diff mbox series

[3/8] reset: amlogic: split the device and platform probe

Message ID 20240710162526.2341399-4-jbrunet@baylibre.com (mailing list archive)
State Superseded
Headers show
Series reset: amlogic: move audio reset drivers out of CCF | expand

Commit Message

Jerome Brunet July 10, 2024, 4:25 p.m. UTC
To prepare the addition of the auxiliary device support, split
out the device probe from the probe of the platform device.

The device probe will be common to both the platform and auxiliary
driver.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
 drivers/reset/reset-meson.c | 55 +++++++++++++++++++++++--------------
 1 file changed, 34 insertions(+), 21 deletions(-)

Comments

Stephen Boyd July 10, 2024, 10:38 p.m. UTC | #1
Quoting Jerome Brunet (2024-07-10 09:25:12)
> diff --git a/drivers/reset/reset-meson.c b/drivers/reset/reset-meson.c
> index 59126c9f194a..fec55321b52b 100644
> --- a/drivers/reset/reset-meson.c
> +++ b/drivers/reset/reset-meson.c
> @@ -87,6 +87,27 @@ static const struct reset_control_ops meson_reset_ops = {
>         .deassert       = meson_reset_deassert,
>  };
>  
> +static int meson_reset_probe(struct device *dev, struct regmap *map,
> +                            const struct meson_reset_param *param)
> +{
> +       unsigned int stride = regmap_get_reg_stride(map);
> +       struct meson_reset *data;
> +
> +       data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
> +       if (!data)
> +               return -ENOMEM;
> +
> +       data->param = param;
> +       data->map = map;
> +       data->rcdev.owner = dev->driver->owner;
> +       data->rcdev.nr_resets = param->reg_count * BITS_PER_BYTE
> +               * stride;

Nitpick: I'd just put this on the line above

> +       data->rcdev.ops = &meson_reset_ops;
> +       data->rcdev.of_node = dev->of_node;
> +
> +       return devm_reset_controller_register(dev, &data->rcdev);
> +}
> +
>  static const struct meson_reset_param meson8b_param = {
>         .reg_count      = 8,
>         .reset_offset   = 0x0,
> @@ -125,46 +146,38 @@ static const struct regmap_config regmap_config = {
>         .reg_stride = 4,
>  };
>  
> -static int meson_reset_probe(struct platform_device *pdev)
> +static int meson_reset_pltf_probe(struct platform_device *pdev)
>  {
> +
> +       const struct meson_reset_param *param;
>         struct device *dev = &pdev->dev;
> -       struct meson_reset *data;
> +       struct regmap *map;
>         void __iomem *base;
>  
> -       data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
> -       if (!data)
> -               return -ENOMEM;
> -
>         base = devm_platform_ioremap_resource(pdev, 0);
>         if (IS_ERR(base))
>                 return PTR_ERR(base);
>  
> -       data->param = of_device_get_match_data(dev);
> -       if (!data->param)
> +       param = of_device_get_match_data(dev);

Just use device_get_match_data()? I don't see any need to use DT
specific APIs.

