diff mbox series

[1/3] dt-bindings: usb: Add fsl,ls-dwc3.yaml for layerscape usb3 glue layer

Message ID 20240710-ls-dwc-v1-1-62f8cbed31d7@nxp.com (mailing list archive)
State Rejected
Headers show
Series usb: dwc3: add fsl,ls-dwc3 glue layer support | expand

Commit Message

Frank Li July 10, 2024, 11:02 p.m. UTC
Add fsl,ls-dwc3.yaml for layerscape usb3 glue layer.

Layerscape supports DMA coherent bus fabric. It needs to pass down a
software-managed property to the DWC3 core.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
 .../devicetree/bindings/usb/fsl,ls-dwc3.yaml       | 50 ++++++++++++++++++++++
 1 file changed, 50 insertions(+)

Comments

Krzysztof Kozlowski July 12, 2024, 9:24 a.m. UTC | #1
On 11/07/2024 01:02, Frank Li wrote:
> Add fsl,ls-dwc3.yaml for layerscape usb3 glue layer.
> 
> Layerscape supports DMA coherent bus fabric. It needs to pass down a
> software-managed property to the DWC3 core.
> 
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
> ---
>  .../devicetree/bindings/usb/fsl,ls-dwc3.yaml       | 50 ++++++++++++++++++++++
>  1 file changed, 50 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/usb/fsl,ls-dwc3.yaml b/Documentation/devicetree/bindings/usb/fsl,ls-dwc3.yaml
> new file mode 100644
> index 0000000000000..e79416122d12b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/fsl,ls-dwc3.yaml
> @@ -0,0 +1,50 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/usb/fsl,ls-dwc3.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Freescale layerscape DWC3 USB controller
> +
> +maintainers:
> +  - Frank Li <Frank.Li@nxp.com>
> +
> +properties:
> +  compatible:
> +    const: fsl,ls1028a-dwc3

Responding also here, so Greg won't pick it up: as Rob explained,
without reg this is an useless placeholder/wrapper, so instead go
without the wrapper node.

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/usb/fsl,ls-dwc3.yaml b/Documentation/devicetree/bindings/usb/fsl,ls-dwc3.yaml
new file mode 100644
index 0000000000000..e79416122d12b
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/fsl,ls-dwc3.yaml
@@ -0,0 +1,50 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/fsl,ls-dwc3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale layerscape DWC3 USB controller
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,ls1028a-dwc3
+
+  ranges: true
+
+  '#address-cells':
+    enum: [ 1, 2 ]
+
+  '#size-cells':
+    enum: [ 1, 2 ]
+
+# Required child node:
+
+patternProperties:
+  "^usb@[0-9a-f]+$":
+    $ref: snps,dwc3.yaml#
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    usb {
+        compatible = "fsl,ls1028a-dwc3";
+        ranges;
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        usb@31000000 {
+             compatible = "snps,dwc3";
+             reg = <0x31000000 0x10000>;
+             interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+             dr_mode = "peripheral";
+        };
+    };