| Message ID | 38559102c729a811dc8a85f6c7cee07228cffd3e.1721739769.git.daniel@makrotopia.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [net] net: ethernet: mtk_eth_soc: drop clocks unused by Ethernet driver | expand |
Il 23/07/24 15:04, Daniel Golle ha scritto: > Clocks for SerDes and PHY are going to be handled by standalone drivers > for each of those hardware components. Drop them from the Ethernet driver. > > Fixes: 445eb6448ed3 ("net: ethernet: mtk_eth_soc: add basic support for MT7988 SoC") > Signed-off-by: Daniel Golle <daniel@makrotopia.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
On Tue, Jul 23, 2024 at 02:04:02PM +0100, Daniel Golle wrote: > Clocks for SerDes and PHY are going to be handled by standalone drivers > for each of those hardware components. Drop them from the Ethernet driver. Please could you explain in more details how this does not break backwards compatibility. Should there also be a depends on, to ensure the new driver is loaded? Will old DT blobs still work? Thanks Andrew
Hi Andrew, On Tue, Jul 23, 2024 at 08:35:16PM +0200, Andrew Lunn wrote: > On Tue, Jul 23, 2024 at 02:04:02PM +0100, Daniel Golle wrote: > > Clocks for SerDes and PHY are going to be handled by standalone drivers > > for each of those hardware components. Drop them from the Ethernet driver. > > Please could you explain in more details how this does not break > backwards compatibility. Should there also be a depends on, to ensure > the new driver is loaded? Will old DT blobs still work? At this stage the Ethernet driver only supports the first MAC which is hard-wired to the built-in DSA switch. The clocks which are being removed for this patch are responsible for the for the SerDes PCS and PHYs used for the 2nd and 3rd MAC which are anyway not yet supported. Those clocks are basically a left-over from the implementation found in MediaTek's SDK which does all that inside the Ethernet driver and using lots of syscon regmaps to access the various parts of the SoC. This has been deemed unsuitable for inclusion in upstream Linux[1] and I was asked to implement standalone PHY, CLK and PCS drivers instead, which is obviously more clean and also results in the device tree being more understandable. By now, a CLK driver and a PHY driver (PHY as in drivers/phy, not drivers/net/phy) has landed in upstream Linux([2], [3]), I'm currently finalizing the PCS drivers which are going to be in charge of handling the clocks which are now going to be removed from the Ethernet driver. tl;dr: The clocks were added by mistake and features of the SoC using them are up to now unsupported by vanilla Linux. [1]: https://patchwork.kernel.org/comment/25517462/ [2]: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=4b4719437d85f0173d344f2c76fa1a5b7f7d184b [3]: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=ac4aa9dbc702329c447d968325b055af84ae1b59
On Tue, Jul 23, 2024 at 10:47:00PM +0100, Daniel Golle wrote: > Hi Andrew, > > On Tue, Jul 23, 2024 at 08:35:16PM +0200, Andrew Lunn wrote: > > On Tue, Jul 23, 2024 at 02:04:02PM +0100, Daniel Golle wrote: > > > Clocks for SerDes and PHY are going to be handled by standalone drivers > > > for each of those hardware components. Drop them from the Ethernet driver. > > > > Please could you explain in more details how this does not break > > backwards compatibility. Should there also be a depends on, to ensure > > the new driver is loaded? Will old DT blobs still work? > > At this stage the Ethernet driver only supports the first MAC which > is hard-wired to the built-in DSA switch. > The clocks which are being removed for this patch are responsible for > the for the SerDes PCS and PHYs used for the 2nd and 3rd MAC which > are anyway not yet supported. O.K. This last part, not yet supported, would of been good to have in the commit message. It then makes it clear backwards compatibility is not an issue, it never worked in the first place. Thanks Andrew
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.h b/drivers/net/ethernet/mediatek/mtk_eth_soc.h index eb1708b43aa3..0d5225f1d3ee 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h @@ -724,12 +724,8 @@ enum mtk_clks_map { MTK_CLK_ETHWARP_WOCPU2, MTK_CLK_ETHWARP_WOCPU1, MTK_CLK_ETHWARP_WOCPU0, - MTK_CLK_TOP_USXGMII_SBUS_0_SEL, - MTK_CLK_TOP_USXGMII_SBUS_1_SEL, MTK_CLK_TOP_SGM_0_SEL, MTK_CLK_TOP_SGM_1_SEL, - MTK_CLK_TOP_XFI_PHY_0_XTAL_SEL, - MTK_CLK_TOP_XFI_PHY_1_XTAL_SEL, MTK_CLK_TOP_ETH_GMII_SEL, MTK_CLK_TOP_ETH_REFCK_50M_SEL, MTK_CLK_TOP_ETH_SYS_200M_SEL, @@ -800,19 +796,9 @@ enum mtk_clks_map { BIT_ULL(MTK_CLK_GP3) | BIT_ULL(MTK_CLK_XGP1) | \ BIT_ULL(MTK_CLK_XGP2) | BIT_ULL(MTK_CLK_XGP3) | \ BIT_ULL(MTK_CLK_CRYPTO) | \ - BIT_ULL(MTK_CLK_SGMII_TX_250M) | \ - BIT_ULL(MTK_CLK_SGMII_RX_250M) | \ - BIT_ULL(MTK_CLK_SGMII2_TX_250M) | \ - BIT_ULL(MTK_CLK_SGMII2_RX_250M) | \ BIT_ULL(MTK_CLK_ETHWARP_WOCPU2) | \ BIT_ULL(MTK_CLK_ETHWARP_WOCPU1) | \ BIT_ULL(MTK_CLK_ETHWARP_WOCPU0) | \ - BIT_ULL(MTK_CLK_TOP_USXGMII_SBUS_0_SEL) | \ - BIT_ULL(MTK_CLK_TOP_USXGMII_SBUS_1_SEL) | \ - BIT_ULL(MTK_CLK_TOP_SGM_0_SEL) | \ - BIT_ULL(MTK_CLK_TOP_SGM_1_SEL) | \ - BIT_ULL(MTK_CLK_TOP_XFI_PHY_0_XTAL_SEL) | \ - BIT_ULL(MTK_CLK_TOP_XFI_PHY_1_XTAL_SEL) | \ BIT_ULL(MTK_CLK_TOP_ETH_GMII_SEL) | \ BIT_ULL(MTK_CLK_TOP_ETH_REFCK_50M_SEL) | \ BIT_ULL(MTK_CLK_TOP_ETH_SYS_200M_SEL) | \
Clocks for SerDes and PHY are going to be handled by standalone drivers for each of those hardware components. Drop them from the Ethernet driver. Fixes: 445eb6448ed3 ("net: ethernet: mtk_eth_soc: add basic support for MT7988 SoC") Signed-off-by: Daniel Golle <daniel@makrotopia.org> --- The dt-bindings part has been taken care of already in commit cc349b0771dc dt-bindings: net: mediatek: remove wrongly added clocks and SerDes drivers/net/ethernet/mediatek/mtk_eth_soc.h | 14 -------------- 1 file changed, 14 deletions(-)