> +       if (!param)
>                 return -ENODEV;
>  
> -       data->map = devm_regmap_init_mmio(dev, base, &regmap_config);
> -       if (IS_ERR(data->map))
> -               return dev_err_probe(dev, PTR_ERR(data->map),
> +       map = devm_regmap_init_mmio(dev, base, &regmap_config);
> +       if (IS_ERR(map))
> +               return dev_err_probe(dev, PTR_ERR(map),
>                                      "can't init regmap mmio region\n");
>
Jan Dakinevich July 15, 2024, 10:48 p.m. UTC | #2
On 7/10/24 19:25, Jerome Brunet wrote:
> To prepare the addition of the auxiliary device support, split
> out the device probe from the probe of the platform device.
> 
> The device probe will be common to both the platform and auxiliary
> driver.
> 
> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
> ---
>  drivers/reset/reset-meson.c | 55 +++++++++++++++++++++++--------------
>  1 file changed, 34 insertions(+), 21 deletions(-)
> 
> diff --git a/drivers/reset/reset-meson.c b/drivers/reset/reset-meson.c
> index 59126c9f194a..fec55321b52b 100644
> --- a/drivers/reset/reset-meson.c
> +++ b/drivers/reset/reset-meson.c
> @@ -87,6 +87,27 @@ static const struct reset_control_ops meson_reset_ops = {
>  	.deassert	= meson_reset_deassert,
>  };
>  
> +static int meson_reset_probe(struct device *dev, struct regmap *map,
> +			     const struct meson_reset_param *param)
> +{
> +	unsigned int stride = regmap_get_reg_stride(map);
> +	struct meson_reset *data;
> +
> +	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
> +	if (!data)
> +		return -ENOMEM;
> +
> +	data->param = param;
> +	data->map = map;
> +	data->rcdev.owner = dev->driver->owner;
> +	data->rcdev.nr_resets = param->reg_count * BITS_PER_BYTE
> +		* stride;
> +	data->rcdev.ops = &meson_reset_ops;
> +	data->rcdev.of_node = dev->of_node;

It will be good to add here something like this. Later it would help in
reset debugging.

data->rcdev.dev = dev;

> +
> +	return devm_reset_controller_register(dev, &data->rcdev);
> +}
> +
>  static const struct meson_reset_param meson8b_param = {
>  	.reg_count	= 8,
>  	.reset_offset	= 0x0,
> @@ -125,46 +146,38 @@ static const struct regmap_config regmap_config = {
>  	.reg_stride = 4,
>  };
>  
> -static int meson_reset_probe(struct platform_device *pdev)
> +static int meson_reset_pltf_probe(struct platform_device *pdev)
>  {
> +
> +	const struct meson_reset_param *param;
>  	struct device *dev = &pdev->dev;
> -	struct meson_reset *data;
> +	struct regmap *map;
>  	void __iomem *base;
>  
> -	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
> -	if (!data)
> -		return -ENOMEM;
> -
>  	base = devm_platform_ioremap_resource(pdev, 0);
>  	if (IS_ERR(base))
>  		return PTR_ERR(base);
>  
> -	data->param = of_device_get_match_data(dev);
> -	if (!data->param)
> +	param = of_device_get_match_data(dev);
> +	if (!param)
>  		return -ENODEV;
>  
> -	data->map = devm_regmap_init_mmio(dev, base, &regmap_config);
> -	if (IS_ERR(data->map))
> -		return dev_err_probe(dev, PTR_ERR(data->map),
> +	map = devm_regmap_init_mmio(dev, base, &regmap_config);
> +	if (IS_ERR(map))
> +		return dev_err_probe(dev, PTR_ERR(map),
>  				     "can't init regmap mmio region\n");
>  
> -	data->rcdev.owner = THIS_MODULE;
> -	data->rcdev.nr_resets = data->param->reg_count * BITS_PER_BYTE
> -		* regmap_config.reg_stride;
> -	data->rcdev.ops = &meson_reset_ops;
> -	data->rcdev.of_node = dev->of_node;
> -
> -	return devm_reset_controller_register(dev, &data->rcdev);
> +	return meson_reset_probe(dev, map, param);
>  }
>  
> -static struct platform_driver meson_reset_driver = {
> -	.probe	= meson_reset_probe,
> +static struct platform_driver meson_reset_pltf_driver = {
> +	.probe	= meson_reset_pltf_probe,
>  	.driver = {
>  		.name		= "meson_reset",
>  		.of_match_table	= meson_reset_dt_ids,
>  	},
>  };
> -module_platform_driver(meson_reset_driver);
> +module_platform_driver(meson_reset_pltf_driver);
>  
>  MODULE_DESCRIPTION("Amlogic Meson Reset Controller driver");
>  MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>");
Jerome Brunet July 16, 2024, 12:17 p.m. UTC | #3
On Tue 16 Jul 2024 at 01:48, Jan Dakinevich <jan.dakinevich@salutedevices.com> wrote:

