfe_device *vfe, enum vfe_line_id line_id) { - /* TODO: Add register update clear support */ + int port_id = line_id; + + /* RUP(register update) registers has beem moved to CSID in Titan 780. + * Notify the event of trigger RUP clear. + */ + vfe->camss->notify(&vfe->line[line_id].subdev, CAMSS_MSG_RUP_CLEAR, (void *)&port_id); } /* @@ -390,6 +400,20 @@ static void vfe_subdev_init(struct device *dev, struct vfe_device *vfe) vfe->video_ops = vfe_video_ops_780; } +static void vfe_subdev_process_msg(struct vfe_device *vfe, unsigned int msg_type, void *arg) +{ + int port_id = *(int *)arg; + + switch (msg_type) { + case CAMSS_MSG_BUF_DONE: + vfe_buf_done(vfe, port_id); + break; + + default: + break; + } +} + const struct vfe_hw_ops vfe_ops_780 = { .global_reset = NULL, .hw_version = vfe_hw_version, @@ -401,4 +425,5 @@ const struct vfe_hw_ops vfe_ops_780 = { .vfe_enable = vfe_enable, .vfe_halt = vfe_halt, .vfe_wm_stop = vfe_wm_stop, + .process_msg = vfe_subdev_process_msg, }; diff --git a/drivers/media/platform/qcom/camss/camss-vfe.h b/drivers/media/platform/qcom/camss/camss-vfe.h index 10e2cc3c0b83..a8b09ce9941b 100644 --- a/drivers/media/platform/qcom/camss/camss-vfe.h +++ b/drivers/media/platform/qcom/camss/camss-vfe.h @@ -115,6 +115,7 @@ struct vfe_hw_ops { int (*vfe_halt)(struct vfe_device *vfe); void (*violation_read)(struct vfe_device *vfe); void (*vfe_wm_stop)(struct vfe_device *vfe, u8 wm); + void (*process_msg)(struct vfe_device *vfe, unsigned int msg_type, void *arg); }; struct vfe_isr_ops { diff --git a/drivers/media/platform/qcom/camss/camss.c b/drivers/media/platform/qcom/camss/camss.c index 1f1f44f6fbb2..abeb0918e47d 100644 --- a/drivers/media/platform/qcom/camss/camss.c +++ b/drivers/media/platform/qcom/camss/camss.c @@ -2202,6 +2202,52 @@ static void camss_genpd_cleanup(struct camss *camss) dev_pm_domain_detach(camss->genpd, true); } +static void camss_notify_msg(struct v4l2_subdev *sd, + unsigned int msg_type, void *arg) +{ + struct v4l2_device *v4l2_dev = sd->v4l2_dev; + struct camss *camss = to_camss(v4l2_dev); + struct vfe_device *vfe; + struct vfe_line *vfe_line; + struct csid_device *csid; + int evt_data = *(int *)arg; + + switch (msg_type) { + case CAMSS_MSG_BUF_DONE: + csid = v4l2_get_subdevdata(sd); + vfe = &(camss->vfe[csid->id]); + if (vfe->res->hw_ops->process_msg) + vfe->res->hw_ops->process_msg(vfe, + CAMSS_MSG_BUF_DONE, (void *)&evt_data); + break; + + case CAMSS_MSG_RUP: + vfe_line = v4l2_get_subdevdata(sd); + vfe = to_vfe(vfe_line); + csid = &(camss->csid[vfe->id]); + + if (csid->res->hw_ops->process_msg) + csid->res->hw_ops->process_msg(csid, + CAMSS_MSG_RUP, (void *)&evt_data); + break; + + case CAMSS_MSG_RUP_CLEAR: + vfe_line = v4l2_get_subdevdata(sd); + vfe = to_vfe(vfe_line); + csid = &(camss->csid[vfe->id]); + + if (csid->res->hw_ops->process_msg) + csid->res->hw_ops->process_msg(csid, + CAMSS_MSG_RUP_CLEAR, (void *)&evt_data); + + break; + + default: + dev_err(camss->dev, "Not supported evt type\n"); + break; + } +} + /* * camss_probe - Probe CAMSS platform device * @pdev: Pointer to CAMSS platform device @@ -2272,6 +2318,7 @@ static int camss_probe(struct platform_device *pdev) media_device_init(&camss->media_dev); camss->v4l2_dev.mdev = &camss->media_dev; + camss->notify = camss_notify_msg; ret = v4l2_device_register(camss->dev, &camss->v4l2_dev); if (ret < 0) { dev_err(dev, "Failed to register V4L2 device: %d\n", ret); diff --git a/drivers/media/platform/qcom/camss/camss.h b/drivers/media/platform/qcom/camss/camss.h index 73c47c07fc30..65fcebd42c4b 100644 --- a/drivers/media/platform/qcom/camss/camss.h +++ b/drivers/media/platform/qcom/camss/camss.h @@ -86,6 +86,13 @@ enum icc_count { ICC_SM8250_COUNT = 4, }; +enum camss_notify_message { + CAMSS_MSG_BUF_DONE = 0, + CAMSS_MSG_RUP, + CAMSS_MSG_RUP_CLEAR, + CAMSS_MSG_MAX, +}; + struct camss_resources { enum camss_version version; const char *pd_name; @@ -116,6 +123,8 @@ struct camss { struct device_link *genpd_link; struct icc_path *icc_path[ICC_SM8250_COUNT]; const struct camss_resources *res; + void (*notify)(struct v4l2_subdev *sd, + unsigned int notification, void *arg); }; struct camss_camera_interface {
The main v4l2 process logic in camss vfe subdev driver, so the vfe driver handles the buf done irq and register update configuration. But the buf done irq and register update configuration have been moved CSID HW in Titan 780 and other new platform, so vfe driver needs to call into CSID driver to configure the register update. And CSID driver also needs to call into vfe driver to notify of the buf done irq. Adding this notify interface in camss structure to do the subdevs cross communication to decouple CSID and VFE, the subdevs can add an interface to process the message what is routed from other subdevices, then we can process the cross communication easily. Signed-off-by: Depeng Shao <quic_depengs@quicinc.com> --- .../platform/qcom/camss/camss-csid-gen3.c | 38 +++++++++++++++ .../media/platform/qcom/camss/camss-csid.h | 8 ++++ .../media/platform/qcom/camss/camss-vfe-780.c | 29 +++++++++++- drivers/media/platform/qcom/camss/camss-vfe.h | 1 + drivers/media/platform/qcom/camss/camss.c | 47 +++++++++++++++++++ drivers/media/platform/qcom/camss/camss.h | 9 ++++ 6 files changed, 130 insertions(+), 2 deletions(-)