Message ID | 20240712-mbg-tm-support-v1-2-7d78bec920ca@quicinc.com (mailing list archive) |
---|---|
State | Not Applicable |
Headers | show |
Series | Add support for MBG Thermal monitoring device | expand |
On Fri, 12 Jul 2024 18:13:29 +0530, Satya Priya Kakitapalli wrote: > Add bindings support for the MBG Temp alarm peripheral found on > pm8775 pmics. > > Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com> > --- > .../bindings/thermal/qcom-spmi-mbg-tm.yaml | 63 ++++++++++++++++++++++ > 1 file changed, 63 insertions(+) > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: In file included from Documentation/devicetree/bindings/thermal/qcom-spmi-mbg-tm.example.dts:25: ./scripts/dtc/include-prefixes/dt-bindings/iio/adc/qcom,spmi-adc5-gen3-pm8775.h:9:10: fatal error: dt-bindings/iio/adc/qcom,spmi-vadc.h: No such file or directory 9 | #include <dt-bindings/iio/adc/qcom,spmi-vadc.h> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ compilation terminated. make[2]: *** [scripts/Makefile.lib:427: Documentation/devicetree/bindings/thermal/qcom-spmi-mbg-tm.example.dtb] Error 1 make[2]: *** Waiting for unfinished jobs.... make[1]: *** [/builds/robherring/dt-review-ci/linux/Makefile:1430: dt_binding_check] Error 2 make: *** [Makefile:240: __sub-make] Error 2 doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240712-mbg-tm-support-v1-2-7d78bec920ca@quicinc.com The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
On 12/07/2024 14:43, Satya Priya Kakitapalli wrote: > Add bindings support for the MBG Temp alarm peripheral found on > pm8775 pmics. > > Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com> > --- > .../bindings/thermal/qcom-spmi-mbg-tm.yaml | 63 ++++++++++++++++++++++ A nit, subject: drop second/last, redundant "bindings". The "dt-bindings" prefix is already stating that these are bindings. See also: https://elixir.bootlin.com/linux/v6.7-rc8/source/Documentation/devicetree/bindings/submitting-patches.rst#L18 > 1 file changed, 63 insertions(+) > > diff --git a/Documentation/devicetree/bindings/thermal/qcom-spmi-mbg-tm.yaml b/Documentation/devicetree/bindings/thermal/qcom-spmi-mbg-tm.yaml > new file mode 100644 > index 000000000000..9b6d1bc34a11 > --- /dev/null > +++ b/Documentation/devicetree/bindings/thermal/qcom-spmi-mbg-tm.yaml > @@ -0,0 +1,63 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/thermal/qcom-spmi-mbg-tm.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Qualcomm Technologies, Inc. SPMI PMIC MBG Thermal Monitoring > + > +maintainers: > + - Satya Priya Kakitapalli <quic_skakitap@quicinc.com> > + > +description: | Do not need '|' unless you need to preserve formatting. > + Qualcomm's thermal driver for the MBG thermal monitoring device. Driver as Linux driver? Instead please describe the hardware. Missing $ref to thermal-sensor. > + > +properties: > + compatible: > + const: qcom,spmi-mbg-tm Instead use SoC specific compatible. > + > + reg: > + maxItems: 1 > + > + interrupts: > + maxItems: 1 > + > + io-channels: Missing constraints. Use items with description. > + description: > + IIO channel specifier for the ADC channel, which reports And drop redundant part - "IIO channel specifier for". This cannot be anything else. > + chip die temperature. > + > + io-channel-names: > + const: thermal > + > + "#thermal-sensor-cells": > + const: 0 > + > +required: > + - compatible > + - reg > + - interrupts > + - io-channels > + - io-channel-names > + - "#thermal-sensor-cells" And this won't be needed. > + > +additionalProperties: false unevaluatedProperties instead > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/irq.h> > + #include <dt-bindings/iio/adc/qcom,spmi-adc5-gen3-pm8775.h> > + spmi_bus { Eh... No. Is this really directly on SPMI bus? Anyway, use correct node names. > + #address-cells = <1>; > + #size-cells = <0>; > + > + pm8775_sail_1_tz: qcom,mbg-tm@d700 { Oh no, please don't bring downstream crap. Do you see any node called like this? Also, drop unused label. > + compatible = "qcom,spmi-mbg-tm"; > + reg = <0xd700>; > + interrupts = <0x1 0xd7 0x0 IRQ_TYPE_EDGE_RISING>; This suggests it is not on SPMI bus but part of PMIC. Why doing something entirely different then entire Linux kernel? Do not use downstream as template, that's a no go. Best regards, Krzysztof