> On 7/10/24 19:25, Jerome Brunet wrote:
>> To prepare the addition of the auxiliary device support, split
>> out the device probe from the probe of the platform device.
>> 
>> The device probe will be common to both the platform and auxiliary
>> driver.
>> 
>> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
>> ---
>>  drivers/reset/reset-meson.c | 55 +++++++++++++++++++++++--------------
>>  1 file changed, 34 insertions(+), 21 deletions(-)
>> 
>> diff --git a/drivers/reset/reset-meson.c b/drivers/reset/reset-meson.c
>> index 59126c9f194a..fec55321b52b 100644
>> --- a/drivers/reset/reset-meson.c
>> +++ b/drivers/reset/reset-meson.c
>> @@ -87,6 +87,27 @@ static const struct reset_control_ops meson_reset_ops = {
>>  	.deassert	= meson_reset_deassert,
>>  };
>>  
>> +static int meson_reset_probe(struct device *dev, struct regmap *map,
>> +			     const struct meson_reset_param *param)
>> +{
>> +	unsigned int stride = regmap_get_reg_stride(map);
>> +	struct meson_reset *data;
>> +
>> +	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
>> +	if (!data)
>> +		return -ENOMEM;
>> +
>> +	data->param = param;
>> +	data->map = map;
>> +	data->rcdev.owner = dev->driver->owner;
>> +	data->rcdev.nr_resets = param->reg_count * BITS_PER_BYTE
>> +		* stride;
>> +	data->rcdev.ops = &meson_reset_ops;
>> +	data->rcdev.of_node = dev->of_node;
>
> It will be good to add here something like this. Later it would help in
> reset debugging.
>
> data->rcdev.dev = dev;

That is not the purpose of this change.
I'm merely re-organizing exiting code, not changing it.

Plus, if you refering to rcdev_name(), we already populate
rcdev->of_node, so a name is provided.

>
>> +
>> +	return devm_reset_controller_register(dev, &data->rcdev);
>> +}
>> +
>>  static const struct meson_reset_param meson8b_param = {
>>  	.reg_count	= 8,
>>  	.reset_offset	= 0x0,
>> @@ -125,46 +146,38 @@ static const struct regmap_config regmap_config = {
>>  	.reg_stride = 4,
>>  };
>>  
>> -static int meson_reset_probe(struct platform_device *pdev)
>> +static int meson_reset_pltf_probe(struct platform_device *pdev)
>>  {
>> +
>> +	const struct meson_reset_param *param;
>>  	struct device *dev = &pdev->dev;
>> -	struct meson_reset *data;
>> +	struct regmap *map;
>>  	void __iomem *base;
>>  
>> -	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
>> -	if (!data)
>> -		return -ENOMEM;
>> -
>>  	base = devm_platform_ioremap_resource(pdev, 0);
>>  	if (IS_ERR(base))
>>  		return PTR_ERR(base);
>>  
>> -	data->param = of_device_get_match_data(dev);
>> -	if (!data->param)
>> +	param = of_device_get_match_data(dev);
>> +	if (!param)
>>  		return -ENODEV;
>>  
>> -	data->map = devm_regmap_init_mmio(dev, base, &regmap_config);
>> -	if (IS_ERR(data->map))
>> -		return dev_err_probe(dev, PTR_ERR(data->map),
>> +	map = devm_regmap_init_mmio(dev, base, &regmap_config);
>> +	if (IS_ERR(map))
>> +		return dev_err_probe(dev, PTR_ERR(map),
>>  				     "can't init regmap mmio region\n");
>>  
>> -	data->rcdev.owner = THIS_MODULE;
>> -	data->rcdev.nr_resets = data->param->reg_count * BITS_PER_BYTE
>> -		* regmap_config.reg_stride;
>> -	data->rcdev.ops = &meson_reset_ops;
>> -	data->rcdev.of_node = dev->of_node;
>> -
>> -	return devm_reset_controller_register(dev, &data->rcdev);
>> +	return meson_reset_probe(dev, map, param);
>>  }
>>  
>> -static struct platform_driver meson_reset_driver = {
>> -	.probe	= meson_reset_probe,
>> +static struct platform_driver meson_reset_pltf_driver = {
>> +	.probe	= meson_reset_pltf_probe,
>>  	.driver = {
>>  		.name		= "meson_reset",
>>  		.of_match_table	= meson_reset_dt_ids,
>>  	},
>>  };
>> -module_platform_driver(meson_reset_driver);
>> +module_platform_driver(meson_reset_pltf_driver);
>>  
>>  MODULE_DESCRIPTION("Amlogic Meson Reset Controller driver");
>>  MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>");
diff mbox series

