Message ID | 20240715-max77693-charger-extcon-v2-7-0838ffbb18c3@gmail.com (mailing list archive) |
---|---|
State | New |
Headers | show |
Series | power: supply: max77693: Toggle charging/OTG based on extcon status | expand |
On Mon, 15 Jul 2024, Artur Weber wrote: > Building upon the newly added extcon detection support, add detection > for USB OTG cables (EXTCON_USB_HOST type), and enable/disable the OTG > bits as needed. > > Signed-off-by: Artur Weber <aweber.kernel@gmail.com> > --- > Changes in v2: > - Added CHGIN OTG current limit value > - Squashed MFD header register changes into this commit > --- > drivers/power/supply/max77693_charger.c | 103 +++++++++++++++++++++++++++----- > include/linux/mfd/max77693-private.h | 5 ++ Acked-by: Lee Jones <lee@kernel.org> > 2 files changed, 94 insertions(+), 14 deletions(-) > > diff --git a/drivers/power/supply/max77693_charger.c b/drivers/power/supply/max77693_charger.c > index 2dc273dd96ee..34d68b1050d4 100644 > --- a/drivers/power/supply/max77693_charger.c > +++ b/drivers/power/supply/max77693_charger.c > @@ -669,6 +669,16 @@ static int max77693_reg_init(struct max77693_charger *chg) > if (ret) > return ret; > > + /* Set OTG current limit to 900 mA */ > + data = (0x1 << CHG_CNFG_02_OTG_ILIM_SHIFT); > + ret = regmap_update_bits(chg->max77693->regmap, > + MAX77693_CHG_REG_CHG_CNFG_02, > + CHG_CNFG_02_OTG_ILIM_MASK, data); > + if (ret) { > + dev_err(chg->dev, "Error setting OTG current limit: %d\n", ret); > + return ret; > + } > + > return max77693_set_charge_input_threshold_volt(chg, > chg->charge_input_threshold_volt); > } > @@ -690,11 +700,42 @@ static int max77693_set_charging(struct max77693_charger *chg, bool enable) > return ret; > } > > +static int max77693_set_otg(struct max77693_charger *chg, bool enable) > +{ > + struct regmap *regmap = chg->max77693->regmap; > + unsigned int data; > + bool is_enabled; > + int ret; > + > + ret = regmap_read(regmap, MAX77693_CHG_REG_CHG_CNFG_00, &data); > + if (ret) > + return ret; > + > + is_enabled = !!(data & CHG_CNFG_00_OTG_MASK); > + > + if (enable && !is_enabled) { > + /* OTG on, boost on, DIS_MUIC_CTRL on */ > + data |= CHG_CNFG_00_OTG_MASK | CHG_CNFG_00_BOOST_MASK \ > + | CHG_CNFG_00_DIS_MUIC_CTRL_MASK; > + > + } else if (!enable && is_enabled) { > + /* OTG off, boost off, DIS_MUIC_CTRL off */ > + data &= ~(CHG_CNFG_00_OTG_MASK | CHG_CNFG_00_BOOST_MASK \ > + | CHG_CNFG_00_DIS_MUIC_CTRL_MASK); > + } > + > + return regmap_write(chg->max77693->regmap, > + MAX77693_CHG_REG_CHG_CNFG_00, > + data); > +} > + > static void max77693_charger_extcon_work(struct work_struct *work) > { > struct max77693_charger *chg = container_of(work, struct max77693_charger, > cable.work); > struct extcon_dev *edev = chg->cable.edev; > + bool set_charging, set_otg; > + unsigned int current_limit; > int connector, state; > int ret; > > @@ -707,31 +748,61 @@ static void max77693_charger_extcon_work(struct work_struct *work) > > switch (connector) { > case EXTCON_CHG_USB_SDP: > - case EXTCON_CHG_USB_DCP: > case EXTCON_CHG_USB_CDP: > + case EXTCON_CHG_USB_SLOW: > + current_limit = 500000; /* 500 mA */ > + set_charging = true; > + set_otg = false; > + > + dev_info(chg->dev, "slow charging. connector type: %d\n", > + connector); > + break; > + case EXTCON_CHG_USB_DCP: > case EXTCON_CHG_USB_ACA: > case EXTCON_CHG_USB_FAST: > - case EXTCON_CHG_USB_SLOW: > case EXTCON_CHG_USB_PD: > - ret = max77693_set_charging(chg, true); > - if (ret) { > - dev_err(chg->dev, "failed to enable charging\n"); > - break; > - } > - dev_info(chg->dev, "charging. connector type: %d\n", > + current_limit = chg->fast_charge_current; > + set_charging = true; > + set_otg = false; > + > + dev_info(chg->dev, "fast charging. connector type: %d\n", > + connector); > + break; > + case EXTCON_USB_HOST: > + current_limit = 500000; /* 500 mA */ > + set_charging = false; > + set_otg = true; > + > + dev_info(chg->dev, "USB host. connector type: %d\n", > connector); > break; > default: > - ret = max77693_set_charging(chg, false); > - if (ret) { > - dev_err(chg->dev, "failed to disable charging\n"); > - break; > - } > - dev_info(chg->dev, "charging. connector type: %d\n", > + current_limit = 500000; /* 500 mA */ > + set_charging = false; > + set_otg = false; > + > + dev_info(chg->dev, "disconnected. connector type: %d\n", > connector); > break; > } > > + ret = max77693_set_current_limit(chg, current_limit); > + if (ret) { > + dev_err(chg->dev, "failed to set current limit (%d)\n", ret); > + goto out; > + } > + > + ret = max77693_set_charging(chg, set_charging); > + if (ret) { > + dev_err(chg->dev, "failed to set charging (%d)\n", ret); > + goto out; > + } > + > + ret = max77693_set_otg(chg, set_otg); > + if (ret) > + dev_err(chg->dev, "failed to set OTG (%d)\n", ret); > + > +out: > power_supply_changed(chg->charger); > } > > @@ -793,6 +864,10 @@ static int max77693_dt_init(struct device *dev, struct max77693_charger *chg) > &chg->batttery_overcurrent)) > chg->batttery_overcurrent = DEFAULT_BATTERY_OVERCURRENT; > > + if (of_property_read_u32(np, "maxim,fast-charge-current-microamp", > + &chg->fast_charge_current)) > + chg->fast_charge_current = DEFAULT_FAST_CHARGE_CURRENT; > + > if (of_property_read_u32(np, "maxim,charge-input-threshold-microvolt", > &chg->charge_input_threshold_volt)) > chg->charge_input_threshold_volt = > diff --git a/include/linux/mfd/max77693-private.h b/include/linux/mfd/max77693-private.h > index 4570646e2f33..313fcc3173f9 100644 > --- a/include/linux/mfd/max77693-private.h > +++ b/include/linux/mfd/max77693-private.h > @@ -209,7 +209,10 @@ enum max77693_charger_battery_state { > > /* MAX77693 CHG_CNFG_00 register */ > #define CHG_CNFG_00_CHG_MASK 0x1 > +#define CHG_CNFG_00_OTG_MASK 0x2 > #define CHG_CNFG_00_BUCK_MASK 0x4 > +#define CHG_CNFG_00_BOOST_MASK 0x8 > +#define CHG_CNFG_00_DIS_MUIC_CTRL_MASK 0x20 > > /* MAX77693_CHG_REG_CHG_CNFG_01 register */ > #define CHG_CNFG_01_FCHGTIME_SHIFT 0 > @@ -222,6 +225,8 @@ enum max77693_charger_battery_state { > /* MAX77693_CHG_REG_CHG_CNFG_02 register */ > #define CHG_CNFG_02_CC_SHIFT 0 > #define CHG_CNFG_02_CC_MASK 0x3F > +#define CHG_CNFG_02_OTG_ILIM_SHIFT 7 > +#define CHG_CNFG_02_OTG_ILIM_MASK 0x80 > > /* MAX77693_CHG_REG_CHG_CNFG_03 register */ > #define CHG_CNFG_03_TOITH_SHIFT 0 > > -- > 2.45.2 >
diff --git a/drivers/power/supply/max77693_charger.c b/drivers/power/supply/max77693_charger.c index 2dc273dd96ee..34d68b1050d4 100644 --- a/drivers/power/supply/max77693_charger.c +++ b/drivers/power/supply/max77693_charger.c @@ -669,6 +669,16 @@ static int max77693_reg_init(struct max77693_charger *chg) if (ret) return ret; + /* Set OTG current limit to 900 mA */ + data = (0x1 << CHG_CNFG_02_OTG_ILIM_SHIFT); + ret = regmap_update_bits(chg->max77693->regmap, + MAX77693_CHG_REG_CHG_CNFG_02, + CHG_CNFG_02_OTG_ILIM_MASK, data); + if (ret) { + dev_err(chg->dev, "Error setting OTG current limit: %d\n", ret); + return ret; + } + return max77693_set_charge_input_threshold_volt(chg, chg->charge_input_threshold_volt); } @@ -690,11 +700,42 @@ static int max77693_set_charging(struct max77693_charger *chg, bool enable) return ret; } +static int max77693_set_otg(struct max77693_charger *chg, bool enable) +{ + struct regmap *regmap = chg->max77693->regmap; + unsigned int data; + bool is_enabled; + int ret; + + ret = regmap_read(regmap, MAX77693_CHG_REG_CHG_CNFG_00, &data); + if (ret) + return ret; + + is_enabled = !!