On 12.07.2024 7:25 PM, Krzysztof Kozlowski wrote: > On 12/07/2024 14:43, Satya Priya Kakitapalli wrote: >> Add bindings support for the MBG Temp alarm peripheral found on >> pm8775 pmics. >> >> Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com> >> --- Please also describe what MBG stands for and how it differs from the currently supported temp alarm that's been in use for the past 10 years on various PMICs Konrad
On Fri, Jul 12, 2024 at 06:13:29PM GMT, Satya Priya Kakitapalli wrote: > Add bindings support for the MBG Temp alarm peripheral found on > pm8775 pmics. > > Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com> > --- > .../bindings/thermal/qcom-spmi-mbg-tm.yaml | 63 ++++++++++++++++++++++ > 1 file changed, 63 insertions(+) > > diff --git a/Documentation/devicetree/bindings/thermal/qcom-spmi-mbg-tm.yaml b/Documentation/devicetree/bindings/thermal/qcom-spmi-mbg-tm.yaml > new file mode 100644 > index 000000000000..9b6d1bc34a11 > --- /dev/null > +++ b/Documentation/devicetree/bindings/thermal/qcom-spmi-mbg-tm.yaml > @@ -0,0 +1,63 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/thermal/qcom-spmi-mbg-tm.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Qualcomm Technologies, Inc. SPMI PMIC MBG Thermal Monitoring > + > +maintainers: > + - Satya Priya Kakitapalli <quic_skakitap@quicinc.com> > + > +description: | > + Qualcomm's thermal driver for the MBG thermal monitoring device. I was hoping for the binding to tell me, what is MBG. But they don't. Could you please fix that? > + > +properties: > + compatible: > + const: qcom,spmi-mbg-tm
diff --git a/Documentation/devicetree/bindings/thermal/qcom-spmi-mbg-tm.yaml b/Documentation/devicetree/bindings/thermal/qcom-spmi-mbg-tm.yaml new file mode 100644 index 000000000000..9b6d1bc34a11 --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/qcom-spmi-mbg-tm.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/thermal/qcom-spmi-mbg-tm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. SPMI PMIC MBG Thermal Monitoring + +maintainers: + - Satya Priya Kakitapalli <quic_skakitap@quicinc.com> + +description: | + Qualcomm's thermal driver for the MBG thermal monitoring device. + +properties: + compatible: + const: qcom,spmi-mbg-tm + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + io-channels: + description: + IIO channel specifier for the ADC channel, which reports + chip die temperature. + + io-channel-names: + const: thermal + + "#thermal-sensor-cells": + const: 0 + +required: + - compatible + - reg + - interrupts + - io-channels + - io-channel-names + - "#thermal-sensor-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/iio/adc/qcom,spmi-adc5-gen3-pm8775.h> + spmi_bus { + #address-cells = <1>; + #size-cells = <0>; + + pm8775_sail_1_tz: qcom,mbg-tm@d700 { + compatible = "qcom,spmi-mbg-tm"; + reg = <0xd700>; + interrupts = <0x1 0xd7 0x0 IRQ_TYPE_EDGE_RISING>; + io-channels = <&pm8775_1_adc PM8775_ADC5_GEN3_DIE_TEMP(1)>; + io-channel-names = "thermal"; + #thermal-sensor-cells = <0>; + }; + }; +...
Add bindings support for the MBG Temp alarm peripheral found on pm8775 pmics. Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com> --- .../bindings/thermal/qcom-spmi-mbg-tm.yaml | 63 ++++++++++++++++++++++ 1 file changed, 63 insertions(+)