Patch

diff --git a/drivers/reset/reset-meson.c b/drivers/reset/reset-meson.c
index 59126c9f194a..fec55321b52b 100644
--- a/drivers/reset/reset-meson.c
+++ b/drivers/reset/reset-meson.c
@@ -87,6 +87,27 @@  static const struct reset_control_ops meson_reset_ops = {
 	.deassert	= meson_reset_deassert,
 };
 
+static int meson_reset_probe(struct device *dev, struct regmap *map,
+			     const struct meson_reset_param *param)
+{
+	unsigned int stride = regmap_get_reg_stride(map);
+	struct meson_reset *data;
+
+	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->param = param;
+	data->map = map;
+	data->rcdev.owner = dev->driver->owner;
+	data->rcdev.nr_resets = param->reg_count * BITS_PER_BYTE
+		* stride;
+	data->rcdev.ops = &meson_reset_ops;
+	data->rcdev.of_node = dev->of_node;
+
+	return devm_reset_controller_register(dev, &data->rcdev);
+}
+
 static const struct meson_reset_param meson8b_param = {
 	.reg_count	= 8,
 	.reset_offset	= 0x0,
@@ -125,46 +146,38 @@  static const struct regmap_config regmap_config = {
 	.reg_stride = 4,
 };
 
-static int meson_reset_probe(struct platform_device *pdev)
+static int meson_reset_pltf_probe(struct platform_device *pdev)
 {
+
+	const struct meson_reset_param *param;
 	struct device *dev = &pdev->dev;
-	struct meson_reset *data;
+	struct regmap *map;
 	void __iomem *base;
 
-	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
-	if (!data)
-		return -ENOMEM;
-
 	base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(base))
 		return PTR_ERR(base);
 
-	data->param = of_device_get_match_data(dev);
-	if (!data->param)
+	param = of_device_get_match_data(dev);
+	if (!param)
 		return -ENODEV;
 
-	data->map = devm_regmap_init_mmio(dev, base, &regmap_config);
-	if (IS_ERR(data->map))
-		return dev_err_probe(dev, PTR_ERR(data->map),
+	map = devm_regmap_init_mmio(dev, base, &regmap_config);
+	if (IS_ERR(map))
+		return dev_err_probe(dev, PTR_ERR(map),
 				     "can't init regmap mmio region\n");
 
-	data->rcdev.owner = THIS_MODULE;
-	data->rcdev.nr_resets = data->param->reg_count * BITS_PER_BYTE
-		* regmap_config.reg_stride;
-	data->rcdev.ops = &meson_reset_ops;
-	data->rcdev.of_node = dev->of_node;
-
-	return devm_reset_controller_register(dev, &data->rcdev);
+	return meson_reset_probe(dev, map, param);
 }
 
-static struct platform_driver meson_reset_driver = {
-	.probe	= meson_reset_probe,
+static struct platform_driver meson_reset_pltf_driver = {
+	.probe	= meson_reset_pltf_probe,
 	.driver = {
 		.name		= "meson_reset",
 		.of_match_table	= meson_reset_dt_ids,
 	},
 };
-module_platform_driver(meson_reset_driver);
+module_platform_driver(meson_reset_pltf_driver);
 
 MODULE_DESCRIPTION("Amlogic Meson Reset Controller driver");
 MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>");