diff mbox series

[1/3] dt-bindings: timer: ti,davinci-timer: convert to dtschema

Message ID 20240721170840.15569-2-five231003@gmail.com (mailing list archive)
State New
Headers show
Series ti: davinci, keystone: txt to yaml | expand

Commit Message

Kousik Sanagavarapu July 21, 2024, 4:28 p.m. UTC 
Convert txt binding of TI's DaVinci timer to dtschema to allow for
validation.

Signed-off-by: Kousik Sanagavarapu <five231003@gmail.com>
---
 .../bindings/timer/ti,davinci-timer.txt       | 37 ----------
 .../bindings/timer/ti,davinci-timer.yaml      | 68 +++++++++++++++++++
 2 files changed, 68 insertions(+), 37 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/timer/ti,davinci-timer.txt
 create mode 100644 Documentation/devicetree/bindings/timer/ti,davinci-timer.yaml

Comments

Krzysztof Kozlowski July 22, 2024, 8:11 a.m. UTC | #1 
On 21/07/2024 18:28, Kousik Sanagavarapu wrote:
> Convert txt binding of TI's DaVinci timer to dtschema to allow for
> validation.
> 


> diff --git a/Documentation/devicetree/bindings/timer/ti,davinci-timer.yaml b/Documentation/devicetree/bindings/timer/ti,davinci-timer.yaml
> new file mode 100644
> index 000000000000..615ceb8f30af
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/timer/ti,davinci-timer.yaml

Use compatible as filename.

> @@ -0,0 +1,68 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/timer/ti,davinci-timer.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: TI DaVinci Timer
> +
> +maintainers:
> +  - Kousik Sanagavarapu <five231003@gmail.com>
> +
> +description: |
> +

Drop blank line

> +  This is a 64-bit timer found on TI's DaVinci architecture devices. The timer
> +  can be configured as a general-purpose 64-bit timer, dual general-purpose
> +  32-bit timers. When configured as dual 32-bit timers, each half can operate
> +  in conjunction (chain mode) or independently (unchained mode) of each other.
> +
> +  The timer is a free running up-counter and can generate interrupts when the
> +  counter reaches preset counter values.
> +
> +properties:
> +  compatible:
> +    const: ti,da830-timer
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    minItems: 2

Missing maxItems

> +
> +  interrupt-names:
> +    minItems: 2
> +    items:
> +      - const: tint12
> +      - const: tint34
> +      - const: cmpint0
> +      - const: cmpint1
> +      - const: cmpint2
> +      - const: cmpint3
> +      - const: cmpint4
> +      - const: cmpint5
> +      - const: cmpint6
> +      - const: cmpint7

Best regards,
Krzysztof
Kousik Sanagavarapu July 22, 2024, 12:59 p.m. UTC | #2 
On Mon, Jul 22, 2024 at 10:11:45AM +0200, Krzysztof Kozlowski wrote:
> On 21/07/2024 18:28, Kousik Sanagavarapu wrote:
> > +++ b/Documentation/devicetree/bindings/timer/ti,davinci-timer.yaml
> 
> Use compatible as filename.
> 
> > +description: |
> > +
> 
> Drop blank line
> 
> > +  interrupts:
> > +    minItems: 2
> 
> Missing maxItems

Thanks for pointing out.  Will fix in v2.
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/timer/ti,davinci-timer.txt b/Documentation/devicetree/bindings/timer/ti,davinci-timer.txt
deleted file mode 100644
index 29bf91ccf5b7..000000000000
--- a/Documentation/devicetree/bindings/timer/ti,davinci-timer.txt
+++ /dev/null
@@ -1,37 +0,0 @@ 
-* Device tree bindings for Texas Instruments DaVinci timer
-
-This document provides bindings for the 64-bit timer in the DaVinci
-architecture devices. The timer can be configured as a general-purpose 64-bit
-timer, dual general-purpose 32-bit timers. When configured as dual 32-bit
-timers, each half can operate in conjunction (chain mode) or independently
-(unchained mode) of each other.
-
-The timer is a free running up-counter and can generate interrupts when the
-counter reaches preset counter values.
-
-Also see ../watchdog/davinci-wdt.txt for timers that are configurable as
-watchdog timers.
-
-Required properties:
-
-- compatible : should be "ti,da830-timer".
-- reg : specifies base physical address and count of the registers.
-- interrupts : interrupts generated by the timer.
-- interrupt-names: should be "tint12", "tint34", "cmpint0", "cmpint1",
-		   "cmpint2", "cmpint3", "cmpint4", "cmpint5", "cmpint6",
-		   "cmpint7" ("cmpintX" may be omitted if not present in the
-		   hardware).
-- clocks : the clock feeding the timer clock.
-
-Example:
-
-	clocksource: timer@20000 {
-		compatible = "ti,da830-timer";
-		reg = <0x20000 0x1000>;
-		interrupts = <21>, <22>, <74>, <75>, <76>, <77>, <78>, <79>,
-			     <80>, <81>;
-		interrupt-names = "tint12", "tint34", "cmpint0", "cmpint1",
-				  "cmpint2", "cmpint3", "cmpint4", "cmpint5",
-				  "cmpint6", "cmpint7";
-		clocks = <&pll0_auxclk>;
-	};
diff --git a/Documentation/devicetree/bindings/timer/ti,davinci-timer.yaml b/Documentation/devicetree/bindings/timer/ti,davinci-timer.yaml
new file mode 100644
index 000000000000..615ceb8f30af
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/ti,davinci-timer.yaml
@@ -0,0 +1,68 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/ti,davinci-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI DaVinci Timer
+
+maintainers:
+  - Kousik Sanagavarapu <five231003@gmail.com>
+
+description: |
+
+  This is a 64-bit timer found on TI's DaVinci architecture devices. The timer
+  can be configured as a general-purpose 64-bit timer, dual general-purpose
+  32-bit timers. When configured as dual 32-bit timers, each half can operate
+  in conjunction (chain mode) or independently (unchained mode) of each other.
+
+  The timer is a free running up-counter and can generate interrupts when the
+  counter reaches preset counter values.
+
+properties:
+  compatible:
+    const: ti,da830-timer
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 2
+
+  interrupt-names:
+    minItems: 2
+    items:
+      - const: tint12
+      - const: tint34
+      - const: cmpint0
+      - const: cmpint1
+      - const: cmpint2
+      - const: cmpint3
+      - const: cmpint4
+      - const: cmpint5
+      - const: cmpint6
+      - const: cmpint7
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    timer@20000 {
+        compatible = "ti,da830-timer";
+        reg = <0x20000 0x1000>;
+        interrupts = <21>, <22>;
+        interrupt-names = "tint12", "tint34";
+        clocks = <&pll0_auxclk>;
+    };
+
+...