(data & CHG_CNFG_00_OTG_MASK); + + if (enable && !is_enabled) { + /* OTG on, boost on, DIS_MUIC_CTRL on */ + data |= CHG_CNFG_00_OTG_MASK | CHG_CNFG_00_BOOST_MASK \ + | CHG_CNFG_00_DIS_MUIC_CTRL_MASK; + + } else if (!enable && is_enabled) { + /* OTG off, boost off, DIS_MUIC_CTRL off */ + data &= ~(CHG_CNFG_00_OTG_MASK | CHG_CNFG_00_BOOST_MASK \ + | CHG_CNFG_00_DIS_MUIC_CTRL_MASK); + } + + return regmap_write(chg->max77693->regmap, + MAX77693_CHG_REG_CHG_CNFG_00, + data); +} + static void max77693_charger_extcon_work(struct work_struct *work) { struct max77693_charger *chg = container_of(work, struct max77693_charger, cable.work); struct extcon_dev *edev = chg->cable.edev; + bool set_charging, set_otg; + unsigned int current_limit; int connector, state; int ret; @@ -707,31 +748,61 @@ static void max77693_charger_extcon_work(struct work_struct *work) switch (connector) { case EXTCON_CHG_USB_SDP: - case EXTCON_CHG_USB_DCP: case EXTCON_CHG_USB_CDP: + case EXTCON_CHG_USB_SLOW: + current_limit = 500000; /* 500 mA */ + set_charging = true; + set_otg = false; + + dev_info(chg->dev, "slow charging. connector type: %d\n", + connector); + break; + case EXTCON_CHG_USB_DCP: case EXTCON_CHG_USB_ACA: case EXTCON_CHG_USB_FAST: - case EXTCON_CHG_USB_SLOW: case EXTCON_CHG_USB_PD: - ret = max77693_set_charging(chg, true); - if (ret) { - dev_err(chg->dev, "failed to enable charging\n"); - break; - } - dev_info(chg->dev, "charging. connector type: %d\n", + current_limit = chg->fast_charge_current; + set_charging = true; + set_otg = false; + + dev_info(chg->dev, "fast charging. connector type: %d\n", + connector); + break; + case EXTCON_USB_HOST: + current_limit = 500000; /* 500 mA */ + set_charging = false; + set_otg = true; + + dev_info(chg->dev, "USB host. connector type: %d\n", connector); break; default: - ret = max77693_set_charging(chg, false); - if (ret) { - dev_err(chg->dev, "failed to disable charging\n"); - break; - } - dev_info(chg->dev, "charging. connector type: %d\n", + current_limit = 500000; /* 500 mA */ + set_charging = false; + set_otg = false; + + dev_info(chg->dev, "disconnected. connector type: %d\n", connector); break; } + ret = max77693_set_current_limit(chg, current_limit); + if (ret) { + dev_err(chg->dev, "failed to set current limit (%d)\n", ret); + goto out; + } + + ret = max77693_set_charging(chg, set_charging); + if (ret) { + dev_err(chg->dev, "failed to set charging (%d)\n", ret); + goto out; + } + + ret = max77693_set_otg(chg, set_otg); + if (ret) + dev_err(chg->dev, "failed to set OTG (%d)\n", ret); + +out: power_supply_changed(chg->charger); } @@ -793,6 +864,10 @@ static int max77693_dt_init(struct device *dev, struct max77693_charger *chg) &chg->batttery_overcurrent)) chg->batttery_overcurrent = DEFAULT_BATTERY_OVERCURRENT; + if (of_property_read_u32(np, "maxim,fast-charge-current-microamp", + &chg->fast_charge_current)) + chg->fast_charge_current = DEFAULT_FAST_CHARGE_CURRENT; + if (of_property_read_u32(np, "maxim,charge-input-threshold-microvolt", &chg->charge_input_threshold_volt)) chg->charge_input_threshold_volt = diff --git a/include/linux/mfd/max77693-private.h b/include/linux/mfd/max77693-private.h index 4570646e2f33..313fcc3173f9 100644 --- a/include/linux/mfd/max77693-private.h +++ b/include/linux/mfd/max77693-private.h @@ -209,7 +209,10 @@ enum max77693_charger_battery_state { /* MAX77693 CHG_CNFG_00 register */ #define CHG_CNFG_00_CHG_MASK 0x1 +#define CHG_CNFG_00_OTG_MASK 0x2 #define CHG_CNFG_00_BUCK_MASK 0x4 +#define CHG_CNFG_00_BOOST_MASK 0x8 +#define CHG_CNFG_00_DIS_MUIC_CTRL_MASK 0x20 /* MAX77693_CHG_REG_CHG_CNFG_01 register */ #define CHG_CNFG_01_FCHGTIME_SHIFT 0 @@ -222,6 +225,8 @@ enum max77693_charger_battery_state { /* MAX77693_CHG_REG_CHG_CNFG_02 register */ #define CHG_CNFG_02_CC_SHIFT 0 #define CHG_CNFG_02_CC_MASK 0x3F +#define CHG_CNFG_02_OTG_ILIM_SHIFT 7 +#define CHG_CNFG_02_OTG_ILIM_MASK 0x80 /* MAX77693_CHG_REG_CHG_CNFG_03 register */ #define CHG_CNFG_03_TOITH_SHIFT 0
Building upon the newly added extcon detection support, add detection for USB OTG cables (EXTCON_USB_HOST type), and enable/disable the OTG bits as needed. Signed-off-by: Artur Weber <aweber.kernel@gmail.com> --- Changes in v2: - Added CHGIN OTG current limit value - Squashed MFD header register changes into this commit --- drivers/power/supply/max77693_charger.c | 103 +++++++++++++++++++++++++++----- include/linux/mfd/max77693-private.h | 5 ++ 2 files changed, 94 insertions(+), 14 deletions(-)